Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “root dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

On the gravitational stability of the interstellar medium in spiral arms

The dynamics of self-gravitating gaseous density perturbations in the tightly wound spiral-arm model of the forcing potential (Brown 1969) is investigated. The cloud ensemble of the cold phase of the interstellar medium is regarded as a collisional gas whose 'molecules' are the clouds themselves, and the dynamical evolution of density perturbations is calculated assuming this gas obeys a polytropic pressure-density law. It is suggested that the formation of extreme Population I objects found predominantly along the arms of Sb/Sc systems is regulated by an overall energy balance in the cloud fluid. A single parameter is found which appears to characterize the flow's gravitational response to perturbations; this spiral parameter, Q-sub-sp, differs from the Toomre Q parameter by a factor of the square root of the density enhancement at the shock. It is necessary but not sufficient that Q-sub-sp be less than unity for significant growth to occur.

Balbus, S. A.↗
NASA NTRS2008

Aeroservoelastic Testing of a Sidewall Mounted Free Flying Wind-Tunnel Model

A team comprised of the Air Force Research Laboratory (AFRL), Northrop Grumman, Lockheed Martin, and the NASA Langley Research Center conducted three j wind-tunnel tests in the Transonic Dynamics Tunnel to demonstrate active control technologies relevant to large, exible vehicles. In the rst of these three tests, a semispan, aeroelastically scaled, wind-tunnel model of a ying wing SensorCraft vehi- cle was mounted to a force balance to demonstrate gust load alleviation. In the second and third tests, the same wing was mated to a new, multi-degree-of-freedom, sidewall mount. This mount allowed the half-span model to translate vertically and pitch at the wing root, allowing better simulation of the full span vehicle's rigid-body modes. Gust Load Alleviation (GLA) and Body Freedom Flutter (BFF) suppression were successfully demonstrated. The rigid body degrees-of-freedom required that the model be own in the wind tunnel using an active control system. This risky mode of testing necessitated that a model arrestment system be integrated into the new mount. The safe and successful completion of these free-flying tests required the development and integration of custom hardware and software. This paper describes the many systems, software, and procedures that were developed as part of this effort.

Scott, Robert C.↗
NASA NTRS2014

Estimation of Crop Gross Primary Production (GPP): I. Impact of MODIS Observation Footprint and Impact of Vegetation BRDF Characteristics

Accurate estimation of gross primary production (GPP) is essential for carbon cycle and climate change studies. Three AmeriFlux crop sites of maize and soybean were selected for this study. Two of the sites were irrigated and the other one was rainfed. The normalized difference vegetation index (NDVI), the enhanced vegetation index (EVI), the green band chlorophyll index (CIgreen), and the green band wide dynamic range vegetation index (WDRVIgreen) were computed from the moderate resolution imaging spectroradiometer (MODIS) surface reflectance data. We examined the impacts of the MODIS observation footprint and the vegetation bidirectional reflectance distribution function (BRDF) on crop daily GPP estimation with the four spectral vegetation indices (VIs - NDVI, EVI, WDRVIgreen and CIgreen) where GPP was predicted with two linear models, with and without offset: GPP = a × VI × PAR and GPP = a × VI × PAR + b. Model performance was evaluated with coefficient of determination (R2), root mean square error (RMSE), and coefficient of variation (CV). The MODIS data were filtered into four categories and four experiments were conducted to assess the impacts. The first experiment included all observations. The second experiment only included observations with view zenith angle (VZA) ≤ 35◦ to constrain growth of the footprint size,which achieved a better grid cell match with the agricultural fields. The third experiment included only forward scatter observations with VZA ≤ 35◦. The fourth experiment included only backscatter observations with VZA ≤ 35◦. Overall, the EVI yielded the most consistently strong relationships to daily GPP under all examined conditions. The model GPP = a × VI × PAR + b had better performance than the model GPP = a × VI × PAR, and the offset was significant for most cases. Better performance was obtained for the irrigated field than its counterpart rainfed field. Comparison of experiment 2 vs. experiment 1 was used to examine the observation footprint impact whereas comparison of experiment 4 vs. experiment 3 was used to examine the BRDF impact. Changes in R2, RMSE,CV and changes in model coefficients "a" and "b" (experiment 2 vs. experiment 1; and experiment 4 vs. experiment 3) were indicators of the impacts. The second experiment produced better performance than the first experiment, increasing R2 (↑0.13) and reducing RMSE (↓0.68 g C m−2 d−1) and CV (↓9%). For each VI, the slope of GPP = a × VI × PAR in the second experiment for each crop type changed little while the slope and intercept of GPP = a × VI × PAR + b varied field by field. The CIgreen was least affected by the MODIS observation footprint in estimating crop daily GPP (R2, ↑0.08; RMSE, ↓0.42 g C m−2 d−1; and CV, ↓7%). Footprint most affected the NDVI (R2, ↑0.15; CV, ↓10%) and the EVI (RMSE, ↓0.84 g C m−2 d−1). The vegetation BRDF impact also caused variation of model performance and change of model coefficients. Significantly different slopes were obtained for forward vs. backscatter observations, especially for the CIgreen and the NDVI. Both the footprint impact and the BRDF impact varied with crop types, irrigation options, model options and VI options.

Chlorophyll↗
DOE OSTI2024

Wind farm structural response and wake dynamics for an evolving stable boundary layer: computational and experimental comparisons

Abstract. The wind turbine design process requires performing thousands of simulations for a wide range of inflow and control conditions, which necessitates computationally efficient yet time-accurate models, especially when considering wind farm settings. To this end, FAST.Farm is a dynamic-wake-meandering-based mid-fidelity engineering tool developed by the National Renewable Energy Laboratory targeted at accurately and efficiently predicting wind turbine power production and structural loading in wind farm settings, including wake interactions between turbines. This work is an extension of a study that addressed constructing a diurnal cycle evolution based on experimental data (Quon, 2024). Here, this inflow is used to validate the turbine structural and wake-meandering response between experimental data, FAST.Farm simulation results, and high-fidelity large-eddy simulation results from the coupled Simulator fOr Wind Farm Applications (SOWFA)–OpenFAST tool. The validation occurs within the nocturnal stable boundary layer when corresponding meteorological and turbine data are available. To this end, we compared the load results from FAST.Farm and SOWFA–OpenFAST to multi-turbine measurements from a subset of a full-scale wind farm. Computational predictions of blade-root and tower-base bending loads are compared to 10 min statistics of strain gauge measurements during 3.5 h of the evolving stable boundary layer, generally with good agreement. This time period coincided with an active wake-steering campaign of an upstream turbine, resulting in time-varying yaw positions of all turbines. Wake meandering was also compared between the computational solutions, generally with excellent agreement. Simulations were based on a high-fidelity precursor constructed from inflow measurements and using state-of-the-art mesoscale-to-microscale coupling.

17 WIND ENERGY↗
DOE OSTI2024

An ML-based terrestrial data fusion and augmentation framework to enable advanced understanding of the terrestrial carbon and water interactions

Soil moisture is essential to the terrestrial carbon and water cycles and land–atmosphere interactions. There are various types of soil moisture data, and each type has the distinct spatiotemporal strengths and limitations, depending on the diverse applications and retrieval methodologies of different data types (Li et al., in review; The PNNL-82151 FY23 Report). However, the limitations of different soil moisture data in terms of accuracy and spatiotemporal coverage hinder our ability to further understand the soil moisture dynamics across scales. To have a gap free soil moisture data product with a fine spatiotemporal coverage and vertical profiles, we train extreme gradient boosting (XGBoost) models by using (1) in-situ soil moisture measurements from the International Soil Moisture Network (ISMN), (2) soil moisture from the ECMWF reanalysis (ERA) at the 9 km and sub-daily spatiotemporal resolution, (3) the Daymet meteorological fields, and (4) data products that characterize surface conditions, including soil texture, organic content, topography, vegetation type, and rooting depth. We use the trained XGBoost models that have consistent performance across seven soil layers, i.e., 0–5 cm, 5–10 cm, 10–20 cm, 20–40 cm, 40–60 cm, 60–100 cm, and 100–200 cm, and the gridded model predictors to generate a soil moisture data at the 1 km and daily spatiotemporal resolution for the Continental United States (CONUS) from 2001–2020. This dataset can be broadly used for Earth system model benchmark, monitoring extreme weathers, making informed decisions regarding agriculture, water resource management, climate change mitigation, and ecosystem preservation.

58 GEOSCIENCES↗
DOE OSTI2018

Dynamic Reflection Behaviors of Weld Pool Surface in Pulsed GTAW

Here in this paper, a method was studied to determine the weld pool penetration based on the dynamic behaviors of the weld pool surface. To this end, relative works were per- formed to observe, measure, and analyze the development of a weld pool through the imaged laser matrix dots and correlate the changes in the imaged dots to the weld pool penetration. It was found that during partial joint penetration, the imaged dot matrix on the weld pool was clear and bright, but became fuzzier and dimmer when critical/complete joint penetration was reached. Results showed this was related to the root damping force in partial penetration, which obstructed the oscillation of the weld pool and made the surface relatively still for imaging. When critical/complete joint penetration was reached, the root damping force was diminished, and thus the pool surface oscillation was stronger, which led to dimmer and fuzzier images. By quantifying the relation between the image grayness variations with the penetration stages, a method was found for the automated control of the welding process.

42 ENGINEERING↗
NASA NTRS2021

SMD Technology Highlights

Two technology highlights from the Science Mission Directorate (SMD) Planetary Science Division and Biological and Physical Sciences division are featured: a) The Dynamic Radioisotope Power Systems Project (DRPS) may enable lunar science payloads to survive and thrive during the harsh lunar night. New robust DRPS have been built and delivered by industry and are in the process of being tested at NASA’s Glenn Research Center. b) NASA's Plant Water Management (PWM) project is demonstrating that even without the help of gravity, hydroponic plant watering methods can enable plant habitats aboard crewed or robotic space missions. On Earth, plants draw water upwards through the roots against gravity, via capillary action, which orients the plant and enables display of its canopy (foliage and branches) for optimal photosynthesis and transpiration. The plant grows above the nutrient-rich soil as the water U.S. Astronaut Kate Rubins poses with PWM after nearly doubling the science returns of the ISS experiment by drawing on her wealth of wet lab operations and handling experience—on Earth and in space.

RPS↗
NASA NTRSDate not supplied

Gust Load Alleviation Control and Gust Estimation for a High Aspect Ratio Wing Wind Tunnel Model

This paper presents the gust load alleviation (GLA) study of the aspect ratio 13.5 Common Research Model (CRM) wind-tunnel model. This study details the design of the GLA controller in preparation for wind-tunnel testing in the Transonic Dynamics Tunnel at NASA Langley Research Center. An aeroservolastic (ASE) model was first reduced using a model reduction method that takes advantage of the sinusoidal steady-state response. Then, the reduced model was used to design an extended-state Kalman filter which estimates the states and the sinusoidal gust input. The GLA control was then derived using the optimal control solution to a multi-objective cost function. The results of the GLA controller indicate a 75.6% reduction in wing-root strain while maintaining robust stability margins. The final paper will include performance under sub-optimal conditions, e.g., sensor noise, uncertainty in gust frequency, etc..

Christopher Forte↗
NASA NTRSDate not supplied

Gust Load Alleviation Control and Gust Estimation for a High Aspect Ratio Wing Wind Tunnel Model

This paper presents the gust load alleviation (GLA) study of the aspect ratio 13.5 Common Research Model (CRM) wind-tunnel model. This study details the design of the GLA controller in preparation for wind-tunnel testing in the Transonic Dynamics Tunnel at NASA Langley Research Center. An aeroservolastic (ASE) model is first reduced using a model reduction method that takes advantage of the sinusoidal steady-state response. Then, the reduced model is used to design an extended-state Kalman filter which estimates the states and the sinusoidal gust input. The GLA control is then derived using the optimal control solution to a multi-objective cost function. The results of the GLA controller indicate a 69.07% reduction in wing-root strain without sensor noise and 68.45% reduction with sensor noise, while maintaining robust stability margins. An adaptive GLA controller is developed for uncertain gust frequency and shows a 71.03% reduction in wing root strain compared to the non-adaptive control reduction of just 39.19%.

Christopher Forte↗
DOE OSTI2024

Distinguishing surface and bulk electromagnetism via their dynamics in an intrinsic magnetic topological insulator

The indirect exchange interaction between local magnetic moments via surface electrons has been long predicted to bolster the surface ferromagnetism in magnetic topological insulators (MTIs), which facilitates the quantum anomalous Hall effect. This unconventional effect is critical to determining the operating temperatures of future topotronic devices. However, the experimental confirmation of this mechanism remains elusive, especially in intrinsic MTIs. Here, we combine time-resolved photoemission spectroscopy with time-resolved magneto-optical Kerr effect measurements to elucidate the unique electromagnetism at the surface of an intrinsic MTI MnBi 2 Te 4 . Theoretical modeling based on 2D Ruderman-Kittel-Kasuya-Yosida interactions captures the initial quenching of a surface-rooted exchange gap within a factor of two but overestimates the bulk demagnetization by one order of magnitude. This mechanism directly explains the sizable gap in the quasi-2D electronic state and the nonzero residual magnetization in even-layer MnBi 2 Te 4 . Furthermore, it leads to efficient light-induced demagnetization comparable to state-of-the-art magnetophotonic crystals, promising an effective manipulation of magnetism and topological orders for future topotronics.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Coupling of magnetism and Dirac fermions in YbMnSb 2

Here, we report inelastic neutron scattering measurements of magnetic excitations in YbMnSb 2 , a low-carrier-density Dirac semimetal in which the antiferromagnetic Mn layers are interleaved with Sb layers that host Dirac fermions. We observe a measurable broadening of spin waves, which is consistent with substantial spin-fermion coupling. The spin-wave damping γ in YbMnSb 2 is roughly twice larger compared to that in a sister material, YbMnBi 2 , where an indication of a small damping consistent with a theoretical analysis of the spin-fermion coupling was reported. The interplane interaction between the Mn layers in YbMnSb 2 is also much stronger, suggesting that the interaction mechanism is rooted in the same spin-fermion coupling. Our results establish the systematics of spin-fermion interactions in layered magnetic Dirac materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Effects of nitrogen enrichment on tree carbon allocation: A global synthesis

Aim: Increased atmospheric nitrogen deposition may have profound effects on tree carbon allocation dynamics. However, a comprehensive understanding of how nitro-gen (N) enrichment influences carbon (C) allocation across plant functional processes and tree organs in individual trees remains elusive. Location: Global forest ecosystems. Time period: 1990–2018. Major taxa studied: Trees. Methods: We compiled data from 75 N addition experiments and conducted a meta-analysis to evaluate the responses of C source (photosynthesis), sinks (growth and respiration) and storage (non-structural carbohydrate concentrations) in different tree organs (foliage, above-ground wood and roots) to N enrichment. Results: N enrichment significantly enhanced C supply via photosynthesis (+39.6%, n = 128). C allocation to growth (biomass increment/production) significantly in-creased in foliage (+15.9%, n = 68) and above-ground wood (+31.8%, n = 64; bole, branch, stem and/or twig) with increasing N availability, but not in roots, whereas allocation increased in roots via increasing fine root turnover rate (+22.6%, n = 11). N fertilization significantly increased C allocation to respiration in above-ground wood (+46.6%, n = 12) and roots (+5.5%, n = 57), but not in foliage. N addition decreased non-structural carbohydrate (NSC) concentrations in foliage (-5.4%, n = 16) and roots (-5.0%, n = 21), but increased NSC in above-ground wood (+6.1%, n = 22). In addition, N enrichment effects were strongly affected by moderator variables. Main conclusions: Our results demonstrate that N addition increased C allocation to growth and respiration more strongly than C allocation to NSC storage, and increased C allocation to above-ground parts more strongly than to below-ground parts. Our results are useful for better understanding the response of tree functional processes at organ level to N enrichment. The existing data also reveal that more long-term ex-perimental studies on mature trees in tropical and boreal forests are urgently needed to provide a basis for forecasting tree responses to N enrichment at the global scale.

Li, Weibin↗
DOE OSTI2025

Fermi-Based Kinetic Model for the Sabatier Reaction: Sabatier Principle and Beyond It

The CO 2 methanation reaction (aka the Sabatier reaction) is one of the important carbon utilization technologies to reduce atmospheric greenhouse gases. In this study, kinetic modeling of the Sabatier reaction proceeding via the CO route has been presented by considering weak and strong chemisorption concepts rooted in electronic theory. Based on the single-route mechanism of the Sabatier reaction, the dependence of the reaction rate on the position of the catalyst Fermi level with respect to the antibonding states of the reagent (CO 2 ) and the product (CH 4 ), is demonstrated with the classic Sabatier volcano-shape. Furthermore, the model was applied to explain experimental results of reaction rates for Ni- and Ru-based catalytic systems and to understand origin of enhancement of turnover frequencies established for dynamic catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Heat Transfer and Pressure Loss of Additively Manufactured Internal Cooling Channels With Various Shapes

Abstract Additive manufacturing (AM) provides the ability to fabricate highly customized internal cooling passages that are relevant to gas turbine components. This experimental study examines the pressure loss and heat transfer performance of a range of fundamental channel shapes that were produced using direct metal laser sintering. Circular, hexagonal, pentagonal, elliptical, diamond, square, rectangular, trapezoidal, and triangular channel cross sections were investigated. To maintain the same convective surface area between shapes, the wetted perimeters of the channel cross sections were kept constant. Parallel computational fluid dynamic simulations were performed to understand the relationships in cooling performance between several channel shapes. Several characteristic length scales were evaluated to scale the pressure loss and heat transfer measurements. Among the channel shapes investigated, the diamond channel showed the lowest Nusselt number and friction factor. The pentagon exhibited a similar Nusselt number as the circular channel despite having a lower friction factor. There was no difference in scaling the friction factor or Nusselt number results of the different channel shapes between using the square root of cross-sectional area compared to hydraulic diameter as the characteristic length scale

Engineering↗
DOE OSTI2024

Assessing horizontal gene transfer in the rhizosphere of Brachypodium distachyon using fabricated ecosystems (EcoFABs)

ABSTRACT Horizontal gene transfer (HGT) is a major process by which genes are transferred between microbes in the rhizosphere. However, examining HGT remains challenging due to the complexity of mimicking conditions within the rhizosphere. Fabricated ecosystems (EcoFABs) have been used to investigate several complex processes in plant-associated environments. Here we show that EcoFABs are efficient tools to examine and measure HGT frequency in the rhizosphere. We provide the first demonstration of gene transfer via a triparental conjugation system in the Brachypodium distachyon rhizosphere in an EcoFAB using Pseudomonas putida KT2440 as both donor and recipient bacterial strain with the donor containing a mobilizable and non-self-transmissible plasmid. We observed that the frequency of plasmid transfer in the rhizosphere is potentially dependent on the plant developmental stage and the composition and amount of root exudates. The frequency of plasmid transfer also increased with higher numbers of donor cells. We demonstrate the transfer of plasmid from P. putida to another B. distachyon root colonizer, Burkholderia sp. OAS925, showing HGT within a rhizosphere microbial community. Environmental stresses also influenced the rate and efficiency of HGT in the rhizosphere between different species and genera. This study provides a robust workflow to evaluate transfer of engineered plasmids in the rhizosphere when such plasmids are potentially introduced in a field or other plant-associated environments. IMPORTANCE We report the use of EcoFABs to investigate the HGT process in a rhizosphere environment. It highlights the potential of EcoFABs in recapitulating the dynamic rhizosphere conditions as well as their versatility in studying plant-microbe interactions. This study also emphasizes the importance of studying the parameters impacting the HGT frequency. Several factors such as plant developmental stages, nutrient conditions, number of donor cells, and environmental stresses influence gene transfer within the rhizosphere microbial community. This study paves the way for future investigations into understanding the fate and movement of engineered plasmids in a field environment.

Priya, Shweta↗
NASA NTRS1988

Recursive dynamics of topological trees of rigid bodies via Kalman filtering and Bryson-Frazier smoothing

The inverse and forward dynamics problems for a set of rigid bodies connected by hinges to form a topological tree are solved by using recursive techniques from linear filtering and smoothing theory. An inward filtering sequence computes a set of constraint moments and forces. This is followed by an outward sequence to determine a corresponding set of angular and linear accelerations. An inward sequence begins at the tips of all of the terminal bodies of the tree and proceeds inwardly through all of the branches until it reaches the root. Similarly, an outward sequence begins at the root and propagates to all of the tree branches until it reaches the tips of the terminal bodies. The paper also provides an approach to evaluate recursively the composite multibody system inertia matrix and its inverse.

Rodriguez, G.↗
NASA NTRS2006

Microthruster Propulsion for the Space Technology 7 (ST7) Technology Demonstration Mission

For future applications to precision formation flying missions, NASA's New Millennium Program is scheduled to test colloid micro-Newton thrusters (CMNTs) on the ST7 technology demonstration mission. These CMNTs are part of a disturbance reduction system (DRS) on the ESA SMART-2 Spacecraft or LISA Pathfinder. The goal of the ST7 DRS is to demonstrate technologies necessary to meet the nanometer precision positioning control requirements of the LISA mission. In order to achieve these goals, the CMNTs are required to demonstrate a thrust resolution of less than 0.1 micro-N and a thrust noise of less than 0.1 micro-N/[square root]Hz for thrust levels between 5 and 30 micro-N. Developed by Busek Co. with support from JPL in testing an design, the CMNT has been developed over the last four years into a flight-ready microthrust system. The development, validation testing, and flight unit production of the CMNTs are described. Development tests and analysis include preliminary wear tests, propellant loading process verification, flow testing, and performance verification. Validation and flight unit verification includes thermal and structural analysis, life testing, thermal and dynamic load testing, and performance verification. Final delivery of the units is planned in 2007 with and planned launch and flight demonstration 2009.

microthruster↗
DOE OSTI2022

Thermal-Hydraulics Modeling and Simulations of Hot Pool Using the SAS-CFD Coupled Code

The main goal of this activity is to test the dynamic coupling of the SAS4A/SASSYS-1 (SAS) and CFD models, using a recently patched version of the SAS code intended to address an undocumented limitation that hindered the Versatile Test Reactor (VTR) simulation efforts in FY21. As described in previous VTR calculation reports, the undocumented limitation in SAS v5.4 does not allow the user to activate the CFD coupling option during restart calculations. Since the analysts were unaware of this limitation, prior SAS-CFD simulation results for the protected station blackout (PSBO) transient were erroneous. Root-cause analysis was performed to determine the cause of this undocumented limitation in SAS v5.4, the SAS software was updated in a new patch, and the SAS-CFD simulations were repeated with this patched software. The results of the SAS-CFD simulations documented in this report show that the software patch does address the cited issue, and that the patched software indeed supports the activation of the CFD coupling model in restart calculations. The SAS development team will determine the schedule for implementing the patch in an official software release. This report documents updated SAS-CFD simulations of the PSBO transient response in the VTR. The hot pool is modeled with the CFD code STAR-CCM+, which is coupled at the flow boundaries to the SAS model of the primary heat transport system. SAS computes the mass flow rate and temperature at each core subassembly outlet, the thermal insulation cavity bypass, and the IHX inlet windows. CFD in turn computes the absolute pressure and temperature at each of these boundaries. The SAS code will ignore the temperature data at flow boundaries where flow is directed into the hot pool, i.e., at the core subassembly outlets unless flow reversal occurs. Similarly, CFD will ignore temperature data at boundaries where the flow is directed out of the hot pool, i.e., at the IHX inlets except under flow reversal. The focus of this work is to ensure that the SAS software patch addresses the undocumented limitation described in prior VTR calculation reports, rather than the accurate assessment of thermal stratification in the VTR during protected transients. This motivates the development of a new, simplified CFD model with a coarser mesh to accelerate the testing process. The updated model, and simplifying assumptions, are documented in this report. In future work, the thermal stratification assessment should be performed in more detail. The simplified CFD model can be improved by performing grid convergence studies sensitivity studies of turbulence parameters (e.g., Prandtl number, turbulence production and dissipation parameters) on temperature distributions and thermal stratification.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗