Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “relaxation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Ion-pairing dynamics of Li{sup +} and SCN{sup -} in dimethylformamide solution: Chemical exchange two-dimensional infrared spectroscopy

Ultrafast two-dimensional infrared (2DIR) spectroscopy has been proven to be an exceptionally useful method to study chemical exchange processes between different vibrational chromophores under thermal equilibria. Here, we present experimental results on the thermal equilibrium ion pairing dynamics of Li{sup +} and SCN{sup -} ions in N,N-dimethylformamide. Li{sup +} and SCN{sup -} ions can form a contact ion pair (CIP). Varying the relative concentration of Li{sup +} in solution, we could control the equilibrium CIP and free SCN{sup -} concentrations. Since the CN stretch frequency of Li-SCN CIP is blue-shifted by about 16 cm{sup -1} from that of free SCN{sup -} ion, the CN stretch IR spectrum is a doublet. The temperature-dependent IR absorption spectra reveal that the CIP formation is an endothermic (0.57 kJ/mol) process and the CIP state has larger entropy by 3.12 J/(K mol) than the free ion states. Since the two ionic configurations are spectrally distinguishable, this salt solution is ideally suited for nonlinear IR spectroscopic investigations to study ion pair association and dissociation dynamics. Using polarization-controlled IR pump-probe methods, we first measured the lifetimes and orientational relaxation times of these two forms of ionic configurations. The vibrational population relaxation times of both the free ion and CIP are about 32 ps. However, the orientational relaxation time of the CIP, which is {approx}47 ps, is significantly longer than that of the free SCN{sup -}, which is {approx}7.7 ps. This clearly indicates that the effective moment of inertia of the CIP is much larger than that of the free SCN{sup -}. Then, using chemical exchange 2DIR spectroscopy and analyzing the diagonal peak and cross-peak amplitude changes with increasing the waiting time, we determined the contact ion pair association and dissociation time constants that are found to be 165 and 190 ps, respectively. The results presented and discussed in this paper are believed to be important, not only because the ion-pairing dynamics is one of the most fundamental physical chemistry problems but also because such molecular ion-ion interactions are of critical importance in understanding Hofmeister effects on protein stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Loss tangent imaging: Theory and simulations of repulsive-mode tapping atomic force microscopy

An expression for loss tangent measurement of a surface in amplitude modulation atomic force microscopy is derived using only the cantilever phase and the normalized cantilever amplitude. This provides a direct measurement of substrate compositional information that only requires tuning of the cantilever resonance to provide quantitative information. Furthermore, the loss tangent expression incorporates both the lost and stored energy into one term that represents a fundamental interpretation of the phase signal in amplitude modulation imaging. Numerical solutions of a cantilever tip interacting with a simple Voigt modeled surface agree with the derived loss tangent to within a few percent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density and temperature scaling of disorder-induced heating in ultracold plasmas

We report measurements and simulations of disorder-induced heating in ultracold neutral plasmas. Fluorescence from plasma ions is excited using a detuned probe laser beam while the plasma relaxes from its initially disordered nonequilibrium state. This method probes the wings of the ion velocity distribution. The simulations yield information on time-evolving plasma parameters that are difficult to measure directly and make it possible to connect the fluorescence signal to the rms velocity distribution. The disorder-induced heating signal can be used to estimate the electron and ion temperatures {approx}100 ns after the plasma is created. This is particularly interesting for plasmas in which the electron and ion temperatures are not known.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radiative capture rates at deep defects from electronic structure calculations

We present a methodology to calculate radiative carrier capture coefficients at deep defects in semiconductors and insulators from first principles. Electronic structure and lattice relaxations are accurately described with hybrid density functional theory. Calculations of capture coefficients provide an additional validation of the accuracy of these functionals in dealing with localized defect states. We also discuss the validity of the Condon approximation, showing that even in the event of large lattice relaxations the approximation is accurate. We test the method on GaAs:VGa-TeAs and GaN:CN, for which reliable experiments are available, and demonstrate very good agreement with measured capture coefficients.

36 MATERIALS SCIENCE↗

Suppressing the spin relaxation of electrons in silicon

Uniaxial compressive strain along the [001] direction strongly suppresses the spin relaxation in silicon. When the strain level is large enough so that electrons are redistributed only in the two valleys along the strain axis, the dominant scattering mechanisms are quenched and electrons mainly experience intra-axis scattering processes (intravalley or intervalley scattering within valleys on the same crystal axis). In this work, we first derive the spin-flip matrix elements due to intra-axis electron scattering off impurities, and then provide a comprehensive model of the spin relaxation time due to all possible interactions of conduction-band electrons with impurities and phonons. We predict a nearly three orders of magnitude improvement in the spin relaxation time of ~10 19 cm -3 antimony-doped silicon (Si:Sb) at low temperatures.

36 MATERIALS SCIENCE↗

Anisotropy of the solid-state epitaxy of silicon carbide in silicon

A new method for the solid-state synthesis of epitaxial layers is developed, in which a substrate participates in the chemical reaction and the reaction product grows not on the substrate surface, as in traditional epitaxial methods, but inside the substrate. This method offers new opportunities for elastic-energy relaxation due to a mechanism operating only in anisotropic media, specifically, the attraction of point defects formed during the chemical reaction. The attracting point centers of dilatation form relatively stable objects, dilatation dipoles, which significantly reduce the total elastic energy. It is shown that, in crystals with cubic symmetry, the most favorable arrangement of dipoles is the 〈111〉 direction. The theory is tested by growing silicon carbide (SiC) films on Si (111) substrates by chemical reaction with carbon monoxide CO. High-quality single-crystal SiC-4H films with thicknesses of up to 100 nm are grown on Si (111). Ellipsometric analysis showed that the optical constants of the SiC-4H films are significantly anisotropic. This is caused not only by the lattice hexagonality but also by a small amount (about 2–6%) of carbon atoms remaining in the film due to dilatation dipoles. It is shown that the optical constants of the carbon impurity correspond to strongly anisotropic highly oriented pyrolytic graphite.

36 MATERIALS SCIENCE↗

Scalable Asynchronous Domain Decomposition Solvers

We discuss how parallel implementations of linear iterative solvers generally alternate between phases of data exchange and phases of local computation. Increasingly large problem sizes and more heterogeneous compute architectures make load balancing and the design of low latency network interconnects that are able to satisfy the communication requirements of linear solvers very challenging tasks. In particular, global communication patterns such as inner products become increasingly limiting at scale. We explore the use of asynchronous communication based on one-sided Message Passing Interface primitives in the context of domain decomposition solvers. In particular, a scalable asynchronous two-level Schwarz method is presented. We discuss practical issues encountered in the development of a scalable solver and show experimental results obtained on a state-of-the-art supercomputer system that illustrate the benefits of asynchronous solvers in load balanced as well as load imbalanced scenarios. Using the novel method, we can observe speedups of up to four times over its classical synchronous equivalent.

97 MATHEMATICS AND COMPUTING↗

Electron Coherence in Mesoscopic Structures

The recent rapid progress in nanofabrication and experimental techniques made it possible to investigate a variety of meso-- and nano--scale systems, which were unavailable only a few years ago. Examples include fabrication of high-quality quantum wires in semiconductor heterostructures, of nanoscale hybrid superconductor--normal metal structures, and of a variety of novel (and much smaller) quantum dot and q-bit designs. These technological advances have led to formulation of a number of condensed matter theory problems which are equally important for applications and for the fundamental science. The present proposal aims at filling the exposed gaps in knowledge and at facilitating further development of experimental and theoretical physics of nanoscale structures. Specifically, the two PIs address the following issues: (i) The theory of interacting electrons in a quantum wire which accounts adequately for the non-linear dispersion relation of the electrons. The existing approaches rely on models with {\em linearized} electron spectrum, which fall short of addressing a growing list of experimentally relevant phenomena. (ii) Dynamics of hybrid normal--superconducting systems. A reliable treatment of dissipative phenomena in such structures is not developed as of yet, while rapid progress in fabrication makes finding the proper theoretical treatment methods highly desirable. (iii)~The fundamental limits on relaxation times of a superconducting charge q-bit. The latter is one of the most advanced scalable realizations of a quantum computing device. (iv)~The dynamics and relaxation times of a spin of an electron in a small semiconductor quantum dot. Besides the fundamental importance, these structures are also valuable candidates for quantum computing applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of soft rubber goods

The performance of rubber goods suitable for use as O-rings, seals, gaskets, bladders and diaphragms under conditions simulating those of the space shuttle were studied. High reliability throughout the 100 flight missions planned for the space shuttle was considered of overriding importance. Accordingly, in addition to a rank ordering of the selected candidate materials based on prolonged fluid compatibility and sealability behavior, basic rheological parameters (such as cyclic hysteresis, stress relaxation, indicated modulus, etc.) were determined to develop methods capable of predicting the cumulative effect of these multiple reuse cycles.

Merz, P. L.↗

Solutions to divergence form equations using the method of partial implicitization

Partial implicitization is well suited for use on vector-processing computers since the method is an explicit unconditionally stable numerical technique. So far equations cast in nondivergence form have been used, though equations cast in the divergence form would have inherently greater accuracy. Since the method of partial implicitization is applicable only to relaxing problems to their steady state and is not applicable to true transient problems, a simple mathematical manipulation can be carried out which will produce the desired partial implicitization solution to divergence form equations.

Graves, R. A., Jr.↗

Aeroassisted-vehicle design studies for a manned Mars mission

An aerobrake design that has matured over several years of development accounting for all of the important flow phenomenology which are characteristic of aerobraking vehicles is proposed as the mission baseline. Flight regimes and aerothermal environments for both Mars and Earth entry are calculated using advanced methods to account for real-gas, thermochemical, relaxation effects. The results are correlated with thermal-protection and structural requirements and mission performance capability. The importance of nonequilibrium radiative heating for Earth aerocapture is demonstrated. It is suggested that two aerobrakes of different sizes will produce optimal performance for the three phases of the mission (i.e., one aerobrake for Mars aerocapture and descent of the surface lander and another for Earth return).

Menees, Gene P.↗

Aeroassisted-vehicle design studies for a manned Mars mission

An aerobrake design accounting for all of the important flow phenomenology which are characteristic of aerobraking vehicles is proposed as the mission baseline. Flight regimes and aerothermal environments for both Mars and earth entry are calculated using advanced methods to account for real-gas, thermochemical, relaxation effects. The results are correlated with thermal-protection and structural requirements and mission performance capability. The importance of nonequilibrium radiative heating for earth aerocapture is demonstrated. It is suggested that two aerobrakes of different sizes will produce optimal performance for the three phases of the mission (i.e., one aerobrake for Mars aerocapture and descent of the surface lander and another for earth return).

Menees, Gene P.↗

On the suitability of the connection machine for direct particle simulation

The algorithmic structure was examined of the vectorizable Stanford particle simulation (SPS) method and the structure is reformulated in data parallel form. Some of the SPS algorithms can be directly translated to data parallel, but several of the vectorizable algorithms have no direct data parallel equivalent. This requires the development of new, strictly data parallel algorithms. In particular, a new sorting algorithm is developed to identify collision candidates in the simulation and a master/slave algorithm is developed to minimize communication cost in large table look up. Validation of the method is undertaken through test calculations for thermal relaxation of a gas, shock wave profiles, and shock reflection from a stationary wall. A qualitative measure is provided of the performance of the Connection Machine for direct particle simulation. The massively parallel architecture of the Connection Machine is found quite suitable for this type of calculation. However, there are difficulties in taking full advantage of this architecture because of lack of a broad based tradition of data parallel programming. An important outcome of this work has been new data parallel algorithms specifically of use for direct particle simulation but which also expand the data parallel diction.

Dagum, Leonard↗

Electrostatic propulsion using C60 molecules

An evaluation is made of the potential benefits of C60 molecules as a basis for ion propulsion. Because C60 is storable, its use may result in a larger usable propellant fraction than previous methods of cluster ion propulsion. C60 may also relax such engineering constraints as grid spacing, which restrict the performance of noble gas ion propulsion. The behavior of C60 in a plasma discharge environment, as well as various electron impact cross sections of the molecule, will greatly afftect the feasibility of the concept.

Leifer, Stephanie D.↗

Stability of polarized states for diamond valleytronics

The stability of valley polarized electron states is crucial for the development of valleytronics. A long relaxation time of the valley polarization is required to enable operations to be performed on the polarized states. Here, we investigate the stability of valley polarized states in diamond, expressed as relaxation time. We have found that the stability of the states can be extremely long when we consider the electron-phonon scattering processes allowed by symmetry considerations. We determine electron-phonon coupling constants by Time-of-Flight measurements and Monte Carlo simulations and use these data to map out the relaxation time temperature dependency. The relaxation time for diamond can be microseconds or longer below 100 K and 100 V/cm due to the strong covalent bond, which is highly encouraging for future use in valleytronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluctuating Hydrodynamic Methods for Fluid-Structure Interactions in Confined Channel Geometries

Computational methods are developed for the study of fluid-structure interactions subject to thermal fluctuations when conned within channels having slit-like geometry. The methods take into account the hydrodynamic coupling and diusivity of microstructures when influenced by their proximity to no-slip walls. We develop stochastic numerical methods subject to no-slip boundary conditions using a staggered nite volume discretization. We show that by imposing an exact fluctuation-dissipation condition to discretize the stochastic driving elds combined with using an exact projection method to enforce incompressibility is sucient to ensure results consistent with statistical mechanics. We demonstrate our methods by investigating how the proximity of ellipsoidal colloids to the channel wall eects their active hydrodynamic responses and passive diusivity. We also study the collective dynamics of a large number of particles by considering the intermediate scattering functions for the relaxation of density fluctuations. We expect our introduced stochastic computational methods to be applicable broadly to applications in which confinement effects play an important role in the dynamics of microstructures subject to hydrodynamic coupling and thermal fluctuations. uctuations.

Wang, Yaohong↗

Phase retrieval by coherent modulation imaging

Phase retrieval is a long-standing problem in imaging when only the intensity of the wavefield can be recorded. Coherent diffraction imaging (CDI) is a lensless technique that uses iterative algorithms to recover amplitude and phase contrast images from diffraction intensity data. For general samples, phase retrieval from a single diffraction pattern has been an algorithmic and experimental challenge. Here we report a method of phase retrieval that uses a known modulation of the sample exit-wave. This coherent modulation imaging (CMI) method removes inherent ambiguities of CDI and uses a reliable, rapidly converging iterative algorithm involving three planes. It works for extended samples, does not require tight support for convergence, and relaxes dynamic range requirements on the detector. CMI provides a robust method for imaging in materials and biological science, while its single-shot capability will benefit the investigation of dynamical processes with pulsed sources, such as X-ray free electron laser.

36 MATERIALS SCIENCE↗