Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “predictive control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Simplified interplanetary guidance procedures using onboard optical measurements

Simplified guidance procedures have been developed which are based on preflight determination of the characteristics of perturbed trajectories. The results are devoted primarily to planetary approach guidance; however, some considerations for midcourse guidance are included. The methods are studied for an Earth-to-Mars trajectory but would be applicable to Grand Tour and other types of missions. Generally requiring only a single onboard optical angular measurement, the approach procedure predicts guidance corrections for the control of periapsis radius as well as orbital plane orientation. An error analysis has shown that the periapsis radius at Mars can be controlled to a 1 sigma accuracy of about 20 km if the guidance is performed 1/2 day before periapsis passage. If the guidance is performed at the Martian sphere of influence (2.2 days before periapsis), the error doubles because of the increased effect of measurement and maneuvering errors.

Hamer, H. A.↗
NASA NTRS1972

Manual control models of industrial management

The industrial engineer is often required to design and implement control systems and organization for manufacturing and service facilities, to optimize quality, delivery, and yield, and minimize cost. Despite progress in computer science most such systems still employ human operators and managers as real-time control elements. Manual control theory should therefore be applicable to at least some aspects of industrial system design and operations. Formulation of adequate model structures is an essential prerequisite to progress in this area; since real-world production systems invariably include multilevel and multiloop control, and are implemented by timeshared human effort. A modular structure incorporating certain new types of functional element, has been developed. This forms the basis for analysis of an industrial process operation. In this case it appears that managerial controllers operate in a discrete predictive mode based on fast time modelling, with sampling interval related to plant dynamics. Successive aggregation causes reduced response bandwidth and hence increased sampling interval as a function of level.

Crossman, E. R. F. W.↗
NASA NTRS1975

Low-cost solar tracking system

Smaller heat-collector is moved to stay in focus with the sun, instead of moving reflector. Tracking can be controlled by storing data of predicted solar positions or by applying conventional sun-sensing devices to follow solar movement.

Miller, C. G.↗
NASA NTRS1976

Atmospheric cloud physics laboratory project study

Engineering studies were performed for the Zero-G Cloud Physics Experiment liquid cooling and air pressure control systems. A total of four concepts for the liquid cooling system was evaluated, two of which were found to closely approach the systems requirements. Thermal insulation requirements, system hardware, and control sensor locations were established. The reservoir sizes and initial temperatures were defined as well as system power requirements. In the study of the pressure control system, fluid analyses by the Atmospheric Cloud Physics Laboratory were performed to determine flow characteristics of various orifice sizes, vacuum pump adequacy, and control systems performance. System parameters predicted in these analyses as a function of time include the following for various orifice sizes: (1) chamber and vacuum pump mass flow rates, (2) the number of valve openings or closures, (3) the maximum cloud chamber pressure deviation from the allowable, and (4) cloud chamber and accumulator pressure.

Schultz, W. E.↗
NASA NTRS1976

Digital adaptive control laws for the F-8

NASA is conducting a flight control research program in digital fly-by-wire technology using a modified F-8C aircraft. The first phase of this program used Apollo hardware to demonstrate the practicality of digital fly-by-wire in an actual test vehicle. For the second phase, conventional aircraft sensors and a large floating point digital computer are being utilized to test advanced control laws and redundancy concepts. As part of NASA's research in digital fly-by-wire technology, Honeywell developed digital adaptive flight control laws for flight test in the F-8C. Adaptation of the control laws was to be based on information sensed from conventional aircraft sensors excluding air data. The control laws were constrained to use only existing elevator, rudder, and ailerons as control effectors, each powered by existing actuators. Three adaptive control laws were successfully designed using maximum likelihood estimation, a Liapunov stable model tracker and a self-excited limit cycle concept. The maximum likelihood estimation design was selected as the most promising because of its capability to identify more than surface effectiveness parameters. The adaptive concepts, the control laws and comparisons of predicted performance are described.

Hartmann, G. L.↗
NASA NTRS1975

NASA Office of Aeronautical and Space Technology Summer Workshop. Volume 6: Structures and dynamics panel

Structural requirements for future space missions were defined in relation to technology needs and payloads. Specific areas examined include: large area space structures (antennas, solar array structures, and platforms); a long, slender structure or boom used to support large objects from the shuttle or hold two bodies apart in space; and advanced composite structures for cost effective weight reductions. Other topics discussed include: minimum gage concepts, high temperature components, load and response determination and control, and reliability and life prediction.

Source record↗
NASA NTRS1981

Trends in liability affecting technical writers

Liability of technical writers for defective products is explored. Documents generated during a product's life cycle (including design memos, design tests, clinical trials, trial use reports, letters, and proposals) become relevant because they are likely to become the only available means of showing that the product was not defectively designed. These documents become the evidence that the product underwent balanced and well considered planning, development, testing, quality control, and field testing. The predicted increased involvement of technical writers in the prevention and defense of product liability claims is cited in view of a greater number of cases turning on "failure to warn".

Driskill, L. P.↗
NASA NTRS1982

Telecommunications systems design

The general configuration of deep space telecommunication systems is reviewed with regard to the design criteria necessary to insure the integrity of the system's telemetry, command, and tracking functions. The signal to noise spectral density ratios that characterize telecommunications performance are defined in terms of the link parameters. For design control, a statistical approach to predict link performance and to assess its uncertainty is described.

Yuen, J. H.↗
NASA NTRS1982

Ground based studies for the space processing of lead-tin-telluride

This paper summarizes the results of a series of studies dealing with crystal growth from the melt and in particular, the growth of the narrow bandgap semiconductor PbSnTe by the Bridgman technique. Theoretical calculations have shown that for low Prandtl number fluids such as semiconductors, convection has no effect on the temperature field in the melt but has a significant effect on the compositional field. They also show that convective flow will exist in a Bridgman growth system on earth, even in the 'thermally stable' configuration. Measurements of the specific heat have been made up to temperatures of 722 C. The thermal diffusivity has been measured up to 1010 C which includes values for the melt. The interdiffusion coefficients for PbTe and SnTe in the melt have been determined. A technique has been developed and tested which provides a vacuum tight quartz ampoule with electrical feedthroughs for interface demarcation studies during the Bridgman growth. Analysis of crystals grown has indicated that the PbSnTe system is solutally unstable and the distribution of SnTe in the crystal, after an anomalous first to freeze region, follows that predicted by Pfann for convection controlled growth. Studies of the amount of supercooling in PbSnTe indicate that this may explain an anomalous composition distribution in the first to freeze region of an unseeded growth.

Crouch, R. K.↗
NASA NTRS1984

Performance evaluation of the atmospheric phase of aeromaneuvering orbital transfer vehicles

Studies are underway to design reusable orbital transfer vehicles that would be used to transfer payloads from low-earth orbit to higher orbits and return. One promising concept is to use an atmospheric pass on the return leg to reduce the amount of fuel for the mission. This paper discusses a six-degree-of-freedom simulation analysis for two configurations, a low-lift-to-drag ratio configuration and a medium-lift-to-drag ratio configuration using both a predictive guidance technique and an adaptive guidance technique. Both guidance schemes were evaluated using the 1962 standard atmosphere and three atmospheres that had been derived from three entries of the Space Shuttle. The predictive technique requires less reaction control system activity for both configurations, but because of the limited number of updates and because each update used the 1962 standard atmosphere, the adaptive technique produces more accurate exit conditions.

Powell, R. W.↗
NASA NTRS1984

Visual Attention to Radar Displays

A model is described which predicts the allocation of attention to the features of a radar display. It uses the growth of uncertainty and the probability of near collision to call the eye to a feature of the display. The main source of uncertainty is forgetting following a fixation, which is modelled as a two dimensional diffusion process. The model was used to predict information overload in intercept controllers, and preliminary validation obtained by recording eye movements of intercept controllers in simulated and live (practice) interception.

Moray, N.↗
NASA NTRS1986

Structural dynamics research in a full-scale transport aircraft crash test

A remotely piloted air-to-ground crash test of a full-scale transport aircraft was conducted for the first time for two purposes: (1) to demonstrate performance of an antimisting fuel additive in suppressing fire in a crash environment, and (2) to obtain structural dynamics data under crash conditions for comparison with analytical predictions. The test, called the Controlled Impact Demonstration (CID), was sponsored by FAA and NASA with cooperation of industry, the Department of Defense, and the British and French governments. The test aircraft was a Boeing 720 jet transport. The aircraft impacted a dry lakebed at Edwards Air Force Base, CA. The purpose of this paper is to discuss the structural aspects of the CID. The fuselage section tests and the CID itself are described. Structural response data from these tests are presented and discussed. Nonlinear analytical modeling efforts are described, and comparisons between analytical results and experimental results are presented.

Mccomb, H. G., Jr.↗
NASA NTRS1987

Assessing the Reliability of NDE

Versatile FORTRAN computer algorithm developed for calculating and plotting reliability of nondestructive evaluation (NDE) technique for inspection of flaws. Developed specifically to determine reliability of radiographic and ultrasonic methods for detection of critical flaws in structural ceramic materials. Reliability displayed in form of plot of probability of detection versus flaw size. NDE methods used in such applications as diagnostic medicine, quality control in industrial production, and prediction of failure in structural components.

Roth, Don J.↗
NASA NTRS1987

Upper and Middle Atmospheric Density Modeling Requirements for Spacecraft Design and Operations

Presented and discussed are concerns with applications of neutral atmospheric density models to space vehicle engineering design and operational problems. The area of concern which the atmospheric model developers and the model users considered, involved middle atmosphere (50 to 90 km altitude) and thermospheric (above 90 km) models and their engineering application. Engineering emphasis involved areas such as orbital decay and lifetime prediction along with attitude and control studies for different types of space and reentry vehicles.

Davis, M. H.↗
NASA NTRS1988

Variable response load limiting device

An energy absorbing device used as a load limiting member in a structure to control its response to applied loads is described. It functions by utilizing a spool assembly having flanged ends and an interior cavity of sufficiently large diameter to cause it to deform plastically at a prescribed load. In application, the spool is utilized as a pivot point for the legs of an airplane seat. When properly designed and integrated into the seat arrangement the spool will twist about its axis, deforming plastically when the impact load exceeds the spool yield value. Through this deformation, the spool absorbs the kinetic energy of the movement of the seat at a substantially constant rate, thereby controlling the level of loads transmitted to the seat occupant. By proper sizing and collection of materials, it is possible to control load response in a predictable manner.

Mcsmith, Dwight D.↗
NASA NTRS1988

Ascent Guidance for a Winged Boost Vehicle

The objective of the advanced ascent guidance study was to investigate guidance concepts which could contribute to increased autonomy during ascent operations in a winged boost vehicle such as the proposed Shuttle II. The guidance scheme was required to yield near a full-optimal ascent in the presence of vehicle system and environmental dispersions. The study included consideration of trajectory shaping issues, trajectory design, closed loop and predictive adaptive guidance techniques and control of dynamic pressure by throttling. An extensive ascent vehicle simulation capability was developed for use in the study.

Corvin, Michael Alexander↗
NASA NTRS1990

Recent observations of high voltage spacecraft-environment interaction at LEO altitudes using sounding rockets

The paper addresses the subject of the interaction of positively and negatively charged bodies with the terrestrial ionosphere at low earth orbit altitudes. Data from two recent sounding rocket flights are used to establish that the current collected by exposed conductors biassed positively at up to 45kV relative to the ionospheric plasma generally follow predictions which account for strong control of electron flow by the geomagnetic field. If the biased structure is in the vicinity of disturbing influences such as an emitted charged particle beam, or locally enhanced gas pressure, then large deviations from the space-charge-limited return currents occur.

Raitt, W. J.↗
NASA NTRS1990

Structures technology development for hypersonic vehicles

This paper summarizes some of the efforts to advance hypersonic structures technology through the National Aero-Space Plane (NASP) Structures Technology Maturation Program. The ranges of expected structural loads and results from analysis and test activities are described. Topics briefly covered include shock impingement effects on aerothermal loads, actively-cooled structures concepts and test results to date for leading edges and panels, design and fabrication of a carbon-carbon control surface, a program for predicting performance of metal matrix composites, an analysis and sizing procedure for thermal structures, and some recently-developed test fixtures for seals, thermal insulation, and actively-cooled panels.

Camarda, Charles J.↗