Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “portions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Observation of additional low-degree 5-min modes of solar oscillation

High-order solar oscillations with degrees l=3, 4, and 5 could be detected. The observations were made by measuring the difference between the shifts in the Fe 5,124 spectrum line from light integrated from a central circular portion of the solar disk and from an annular portion exterior to it. The frequencies of the octupole modes agree well with the values obtained from whole-disk measurements at the South Pole. A least-squares fit of the observed frequencies to values interpolated between and extrapolated from the predictions of a sequence of solar models with different chemical compositions selects two models. One, a helium-rich solution, agrees with that of similar analyses of whole-disk data. The extrapolated solution has a relatively deep convection zone, and is thus consistent with analyses of 5-min oscillations of high degree.

Scherrer, P. H.↗
NASA NTRS1982

Glanggang and Selakopi - Two new paired Indonesian chondrites

The Indonesian meteorites Selakopi, and H-5 chondrite, and Glanggang, a breccia with H-6 fragments in an H-5 chondritic matrix, were recovered on the same day from sites only 50 km apart. The textures and compositions of Selakopi and the H-5 portion of Glanggang are very similar, indicating that they are closely related. The bulk chemistry of the H-6 portion of Glanggang is also very similar to that of the samples mentioned. It has therefore been concluded that Selakopi and the Glanggang breccia fragments were derived from the same source area and were probably ejected at the same time. Minor differences in bulk composition and texture among the three samples may be attributed to local variations on the parent body. However, for reasons stipulated in the conclusion, it is recommended that separate names be maintained for these meteorites until further, more definitive investigations have been made.

Fredriksson, K.↗
NASA NTRS1982

On the dust ring current of Saturn's F-ring

The thin F-ring of Saturn, which is well within the corotating portion of the Saturnian magnetosphere, has been shown by Voyager 1 and 2 observations to be largely composed of small dust grains. Mendis et al. (1982) have argued that with plausible values of the ambient plasma density and temperature near the F-ring, these grains will be charged to around -40 volts. Mendis et al. have shown that within the corotating portion of the magnetosphere such negatively charged grains can move in circular orbits in the equatorial plane. In connection with a relative motion between the negatively charged grains and the corotating positive ions, the F-ring constitutes a ring current. The present investigation has the objective to calculate this current and to show that it would significantly alter the magnetospheric dipole field in the vicinity of the ring. A current of approximately 12,0000 A is obtained. The change in the magnetic field produced by the current could be measured by a spacecraft approaching to within 100 km above or below the F-ring plane.

Hill, J. R.↗
NASA NTRS1981

Submarine fresh water outflow detection with a dual-frequency microwave and an infrared radiometer system

Since infrared measurements are only very slightly affected by whitecap and banking angle influences, the combined multifrequency radiometric signatures of the L-band, the S-band, and an infrared radiometer are used in identifying freshwater outflows (submerged and superficial). To separate the river and lagoon outflows from the submarine outflows, geographical maps with a scale of 1:100,000 are used. In all, 44 submarine freshwater springs are identified. This is seen as indicating that the submarine freshwater outflow locations are more numerous around the island than had earlier been estimated. Most of the submarine springs are located at the northwest and southeast portion of the Puerto Rican coastline; the success in detecting the submarine springs during both missions at the northwest portion of the island is 39%. Salinity and temperature distribution plots along the flight path in longitude and latitude coordinates reveal that runoff direction can be determined.

Blume, H.-J. C.↗
NASA NTRS1984

Sialon Electrodes and Insulators for MHD Device

Rectangular magnetohydrodynamic (MHD) channel structure for electrical power generation designed using pure sialon ceramic for insulating portion of structure and metal-bearing sialon cermet for conducting portion.

Phillips, W. M.↗
NASA NTRS1984

Repairing Damaged Power-Cable Insulation

Simple method saves time, money, and material. In new method cable remains in place while new insulation is applied to damaged portion. Method results in new terminations with safety factor equal to that of any portion of cable.

Baker, G. E.↗
NASA NTRS1982

Mount St. Helens plume dispersion based on trajectory analyses

The major eruption of Mount St. Helens on 18 May 1980, had sufficient energy to traverse the troposphere (9 km above the mountain top) and to penetrate an additional 10 km into the stratosphere. This plume, initially quasi-vertical, rapidly acquired the horizontal momentum of the environmental winds and suffered differential rotation due to a positive speed shear in the troposphere and a negative shear in the stratosphere. Advected rapidly eastward by the undulating jet stream, the lower stratospheric portion of the plume circled the globe at an average speed of approx. 25 m s/l, reentering North America over California in early June. During the same period, the uppermost portion slowly looped over the northwestern United States and then moved westward over the northern Pacific Ocean. Thus, plume dispersion was initiated by the vertical shears of the horizontal winds which converted a nearly vertical plume to a thin, quasi-horizontal, quasi-zonal lamina. Horizontal shears then dispersed the lamina meridionally while small-scale, wave turbulent motions spread it slowly vertically.

Danielsen, E. F.↗
NASA NTRS1979

Development of Integrated Programs for Aerospace-vehicle design (IPAD): Integrated information processing requirements

The engineering-specified requirements for integrated information processing by means of the Integrated Programs for Aerospace-Vehicle Design (IPAD) system are presented. A data model is described and is based on the design process of a typical aerospace vehicle. General data management requirements are specified for data storage, retrieval, generation, communication, and maintenance. Information management requirements are specified for a two-component data model. In the general portion, data sets are managed as entities, and in the specific portion, data elements and the relationships between elements are managed by the system, allowing user access to individual elements for the purpose of query. Computer program management requirements are specified for support of a computer program library, control of computer programs, and installation of computer programs into IPAD.

Southall, J. W.↗
NASA NTRS1982

Ampoule sealing apparatus and process

An apparatus and process for sealing fused quartz ampoules housing a semiconductor growth charge under vacuum is described. An elongated fused quartz ampoule having an enlarged diameter open end and a reduced diameter closed end is vertically retained in a vacuum assembly. A semiconductor charge is disposed within the reduced diameter portion of the ampoule. A quartz plug of substantially the same diameter as the reduced diameter portion is suspended within the open and of the ampoule via a rotary vacuum feed. After evacuation of the ampoule a plug is lowered into the reduced diameter area and sealed therein while maintaining the vacuum on the ampoule. The charged ampoule area is then separated from the remaining structure by breaking along the scored line.

Debnam, W. J., Jr.↗
NASA NTRS1981

Extended range X-ray telescope

An X-ray telescope system is described which is comprised of a tubular mount having a collecting region remote from the one axial end. A soft X-ray/XUV subsystem associated with the collecting region directs only relatively soft, near on-axis X-rays/XUV radiation incident on a first portion of the collecting region into a first detector sensitive to relatively soft X-rays/XUV radiation. A hard X-ray subsystem associated with the collecting region directs only relatively hard near on-axis X-rays incident on a second portion of the collecting region into a second detector sensitive to relatively hard X-rays.

Hoover, R. B.↗
NASA NTRS1981

Broadband optical radiation detector

A method and apparatus for detecting optical radiation by optically monitoring temperature changes in a microvolume caused by absorption of the optical radiation to be detected is described. More specifically, a thermal lens forming material is provided which has first and second opposite, substantially parallel surfaces. A reflective coating is formed on the first surface, and a radiation absorbing coating is formed on the reflective coating. Chopped, incoming optical radiation to be detected is directed to irradiate a small portion of the radiation absorbing coating. Heat generated in this small area is conducted to the lens forming material through the reflective coating, thereby raising the temperature of a small portion of the lens forming material and causing a thermal lens to be formed therein.

Gupta, A.↗
NASA NTRS1983

High performance liquid chromatographic hydrocarbon group-type analyses of mid-distillates employing fuel-derived fractions as standards

Two high performance liquid chromatographic (HPLC) methods have been developed for the determination of saturates, olefins and aromatics in petroleum and shale derived mid-distillate fuels. In one method the fuel to be analyzed is reacted with sulfuric acid, to remove a substantial portion of the aromatics, which provides a reacted fuel fraction for use in group type quantitation. The second involves the removal of a substantial portion of the saturates fraction from the HPLC system to permit the determination of olefin concentrations as low as 0.3 volume percent, and to improve the accuracy and precision of olefins determinations. Each method was evaluated using model compound mixtures and real fuel samples.

Seng, G. T.↗
NASA NTRS1982

Acoustic modal analysis of a full-scale annular combustor

An acoustic modal decomposition of the measured pressure field in a full scale annular combustor installed in a ducted test rig is described. The modal analysis, utilizing a least squares optimization routine, is facilitated by the assumption of randomly occurring pressure disturbances which generate equal amplitude clockwise and counter-clockwise pressure waves, and the assumption of statistical independence between modes. These assumptions are fully justified by the measured cross spectral phases between the various measurement points. The resultant modal decomposition indicates that higher order modes compose the dominant portion of the combustor pressure spectrum in the range of frequencies of interest in core noise studies. A second major finding is that, over the frequency range of interest, each individual mode which is present exists in virtual isolation over significant portions of the spectrum. Finally, a comparison between the present results and a limited amount of data obtained in an operating turbofan engine with the same combustor is made. The comparison is sufficiently favorable to warrant the conclusion that the structure of the combustor pressure field is preserved between the component facility and the engine.

Karchmer, A. M.↗
NASA NTRS1983

Passive Orbital Disconnect Strut (PODS 3), structural and thermal test program

A test program is undertaken to verify that the lifetime of a shuttle launchable dewar can be increased by using passive orbital disconnect struts (PODS). A detailed design is performed on the cold end (PODS-III) portion of the strut. Structural analysis of the thin-wall fiberglass tube allows selection of the optimum winding angle and tube dimensions. Structural tests on the thin-wall fiberglass tube measure both the tension and compression modulus at ambient and LN2 temperatures, the radial deflection versus side load, and the ultimate compression strength of the tube at LN2 temperature. The thermal expansion of the fiberglass tube plus Invar is also measured down to 78 K. The axial gap at the wedge portion of the stem is set based on these data. The PODS-III test article parts are fabricated and assembled using a detailed assembly procedure. The thermal conductants in the orbital configuration was measured for body temperatures between 5 and 40 K. This temperature range covers the predicted ground hold and orbit temperatures for vapor-cooled supports. The test results are then compared with heat leak values predicted before the test began. Side load, axial compression load, and tension load tests conclude the test program.

Parmley, R. T.↗
NASA NTRS1980

Curved film cooling admission tube

Effective film cooling to protect a wall surface from a hot fluid which impinges on or flows along the surface is provided. A film of cooling fluid having increased area is provided by changing the direction of a stream of cooling fluid through an angle of from 135 deg. to 165 deg. before injecting it through the wall into the hot flowing gas. The 1, cooling fluid is injected from an orifice through a wall into a hot flowing gas at an angle to form a cooling fluid film. Cooling fluid is supplied to the orifice from a cooling fluid source via a turbulence control passageway having a curved portion between two straight portions. The angle through which the direction of the cooling fluid is turned results in less mixing of the cooling fluid with the hot gas, thereby substantially increasing the length of the film in a downstream direction.

Graham, R. W.↗
NASA NTRS1982

Middle infrared remote sensing for geology

The middle infrared portion of the spectrum available for geologic remote sensing extends from approximately 3 to 25 micrometers. The source of energy is thermal radiation from surface materials and ambient terrestrial temperatures. The spectral range of usefulness is limited by both the amount of energy available and by transmission of energy through the atmosphere. The best atmospheric window lies between about 8 and 14 micrometers. Remote sensing of the Earth in the infrared is just on the threshold of becoming a valuable geologic tool. Topics which need study include: (1) the used and limitations of the 8 to 14 micrometer region for distinguishing between silicates and nonsilicates; (2) theoretical and experimental understanding of laboratory spectra of rocks and minerals and their relationship to remotely sensed emission spectra; and (3) the possible use of the 3 to 5 and 17 to 25 micrometer portions of the spectrum for remote sensing.

Kahle, A. B.↗
NASA NTRS1982

Spatial and spectral resolution necessary for remotely sensed vegetation studies

An outline is presented of the required spatial and spectral resolution needed for accurate vegetation discrimination and mapping studies as well as for determination of state of health (i.e., detection of stress symptoms) of actively growing vegetation. Good success was achieved in vegetation discrimination and mapping of a heterogeneous forest cover in the ridge and valley portion of the Appalachians using multispectral data acquired with a spatial resolution of 15 m (IFOV). A sensor system delivering 10 to 15 m spatial resolution is needed for both vegetation mapping and detection of stress symptoms. Based on the vegetation discrimination and mapping exercises conducted at the Lost River site, accurate products (vegetation maps) are produced using broad-band spectral data ranging from the .500 to 2.500 micron portion of the spectrum. In order of decreasing utility for vegetation discrimination, the four most valuable TM simulator VNIR bands are: 6 (1.55 to 1.75 microns), 3 (0.63 to 0.69 microns), 5 (1.00 to 1.30 microns) and 4 (0.76 to 0.90 microns).

Rock, B. N.↗
NASA NTRS1982

Airborne multispectral linear array instruments at Goddard Space Flight Center

The fabrication of airborne instruments is contributing to the development of multispectral linear array technology at NASA's Goddard Space Flight Center. The linear array pushbroom radiometer (LAPR-I), was built to demonstrate capabilities for acquiring digital image data using linear arrays. The LAPR-I employed three arrays of 512 silicon photodiodes each to simultaneously acquire three channels of data for spectral bands within the visible and near-infrared portions of the spectrum. A second instrument, LAPR-II, uses four arrays each consisting of 512 silicon detectors. A filter wheel containing six spectral filters is used in conjunction with each array to allow filter changes in flight. This capability will facilitate studies into the utility of various bands within the visible and near infrared portions of the spectrum. The LAPR-II's aircraft mounting will allow off-nadir pointing (plus-or-minus 50 deg fore-and-aft and side-to-side) which will enable investigations of the radiometric and geometric effects of off-nadir viewing. A short wave infrared radiometer is also described.

Irons, J. R.↗