Mercury-Pollution Induction of Intracellular Lipid Accumulation and Lysosomal Compartment Amplification in the Benthic Foraminifer Ammonia parkinsoniana
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
The implementation of the US Renewable Fuel Standard is expected to increase the construction and operation of new biofuel facilities. Allowing this industry to grow without adversely affecting air quality is an important sustainability goal sought by multiple stakeholders. However, little is known about how the emission controls potentially required to comply with air quality regulations might impact biorefinery cost and deployment strategies such as siting and sizing. In this study, we use a baseline design for a lignocellulosic hydrocarbon biofuel production process to assess how the integration of emission controls impacts the minimum fuel selling price (MFSP) of the biofuel produced. We evaluate the change in MFSP for two cases as compared to the baseline design by incorporating (i) emission controls that ensure compliance with applicable federal air regulations and (ii) advanced control options that could be used to achieve potential best available control technology (BACT) emission limits. Our results indicate that compliance with federal air regulations can be achieved with minimal impact on biofuel cost (~$0.02 per gasoline gallon equivalent (GGE) higher than the baseline price of $5.10 GGE -1 ). However, if air emissions must be further reduced to meet potential BACT emission limits, the cost could increase nontrivially. For example, the MFSP could increase to $5.50 GGE -1 by adopting advanced emission controls to meet potential boiler BACT limits. Finally, given tradeoffs among emission control costs, permitting requirements, and economies of scale, these results could help inform decisions about biorefinery siting and sizing and mitigate risks associated with air permitting.
Concentrations, sources and risk of 16 priority polycyclic aromatic hydrocarbons (PAHs) were investigated in surface sediments from 19 representative tributaries in a regional scale of Chongqing City. The total concentration of 16 PAHs (ΣPAHs) ranged from 221 to 3205 ng g{sup −1} with a mean of 1055 ng g{sup −1}. Most tributaries of the Jialing River exhibited significantly higher ΣPAHs concentrations (mean 1864 ng g{sup −1}) compared to those flowing into the Yangtze River (mean 787 ng g{sup −1}). Isomeric ratio and hierarchical clustering analysis showed combustion may impact sedimentary PAHs at most center sites of the City, while PAHs at most sites were mixed of petrogenic and pyrogenic sources. Toxicity equivalency concentration for carcinogenic PAH were 2–4 times more than the Dutch limit. More comprehensive assessment of safety is suggested to reduce environmental risk of PAHs in sediments.
To investigate the spatial and historical distributions, and source contributions of polycyclic aromatic hydrocarbon (PAHs) from the middle reach of Huai River, 15 surface sediments and two sediment cores were analyzed. The Σ{sub 16} PAHs levels in surface sediments varied from 533.15 to 1422.83 ng/g dw, and from 413.27 to 43951.56 ng/g dw in individual sediment layer of sediment cores. The temporal trends of PAHs in sediment cores are the good indicators of the anthropogenic emissions over the last 60 years. The stable carbon isotope ratios of PAHs indicate the primary PAHs sources were the combustion of wood and coal during 1950s–1970s, and automobile exhausts and the coal combustion emissions in recent decades.
Not Available
Highlights: • Endocrine disrupting chemicals pose a threat to female fecundity and reproduction. • Examined organochlorines and a marker of ovarian responsivity, FSH:LH ratio. • Increasing concentrations of estrogenic PCBs predict FSH:LH ratio > 2. • PCB congeners related to airborne exposure are associated with FSH:LH ratio > 2. Although several recent studies suggest endocrine disrupting compounds, such as polychlorinated biphenyls (PCBs), dichlorodiphenyldichloroethylene (p,p′, DDE), and hexachlorobenzene (HCB), target different organs and systems in the body, their impact on female reproductive function in humans is not well characterized. We seek to determine the relationship between several known endocrine disrupting compounds and a marker of ovarian responsivity, the FSH:LH ratio (higher ratio indicates less ovarian responsivity). For this analysis, 169 naturally cycling women between 21 and 38 years of age completed interviews and had their blood drawn on day 3 of their menstrual cycle for analyses of toxicants, gonadal sex hormones (E{sub 2} and P{sub 4}), and gonadotropins (FSH and LH). PCB congeners were classified into five groups based on their environmental persistence, distribution in human tissue, and toxicological action, reflecting the structure, mechanism, and known biological activity of individual PCB congeners. For every unit (ppb) increase in the level of the estrogenic PCB group, there was a 5-fold greater risk of a FSH:LH ratio ≥ 2, controlling for individual differences in age, percent body fat, cycle day 3 estradiol levels, parity, alcohol use and cigarette smoking in the past year (exp[ß] = 5; p = ≤0.01). PCB congeners identified as estrogenic were analyzed individually, and, of the 19 potentially estrogenic congeners, five were significantly, and positively related to an increased FSH:LH ratio. Four of these congeners are non-persistent, easily volatilize in the environment, and are easily metabolized, and hence, are indicative of very recent or current exposure. p,p′-DDE and HCB were not associated with FSH:LH ratio. We find a clinical indicator of ovarian responsivity, FSH:LH ratio, is associated with a specific group of estrogenic PCBs. These congeners may become airborne when they volatilize from dredged PCB-contaminated soil or from indoor PCB-containing window caulk and sealants in older buildings leading to inhalation exposure. PCB exposure, particularly to non-persistent, estrogenic congeners, may pose an unrecognized threat to female fecundity within the general population.
No abstract prepared.
Particulate matter (PM) has been recognized as one of the key risk factors of lung cancer. However, spatial and temporal patterns of this association remain unclear. Spatiotemporal analyses incorporate the spatial and temporal structure of the data within random effects models, generating more accurate evaluations of PM-lung cancer associations at a scale that can better inform lung cancer prevention programs.
Highlights: • We studied pulmonary effects of temperature and relative humidity in elderly. • Temperature and relative humidity were associated with decreased FEV1 and FVC. • The lag structure suggested that acute effects may last several days. • Effects of temperature and relative humidity were stronger on FVC than on FEV1. • Effects of temperature and relative humidity were amplified by black carbon exposure. While the effects of weather variability on cardio-respiratory mortality are well described, research examining the effects on morbidity, especially for vulnerable populations, is warranted. We investigated the associations between lung function and outdoor temperature (T in Celsius degrees (°C)) and relative humidity (RH), in a cohort of elderly men, the Normative Aging Study. Our study included 1103 participants whose forced vital capacity (FVC), forced expiratory volume in one second (FEV{sub 1}), and weather exposures were assessed one to five times during the period 1995–2011 (i.e. 3162 observations). Temperature and relative humidity were measured at one location 4 h to 7 days before lung function tests. We used linear mixed-effects models to examine the associations with outdoor T and RH. A 5-degree increase in the 3-day moving average T was associated with a significant 0.7% decrease (95%CI: −1.24, −0.20) in FVC and a 5% increase in the 7-day moving average RH was associated with a significant 0.2% decrease (95%CI: −0.40, −0.02) in FVC and FEV{sub 1}. The associations with T were greater when combined with higher exposures of black carbon with a 1.6% decrease (95%CI −2.2; −0.9) in FVC and a 1% decrease (95%CI −1.7; −0.4) in FEV{sub 1}. The relationships between T and RH and lung function were linear. No synergistic effect of T and RH was found. Heat and lung function are two predictors of mortality. Our findings suggest that increases in temperature and relative humidity are related to decreases in lung function, and such observations might be amplified by high black carbon levels.
Graphical abstract: Ag@Ag{sub x}H{sub 3−x}PW12O40 (Ag@AgHPW) nanoparticles (NPs), a new visible-light driven plasmonic photocatalyst, are prepared by a green photoreduction strategy without the addition of any surfactant, which show a high activity and stability for the degradation of methyl blue (MB) under visible light irradiation. - Highlights: • A new visible-light driven photocatalyst Ag@Ag{sub x}H{sub 3−x}PW{sub 12}O{sub 40} was designed. • The photocatalyst shows a high activity for the degradation of methyl blue. • The high activity can be ascribed to the synergy of photoexcited AgHPW and Ag. - Abstract: Ag@Ag{sub x}H{sub 3−x}PW{sub 12}O{sub 40} (Ag@AgHPW) nanoparticles (NPs), a new visible-light driven plasmonic photocatalyst, are prepared by a green photoreduction strategy without the addition of any surfactant. They show strong absorption in the visible region because of the localized surface plasmon resonance (LSPR) of Ag NPs. This plasmonic photocatalyst shows a high activity and stability for the degradation of methyl blue (MB) under visible light irradiation, which could be attributed to the highly synergy of photoexcited Ag{sub x}H{sub 3−x}PW{sub 12}O{sub 40} (AgHPW) and plasmon-excited Ag NPs and the confinement effects at interfaces between polyoxometalates (POMs) and silver. POM anions have redox ability and high photocatalytic activity, whereas Ag NPs could effectively accelerate the separation of electrons and holes, both of which contribute to their high activity.
Highlights: • TiO{sub 2} was synthesized through simple one-step hydrothermal method. • Photocatalytic activity for degradation of organic dyes and Cr(VI) are investigated. • The synergistic effect is shown in coexistence of MB and Cr(VI). - Abstract: Fe–N–S-tri-doped TiO{sub 2} (FeNS-TiO{sub 2}) was synthesized by a simple one-step hydrothermal method. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of as-synthesized samples were tested by the oxidation of methyl orange (MO), rhodamine B (RhB), methylene blue (MB) and the reduction of aqueous Cr(VI) under visible-light (λ > 420 nm) irradiation, and compared with N-dope P25 (N-P25) and the undoped TiO{sub 2}. Besides, the effects of the coexistence of MO, RhB, and MB on FeNS-TiO{sub 2}-mediated photocatalytic reduction of aqueous Cr(VI) were also studied. The results indicated FeNS-TiO{sub 2} displayed higher visible-light-activated photocatalytic activity than N-P25 and the undoped TiO{sub 2}. Otherwise, FeNS-TiO{sub 2} showed the coexistence of MB enhanced the photocatalytic reduction of Cr(VI), whereas the coexistence of MO and RhB retarded the photocatalytic reduction of Cr(VI) over FeNS-TiO{sub 2}. Moreover, a possible photocatalytic mechanism is discussed.
Highlights: • Novel one pot synthesis of CdS/TiO{sub 2} hetero nanostructures by combustion synthesis. • Excellent visible light photocatalytic activity for H{sub 2} production from water. • Enhanced activity for the removal of Cr(VI) from aqueous streams. - Abstract: To achieve more effective coupling of cadmium sulfide (CdS) to the TiO{sub 2}, single step synthesis of CdS/TiO{sub 2} composites is advantageous. In the present study a novel one pot synthesis of several CdS/TiO{sub 2} hetero-nanostructures was explored through combustion technique. As the process involves the simultaneous nucleation of CdS and TiO{sub 2} it leads to the proper connectivity between the constituent materials. All the catalysts were characterized by using several techniques and the excellent visible light activity of the composites has been asserted by the H{sub 2} production from water containing sacrificial reagents, removal of methylene blue and Cr(VI) from aqueous streams. Therefore the present synthetic strategy which is devoid of using molecular linker at interface is more suitable for solar applications, which require faster rates of electron transfer at the hetero junctions.
Highlights: • TiO{sub 2}/CuO composite incorporated with nanographene platelets (NGP). • Catalytic ability of TiO{sub 2}/CuO/NGP composite for removal of MB investigated. • Better adsorption ability for MB compared to TiO{sub 2}/CuO composite without NGP. • Adsorption ability increases with increasing NGP content up to optimal level. • TiO{sub 2}/CuO/NGP with 10 wt% NGP exhibits best photo- and sonophoto-catalysis. - Abstract: TiO{sub 2}/CuO composites incorporated with different amounts of nanographene platelets (NGP) were synthesized by hydrothermal processing. The TiO{sub 2}/CuO/NGP composite was characterized by X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, dynamical light scattering, Raman spectroscopy, Fourier–transform infrared spectroscopy, ultraviolet (UV)-visible diffuse reflectance spectroscopy, Brunauer—Emmett—Teller (BET) surface area analysis, and electron spin resonance. The catalytic ability of the composite for the removal of methylene blue from an aqueous solution was examined by adsorption, photocatalytic, and sonophotocatalytic experiments. The composite was found to exhibit better adsorption ability for methylene blue compared to the TiO{sub 2}/CuO composite without NGP. The photocatalytic activity of the composite was examined by UV and visible (Vis) light irradiation, while the sonophotocatalytic activity was examined by a combination of UV and Ultrasound (UV + US) and Vis + US. Both examinations showed that the light and ultrasonic responses were enhanced by compositing with NGP.
Highlights: • g-C{sub 3}N{sub 4}/S-ZnO composite was successfully prepared by a facile one-pot method. • SLS acts as a linkage reagent in the synthetic process. • S originated from SLS was doped into ZnO. • Combining g-C{sub 3}N{sub 4} with ZnO cooperatively improves composite photocatalytic performance. • The g-C{sub 3}N{sub 4}/S-ZnO composite shows excellent photocatalytic degradation on phenol. - Abstract: Lignin is one of the most abundant materials in nature, but its highly value-adding utilization is still a challenge. Herein, sodium lignosulfonate (SLS) was adopted to fabricate ZnO centering on the concept of “using lignin valuably”. And the g-C{sub 3}N{sub 4}/S-ZnO (CNSZ) composite was successfully prepared. SLS serves as a linkage reagent, interacting with ZnO on one hand and simultaneously helping urea (processor of g-C{sub 3}N{sub 4}) to be deposited with ZnO. The structure and morphology of CNSZ were fully characterized. It is shown that g-C{sub 3}N{sub 4} co-exists in the composite. Meanwhile, EDS and XPS analyses indicate the presence of S in the composite, which originates from SLS. The composite is found to show good photocatalytic property. Its degradation efficiency on phenol is 8.5 times higher than bare ZnO. Due to its facile synthesis and excellent property, the newly-synthesized CNSZ is anticipated to be promising for water treatment application.
Diesel exhaust particles (DEPs) are a major component of diesel emissions, responsible for a large portion of their toxicity. In this study, we examined the toxic effects of DEPs on endothelial cells and the role of DEP-induced heme oxygenase-1 (HO-1) expression. Human microvascular endothelial cells (HMECs) were treated with an organic extract of DEPs from an automobile engine (A-DEP) or a forklift engine (F-DEP) for 1 and 4 h. ROS generation, cell viability, lactate dehydrogenase leakage, expression of HO-1, inflammatory genes, cell adhesion molecules and unfolded protein respone (UPR) gene were assessed. HO-1 expression and/or activity were inhibited by siRNA or tin protoporphyrin (Sn PPIX) and enhanced by an expression plasmid or cobalt protoporphyrin (CoPPIX). Exposure to 25 μg/ml of A-DEP and F-DEP significantly induced ROS production, cellular toxicity and greater levels of inflammatory and cellular adhesion molecules but to a different degree. Inhibition of HO-1 enzymatic activity with SnPPIX and silencing of the HO-1 gene by siRNA enhanced DEP-induced ROS production, further decreased cell viability and increased expression of inflammatory and cell adhesion molecules. On the other hand, overexpression of the HO-1 gene by a pcDNA 3.1D/V5-HO-1 plasmid significantly mitigated ROS production, increased cell survival and decreased the expression of inflammatory genes. HO-1 expression protected HMECs from DEP-induced prooxidative and proinflammatory effects. Modulation of HO-1 expression could potentially serve as a therapeutic target in an attempt to inhibit the cardiovascular effects of ambient PM. - Highlights: • We examined the role of HO-1 expression on diesel exhaust particle (DEP) in endothelial cells. • DEPs exert cytotoxic and inflammatory effects on human microvascular endothelial cells (HMECs). • DEPs induce HO-1 expression in HMECs. • HO-1 protects against the oxidative stress induced by DEps. • HO-1 attenuates the proinflammatory effects induced by DEPs.
The emerging field of polaritonic chemistry explores the behavior of molecules under strong coupling with cavity modes. Despite recent developments in ab initio polaritonic methods for simulating polaritonic chemistry under electronic strong coupling, their capabilities are limited, especially in cases where the molecule also features strong electronic correlation. To bridge this gap, we have developed a novel method for cavity QED calculations utilizing the Density Matrix Renormalization Group (DMRG) algorithm in conjunction with the Pauli–Fierz Hamiltonian. Our approach is applied to investigate the effect of the cavity on the S0–S1 transition of n-oligoacenes, with n ranging from 2 to 5, encompassing 22 fully correlated π orbitals in the largest pentacene molecule. Our findings indicate that the influence of the cavity intensifies with larger acenes. Additionally, we demonstrate that, unlike the full determinantal representation, DMRG efficiently optimizes and eliminates excess photonic degrees of freedom, resulting in an asymptotically constant computational cost as the photonic basis increases.
No abstract provided.