Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Modulation and synchronization technique for MF-TDMA system

This report addresses modulation and synchronization techniques for a multi-frequency time division multiple access (MF-TDMA) system with onboard baseband processing. The types of synchronization techniques analyzed are asynchronous (conventional) TDMA, preambleless asynchronous TDMA, bit synchronous timing with a preamble, and preambleless bit synchronous timing. Among these alternatives, preambleless bit synchronous timing simplifies onboard multicarrier demultiplexer/demodulator designs (about 2:1 reduction in mass and power), requires smaller onboard buffers (10:1 to approximately 3:1 reduction in size), and provides better frame efficiency as well as lower onboard processing delay. Analysis and computer simulation illustrate that this technique can support a bit rate of up to 10 Mbit/s (or higher) with proper selection of design parameters. High bit rate transmission may require Doppler compensation and multiple phase error measurements. The recommended modulation technique for bit synchronous timing is coherent QPSK with differential encoding for the uplink and coherent QPSK for the downlink.

Faris, Faris↗
NASA NTRS2022

The impacts of immersion ice nucleation parameterizations on Arctic mixed-phase stratiform cloud properties and the Arctic radiation budget in GEOS-5

The influence of four different immersion freezing parameterizations on Arctic clouds and the top-of-the atmosphere (TOA) and surface radiation fluxes is investigated in the fifth version of the National Aeronautics and Space Administration (NASA) Goddard Earth Observing System (GEOS-5) with sea surface temperature, sea ice fraction and aerosol emissions held fixed. The different parameterizations were derived from a variety of sources, including classical nucleation theory, field and laboratory measurements. Despite the large spread in the ice-nucleating particle (INP) concentrations in the parameterizations, the cloud properties and radiative fluxes had a tendency to form two groups, with the lower INP concentration category producing larger water path and low-level cloud fraction during winter and early spring, whereas the opposite occurred during the summer season. The stability of the lower troposphere was found to strongly correlate with low-cloud fraction, and along with the effect of ice nucleation, ice sedimentation and melting rates, appears to explain the spring-to-summer reversal pattern in the relative magnitude of the cloud properties between the two categories of simulations. The strong modulation effect of the liquid phase on immersion freezing led to the successful simulation of the characteristic Arctic cloud structure, with a layer rich in supercooled water near cloud top and ice and snow at lower levels. Comparison with satellite retrievals and in situ data suggest that simulations with low INP concentrations more realistically represent Arctic clouds and radiation.

Arctic↗
NASA NTRSDate not supplied

The CubeSat Communication Platform (CCP) – Mission Overview and ConOps

This paper presents the CubeSat Communications Platform (CCP) mission concept, architecture, and development. The CCP is a CubeSat demonstration mission, being developed at the University of Alaska Fairbanks to improve satellite communication capabilities. The CCP payloads include a Software Defined Radio (SDR) with Variable Coded Modulation (VCM) protocols, and an S-band phased array antenna. The mission will test the performance of the VCM protocols versus conventional fixed modulation and coding schemes, relative to the percentage of the Shannon Channel Capacity that each scheme achieves over entire satellite passes. The mission will also test the performance of the phased array antenna, with regard to beamforming and interrogator scanning accuracy. The CCP Mission is collaborating with NASA's Near Space Network (NSN) to demonstrate DVB-S2 VCM and achievable maximum data rate in NASA S-band 5 MHz channel. NSN currently supports missions that communicate with fixed channel codes, modulations, and symbol rates, resulting in a constant data rate that does not adapt to the dynamic link margin. VCM adapts to the dynamics of the link to increase information throughput by changing modulation and coding when the signal-to-noise ratio (SNR) is high. The CCP will be the first mission to demonstrate VCM with NSN ground stations.

phased antenna array↗
NASA NTRS1995

Direct modulation at L-band using a quadrature modulator with feedback

This paper describes how a high quality modulated signal can be generated directly at the frequency of transmission, using a standard quadrature modulator and other commercially-available, low-cost building blocks. The method uses a feedback technique for automatic correction of carrier leakage, differential gain and phase mismatch errors in the quadrature modulator, and other building blocks, by providing guidance to the digital baseband portion of the modulator. Experimental results are presented for direct modulation at 1.65 GHz.

Datta, Ravi↗
NASA NTRS1980

Array automated assembly task low cost silicon solar array project, phase 2

Analyses of solar cell and module process steps for throughput rate, cost effectiveness, and reproductibility are reported. In addition to the concentration on cell and module processing sequences, an investigation was made into the capability of using microwave energy in the diffusion, sintering, and thick film firing steps of cell processing. Although the entire process sequence was integrated, the steps are treated individually with test and experimental data, conclusions, and recommendations.

Olson, C.↗
NASA NTRS1990

Turbulence modulation effect on evaporating spray characterization

The effects of turbulence modulation on the evaporating spray characteristics of a liquid fuel jet are numerically investigated. Two modulation models are implemented into the k-epsilon two-equation model. The gas phase is solved by a pressure-based method on a Eulerian frame and droplets are solved by a stochastic discrete particle technique based on Lagrangian formulation. The k-epsilon models are used to characterize the time and length scales of the gas phase turbulence for droplet dispersions and droplet/turbulence interactions. The modulation models are found to have significant effects on gas phase dynamics, and are less important for the droplet dynamics. Numerical predictions are compared with the experimental data of Drallemier and Peters (1990).

Shang, H. M.↗
NASA NTRS1989

EX Hydrae in outburst

Photometry and red spectroscopy of the intermediate polar EX Hya in its rare outburst state are presented. Photometry during the declining phase of the July-August 1986 outburst shows the 67-min (spin) modulation to be present with similar characteristics to that in quiescence. In contrast, photometry from near the peak of the 1987 May outburst shows little evidence of the 67-min modulation, while spectroscopy obtained nearly simultaneously is similarly lacking in such evidence, despite its presence in quiescent spectroscopic data. Near the beginning of the May 1987 outburst the H alpha emission line develops a broad, high velocity base component whose velocity is modulated with the orbital cycle. The velocity and phase of the broad base component suggest that it is produced near the magnetosphere of the white dwarf at a point along the projected trajectory of the gas stream from the companion. The feature disappears later in the outburst and is not present during quiescence. It is suggested that the outbursts in EX Hya are caused by an increase in the rate of mass transfer from the companion, and that part of this enhanced mass-transfer stream skims over the top of the accretion disk to strike the magnetosphere directly. The interaction of the stream with the magnetosphere gives rise to the broad-base component observed.

Hellier, C.↗
NASA NTRS1993

Testing self-timed circuits using scan paths

Testing is an essential part of any digital system design and one that can be made much easier if testing is considered during the design process rather than after the system is complete. There are a number of techniques for integrating testability into system design, but many of these traditional testing methods used for synchronous circuits are not directly applicable to non-clocked asynchronous circuits. As a result, many asynchronous circuits do not employ design for testability techniques. A method of using the familiar model of scan paths modified to test self-timed systems are presented. Specifically, circuits designed using a library of self-timed modules to assemble systems with two-phase transition control and bundled data paths are considered. The method involves modifying these self-timed modules such that circuits designed from them have a built-in scan path.

Khoche, Ajay↗
NASA NTRS1965

Voltage variable oscillator has high phase stability

Two or more series RLC circuits are used with a negative feedback amplifier to make a voltage variable oscillator. This combination results in high phase stability and optimum frequency modulation.

Hearn, C. P.↗
NASA NTRS1972

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

Source record↗
NASA NTRS1973

Data-aided carrier tracking loops

The characteristics of a data-aided carrier tracking loop are discussed. The loop signal to noise ratio is improved in a phase-locked loop used for tracking a carrier an angle modulated communications system by a quadrature channel added to the phase locked loop. A d.c. signal derived from the quadrature channel is added to the signal fed back to the voltage controlled oscillator in the otherwise conventional phase-locked loop.

Lindsey, W. C.↗
NASA NTRS1973

Study of information transfer optimization for communication satellites

The results are presented of a study of source coding, modulation/channel coding, and systems techniques for application to teleconferencing over high data rate digital communication satellite links. Simultaneous transmission of video, voice, data, and/or graphics is possible in various teleconferencing modes and one-way, two-way, and broadcast modes are considered. A satellite channel model including filters, limiter, a TWT, detectors, and an optimized equalizer is treated in detail. A complete analysis is presented for one set of system assumptions which exclude nonlinear gain and phase distortion in the TWT. Modulation, demodulation, and channel coding are considered, based on an additive white Gaussian noise channel model which is an idealization of an equalized channel. Source coding with emphasis on video data compression is reviewed, and the experimental facility utilized to test promising techniques is fully described.

Odenwalder, J. P.↗
NASA NTRS1974

Skylab 1 and 2 - Pilots' report

Details of powered flight are considered, giving attention to the lift-off, engine thrust, and separation from the S-1VB stage. The rendezvous checklist was performed on time and exactly prior to the first phasing maneuver. The Command Service Module was finally maneuvered to a position for hard docking. Attention is given to aspects of extravehicular activity during the mission and delays experienced in the separation procedure.

Charles Conrad, Jr.↗
NASA NTRS1981

High-power solid-state microwave transmitter

Transmitter phases outputs from individual amplifier modules then combines them in multielement array feed antenna. Size and power capability of system are variable for radar and small-angle scanning applications.

Boreham, J. D.↗