SEARCH · Engineering Papers

Results for “perturbation analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Application of modern time series analysis to high stability oscillators

Techniques of modern time series analysis useful for investigating the characteristics of high-stability oscillators and identifying systematic perturbations are discussed with reference to an experiment in which the frequencies of superconducting cavity-stabilized oscillators and hydrogen masers were compared. The techniques examined include transformation to stationarity, autocorrelation and cross-correlation, superresolution, and transfer function determination.

Farrell, B. F.↗

NASA NTRS1985

Cardiac reserve during weightlessness simulation and shuttle flight

Bedrest deconditioning is suspected to reduce cardiac function. However, quantitation of subtle decreases in cardiac reserve may be difficult. Normal subjects show considerable variability in heart rate response, reflected by a relatively broadband interbeat interval power spectrum. We hypothesized that the deconditioning effects of bedrest would induce narrowing of this spectrum, reflecting a reduction in the autonomically-modulated variability in heart rate. Ten aerobically conditioned men (average 35-50 years) underwent orthostatic tolerance testing with lower body negative pressure pre-bedrest and after 10 days of bedrest, while on placebo and after intravenous atropine. Spectra were derived by Fourier analysis of 128 interbeat interval data sets from subjects with sufficient numbers of beats during matched periods of the protocol. Data suggest that atropine unmasks the deconditioning effect of bedrest in athletic men, evidenced by a reduction in interbeat interval spectral power compared with placebo. Spectral analysis offers a new means of quantitating the effects of bedrest deconditioning and autonomic perturbations on cardiac dynamics.

Goldberger, A. L.↗

NASA NTRS1985

Influence of convection on eutectic microstructure

When the MnBi-Bi eutectic is directionally solidified, it forms fibers of MnBi in a matrix of bismuth. When the material solidified in space at rates of 30 and 50 cm/hr, the average fiber spacing lambda was about one half of the value obtained in cases in which the same material solidified on earth. Neither an altered temperature gradient nor a fluctuating freezing rate are apparently responsible for the change in lambda, and the possibility is studied that natural convection increases lambda on earth by perturbing the compositional field in the melt ahead of the growing solid. A theoretical analysis is conducted along with some experiments. On the basis of the theoretical results for lamellar growth, it is concluded that the spacing lambda increases with increasing stirring, especially at small freezing rates. The experiments indicate that at low growth rates the cross-sectional area of the MnBi blades increases with increased stirring and with decreased growth rate.

Baskaran, V.↗

NASA NTRS1989

Performance optimization for rotors in hover and axial flight

Performance optimization for rotors in hover and axial flight is a topic of continuing importance to rotorcraft designers. The aim of this Phase 1 effort has been to demonstrate that a linear optimization algorithm could be coupled to an existing influence coefficient hover performance code. This code, dubbed EHPIC (Evaluation of Hover Performance using Influence Coefficients), uses a quasi-linear wake relaxation to solve for the rotor performance. The coupling was accomplished by expanding of the matrix of linearized influence coefficients in EHPIC to accommodate design variables and deriving new coefficients for linearized equations governing perturbations in power and thrust. These coefficients formed the input to a linear optimization analysis, which used the flow tangency conditions on the blade and in the wake to impose equality constraints on the expanded system of equations; user-specified inequality contraints were also employed to bound the changes in the design. It was found that this locally linearized analysis could be invoked to predict a design change that would produce a reduction in the power required by the rotor at constant thrust. Thus, an efficient search for improved versions of the baseline design can be carried out while retaining the accuracy inherent in a free wake/lifting surface performance analysis.

Quackenbush, T. R.↗

NASA NTRS1989

Iterative methods for design sensitivity analysis

A numerical method is presented for design sensitivity analysis, using an iterative-method reanalysis of the structure generated by a small perturbation in the design variable; a forward-difference scheme is then employed to obtain the approximate sensitivity. Algorithms are developed for displacement and stress sensitivity, as well as for eignevalues and eigenvector sensitivity, and the iterative schemes are modified so that the coefficient matrices are constant and therefore decomposed only once.

Belegundu, A. D.↗

NASA NTRS1989

Blade surface pressure measurement on a pusher propeller in flight

Unsteady aerodynamics of a pusher propeller operating in the wake of a pylon is investigated through analysis of flight test data. Twenty-two surface-mounted miniature pressure transducers were installed at the 75 and 90 percent radius locations on a propeller blade on a test-bed aircraft. Twenty-six different flight conditions were flown to cover the range of speeds, rpm, altitudes, and flap positions encountered by an advanced turboprop general aviation aircraft. Preliminary analysis of the flight test data indicate a strong three-dimensionality to the perturbed flow at the 75 and 90 percent radii due to pylon wake encounter. Time-history of the pressure transducer waveforms recorded for 700 revolutions exhibit a one-per-cycle wave oscillation on the wake signature. No explanation is found for this behavior yet.

Farokhi, S.↗

NASA NTRS1991

Turbulization of shear flows in astrophysics

The problem of instability in shear flows is treated in a number of works which present a global analysis of irrotational (potential) modes in a 2-D compressible shear flow, implying that, in the presence of reflecting boundaries, those modes can increase and that the characteristic time of the increase is several orders as high as the dynamic time in the medium. Due to the slowness of the increase of irrotational modes and to the problematic character of the theory's applicability for thin accretion disks, an attempt was made to develop an alternative theory of turbulization shear flows. It is quite contrary to the above theory. Instead of the global analysis, a local one is made far from the flow boundaries. Instead of irrotational perturbations, vortical ones are examined. Lastly, the medium is considered to be incompressible. The flow in the accretion disk can be modeled by a plane Couette flow, without regard for boundary conditions: it can be modeled by a plane shear flow in infinite incompressible fluid. According to this scenario, there is a critical perturbation level in the free shear flow. If the level of initial perturbations exceeds the critical one, the flow is turbulized.

Chagelishvili, G. D.↗

NASA NTRS1992

Secondary instability in three-dimensional magnetic reconnection

We consider the transition to turbulence in three-dimensional reconnection of a magnetic neutral sheet. We find that the transition can occur via a three-step process. First, the sheet undergoes the usual tearing instability. Second, the tearing mode saturates to form a two-dimensional quasi-steady state. Third, this secondary equilibrium is itself unstable when it is perturbed by three-dimensional disturbances. Most of this paper is devoted to the analysis and simulation of the three-dimensional linear stability properties of the two-dimensional saturated tearing layer. The numerical simulations are performed with a semi-implicit, pseudospectral-Fourier collocation algorithm. We identify a three-dimensional secondary linear stability which grows on the ideal timescale. An examination of the modal energetics reveals that the largest energy transfer is from the mean field to the three-dimensional field, with the two-dimensional field acting as a catalyst.

Dahlburg, R. B.↗

NASA NTRS1993

Acoustic radiation damping of flat rectangular plates subjected to subsonic flows

The acoustic radiation damping for various isotropic and laminated composite plates and semi-infinite strips subjected to a uniform, subsonic and steady flow has been predicted. The predictions are based on the linear vibration of a flat plate. The fluid loading is characterized as the perturbation pressure derived from the linearized Bernoulli and continuity equations. Parameters varied in the analysis include Mach number, mode number and plate size, aspect ratio and mass. The predictions are compared with existing theoretical results and experimental data. The analytical results show that the fluid loading can significantly affect realistic plate responses. Generally, graphite/epoxy and carbon/carbon plates have higher acoustic radiation damping values than similar aluminum plates, except near plate divergence conditions resulting from aeroelastic instability. Universal curves are presented where the acoustic radiation damping normalized by the mass ratio is a linear function of the reduced frequency. A separate curve is required for each Mach number and plate aspect ratio. In addition, acoustic radiation damping values can be greater than or equal to the structural component of the modal critical damping ratio (assumed as 0.01) for the higher subsonic Mach numbers. New experimental data were acquired for comparison with the analytical results.

Lyle, Karen Heitman↗

NASA NTRS2000

Engine System Loads Development for the Fastrac 60K Flight Engine

Early implementation of structural dynamics finite element analyses for calculation of design loads is considered common design practice for high volume manufacturing industries such as automotive and aeronautical industries. However, with the rarity of rocket engine development programs starts, these tools are relatively new to the design of rocket engines. In the new Fastrac engine program, the focus has been to reduce the cost to weight ratio; current structural dynamics analysis practices were tailored in order to meet both production and structural design goals. Perturbation of rocket engine design parameters resulted in a number of Fastrac load cycles necessary to characterize the impact due to mass and stiffness changes. Evolution of loads and load extraction methodologies, parametric considerations and a discussion of load path sensitivities are discussed.

Frady, Greg↗

NASA NTRS2004

Dynamics of Earth orbiting formations

In this paper the equations of motion of a formation consisting of n spacecraft in Earth orbit are derived via Lagrange's equations. The equations of motion of the formation are developed with respect to both (1) a bound Keplerian reference orbit, and (2) a specific spacecraft in the formation. The major orbital perturbations acting on a formation in low Earth orbit are also included in the analysis. In contrast to the traditional approach based on the balance of linear momentum, the use of Lagrange's equations leads to a high-level matrix derivation of the formation equations of motion. The matrix form of the nonlinear motion equations is then linearized about a bound Keplerian reference orbit. Next, it is demonstrated that under the assumption of a circular reference orbit, the linearized equations of motion reduce to the well-known Hill-Clohessy-Wiltshire equations. The resulting linear and nonlinear dynamic equations lead to maximal physical insight into the structure of formation dynamics, and are ideally suited for use in the design and validation of formation guidance and control laws.

formation flying↗

NASA NTRS2008

Recent Results on the Accurate Measurements of the Dielectric Constant of Seawater at 1.413GHZ

Measurements of the complex. dielectric constant of seawater at 30.00 psu, 35.00 psu and 38.27 psu over the temperature range from 5 C to 3 5 at 1.413 GHz are given and compared with the Klein-Swift results. A resonant cavity technique is used. The calibration constant used in the cavity perturbation formulas is determined experimentally using methanol and ethanediol (ethylene glycol) as reference liquids. Analysis of the data shows that the measurements are accurate to better than 1.0% in almost all cases studied.

Lang, R.H.↗

NASA NTRS2015

The String Stability of a Trajectory-Based Interval Management Algorithm in the Midterm Airspace

NASA's first Air Traffic Management (ATM) Technology Demonstration (ATD-1) was created to facilitate the transition of mature ATM technologies from the laboratory to operational use. The technologies selected for demonstration are the Traffic Management Advisor with Terminal Metering (TMA-TM), which provides precise time-based scheduling in the terminal airspace; Controller Managed Spacing (CMS), which provides terminal controllers with decision support tools enabling precise schedule conformance; and Interval Management (IM), which consists of flight deck automation that enables aircraft to achieve or maintain a precise spacing interval behind a target aircraft. As the percentage of IM equipped aircraft increases, controllers may provide IM clearances to sequences, or strings, of IM-equipped aircraft. It is important for these strings to maintain stable performance. This paper describes an analytic analysis of the string stability of the latest version of NASA's IM algorithm and a fast-time simulation designed to characterize the string performance of the IM algorithm. The analytic analysis showed that the spacing algorithm has stable poles, indicating that a spacing error perturbation will be reduced as a function of string position. The fast-time simulation investigated IM operations at two airports using constraints associated with the midterm airspace, including limited information of the target aircraft's intended speed profile and limited information of the wind forecast on the target aircraft's route. The results of the fast-time simulation demonstrated that the performance of the spacing algorithm is acceptable for strings of moderate length; however, there is some degradation in IM performance as a function of string position.

Swieringa, Kurt A.↗

DOE OSTI2022

G2Aero (Separable shape tensors for aerodynamic design) [SWR-22-44]

G2Aero is a flexible and practical tool for design and deformation of 2D airfoils and 3D blades using data-driven approaches. G2Aero utilizes the geometry of matrix manifolds—specifically the Grassmannian—to build a novel framework for representing physics-based separable deformations of shapes. G2Aero offers the flexibility to generate perturbations in a customizable way over any portion of the blade. The G2Aero framework utilizes data-driven methods based on a curated database of physically relevant airfoils. Specific tools include: - principal geodesic analysis over normal coordinate neighborhoods of matrix manifolds; - a variety of data-regularized deformations to nominal 2D airfoil shapes; - Riemannian interpolation connecting a sequence of airfoil cross-sections to build 3D blades from 2D data; - consistent perturbations over the span of interpolated 3D blades based on dominant modes from the data-driven analysis.

Doronina, Olga↗

DOE OSTI2023

Field-theoretic analysis of hadronization using soft drop jet mass

One of the greatest challenges in quantum chromodynamics is understanding the hadronization mechanism, which is also crucial for carrying out precision physics with jet substructure. In this paper, we bring together recent advancements in our understanding of nonperturbative structure of the soft drop jet mass based on field theory, with precise perturbative calculations at next-to-next-to-leading logarithmic accuracy of its multidifferential variants. This allows for a model-independent analysis of power corrections associated with hadronization in a systematic manner. We test and calibrate hadronization models and their interplay with parton showers by comparing our universality predictions with various event generators for quark and gluon initiated jets in both lepton-lepton and hadron-hadron collisions. Our findings reveal that hadronization models perform better for quark jets relative to gluon jets. Our results provide a valuable toolbox for precision studies with the soft drop jet mass and pave the way for future analyses using real-world collider data. The stringent constraints derived in our framework are useful for improving the modeling of hadronization and its interplay with parton showers in next-generation event generators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Assessing the sensitivity of land-atmosphere coupling strength to boundary and surface layer parameters in the WRF model over Amazon

Modeling tools can be used to diagnose regional land-atmosphere (L-A) coupling strength in the absence of sufficient observations, but subject to uncertainties associated with parameters in model physical parameterizations. Different sensitivity analysis (SA) approaches may lead to different conclusions about the underlying sensitivities. In this study, we quantify simulation uncertainties related to parameter perturbations, and use different approaches to conduct parameter SA on the WRF model pertaining to L-A coupling strength for simulations over the Amazon region. A total of twenty parameters from the Yonsei University (YSU) planetary boundary layer (PBL) and the revised MM5 surface layer (SL) schemes were selected in this analysis. Three different SA methods, the Morris One-at-A-Time (MOAT) method, the Multivariate Adaptive Regression Splines (MARS) method, and the Sobol’ method, were employed to analyze seven WRF-simulated variables and five L-A coupling metrics. Results show that 1) parameter perturbations cause large simulation uncertainties which are comparable to those in the observations; 2) three different SA methods give consistent L-A coupling strength outcomes; 3) six out of the twenty parameters contribute 80%–95% of the total variance in the metrics analyzed, and first-order effects dominate over interaction effects; 4) the twelve variables/metrics of interest show similar sensitivity patterns to the selected parameters, which is consistent across all the methods used. Physical mechanisms for how the sensitive parameters act in determining the L-A coupling strength and associated variables also are illustrated. Our results will help quantifying L-A coupling strength and establishing a basis for parameter calibration over the Amazon region.

Wang, Chen↗

NASA NTRS1971

Inertial navigation systems analysis.

This volume offers the avionic systems engineer a fundamental exposition of the mechanization and error analysis of inertial navigation systems. While the material is applicable to spacecraft and undersea navigation, emphasis is placed upon terrestrial applications on or slightly above the earth's surface. As a result, practical considerations are geared toward those aircraft navigation systems of particular current interest. Extensive use is made of perturbation techniques to develop linearized system equations, whose solutions closely approximate those obtained by nonlinear differential equations. A unified error analysis technique is developed that is applicable to virtually all system configurations. The technique provides a greatly simplified method for comparing the performance of competing system configurations.

Britting, K. R.↗

DOE OSTI2023

Risk Assessment of Industrial Microbes Using a Terrestrial Mesocosm Platform

Abstract Industrial microbes and bio-derived products have emerged as an integral component of the bioeconomy, with an array of agricultural, bioenergy, and biomedical applications. However, the rapid development of microbial biotechnology raises concerns related to environmental escape of laboratory microbes, detection and tracking thereof, and resultant impact upon native ecosystems. Indeed, though wild-type and genetically modified microbes are actively deployed in industrial bioprocesses, an understanding of microbial interactivity and impact upon the environment is severely lacking. In particular, the persistence and sustained ecosystem impact of industrial microbes following laboratory release or unintentional laboratory escape remains largely unexplored. Herein, we investigate the applicability of soil-sorghum mesocosms for the ecological risk assessment of the industrial microbe, Saccharomyces cerevisiae . We developed and applied a suite of diagnostic and bioinformatic analyses, including digital droplet PCR, microscopy, and phylogenomic analyses to assess the impacts of a terrestrial ecosystem perturbation event over a 30-day time course. The platform enables reproducible, high-sensitivity tracking of S. cerevisiae in a complex soil microbiome and analysis of the impact upon abiotic soil characteristics and soil microbiome population dynamics and diversity. The resultant data indicate that even though S. cerevisiae is relatively short-lived in the soil, a single perturbation event can have sustained impact upon mesocosm soil composition and underlying microbial populations in our system, underscoring the necessity for more comprehensive risk assessment and development of mitigation and biocontainment strategies in industrial bioprocesses.

09 BIOMASS FUELS↗