Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

LHC Abort Gap Cleaning Studies During Luminosity Operation

The presence of significant intensities of un-bunched beam is a potentially serious issue in the LHC. Procedures using damper kickers for cleaning both the Abort Gap (AG) and the buckets targeted for injection, are currently in operation at flat bottom. Recent observations of relatively high population of the AG during physics runs brought up the need for AG cleaning during luminosity operation. In this paper the results of experimental studies performed in October 2011 are presented.

43 PARTICLE ACCELERATORS↗

Computational Aspects of Nuclear Coupled-Cluster Theory

We discuss computational aspects of the spherical coupled-cluster method specific to the nuclear many-body problem. Using chiral nucleon-nucleon interaction at next-to-next-to-next-to leading order (N3LO) with cutoff = 500 MeV, we present coupled-cluster results for the ground state of 40Ca. Scaling and performance studies are presented together with challenges we meet with when extending the coupled-cluster effort to nuclei mass hundred and beyond.

Hagen, Gaute↗

RAVEN: a GUI and an Artificial Intelligence Engine in a Dynamic PRA Framework

Increases in computational power and pressure for more accurate simulations and estimations of accident scenario consequences are driving the need for Dynamic Probabilistic Risk Assessment (PRA) [1] of very complex models. While more sophisticated algorithms and computational power address the back end of this challenge, the front end is still handled by engineers that need to extract meaningful information from the large amount of data and build these complex models. Compounding this problem is the difficulty in knowledge transfer and retention, and the increasing speed of software development. The above-described issues would have negatively impacted deployment of the new high fidelity plant simulator RELAP-7 (Reactor Excursion and Leak Analysis Program) at Idaho National Laboratory. Therefore, RAVEN that was initially focused to be the plant controller for RELAP-7 will help mitigate future RELAP-7 software engineering risks. In order to accomplish this task, Reactor Analysis and Virtual Control Environment (RAVEN) has been designed to provide an easy to use Graphical User Interface (GUI) for building plant models and to leverage artificial intelligence algorithms in order to reduce computational time, improve results, and help the user to identify the behavioral pattern of the Nuclear Power Plants (NPPs). In this paper we will present the GUI implementation and its current capability status. We will also introduce the support vector machine algorithms and show our evaluation of their potentiality in increasing the accuracy and reducing the computational costs of PRA analysis. In this evaluation we will refer to preliminary studies performed under the Risk Informed Safety Margins Characterization (RISMC) project of the Light Water Reactors Sustainability (LWRS) campaign [3]. RISMC simulation needs and algorithm testing are currently used as a guidance to prioritize RAVEN developments relevant to PRA.

97 MATHEMATICS AND COMPUTING↗

Design Optimization of Superconducting Parallel-bar Cavities

The parallel-bar structure is a new superconducting geometry [1] whose features and properties may have significant advantages over conventional superconducting deflecting and crabbing cavities for a number of applications. Jefferson Lab is in need for a 499 MHz, 11 GeV rf separator as part of its 12 GeV upgrade program. We report on design optimization studies performed to-date for this and other applications.

43 PARTICLE ACCELERATORS↗

Performance of Replica-Exchange Wang-Landau Sampling for the 2D Ising Model: A Brief Survey

We report a brief performance study of the replica-exchange Wang-Landau algorithm, a recently proposed parallel realization of Wang-Landau sampling, using the 2D Ising model as a test case. The simulation time is found to scale inversely with the square root of the number of subwindows (and thus number of processors) used to span the global parameter space. We also investigate the time profiles for random walkers in dierent subwindows to complete iterations, which will aid the development of and adaptive load-balancing scheme.

Zhao, Yiwei↗

Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications

Air Products is carrying out a scope of work under DOE Award No. DE-FE0012065 “Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications.” The Statement of Project Objectives (SOPO) includes a Task 4f in which a Decision Point shall be reached, necessitating a review of Tasks 2-5 with an emphasis on Task 4f. This Topical Report constitutes the Decision Point Application pertaining to Task 4f. The SOPO under DOE Award No. DE-FE0012065 is aimed at furthering the development of the Ion Transport Membrane (ITM) Oxygen production process toward a demonstration scale facility known as the Oxygen Development Facility (ODF). It is anticipated that the completion of the current SOPO will advance the technology significantly along a pathway towards enabling the design and construction of the ODF. Development progress on several fronts is critical before an ODF project can commence; this Topical Report serves as an early update on the progress in critical development areas. Progress was made under all tasks, including Materials Development, Ceramic Processing Development, Engineering Development, and Performance Testing. Under Task 4f, Air Products carried out a cost and performance study in which several process design and cost parameters were varied and assessed with a process model and budgetary costing exercise. The results show that the major variables include ceramic module reliability, ITM operating temperature, module production yield, and heat addition strategy. High-temperature compact heat exchangers are shown to contribute significant cost benefits, while directly firing into the feed stream to an ITM are even a mild improvement on the high-temperature recuperation approach. Based on the findings to-date, Air Products recommends no changes to the content or emphasis in the current SOPO and recommends its completion prior to another formal assessment of these factors.

Armstrong, Phillip↗

Design and Beam Dynamics Studies of a Multi-Ion Linac Injector for the JLEIC Ion Complex

The electron-ion collider (JLEIC) being proposed at JLab requires a new ion accelerator complex which includes a linac capable of delivering any ion beam from hydrogen to lead to the booster. We are currently developing a linac which consists of several ion sources, a normal conducting (NC) front end, up to 5 MeV/u, and a SC section for energies > 5 MeV/u. This design work is focused on the beam dynamics and electrodynamics studies performed to design efficient and cost-effective accelerating structures for both the NC and SC sections of the linac. Currently, we are considering two separate RFQs for the heavy-ion and light-ion beams including polarized beams, and different types of NC accelerating structures downstream of the RFQ. Quarter-wave and half-wave resonators can be effectively used in the SC section.

Ostroumov, P. N.↗

Static Magnetic Properties of AL800 Garnet Material

A second harmonic tunable RF cavity is being devel-oped for the Fermilab Booster. This device, which prom-ises reduction of the particle beam loss at the injection, transition, and extraction stages, employs perpendicularly biased garnet material for frequency tuning. The required range of the tuning is significantly wider than in previously built and tested tunable RF devices. As a result, the mag-netic field in the garnet comes fairly close to the gyromag-netic resonance line at the lower end of the frequency range. The chosen design concept of a tuner for the cavity cannot ensure uniform magnetic field in the garnet mate-rial; thus, it is important to know the static magnetic prop-erties of the material to avoid significant increase in the lo-cal RF loss power density. This report summarizes studies performed at Fermilab to understand variations in the mag-netic properties of the AL800 garnet material used to build the tuner of the cavity.

43 PARTICLE ACCELERATORS↗

Distribution Feeder Modeling for Time-Series Simulation of Voltage Management Strategies: Preprint

This paper presents techniques to create baseline distribution models using a utility feeder from Hawai'ian Electric Company. It describes the software-to-software conversion, steady-state, and time-series validations of a utility feeder model. It also presents a methodology to add secondary low-voltage circuit models to accurately capture the voltage at the customer meter level. This enables preparing models to perform studies that simulate how customer-sited resources integrate into legacy utility distribution system operations.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Diffusion behaviors between Fe and Pd-containing metallic fuel

Historical interest in metallic fuel, including U-Zr and U-Pu-Zr, is due to the high thermal conductivity, high burnup capability, high fissile atom density, and good compatibility with the coolant in sodium-cooled fast reactor conditions. The notable fuel application issue is the fuel-cladding chemical interaction (FCCI). The major cause of FCCI is the lanthanide fission products that migrate to the fuel periphery and deposit on the fuel cladding. Chemical interactions between the lanthanides and cladding will result in a cladding breach. Thus additives were sought that would immobilize the lanthanides by forming stable additive-lanthanide compounds. Palladium (Pd) is being explored as a potential additive. The microstructure of metallic fuels, including U-Zr and U-Pu-Zr, with Pd addition have been characterized. The post-irradiation examination on the U-13Zr-4Pd wt% alloy has found a pronounced effect of Pd on the fuel-cladding interface. The current study performed preliminary tests of diffusion couple and microstructure analysis, in order to investigate the chemical interactions between cladding and fuel with Pd addition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis of a 750 MHz SRF Dipole Cavity

There is a growing interest in using rf transverse deflecting structures for a plethora of applications in the current and future high performance colliders. In this paper, we present the results of a proof of principle superconducting rf dipole, designed as a prototype for a 750 MHz crabbing corrector for the Medium Energy Electron-Ion Collider (MEIC), which has been successfully tested at 4.2 K and 2 K at the Jefferson Lab’s Vertical Testing Area (VTA). The analysis of its rf performance during cryogenic testing, along with Helium pressure sensitivity, Lorentz detuning, surface resistance, and multipacting processing analysis are presented in this work. Detailed calculations of losses at the port flanges are included for completeness of the cavity’s cryogenic performance studies.

Castilla, Alejandro↗

Using Graph Edit Distance for Noisy Subgraph Matching of Semantic Property Graphs

The subgraph matching problem is a fundamental problem in graph theory that is known to be NP-complete. In this study, performers were asked to develop algorithms to search for semantic property graphs that were subgraphs of a large knowledge graph. The templates provided contained structural information about the subgraphs and some attributes for each node and edge. There also exists a similarity measure between a set of attribute values that occurs on every node and edge. Algorithms performed well in the case where an exact match existed, but performers were also provided templates that had noise added such that there existed no match in the knowledge graph. Performers were asked to find the closest matches to those noisy subgraphs. To evaluate performance on this task, we developed a version of the graph edit distance algorithm to measure the cost of editing the template graph so that it is isomorphic in structure and attributes to the performer submission.

Ebsch, Christopher L.↗

Summarizing experimental sensitivities of collider experiments to dark matter models and comparison to other experiments

Comparisons of the coverage of current and proposed dark matter searches can help us to understand the context in which a discovery of particle dark matter would be made. In some scenarios, a discovery could be reinforced by information from multiple, complementary types of experiments; in others, only one experiment would see a signal, giving only a partial, more ambiguous picture; in still others, no experiment would be sensitive and new approaches would be needed. In this whitepaper, we present an update to a similar study performed for the European Strategy Briefing Book performed within the dark matter at the Energy Frontier (EF10) Snowmass Topical Group We take as a starting point a set of projections for future collider facilities and a method of graphical comparisons routinely performed for LHC DM searches using simplified models recommended by the LHC Dark Matter Working Group and also used for the BSM and dark matter chapters of the European Strategy Briefing Book. These comparisons can also serve as launching point for cross-frontier discussions about dark matter complementarity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High quality superconducting Nb co-planar resonators on sapphire substrate

We present measurements and simulations of superconducting Nb co-planar waveguide resonators on sapphire substrate down to millikelvin temperature range with different readout powers. In the high temperature regime, we demonstrate that the Nb film residual surface resistance is comparable to that observed in the ultra-high quality, bulk Nb 3D superconducting radio frequency cavities while the resonator quality is dominated by the BCS thermally excited quasiparticles. At low temperature both the resonator quality factor and frequency can be well explained using the two-level system models. Through the energy participation ratio simulations, we find that the two-level system loss tangent is $\sim 10^{-2}$, which agrees quite well with similar studies performed on the Nb 3D cavities.

Zhu, S.↗

The Effect of Heat Distribution on the Production of Benzene Using Microwaves

The conversion of methane into aromatics with microwaves has the potential to be developed into a modular process for associated natural gas flaring reduction. Microwaves provide advantages of rapid, selective heating of heterogenous catalyst systems, but the heating is non-homogeneous. This body of work is a study performed by NETL researchers to evaluate the effect of silicon carbide as a microwave susceptor with a benchmark Mo/ZSM-5 catalyst to provide uniform bed heating and improved benzene yields. We demonstrate microwave can provide more efficient benzene production than a conventionally heated system.

Haynes, Daniel↗

The Compton Polarimeter in Hall C of Jefferson

A new Compton polarimeter was installed in Hall C at Jefferson Lab and used during the Qweak experiment which aims to measure the weak charge of proton with a precision of 4.1%. In this polarimeter the electron beam collides with green laser light stored in a low gain Fabry-Perot Cavity; the scattered electrons are detected in 4 planes of a novel diamond micro strip detector while the back scattered photons are detected in a lead tungstate crystal. We extract the beam polarization by fitting the experimental asymmetry for each detector strip to the corresponding asymmetry calculated in QED. During the experiment, we took data to cross-calibrate Moller and Compton polarimeters in Hall C. We will share our preliminary conclusions from this comparison. In this talk, we will also present the results from Monte Carlo studies performed to estimate the systematic uncertainties of the polarization measurement along with comparing results from two independent extraction of the polarization involving very different time scales. The Compton polarimeter has achieved the design goals of 1% statistical uncertainty per hour and we expect to achieve less than 1% systematic uncertainty.

Narayan, Amrendra↗

Reassessment of True Core Collapse Differential Pressure Values for Filter Elements in Safety Critical Environments - 13076

As the areas of application for diverse filter types increases, the mechanics and material sciences associated with the hardware and its relationship with more and more arduous process environments becomes critical to the successful and reliable operation of the filtration equipment. Where the filter is the last safe barrier between the process and the life environment, structural integrity and reliability is paramount in both the validation and the ethical acceptability of the designed equipment. Core collapse is a key factor influencing filter element selection, and is an extremely complex issue with a number of variables and failure mechanisms. It is becoming clear that the theory behind core collapse calculations is not always supported with real tested data. In exploring this issue we have found that the calculation method is not always reflective of the true as tested collapse value, with the calculated values being typically in excess or even an order of magnitude higher than the tested values. The above claim is supported by a case study performed by the author, which disproves most of what was previously understood to be true. This paper also aims to explore the various failure mechanisms of different configurations of filter core, comparing calculated collapse values against real tested values, with a view to understanding a method of calculating their true collapse value. As the technology is advancing, and filter elements are being used in higher temperature, higher pressure, more radioactive and more chemically aggressive environments, confidence in core collapse values and data is crucial. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization of spent filters from the water polishing system of IEA-R1 Reactor - 15451

The aim of this paper is to report studies performed to determine the activity of gamma emitters present in polypropylene cartridge filters from the polishing system of the IEA-R1 Reactor cooling-water primary circuit. The activities were calculated using the dose rates measured with hand-held detectors, after the ratios of the emission rates of photons were evaluated by gamma spectrometry, and the Point Kernel method, which correlates the activity of a source with the dose rates at various distances. The method described can be used to determine routinely the radioactive inventory of these filters, avoiding the necessity of destructive radiochemical analysis, or the necessity of calibrating the geometry of measurement. (authors)

07 ISOTOPE AND RADIATION SOURCES↗