Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “neutral model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Source region of low-speed wind

We have been carrying out the interplanetary scintillation observations at a frequency of 327 MHz. The IPS measurements at this frequency can probe the distance range of 0.1-1 AU. We will report on source regions of the low-speed winds which were observed within 0.3 AU by the IPS method. The source regions of low-speed winds have been studied. In 1991, two spacecraft of Sakigake and IMP observed two low-speed streams in one solar rotation, which originated from a magnetic neutral line on the source surface. However speeds are slightly different from each other: one is 300 km/s while the other one is 400 km/s. Similar speed difference was also observed by the IPS method. We examined differences of these source regions in the soft X-ray images observed by the Yohkoh satellite. At the source region of the lower speed wind, sun spots were found under the neutral line, while nothing except the neutral line was found for the higher speed wind. We made a synoptic chart of the solar wind speeds which were observed within 0.3 AU. In this chart, compact regions of very low speed can be found clearly, and the amplitude of a low-speed belt is smaller than that of a magnetic neutral line. Distribution of the low-speed belt is rather suited above active regions than on a neutral line calculated by the potential field model.

Watanabe, H.↗
NASA NTRS1998

The Unidentified Infrared Emission Bands: Identified

The so-called Unidentified Infrared or simply UIR bands, the infrared emission band spectrum associated with a wide variety of interstellar objects, can be modeled in detail by laboratory spectra of neutral and positively charged polycyclic aromatic hydrocarbon (PAH) mixtures. Fits are presented for the UIR emission from the protoplanetary nebula IRAS 22272+5435, the diffuse galactic medium, and the Orion HII/photodissociation front - a selection of objects which span the evolutionary range of interstellar material. These data directly address the spectroscopic criticisms previously leveled at the PAH hypothesis and demonstrate that PAH-related molecular species are indeed responsible for this widespread emission. Furthermore, these fits reflect the structure, abundance, and ionization state of the interstellar PAHs and, in turn, provide direct insight into the processes of carbon nucleation, growth and evolution in circumstellar shells and the interstellar medium. To date, no other candidate material which has been proposed to account for the UIR emission can as readily and specifically reproduce these spectral variations. Given the ubiquity of these species, this work demonstrates the tremendous potential of these species as probes of a new and heretofore largely unexplored facet of astrochemistry - potential which should make PAHs the probe of the next millennium much as CO has been for the last quarter century.

Hudgins, Douglas M.↗
NASA NTRS2004

The Composition and Physical Structure of the Io Torus and Atmosphere

Generally speaking the goal of the research was to provide detailed spectral analysis of a Hopkins Ultraviolet Telescope EUV/FUV spectrum of the Io plasma torus. The specific research tasks outlined to achieve this goal were: Line identifications and brightnesses. Verify line identifications with independent data sets. Simple physical modeling to derive ne, ni, Te. Determine neutral source rates. Determine implications of minor species abundances for Io processes. Determine spatial structure from HUT data.

McGrath, Melissa↗
NASA NTRS2006

On the Origin of System III Asymmetries in the Io Torus

The Io plasma torus exhibits several intriguing asymmetries which offer insights to the processes that transport mass and energy through the system. While these asymmetries are increasingly well described observationally, most still lack physical explanations. One important asymmetry is fixed in the coordinate system corotating with Jupiter's magnetic field. Space-based and ground-based observations have shown that torus ions are hotter and more highly ionized around System III 20 deg. Our simulations show that this type of torus asymmetry can be caused by enhanced pickup of fresh ions from Io's neutral clouds near these longitudes. The enhancement is caused primarily by the tilt and offset of the torus relative to the neutral clouds. We will report on the model parameters required to match the observed asymmetries, and offer predictions which will allow a test of this hypothesis.

Schneider, N. M.↗
NASA NTRS2011

Observations of the Minor Species Al, Fe and Ca(+) in Mercury's Exosphere

We report the first detections of Al and Fe, and strict upper limits for Ca(+) in the exosphere of Mercury, using the HIRES spectrometer at the Keck I telescope. We report observed 4-sigma tangent columns of 1.5x10(exp 7) Al atoms per square centimeter at an altitude of 1220 km (1.5 Mercury radii (R(sub M)) from planet center), and that for Fe of 1.6 x 10 per square centimeter at an altitude of 950 km (1.4 R(sub M)). The observed 3-sigma Ca(+) column was 3.9x10(exp 6) ions per square centimeter at an altitude of 1630 km (1.67 R(sub M). A simple model for zenith column abundances of the neutral species were 9.5 x 10(exp 7) Al per square centimeter, and 3.0 x 10(exp 8) Fe per square centimeter. The observations appear to be consistent with production of these species by impact vaporization with a large fraction of the ejecta in molecular form. The scale height of the Al gas is consistent with a kinetic temperature of 3000 - 9000 K while that of Fe is 10500 K. The apparent high temperature of the Fe gas would suggest that it may be produced by dissociation of molecules. A large traction of both Al and Fe appear to condense in a vapor cloud at low altitudes.

Bida, Thomas A.↗
NASA NTRS2016

Observations of the Minor Species Al and Fe in Mercury's Exosphere

We report here on the first observational evidence of Al and Fe in the exosphere of Mercury, based on measurements of resolved emission lines of these metals with Keck-1/HIRES. Al emission was observed on two separate runs, in 2008 and 2013, with tangent column densities of 3.1 +/- 1.0 and 4.0 +/-1.5 x 10(exp 7) Al atoms cm(exp - 2) at altitudes of 1185 and 1870 km (1.5 and 1.75 R(sub M). The Al radiative intensity was seen to increase where the slit crossed the planetary penumbral shadow, and then decrease monotonically with altitude. Fe emission has been observed once, in 2009, indicating an extended source. We also present observed 3- Sigma Ca(+) upper limits near Mercury's equatorial anti-solar limb, from which an abundance limit of 4.0 x 10(exp 6) cm(exp -2) at 1650 km altitude is derived for the Ca ion. A simple model for zenith column abundances of the neutral species yields 1.9 -5.2 x 10(exp 7) Al cm(exp -2) , and 8.2 x 10(exp 8) Fe cm(exp -2) . The observations appear to be consistent with production of these species by impact vaporization, with a large fraction of the Al ejecta in molecular form, and that for Fe in mixed atomic and molecular forms. The scale height of the Al gas is consistent with a kinetic temperature of 6100-8000 K. The apparent high temperature and low density of the Al gas would suggest that it may be produced by dissociation of molecules.

Mercury↗
DOE OSTI2024

Initial Development of Fusion Magnet Simulation Capabilities for Performance and Safety Evaluation Using the MOOSE Framework

Fusion energy holds the promise of being a transformative technology as a carbon-neutral, sustainable source of energy. Whole device modeling and the development of fusion digital twins will be increasingly important for emerging fusion device concepts at both national laboratories and within the commercial fusion industry. However, meeting the challenge of whole device modeling of fusion energy devices requires robust, multiphysics, multiscale modeling and simulation technologies capable of running on large-scale supercomputers. Detailed analysis of individual systems at-scale is also required to ensure safe and efficient operation as well as provide the safety basis for future device designs and licensing activities. In a tokamak, toroidal and poloidal magnets confine and shape the fusion plasma to promote the fusion reaction. High plasma temperatures and high magnetic field requirements in modern design concepts (leading to high amounts of energy stored within each magnet) impose electrical, thermal, and mechanical loads on the magnet components, which in turn impacts the safety considerations of the magnet and their supporting systems. Idaho National Laboratory (INL) has a history of working in this space, including development and benchmarking of the Magnetic System Circuitry Analysis Program (MSCAP) and Magnet Arcing (MAGARC) codes to study magnet quench events; notably, MAGARC was used to study quenching during the ITER Engineering Design Activity. However, these legacy codes and capabilities are not parallel and scalable, and new tools are required for future advances in this area, which leads to the INL-developed Multiphysics Object-Oriented Simulation Environment (MOOSE) framework. Developed originally for fission reactor systems under United States Department of Energy, Office of Nuclear Energy modeling and simulation programs, the MOOSE framework has been well-suited to multiscale, multiphysics modeling and simulation needs for nuclear systems. The framework is open-source, well-tested, under continuous development and deployment, and developed to a Nuclear Quality Assurance, Level 1 software quality standard. MOOSE has also been used in the fusion space previously in several projects: INL’s Tritium Migration Analysis Program, Version 8 (TMAP8) for tritium migration, UK Atomic Energy Authority’s A Unified Resource for OpenMC (fusion) Reactor Applications (AURORA) code for fusion thermo-mechanical and neutronics analysis, and Argonne National Laboratory’s Cardinal for high-fidelity computational fluid dynamics and neutronics. However, to model superconducting magnets, several MOOSE enhancements are required: additions to the current MOOSE electromagnetic capabilities, new material libraries for superconductors of interest (such as YBCO), as well as fusion-specific models for thermo-mechanics. This talk will discuss initial development activities to build these capabilities in MOOSE, focusing on initial validation and benchmarking activities. Proposed coupling workflows and future work to support the simulation of fusion magnets and magnet structural assemblies for performance and safety evaluation in MOOSE will also be discussed.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Colloidal immobilized protein based on stable colloid of TiO 2 nanoparticles at neutral pH for protein microarray

A stable colloid of titanium dioxide nanoparticles was specially prepared at neutral pH so that horse radish peroxidase as a model protein can interact and be immobilized with colloidal titanium dioxide nanoparticles, while usually titanium dioxide colloid is only stable at acidic condition. Colloidal immobilized peroxidase based on titanium dioxide nanoparticles at neutral pH were highly active and stably dispersible in aqueous solution. The resulting colloidal immobilized peroxidase can be readily printed using a standard microarray printer for facile fabrication of protein microarrays. After printing, the colloidal immobilized protein formed uniform membrane of proteinated nanoparticles with 3-dimensional nanoconfiguration. Finally, the protein microarray sensitivity based on peroxidase-titanium dioxide nanoparticles was nearly 20 times as high as that using conventional technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1998

Wind Forcing of the North Sea Pole Tide

The Chandler wobble of the earth's rotation has a period near 14 months and sets up the 0.5 cm amplitude pole tide in the deep oceans, However, the pole tide is anomalously large in the North Sea, where the amplitude increases sharply up to 3 cm along the continental coast. It is shown here that the sea levels are well correlated with winds at the pole tide frequency. The Princeton Ocean Model is used to investigate the response of the North Sea to wind forcing. The barotropic numerical ocean model depicts realistic coastlines and bathymetry at 5 ft x 5 ft resolution, with 97 x 73 grid points. The monthly mean wind fields for the 40-year period (1958-1997) from the National Centers for Atmospheric Prediction (NCEP) reanalysis were used to force the model. The winds were converted to stress with a neutral drag coefficient that varied linearly with windspeed (instead of using the NCEP windstress). A 5-day simulation was made for each month until the resulting flow regime came into equilibrium, and model water levels at various station locations were saved for comparison with tidal-gauge observed sea levels from the Permanent Service for Mean Sea Level (PSMSL). The comparison is made for 10 North Sea stations with high quality tide gauge data. We find: (1) good agreement in annual and semi-annual phases and in the trend of amplitude w.r.t. latitude; (2) more importantly for this study, the model-predicted and observed non-seasonal sea level variations show a very significant temporal correlation as well as spectral coherence. However, a large amplitude difference exists between the two sets -- the overall amplitude variability of the observed is generally a factor of 2-3 larger than the model prediction (this same phenomenon has been reported in ocean circulation studies, although the cause is not yet clear.) Our results indicate that the wind forcing is the main cause of the observed large pole tide in the North Sea.

OConnor, W.↗
NASA NTRS1984

Advanced ion thruster research

A simple model describing the discharge chamber performance of high strength, cusped magnetic field ion thrusters is developed. The model is formulated in terms of the energy cost of producing ions in the discharge chamber and the fraction of ions produced in the discharge chamber that are extracted to form the ion beam. The accuracy of the model is verified experimentally in a series of tests wherein the discharge voltage, propellant, grid transparency to neutral atoms, beam diameter and discharge chamber wall temperature are varied. The model is exercised to demonstrate what variations in performance might be expected by varying discharge chamber parameters. The results of a study of xenon and argon orificed hollow cathodes are reported. These results suggest that a hollow cathode model developed from research conducted on mercury cathodes can also be applied to xenon and argon. Primary electron mean free paths observed in argon and xenon cathodes that are larger than those found in mercury cathodes are identified as a cause of performance differences between mercury and inert gas cathodes. Data required as inputs to the inert gas cathode model are presented so it can be used as an aid in cathode design.

Wilbur, P. J.↗
NASA NTRS2018

Marginal protein stability drives subcellular proteome isoelectric point

There exists a positive correlation between the pH of subcellular compartments and the median isoelectric point (pI) for the associated proteomes. Proteins in the human lysosome—a highly acidic compartment in the cell—have a median pI of ∼6.5, whereas proteins in the more basic mitochondria have a median pI of ∼8.0. Proposed mechanisms reflect potential adaptations to pH. For example, enzyme active site general acid/base residue pKs are likely evolved to match environmental pH. However, such effects would be limited to a few residues on specific proteins, and might not affect the proteome at large. A protein model that considers residue burial upon folding recapitulates the correlation between proteome pI and environmental pH. This correlation can be fully described by a neutral evolution process; no functional selection is included in the model. Proteins in acidic environments incur a lower energetic penalty for burying acidic residues than basic residues, resulting in a net accumulation of acidic residues in the protein core. The inverse is true under alkaline conditions. The pI distributions of subcellular proteomes are likely not a direct result of functional adaptations to pH, but a molecular spandrel stemming from marginal stability.

Kaiser Loell↗
NASA NTRS1997

Neutral Orbital Altitude Density Effects on the International Space Station

One of the design requirements of the International Space Station (ISS) is that each year accelerations of one micro-g cannot be exceeded at the ISS internal payload location for 6 periods of not less than 30 consecutive days. Although there are other causes, this study deals only with the accelerations caused by atmospheric drag. The critical ambient neutral density, computed using the Marshall Engineering Thermosphere Model, required to produce accelerations of one micro-g on the ISS, is estimated using an atmospheric drag acceleration equation. Results show that the design requirements may be difficult to meet during periods of extremely high solar activity; the planned reboost and altitude strategies for the ISS may have to be revised to allow for the uncertainty in the prediction of neutral atmospheric density within the 100-day period established for orbital decay before reboost.

Smith, O.E.↗
DOE OSTI2025

1D model of SOL with self consistent calculation of non-coronalradiation and applications to shallow field line angles

A 1D model of the scrape off layer (SOL) is created with a physics based calculation of the impurity radiation and the inclusion of the perpendicular heat flux q ⊥ compared to previous 1D models. The calculation of the impurity radiation includes the addition of a model using parallel and perpendicular motion to calculate the impurity confinement time τ and the inclusion of charge exchange between neutral hydrogen and impurity ions. Reasonable agreement is found between the model and the 2D fluid code SOLPS-ITER. Additionally, an improvement is shown over the constant τ used in previous works The model is used to examine the effects of shallow field line angles at ITER levels of parallel heat flux (q || ). A large increase in radiation results in an increase in the upstream parallel heat flux which can still be in detachment at shallow field line angles for both q ⊥ and the calculated τ for traditional impurities (argon and nitrogen) as well as boron. The physics behind this increase in radiation at shallow field line angles is shown to be a decrease in τ and a change in the temperature profile with the inclusion of q ⊥ .

ITER↗
NASA NTRS1984

An experimental investigation of cusped magnetic field discharge chambers

Several features of a proposed model of ion thruster performance are tested experimentally. The experiment conducted demonstrates the effects of variation in thruster operating parameters on the average plasma ion energy costs and extracted ion fractions of various ring and line cusp discharge chambers. The results indicate that the model correctly predicts the variation in the plasma ion energy cost resulting from changes in: propellant gas, grid transparency to neutral atoms, beam extraction area, and discharge voltage. In addition, the model is shown to be applicable to both ring and line cusp designs. Measurements of the extracted ion fraction indicate that this parameter tends to increase with decreasing discharge voltage and is generally higher for operation with argon as opposed to krypton propellant. Results suggest that to use the proposed thruster performance model as an aid in thruster design the performance may be described in terms of four thruster configuration dependent constants and two operating parameters.

Brophy, J. R.↗
NASA NTRS1990

Plasma density enhancements created by the ionization of the Earth's upper atmosphere by artificial electron beams

Analytical calculations and experimental observations relating to the interaction with the Earth's upper atmosphere of electron beams emitted from low altitude spacecraft are presented. The problem is described by two coupled nonlinear differential equations in the up-going (along a magnetic field line) and down-going differential energy flux. The equations are solved numerically, using the MSIS atmospheric model and the IRI ionospheric model. The results form the model compare well with recent observations from the CHARGE 2 sounding rocket experiment. Two aspects of the beam-neutral atmosphere interaction are discussed. First, the limits on the electron beam current that can be emitted from a spacecraft without substantial spacecraft charging are investigated. This is important because the charging of the spacecraft to positive potentials limits the current and the escape energy of the beam electrons and thereby limits the ionization of the neutral atmosphere. As an example, we find from CHARGE 2 observations and from the model calculations that below about 180 km, secondary electrons generated through the ionization of the neutral atmosphere by 1 to 10 keV electron beams from sounding rockets, completely balance the beam current, thereby allowing the emission of very high beam currents. Second, the amount of plasma production in the beam-streak is discussed. Results are shown for selected values of the beam energy, spacecraft velocity, and spacecraft altitude.

Neubert, Torsten↗
DOE OSTI2024

Immunization of cows with HIV envelope trimers generates broadly neutralizing antibodies to the V2-apex from the ultralong CDRH3 repertoire

The generation of broadly neutralizing antibodies (bnAbs) to conserved epitopes on HIV Envelope (Env) is one of the cornerstones of HIV vaccine research. The animal models commonly used for HIV do not reliably produce a potent broadly neutralizing serum antibody response, with the exception of cows. Cows have previously produced a CD4 binding site response by homologous prime and boosting with a native-like Env trimer. In small animal models, other engineered immunogens were shown to focus antibody responses to the bnAb V2-apex region of Env. Here, we immunized two groups of cows (n = 4) with two regimens of V2-apex focusing Env immunogens to investigate whether antibody responses could be generated to the V2-apex on Env. Group 1 was immunized with chimpanzee simian immunodeficiency virus (SIV)-Env trimer that shares its V2-apex with HIV, followed by immunization with C108, a V2-apex focusing immunogen, and finally boosted with a cross-clade native-like trimer cocktail. Group 2 was immunized with HIV C108 Env trimer followed by the same HIV trimer cocktail as Group 1. Longitudinal serum analysis showed that one cow in each group developed serum neutralizing antibody responses to the V2-apex. Eight and 11 bnAbs were isolated from Group 1 and Group 2 cows, respectively, and showed moderate breadth and potency. Potent and broad responses in this study developed much later than previous cow immunizations that elicited CD4bs bnAbs responses and required several different immunogens. All isolated bnAbs were derived from the ultralong CDRH3 repertoire. The finding that cow antibodies can target more than one broadly neutralizing epitope on the HIV surface reveals the generality of elongated structures for the recognition of highly glycosylated proteins. The exclusive isolation of ultralong CDRH3 bnAbs, despite only comprising a small percent of the cow repertoire, suggests these antibodies outcompete the long and short CDRH3 antibodies during the bnAb response.

Microbiology↗
DOE OSTI2023

Search for pair-produced scalar and vector leptoquarks decaying into third-generation quarks and first- or second-generation leptons in $pp$ collisions with the ATLAS detector

A search for pair-produced scalar and vector leptoquarks decaying into quarks and leptons of different generations is presented. It uses the full LHC Run 2 (2015–2018) data set of 139 fb -1 collected with the ATLAS detector in proton–proton collisions at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV. Scalar leptoquarks with charge -(1/3)$e$ as well as scalar and vector leptoquarks with charge +(2/3)$e$ are considered. All possible decays of the pair-produced leptoquarks into quarks of the third generation ($t, b$) and charged or neutral leptons of the first or second generation ($e, μ, ν$) with exactly one electron or muon in the final state are investigated. No significant deviations from the Standard Model expectation are observed. Upper limits on the production cross-section are provided for eight models as a function of the leptoquark mass and the branching ratio of the leptoquark into the charged or neutral lepton. In addition, lower limits on the leptoquark masses are derived for all models across a range of branching ratios. Two of these models have the goal of providing an explanation for the recent $B$-anomalies. In both models, a vector leptoquark decays into charged and neutral leptons of the second generation with a similar branching fraction. Lower limits of 1980 GeV and 1710 GeV are set on the leptoquark mass for these two models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Particle-based modelling of axisymmetric tandem mirror devices

In this work, we describe the use of a 1D-2V quasi-neutral hybrid electrostatic PIC with Monte-Carlo Coulomb collisions and non-uniform magnetic field to model the parallel transport and confinement in an axisymmetric tandem mirror device. End-plugs, based on simple-mirrors, are positioned at each end of the device and fueled with neutral beams (25 and 100 keV) to produce a sloshing ion population and increase the density of the end-plugs relative to the central cell. Results show the formation of a potential difference barrier between the central cell and the end-plugs. This potential confines a large fraction of the low energy thermal ions in the central cell which would otherwise be lost in a simple mirror, demonstrating the advantage of the beam-driven tandem mirror configuration relative to simple mirrors. In addition, we explore the effect of end-plug electron temperature on the confinement time of the device and compare it with theoretical estimates. Finally, we discuss the limitations of the code in its present form and describe the next logical steps to improve its predictive capability such as a fully nonlinear Fokker–Planck collision operator, multiply nested flux surface solutions and modeling the exhaust region up to the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗