SEARCH · Engineering Papers

Results for “modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Analysis of stress-strain, fracture and ductility behavior of aluminum matrix composites containing discontinuous silicon carbide reinforcement

Mechanical properties and stress-strain behavior for several types of commercially fabricated aluminum matrix composites, containing up to 40 vol % discontinuous SiC whisker, nodule, or particulate reinforcement were evaluated. It was found that the elastic modulus of the composites was isotropic, to be independent of type of reinforcement, and to be controlled solely by the volume percentage of SiC reinforcement present. The yield/tensile strengths and ductility were controlled primarily by the matrix alloy and temper condition. Ductility decreased with increasing reinforcement content, however, the fracture strains observed were higher than those reported in the literature for this type of composite. This increase in fracture strain is attributed to cleaner matrix powder and increased mechanical working during fabrication. Conventional aluminum and titanium structural alloys were compared and have shown that the properties of these low cost, lightweight composites have good potential for application to aerospace structures.

Mcdanels, D. L.↗

NASA NTRS1983

Module degradation catalyzed by metal-encapsulation reactions

Four major properties are considered to be relevant in determining service life of a photovoltaic module: (1) Mechanical: creep resistance, modulus, tensile strength; (2) Optical: integrated transmission at 0.4 to 1.1 m wavelength; (3) Chemical: inertness with respect to metals and other components, retention of stabilizers, etc. and (4) Electrical; maintaining effective isolation of conductive components. These properties were measured after exposing polymer specimens to three types of accelerated stress: thermal, ultraviolet radiation and metal catalysts. These conditions give rise to a large number of complex interrelated free-radical reactions that result in the deterioration of polymeric materials.

Gallagher, B. D.↗

NASA NTRS1984

Synthesis and toughness properties of resins and composites

Tensile and shear moduli of four ACEE (Aircraft Energy Efficiency Program) resins are presented along with ACEE composite material modulus predictions based on micromechanics. Compressive strength and fracture toughness of the resins and composites were discussed. In addition, several resin synthesis techniques are reviewed.

Johnston, N. J.↗

NASA NTRS1983

Physical aging and its influence on the reliability of network epoxies and epoxy-matrix composites

The matrix-dominated physical and mechanical properties of a carbon fiber reinforced epoxy composite and a neat epoxy resin were found to be affected by sub-Tg annealing in nitrogen and dark atmosphere. Postcured specimens of Thornel 300 carbon-fiber/Fiberite 934 epoxy as well as Fiberite 934 epoxy resin were quenched from above Tg and given annealing at 140 C, 110 C, or 80 C, for time up to one-hundred thousand minutes. No weight loss was observed during annealing at these temperatures. Significant variations were found in density, modulus, hardness, damping, moisture absorption ability, thermal expansivity. Moisture-epoxy interactious were also studied. The kinetics of aging as well as the molecular aggregation during this densification process were monitored by differential scanning calorimetry, dynamic mechanical analysis, density gradient column, microhardness tester, Instron, and solid-state nuclear magnetic resonance spectroscopy.

Heinemann, K.↗

NASA NTRS1984

Crack tip field and fatigue crack growth in general yielding and low cycle fatigue

Fatigue life consists of crack nucleation and crack propagation periods. Fatigue crack nucleation period is shorter relative to the propagation period at higher stresses. Crack nucleation period of low cycle fatigue might even be shortened by material and fabrication defects and by environmental attack. In these cases, fatigue life is largely crack propagation period. The characteristic crack tip field was studied by the finite element method, and the crack tip field is related to the far field parameters: the deformation work density, and the product of applied stress and applied strain. The cyclic carck growth rates in specimens in general yielding as measured by Solomon are analyzed in terms of J-integral. A generalized crack behavior in terms of delta is developed. The relations between J and the far field parameters and the relation for the general cyclic crack growth behavior are used to analyze fatigue lives of specimens under general-yielding cyclic-load. Fatigue life is related to the applied stress and strain ranges, the deformation work density, crack nucleus size, fracture toughness, fatigue crack growth threshold, Young's modulus, and the cyclic yield stress and strain. The fatigue lives of two aluminum alloys correlate well with the deformation work density as depicted by the derived theory. The general relation is reduced to Coffin-Manson low cycle fatigue law in the high strain region.

Minzhong, Z.↗

NASA NTRS1984

Mechanical behavior of carbon-carbon composites

A general background, test plan, and some results of preliminary examinations of a carbon-carbon composite material are presented with emphasis on mechanical testing and inspection techniques. Experience with testing and evaluation was gained through tests of a low modulus carbon-carbon material, K-Karb C. The properties examined are the density - 1.55 g/cc; four point flexure strength in the warp - 137 MPa (19,800 psi) and the fill - 95.1 MPa (13,800 psi,) directions; and the warp interlaminar shear strength - 14.5 MPa (2100 psi). Radiographic evaluation revealed thickness variations and the thinner areas of the composite were scrapped. The ultrasonic C-scan showed attenuation variations, but these did not correspond to any of the physical and mechanical properties measured. Based on these initial tests and a survey of the literature, a plan has been devised to examine the effect of stress on the oxidation behavior, and the strength degradation of coated carbon-carbon composites. This plan will focus on static fatigue tests in the four point flexure mode in an elevated temperature, oxidizing environment.

Rozak, G. A.↗

NASA NTRS1983

Rubber-toughened polyfunctional epoxies - Brominated vs nonbrominated formulated for graphite composites

A new, commercially available, trifunctional epoxy resin (tris-(hydroxyphenyl)-methane triglycidyl ether) was modified with synthetic rubber to increase the impact resistance of epoxy/graphite composites. These composites were reinforced with commercially available satin-weave carbon cloth using two formulations of epoxies (brominated and nonbrominated) containing various amounts of carboxy-terminated butadience acrylonitrile (CTBN) rubber that had been prereacted with epoxy resin. The impact resistance was determined by measuring the interlaminar shear strength of the composites after impact. The mechanical properties, such as flexural strength and modulus at room temperature and at 93 C, were also determined. Measurements were taken of the flammability and glass transition temperature (Tg); and a thermal-gravimetric analysis was made.

Nir, Z.↗

NASA NTRS1983

A new calibration of the extragalactic distance scale using Cepheids and RR Lyrae stars

Visual absolute magnitudes of classical Cepheids, metal-poor RR Lyrae stars and short-period type II Cepheids have been determined with very high precision by combining a large number of old and new astrophysical data. Five independent methods (four observational and one theoretical) have been successfully used: (1) secular and statistical parallaxes; (2) moving-group parallaxes; (3) cluster main-sequence fitting; (4) the Baade-Wesselink method and its modifications; and (5) light-curve and velocity-curve fitting (the theoretical method). With these five adopted methods, the zero point of the galactic and extragalactic distance scale can be set on a relatively firm and self-consistent basis. Classical Cepheids and RR Lyrae stars now provide essentially identical distances to nearby galaxies: the distance modulus to the Large Magellanic Cloud is 18.5 and to the Small Magellanic Cloud is 18.8, both with an uncertainty of 0.1. The distance to the center of our Galaxy is 8.6 plus or minus 0.5 kiloparsecs. The major uncertainty in these values lies in the correction for interstellar extinction.

Stothers, R. B.↗

NASA NTRS1983

Polyfunctional epoxies - Different molecular weights of brominated polymeric additives as flame retardants in graphite composites

The imparting of flame retardancy to graphite-reinforced composites without incurring mechanical property deterioration is investigated for the case of an experimental, trifunctional epoxy resin incorporating brominated polymeric additives (BPAs) of the diglycidyl type. Such mechanical properties as flexural strength and modulus, and short beam shear strength, were measured in dry and in hot/wet conditions, and the glass transition temperature, flammability, and water absorption were measured and compared with nonbromilated systems. Another comparison was made with a tetrafunctional epoxy system. The results obtained are explained in terms of differences in the polymeric backbone length of the bromine carrier polymer. BPAs are found to be a reliable bromine source for fire inhibition in carbon-reinforced composites without compromise of mechanical properties.

Nir, Z.↗

NASA NTRS1983

Wrinkling phenomenon in structures. II - Wrinkling criteria

The wrinkling phenomenon in elasticity is mathematically defined and described as a special type of instability associated with the loss of hyperbolicity of the governing equations when some of the characteristic speeds of elastic wave propagation become imaginary. The developed criteria of wrinkling are applied to such structural elements as membranes, strings, soft shells, soft rods, and laminated material. The cause of wrinkling in these elements is due to compression in longitudinal directions that exceeds the through-the-thickness shear modulus. For elements with internal fluid flow the critical compression is reduced due to the destabilizing effect of the flow. The most effective mathematical analysis technique is a combination of tensor analysis and index notations.

Zak, M.↗

NASA NTRS1984

Application of a peak-valley detector for secant stiffness measurements

A technique for monitoring the change in secant stiffness of composite specimens during cyclic-fatigue loading computes the secant modulus every five seconds. A resettable peak-valley detector, which captures and holds the maximum and minimum values of an input analog signal, is used in conjunction with a multichannel data acquisition unit. This detector is also used in conjunction with an analog switch to halt the cycling of the specimen after a certain degradation of stiffness develops for the application of NDE techniques. Results for a T300/5208 graphite-epoxy specimen are presented in the form of a stiffness vs number of cycles curve.

Stiffler, R.↗

NASA NTRS1982

Empirical testing of structural deflection modeling of large photovoltaic modules

The objective of the structural deflection test was to verify the analytical models used to predict solar cell stress, load-bearing layer stress, and module deflection that result from a uniform pressure load on the module surface. The verification process consisted of measuring module deflection, stress in the solar cell, and stress in the load-bearing member as a functon of normal pressure load, pottant modulus of elasticity, pottant thickness, and cell location. Four glass superstrate modules, two plain wood substrate modules, two ribbed wood substrate modules, and a steel substrate module were tested. Consistent with analysis predictions, all unribbed specimens exhibited nonlinear load vs. deflection characteristics. With the exception of the steel module, test results and analysis predictions for panel deflectons agreed to within 10 percent. A wider variation of agreement was found for stress in the load-bearing members and cells.

Duncan, L. B.↗

NASA NTRS1983

Thermal stresses in bonded solar cells - The effect of the adhesive layer

A two-dimensional, rectangular model of a proposed solar cell structure is analyzed as two plate elements bonded with an elastic continuum. The governing equations are formulated using the principle of minimum potential energy, with displacement components that vary linearly through the thickness of the adhesive layer. An approximate solution is constructed for a particular class of material properties and is characterized by a boundary layer near the unloaded edge. Both interface stress components achieve their largest values at the edge, and the maximum shear stress is independent of the Young's Modulus of the substrate.

Williams, H. E.↗

NASA NTRS1982

Durability/life of fiber composites in hygrothermomechanical environments

Statistical analysis and multiple regression were used to determine and quantify the significant hygrothermomechanical variables which influence the tensile durability/life (cycle loading, fatigue) of boron-fiber/epoxy-matrix (B/E) and high-modulus-fiber/epoxy-matrix (HMS/E) composites. The use of the multiple regression analysis reduced the variables from fifteen, assumed initially, to six or less with a probability of greater than 0.999. The reduced variables were used to derive predictive models for compression and intralaminar shear durability/life of B/E and HMS/E composites assuming isoparametric fatigue behavior. The predictive models were subsequently generalized to predict the durability/life of graphite/fiber-r generalized model is of simple form, predicts conservative values compared with measured data and should be adequate for use in preliminary designs. Previously announced in STAR as N82-14287

Chamis, C. C.↗

NASA NTRS1984

Elastic model of the traction behavior of two traction lubricants

In the analysis of rolling-sliding concentrated contacts, such as gears, bearings and traction drives, the traction characteristics of the lubricant are of prime importance. The elastic shear modulus and limiting shear stress properties of the lubricant dictate the traction/slip characteristics and power loss associated with an EHD contact undergoing slip and/or spin. These properties can be deducted directly from the initial slope m and maximum traction coefficient micron of an experimental traction curve. In this investigation, correlation equations are presented to predict m and micron for two modern traction fluids based on the regression analysis of 334 separate traction disk machine experiments. The effects of contact pressure, temperature, surface velocity, ellipticity ratio are examined. Problems in deducing lubricant shear moduli from disk machine tests are discussed. Previously announced in STAR as N83-20116

Loewenthal, S. H.↗

NASA NTRS1984

Stellar populations in local group dwarf elliptical galaxies. II - NGC 205

NGC 205, a dwarf elliptical companion of M31, was studied using deep CCD photometry on the VRI system. Consideration is given to a comparison between the giant branch and the Galactic globular clusters, the degree of chemical enrichment in the outer parts of NGC 204, and the setting of constraints on the stellar population of NGC 205. Should the distance of the galaxy be that of M31, this field's stellar population is extremely old. If star formation in NGC 205 is a recurring phenomenon, it is confined to the interior of the galaxy. Should the stellar population of NGC 205 be as old as Galactic globular clusters, its distance modulus is 24.3 + or - 0.2. The giant branch location corresponds to a mean metallicity greater than or equal to -0.9 + or - 0.2, and a metallicity dispersion is determined to be sigma greater than or equal to 0.5 dex. Also noted is that the color distribution at a given luminosity appears to be positively skewed.

Mould, J.↗

NASA NTRS1983

Damping mechanisms in fiber reinforced laminates

Low strain damping in fiber reinforced composite materials is due to material loss factors in both fibers and matrix materials. The high modulus of the fibers makes up for the low damping factor. Strains high enough to cause transverse layer cracking in laminates with organic matrix materials causes a large permanent increase in the damping factor. This increase is not due to the transverse cracks but rather to short microcracks in the high shear strain regions. Other damping mechanisms at high strains are also discussed.

Plunkett, R.↗

NASA NTRS1984

Geometrically nonlinear analysis of adhesively bonded joints

A geometrically nonlinear finite element analysis of cohesive failure in typical joints is presented. Cracked-lap-shear joints were chosen for analysis. Results obtained from linear and nonlinear analysis show that nonlinear effects, due to large rotations, significantly affect the calculated mode 1, crack opening, and mode 2, inplane shear, strain-energy-release rates. The ratio of the mode 1 to mode 2 strain-energy-release rates (G1/G2) was found to be strongly affected by the adhesive modulus and the adherend thickness. The ratios between 0.2 and 0.8 can be obtained by varying adherend thickness and using either a single or double cracked-lap-shear specimen configuration. Debond growth rate data, together with the analysis, indicate that mode 1 strain-energy-release rate governs debond growth. Results from the present analysis agree well with experimentally measured joint opening displacements. Previously announced in STAR as N83-13497

Dattaguru, B.↗