Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Increased Electrical Conductivity in a Mesoporous Metal–Organic Framework Featuring Metallacarboranes Guests

Nickel(IV) bis(dicarbollide) is incorporated in a zirconium-based metal organic framework (MOF), NU-1000, to create an electrically conductive MOF with mesoporosity. All the nickel bis(dicarbollide) units are located as guest molecules in the microporous channels of NU-1000, which permits the further incorporation of other active species in the remaining mesopores. For demonstration, manganese oxide is installed on the nodes of the electrically conductive MOF. The electrochemically addressable fraction and specific capacitance of the manganese oxide in the conductive framework are more than 10 times higher than those of the manganese oxide in the parent MOF.

Kung, Chung-Wei↗

Isolating Clusters of Light Elements in Molecular Sieves with Atom Probe Tomography

Understanding the 3-D distribution and nature of active sites in heterogeneous catalysts is critical to developing structure–function relationships. However, this is difficult to achieve in microporous materials as there is little relative z-contrast between active and inactive framework elements (e.g., Al, O, P, and Si), making them difficult to differentiate with electron microscopies. We have applied atom probe tomography (APT), currently the only nanometer-scale 3-D microscopy to offer routine light element contrast, to the methanol-to-hydrocarbons (MTH) catalyst SAPO-34, with Si as the active site, which may be present in the framework as either isolated Si species or clusters (islands) of Si atoms. 29Si solid-state NMR data on isotopically enriched and natural abundance materials are consistent with the presence of Si islands, and the APT results have been complemented with simulations to show the smallest detectable cluster size as a function of instrument spatial resolution and detector efficiency. We have identified significant Si–Si affinity in the materials, as well as clustering of coke deposited by the MTH reaction (13CH3OH used) and an affinity between Brønsted acid sites and coke. A comparison with simulations shows that the ultimate spatial resolution that can be attained by APT applied to molecular sieves is 0.5–1 nm. Finally, the observed 13C clusters are consistent with hydrocarbon pool mechanism intermediates that are preferentially located in regions of increased Brønsted acidity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Reorganization and Confinement of Ti IV Active Sites Controls Olefin Epoxidation Catalysis on Two-Dimensional Zeotypes

The effect of dynamic reorganization and confinement of isolated Ti IV catalytic centers supported on silicates is investigated for olefin epoxidation. Active sites consist of grafted single-site calix[4]arene–Ti IV centers or their calcined counterparts. Their location is synthetically controlled to be either unconfined at terminal T-atom positions (denoted as type-(i)) or within confining 12-MR pockets (denoted as type-(ii); diameter ~7 Å, volume ~185 Å 3 ) composed of hemispherical cavities on the external surface of zeotypes with *-SVY topology. Electronic structure calculations (density functional theory) indicate that active sites consist of cooperative assemblies of TiIV centers and silanols. When active sites are located at unconfined type-(i) environments, the rate constants for cyclohexene epoxidation (323 K, 0.05 mM TiIV, 160 mM cyclohexene, 24 mM tert-butyl hydroperoxide) are 9 ± 2 M –2 s –1 ; whereas within confining type-(ii) 12-MR pockets, there is a ~5-fold enhancement to 48 ± 8 M –2 s –1 . When a mixture of both environments is initially present in the catalyst resting state, the rate constants reflect confining environments exclusively (40 ± 11 M–2 s–1), indicating that dynamic reorganization processes lead to the preferential location of active sites within 12-MR pockets. While activation enthalpies are ΔH ‡ app = 43 ± 1 kJ mol–1 irrespective of active site location, confining environments exhibit diminished entropic barriers (ΔS ‡ app = -68 J mol –1 K –1 for unconfined type-(i) vs -56 J mol –1 K –1 for confining type-(ii)), indicating that confinement leads to more facile association of reactants at active sites to form transition state structures (volume ~ 225 Å 3 ). These results open new opportunities for controlling reactivity on surfaces through partial confinement on shallow external-surface pockets, which are accessible to molecules that are too bulky to benefit from traditional confinement within micropores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measuring and Modulating Substrate Confinement during Nitrogen-Atom Transfer in a Ru 2 -Based Metal-Organic Framework

The porosity and synthetic tunability of metalorganic frameworks (MOFs) motivate interest in application of these materials as designer heterogeneous catalysts. While understanding substrate mobility in these materials is critical to the rational development of highly active catalyst platforms, experimental data are rarely available. Here we demonstrate kinetic isotope effect (KIE) analysis enables direct evaluation of the extent of substrate confinement as a function of material mesoporosity. Further, we provide evidence that suggests substrate confinement within a microporous Ru 2 -based MOF gives rise to quantum tunneling during interstitial C–H amination. Here, the reported data provide the first evidence for tunneling during interstitial MOF chemistry and illustrate an experimental strategy to evaluate the impact of material structure on substrate mobility in porous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Insight into Fluorocarbon Adsorption in Pore Expanded Metal–Organic Framework Analogs

The rapid growth in the global energy demand for space cooling requires the development of more efficient environmental chillers for which adsorption-based cooling systems can be utilized. Here, in this contribution, we explore sorbents for chiller use via a pore-engineering concept to construct analogs of the 1-dimensional pore metal–organic framework MOF-74 by using elongated organic linkers and stereochemistry control. The prepared pore-engineered MOFs show remarkable equilibrium adsorption of the selected fluorocarbon refrigerant that is translated to a modeled adsorption-based refrigeration cycle. To probe molecular level interactions at the origin of these unique adsorption properties for this series of Ni-MOFs, we combined in situ synchrotron X-ray powder diffraction, neutron powder diffraction, X-ray absorption spectroscopy, calorimetry, Fourier transform infrared techniques, and molecular simulations. Our results reveal the coordination of fluorine (of CH2F in R134a) to the nickel(II) open metal centers at low pressures for each Ni-MOF analog and provide insight into the pore filling mechanism for the full range of the adsorption isotherms. The newly designed Ni-TPM demonstrates exceptional R134a adsorption uptake compared to its parent microporous Ni-MOF-74 due to larger engineered pore size/volume. The application of this adsorption performance toward established chiller conditions yields a working capacity increase for Ni-TPM of about 400% from that of Ni-MOF-74, which combined with kinetics directly correlates to both a higher coefficient of performance and a higher average cooling capacity generated in a modeled chiller.

Zheng, Jian↗

Activity of Cu-Al-oxo extra-framework clusters for selective methane oxidation on Cu exchanged zeolites

Cu-zeolites are able to directly convert methane to methanol via a 3-step process using O2 as oxidant. Among the different zeolite topologies, Cu-exchanged mordenite (MOR) shows the highest methanol yields, attributed to a preferential formation of active Cu-oxo species in its 8-MR pores. The presence of extra-framework or partially detached Al species entrained in the micropores of MOR leads to the formation of nearly homotopic redox active Cu-Al-oxo nanoclusters with the ability to activate CH4. Studies of the activity of these sites together with characterization by 27Al NMR and IR spectroscopy leads to the conclusion that the active species are located in the 8-MR side pockets of MOR and it consists of two Cu ions and one Al linked by O. This Cu-Al oxo cluster shows an activity per Cu in methane oxidation significantly higher than of any previ-ously reported active Cu-oxo species. In order to determine unambiguously the structure of the active Cu-Al-oxo cluster, we combine experimental XANES of Cu K- and L- edges, Cu K-edge HERFD-XANES and Cu K-edge EXAFS with TDDFT and AIMD-assisted simulations. Our results provide evidence of a [Cu2AlO3]2+ cluster exchanged on MOR Al pairs that is able to oxidize up to two methane molecules per cluster at ambient pressure.

Methane oxidation, Cu L3-edge XANES, HERFD, TDDFT,↗

In Situ Detection of Amino Acids from Bacterial Biofilms and Plant Root Exudates by Liquid Microjunction Surface-Sampling Probe Mass Spectrometry

The plant rhizosphere is a complex and dynamic chemical environment where the exchange of molecular signals between plants, microbes, and fungi drives the development of the entire biological system. Exogenous compounds in the rhizosphere are known to affect plant-microbe organization, interactions between organisms, and ultimately, growth and survivability. The function of exogenous compounds in the rhizosphere is still under much investigation, specifically with respect to their roles in plant growth and development, the assembly of the associated microbial community, and the spatiotemporal distribution of molecular components. A major challenge for spatiotemporal measurements is developing a nondisruptive and nondestructive technique capable of analyzing the exogenous compounds contained within the environment. A methodology using liquid microjunction-surface sampling probe-mass spectrometry (LMJ-SSP-MS) and microfluidic devices with attached microporous membranes was developed for in situ, spatiotemporal measurement of amino acids (AAs) from bacterial biofilms and plant roots. Exuded arginine was measured from a living Pantoea YR 343 biofilm, which resulted in a chemical image indicative of biofilm growth within the device. Spot sampling along the roots of Populus trichocarpa with the LMJ-SSP-MS resulted in the detection of 15 AAs. Of note, variation in AA concentrations across the root system was observed, indicating that exudation is not homogeneous and may be linked to local rhizosphere architecture and different biological processes along the root.

59 BASIC BIOLOGICAL SCIENCES↗

In Situ X-Ray Fluorescence Measurements During Atomic Layer Deposition: Nucleation and Growth of TiO2 on Planar Substrates and in Nanoporous Films

Synchrotron-based X-ray fluorescence (XRF) is introduced as a promising in situ technique to monitor atomic layer deposition cycle-per-cycle. It is shown that the technique is greatly suitable to study initial nucleation on planar substrates. The initial growth of TiO{sub 2} from tetrakis(dimethylamino)titanium (TDMAT) and H{sub 2}O is found to be linear on thermally grown SiO{sub 2}, substrate-inhibited on H-terminated Si and substrateenhanced on atomic layer deposited Al{sub 2}O{sub 3}. Furthermore, in situ XRF is employed to monitor the Ti uptake during deposition of TiO{sub 2} in nanoporous silica films. In mesoporous films, the Ti content varied quadratically with the number of cycles, a behavior that is attributed to a decreasing surface area with progressing deposition. In microporous films, the XRF data suggest that 1-3 ALD cycles shrunk the pore diameters below the kinetic diameter of the TDMAT molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Effects and Interactions of Carbon Dioxide Molecules Adsorbed on Ni, Zn, and Cd Nitroprussides

A thorough structural characterization of the synthesized Ni-, Zn-, and Cd-nitroprussides (NPs) with X-ray diffraction (XRD), thermogravimetric analysis, diffuse reflectance infrared Fourier transform spectrometry (DRIFTS), M€ossbauer spectroscopy, and magnetic measurements was performed. We studied the innovative part of the research for the structural effects and the interactions of the CO 2 molecule with the Ni-, Zn-, Cd-NP frameworks. DRIFTS of adsorbed molecules, high pressure adsorption, and in situ XRD adsorption experiments were performed. The DRIFTS spectra displayed peaks assigned to CO 2 physical adsorption and the formation of adducts (M 2+ ∙∙∙ O=C=O). The fitting of the adsorption data to the Dubinin₋Radushkevich equation and a Langmuir-type equation for volume filling allowed the calculation of the micropore volume and the isosteric heats of adsorption. Furthermore, the calculated parameters indicated an unusual behavior of the adsorption process in Cd-NP at high pressure. This fact was caused by the interaction of CO 2 molecules with the framework cations and the small adsorption space of Cd-NP. The Ni- and Zn-NPs behaved normally. The Pawley fitting of the XRD profiles of the dehydrated materials and under CO 2 adsorption indicated that in both cases Ni-NP, Zn-NP, and Cd-NPs displayed the Fm$\overline{3}$m, R$\overline{3}$, and Pnma space groups, respectively. The dehydrated samples demonstrated a change in the cell parameters. But, only Cd-NP presented a noticeable variation of its cell parameters under CO 2 adsorption. This fact was linked to the unusual behavior of the adsorption process in Cd-NP. In addition, we show that dehydrated Ni-, Zn-, and Cd-NPs can store 27, 22, and 15 wt % of CO 2 at 298 K and 9 atm., respectively. Then, Ni- and Cd-NPs are excellent for CO 2 storage, and Cd-NP is good for gas cleaning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lewis Acid–Base Interactions between Polysulfides and Metal Organic Framework in Lithium Sulfur Batteries

Lithium–sulfur (Li–S) battery is one of the most promising energy storage systems because of its high specific capacity of 1675 mAh g –1 based on sulfur. However, the rapid capacity degradation, mainly caused by polysulfide dissolution, remains a significant challenge prior to practical applications. This work demonstrates that a novel Ni-based metal organic framework (Ni-MOF), Ni 6 (BTB) 4 (BP) 3 (BTB = benzene-1,3,5-tribenzoate and BP = 4,4'-bipyridyl), can remarkably immobilize polysulfides within the cathode structure through physical and chemical interactions at molecular level. The capacity retention achieves up to 89% after 100 cycles at 0.1 C. Finally, the excellent performance is attributed to the synergistic effects of the interwoven mesopores (~2.8 nm) and micropores (~1.4 nm) of Ni-MOF, which first provide an ideal matrix to confine polysulfides, and the strong interactions between Lewis acidic Ni(II) center and the polysulfide base, which significantly slow down the migration of soluble polysulfides out of the pores, leading to the excellent cycling performance of Ni-MOF/S composite.

Environmental Molecular Sciences Laboratory↗

Characterization of the intragranular water regime within subsurface sediments: Pore volume, surface area, and mass transfer limitations

Although 'intragranular' pore space within grain aggregates, grain fractures, and mineral 24 surface coatings may contain a relatively small fraction of the total porosity within a porous 25 medium, it often contains a significant fraction of the reactive surface area, and can thus strongly 26 affect the transport of sorbing solutes. In this work, we demonstrate a batch experiment 27 procedure using tritium and bromide as high-resolution diffusive tracers to characterize the 28 intragranular pore space. The method was tested using uranium-contaminated sediments from 29 the vadose and capillary fringe zones beneath the former 300A process ponds at the Hanford site 30 (Washington State, USA). Sediments were contacted with tracers in artificial groundwater, 31 followed by replacement of bulk solution with tracer-free groundwater and monitoring of tracer 32 release. From these data, intragranular pore volumes were calculated and mass transfer rates 33 were quantified using a multirate first-order mass transfer model. Tritium-hydrogen exchange 34 on surface hydroxyls was accounted for by conducting additional tracer experiments on sediment 35 that was vacuum dried after reaction. The complementary ('wet' and 'dry') techniques allowed 36 for the simultaneous determination of intragranular porosity and surface area using tritium. The 37 Hanford 300A samples exhibited intragranular pore volumes of {approx}1% of the solid volume and 38 intragranular surface areas of {approx}20-30% of the total surface area. Comparison with N2 gas 39 adsorption suggests that this pore space includes both 'micropores' (< 2 nm diameter) and 40 'mesopores' (> 2 nm). Intragranular porosity estimates obtained using bromide were 41 significantly smaller, likely due to anion exclusion of Br- from pores with negatively charged 42 surfaces.

300A↗

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 2. Quantitative Moisture Dynamics Estimation Model

Abstract The long‐term containment of high‐level radioactive waste in geological disposal repositories relies on Engineered Barrier Systems (EBS), with bentonite clay emerging as a candidate material due to its unique properties. Understanding moisture dynamics within bentonite buffers is crucial for EBS performance, as it directly influences the material's swelling capacity, thermal and hydraulic conductivity, mechanical properties, and long‐term evolution under complex thermal‐hydrological‐mechanical (THM) processes. This study develops an advanced Electrical Resistivity Tomography (ERT)‐based framework to quantitatively monitor moisture dynamics under THM conditions. Our framework extends the Waxman‐Smits model to incorporate the coupled effects of temperature, water content, fluid chemistry, and mechanical changes on bentonite's electrical properties. Utilizing HotBENT‐Lab data from our companion paper, which includes electrical conductivity, CT density, and thermocouple measurements, this study offers a novel methodological framework bridging different scales of the model. Our results show that the extended model can estimate water content from ERT data, capturing spatial and temporal variations in moisture distribution within bentonite columns. However, the model tends to overestimate water content compared to CT density‐derived measurements. We address this discrepancy by incorporating a simplified swelling effect model, which improves agreement between ERT and CT density‐based water content estimates. We also discuss model limitations, including simplified treatment of swelling and micropore effects, and propose a conceptual framework for transitioning from laboratory to field applications, addressing challenges such as parameter scalability, field validation methods, and integration of diverse data sources. This ERT‐based framework can potentially advance real‐world moisture monitoring of bentonite‐based EBS in nuclear waste repositories. Plain Language Summary Safely containing high‐level radioactive waste depends on barriers made from materials like bentonite clay, which is effective because it swells and seals in the waste. To ensure these barriers work well over time, it's important to understand how moisture moves through the clay. Our study developed a new method using ERT to monitor moisture levels in bentonite under conditions that mimic those in actual storage sites, including changes in temperature, water content, and mechanical stress. This study improved an existing model to better account for how these factors affect the clay, allowing us to create more accurate moisture maps. Initially, the proposed model overestimated the amount of water in the clay, but its accuracy was improved by factoring in how the clay swells when wet. This study also identified some limitations of the model and suggested ways to adapt it for use in real‐world waste storage sites. This new approach could lead to better monitoring and safety checks for nuclear waste storage systems, helping to ensure long‐term containment. Key Points This work develops an ERT‐based framework extending the Waxman‐Smits model to monitor bentonite moisture dynamics during coupled THM processes The extended model accurately estimates water content from Electrical Resistivity Tomography data, incorporating swelling effects to improve precision This work proposes a conceptual framework for transitioning from laboratory to field applications, advancing EBS monitoring in nuclear waste repositories

Chen, Hang↗

Ultra-selective high-flux membranes from directly synthesized zeolite nanosheets

A zeolite with structure type MFI is an aluminosilicate or silicate material that has a three-dimensionally connected pore network, which enables molecular recognition in the size range 0.5-0.6 nm. These micropore dimensions are relevant for many valuable chemical intermediates, and therefore MFI-type zeolites are widely used in the chemical industry as selective catalysts or adsorbents. As with all zeolites, strategies to tailor them for specific applications include controlling their crystal size and shape. Nanometre-thick MFI crystals (nanosheets) have been introduced in pillared and self-pillared (intergrown) architectures, offering improved mass-transfer characteristics for certain adsorption and catalysis applications. Moreover, single (non-intergrown and nonlayered) nanosheets have been used to prepare thin membranes that could be used to improve the energy efficiency of separation processes. However, until now, single MFI nanosheets have been prepared using a multi-step approach based on the exfoliation of layered MFI9,15, followed by centrifugation to remove non-exfoliated particles. This top-down method is time-consuming, costly and low-yield and it produces fragmented nanosheets with submicrometre lateral dimensions. Alternatively, direct (bottom-up) synthesis could produce high-aspect-ratio zeolite nanosheets, with improved yield and at lower cost. Here we use a nanocrystal-seeded growth method triggered by a single rotational intergrowth to synthesize high-aspect-ratio MFI nanosheets with a thickness of 5 nanometres (2.5 unit cells). These high-aspect-ratio nanosheets allow the fabrication of thin and defect-free coatings that effectively cover porous substrates. Finally, these coatings can be intergrown to produce high-flux and ultra-selective MFI membranes that compare favourably with other MFI membranes prepared from existing MFI materials (such as exfoliated nanosheets or nanocrystals).

36 MATERIALS SCIENCE↗

Construction of hierarchically porous metal–organic frameworks through linker labilization

One major goal of metal–organic framework (MOF) research is the expansion of pore size and volume. Although many approaches have been attempted to increase the pore size of MOF materials, it is still a challenge to construct MOFs with precisely customized pore apertures for specific applications. W present a new method, namely linker labilization, to increase the MOF porosity and pore size, giving rise to hierarchical-pore architectures. Microporous MOFs with robust metal nodes and pro-labile linkers were initially synthesized. The mesopores were subsequently created as crystal defects through the splitting of a pro-labile-linker and the removal of the linker fragments by acid treatment. We also demonstrate that linker labilization method can create controllable hierarchical porous structures in stable MOFs, which facilitates the diffusion and adsorption process of guest molecules to improve the performances of MOFs in adsorption and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A solid with a hierarchical tetramodal micro-meso-macro pore size distribution

Porous solids have an important role in addressing some of the major energy-related problems facing society. Here we describe a porous solid, a-MnO 2 , with a hierarchical tetramodal pore size distribution spanning the micro-, meso- and macro pore range, centred at 0.48, 4.0, 18 and 70 nm. The hierarchical tetramodal structure is generated by the presence of potassium ions in the precursor solution within the channels of the porous silica template; the size of the potassium ion templates the microporosity of a-MnO 2 , whereas their reactivity with silica leads to larger mesopores and macroporosity, without destroying the mesostructure of the template. The hierarchical tetramodal pore size distribution influences the properties of a-MnO 2 as a cathode in lithium batteries and as a catalyst, changing the behaviour, compared with its counterparts with only micropores or bimodal micro/mesopores. The approach has been extended to the preparation of LiMn 2 O 4 with a hierarchical pore structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗