Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “matrix theories”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Machine-learning prediction for quasiparton distribution function matrix elements

There have been rapid developments in the direct calculation in lattice QCD (LQCD) of the Bjorken-x dependence of hadron structure through large-momentum effective theory (LaMET). LaMET overcomes the previous limitation of LQCD to moments (that is, integrals over Bjorken x) of hadron structure, allowing LQCD to directly provide the kinematic regions where the experimental values are least known. LaMET requires large-momentum hadron states to minimize its systematics and allow us to reach small- x reliably. This means that very fine lattice spacing to minimize lattice artifacts at order $(P_za)^n$ will become crucial for next-generation LaMET-like structure calculations. Furthermore, such calculations require operators with long Wilson-link displacements, especially in finer lattice units, increasing the communication costs relative to that of the propagator inversion. In this work, we explore whether machine-learning algorithms can make predictions of correlators to reduce the computational cost of these LQCD calculations. We consider two algorithms, gradient-boosting decision tree and linear models, applied to LaMET data, the matrix elements needed to determine the kaon and $η_s$ unpolarized parton distribution functions (PDFs), meson distribution amplitude (DA), and the nucleon gluon PDF. We find that both algorithms can reliably predict the target observables with different prediction accuracy and systematic errors. The predictions from smaller displacement z to larger ones work better than those for momentum p due to the higher correlation among the data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1993

Robust nonlinear control of vectored thrust aircraft

An interdisciplinary program in robust control for nonlinear systems with applications to a variety of engineering problems is outlined. Major emphasis will be placed on flight control, with both experimental and analytical studies. This program builds on recent new results in control theory for stability, stabilization, robust stability, robust performance, synthesis, and model reduction in a unified framework using Linear Fractional Transformations (LFT's), Linear Matrix Inequalities (LMI's), and the structured singular value micron. Most of these new advances have been accomplished by the Caltech controls group independently or in collaboration with researchers in other institutions. These recent results offer a new and remarkably unified framework for all aspects of robust control, but what is particularly important for this program is that they also have important implications for system identification and control of nonlinear systems. This combines well with Caltech's expertise in nonlinear control theory, both in geometric methods and methods for systems with constraints and saturations.

Doyle, John C.↗
DOE OSTI2022

A non-commutative Bayes' theorem

Using a diagrammatic reformulation of Bayes' theorem, we provide a necessary and sufficient condition for the existence of Bayesian inference in the setting of finite-dimensional C* -algebras. In other words, we prove an analogue of Bayes' theorem in the joint classical and quantum context. Our analogue is justified by recent advances in categorical probability theory, which have provided an abstract formulation of the classical Bayes' theorem. In the process, we further develop non-commutative almost everywhere equivalence and illustrate its important role in non-commutative Bayesian inversion. The construction of such Bayesian inverses, when they exist, involves solving a positive semidefinite matrix completion problem for the Choi matrix. This gives a solution to the open problem of constructing Bayesian inversion for completely positive unital maps acting on density matrices that do not have full support. In conclusion, we illustrate how the procedure works for several examples relevant to quantum information theory.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Scaling similarities and quasinormal modes of D0 black hole solutions

We study the gravity solution dual to the D0 brane quantum mechanics, or BFSS matrix model, in the ’t Hooft limit. The classical physics described by this gravity solution is invariant under a scaling transformation, which changes the action with a specific critical exponent, sometimes called the hyperscaling violating exponent. We present an argument for this critical exponent from the matrix model side, which leads to an explanation for the peculiar temperature dependence of the entropy in this theory, S ∝ T 9/5 . We also present a similar argument for all other Dp-brane geometries. We then compute the black hole quasinormal modes. This involves perturbing the finite temperature geometry. These perturbations can be easily obtained by a mathematical trick where we view the solution as the dimensional reduction of an Ad S2+9/5 × S 8 geometry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Advanced thermal/environmental barrier coatings of high-entropy rare earth disilicates tuned by strong anharmonicity of Eu 2 Si 2 O 7

Advancing thermal/environmental barrier coating (TEBC) materials with integrated thermal-mechanical functions is paramount for safeguarding SiC-based ceramic matrix composites (CMCs) in high-efficiency gas turbines. Herein, we employ a synergistic approach, combining density functional theory (DFT) methods and combinatorial chemistry techniques, to design high-performance and low-cost RE 2 Si 2 O 7 (RE = rare earth elements) TEBC materials tailored for enhanced compatibility with SiC-based CMCs. Expanding on phase stability of alloying pure RE 2 Si 2 O 7 , the investigation extends to the mechanical and thermal properties of solid solution systems, including Er 1/2 Y 3/4 Yb 3/4 Si 2 O 7 , Gd 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 , and Eu 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 . The solid solution systems exhibit a major reduction in lattice thermal conductivity relative to their pure counterparts, achieving ultralow values of 0.25 to 0.39 W m −1 K −1 at 1500 K. Furthermore, the coefficients of thermal expansion (CTE) of these solid solutions are precisely tuned within the desired range for SiC (4.4 to 5.5 × 10 −6 K −1 ), while maintaining good mechanical properties. Here, in particular, the addition of Eu 2 Si 2 O 7 demonstrates to be an important variable to the tuning of CTE and lattice thermal conductivity by leveraging its strong anharmonicity, presenting a pioneering avenue for fine-tuning material properties. In summary, this research not only identifies promising TEBC materials with superior thermal properties, but also introduces a valuable computational material design methodology for the rapid discovery of complex materials for harsh environments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermal mean-field theories

Several closely related ab initio thermal mean-field theories for fermions, both well-established and new ones, are compared with one another at the formalism level and numerically. The theories considered are Fermi–Dirac theory; thermal Hartree–Fock (HF) theory; two modifications of the thermal single-determinant and the first-order finite-temperature many-body perturbation theory based on a zero-temperature or thermal HF reference. Furthermore, thermal full-configuration-interaction theory is used as the benchmark.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Gauge-fixing quantum density operators at scale

We provide a theory, algorithms, and simulations of nonequilibrium quantum systems using a one-dimensional (1D) completely positive (CP), matrix-product (MP) density-operator (𝜌) representation. By generalizing the matrix product state's orthogonality center, to additionally store positive classical mixture correlations, the MP⁢𝜌 factorization naturally emerges. In this setting, we analytically and numerically examine the virtual gauge freedoms associated with the representation of quantum density operators. Based on this perspective, we simplify algorithms in certain limits to speed up the integration of the canonical-form master-equation dynamics. This enables us to quickly evolve under the dynamics of two-body quantum channels without resorting to optimization-based methods. In addition to this technical advance, we also scale up numerical examples and discuss implications for accurately modeling hardware architectures and predicting their performance in the near term. This includes an example of the quantum to classical transition of informationally leaky, i.e., decohering, qubits. In this setting, because of loss from environmental interactions, nonlocal complex coherence correlations are converted into global incoherent classical statistical mixture correlations. Lastly, the representation of both global and local correlations is discussed. We expect this work to have applications in additional nonequilibrium settings, beyond qubit engineering.

Gangapuram, Amit Jamadagni [Oak Ridge National Lab↗
DOE OSTI2025

Size-dependent attraction of Cu solutes to clusters formed at Ag grain boundaries

We report a size-dependent solute clustering mechanism at grain boundaries in a sputtered ultrafine-grained Ag-Cu alloy, where large Cu clusters form despite weak individual solute-solute interactions. X-ray diffraction confirms limited Cu solubility in the Ag matrix, while scanning transmission electron microscopy reveals Cu clustering at both ordinary GBs and GB junctions. Density functional theory calculations show that 12-atom Cu clusters are energetically preferred, while smaller three-atom clusters are significantly less stable. Additional calculations demonstrate a marked increase in solute-cluster attraction energy with cluster size. As a result, these findings point to a previously unrecognized pathway for grain-boundary solute clustering in immiscible systems, driven by collective solute-cluster interactions, with implications for segregation behavior and stability in nanocrystalline and ultrafine-grained alloys.

Alloys↗
DOE OSTI2025

Ab Initio Design of High-Entropy Thermal/ Environmental Barrier Coatings

Next generation thermal/environmental barrier coatings (TEBC) require carefully balancing various properties including phase stability, thermal conductivity, coefficient of thermal expansion (CTE), mechanical properties, and resistance against hot corrosion and water vapor recession. This work mainly focuses on rapid design of cost-effective high entropy rare-earth disilicates and aluminum garnets to protect SiC-based ceramic matrix composites and nickel-based superalloys in the hot section of gas turbine engines using density functional theory methods. Our calculations identify several low-cost high entropy TEBC exhibiting ultralow thermal conductivity at 1500 K and desirable CTE while maintaining good mechanical properties, including Er1/2Y3/4Yb3/4Si2O7, Gd1/4Er1/4Y3/4Yb3/4Si2O7, Eu1/4Er1/4Y3/4Yb3/4Si2O7, and (Y1/4Gd1/4Er1/4Yb1/4)3Al5O12. This work also aims to gain fundamental understanding of oxygen diffusion in model disilicates. Minimizing oxidizer (such as water vapor and oxygen) permeability through the EBC layer can significantly decrease the growth rate of thermally grown oxide and extend the service life of the coating system. Oxygen diffusion mechanisms including formation energy of defects under varying oxygen conditions and defect migration energy barriers will be presented.

coefficient of thermal expansion↗
NASA NTRS1978

The coupled states approximation for scattering of two diatoms

The paper presents a detailed development of the coupled-states approximation for the general case of two colliding diatomic molecules. The high-energy limit of the exact Lippman-Schwinger equation is applied, and the analysis follows the Shimoni and Kouri (1977) treatment of atom-diatom collisions where the coupled rotor angular momentum and projection replace the single diatom angular momentum and projection. Parallels to the expression for the differential scattering amplitude, the opacity function, and the nondiagonality of the T matrix are reported. Symmetrized expressions and symmetrized coupled equations are derived. The present correctly labeled coupled-states theory is tested by comparing its calculated results with other computed results for three cases: H2-H2 collisions, ortho-para H2-H2 scattering, and H2-HCl.

Heil, T. G.↗
NASA NTRS1981

The dynamics and control of large flexible space structures-IV

The effects of solar radiation pressure as the main environmental disturbance torque were incorporated into the model of the rigid orbiting shallow shell and computer simulation results indicate that within the linear range the rigid modal amplitudes are excited in proportion to the area to mass ratio. The effect of higher order terms in the gravity-gradient torque expressions previously neglected was evaluated and found to be negligible for the size structures under consideration. A graph theory approach was employed for calculating the eigenvalues of a large flexible system by reducing the system (stiffness) matrix to lower ordered submatrices. The related reachability matrix and term rank concepts are used to verify controllability and can be more effective than the alternate numerical rank tests. Control laws were developed for the shape and orientation control of the orbiting flexible shallow shell and numerical results presented.

Bainum, P. M.↗
NASA NTRS1982

Calculation of exact vibration modes for plane grillages by the dynamic stiffness method

A dynamic stiffness method is developed for the calculation of the exact modal parameters for plane grillages which consist of straight and uniform beams with coincident elastic and inertial axes. Elementary bending-torsion beam theory is utilized, and bending translation is restricted to one direction. The exact bending-torsion dynamic stiffness matrix is obtained for a straight and uniform beam element with coincident elastic and inertial axes. The element stiffness matrices are assembled using the standard procedure of the static stiffness method to form the dynamic stiffness matrix of the complete grillage. The exact natural frequencies, mode shapes, and generalized masses of the grillage are then calculated by solving a nonlinear eigenvalue problem based on the dynamic stiffness matrix. The exact modal solutions for an example grillage are calculated and compared with the approximate solutions obtained by using the finite element method.

Hallauer, W. L., Jr.↗
NASA NTRS1983

Geometry of spinor regularization

The Kustaanheimo theory of spinor regularization is given a new formulation in terms of geometric algebra. The Kustaanheimo-Stiefel matrix and its subsidiary condition are put in a spinor form directly related to the geometry of the orbit in physical space. A physically significant alternative to the KS subsidiary condition is discussed. Derivations are carried out without using coordinates.

Hestenes, D.↗
NASA NTRS1986

Electromagnetic scattering from a class of open-ended waveguide discontinuities

A relatively simple high frequency analysis of electromagnetic scattering from a class of open-ended waveguide discontinuites was developed. The waveguides are composed of perfectly-conducting sections in which the electromagnetic field can be written as the sum of waveguide modes. Junctions are formed at the open end and also within interior regions where different sections are joined. The reflection and transmission properties of each junction are described in terms of a scattering matrix which is determined by combining the modal ray picture with high frequency techniques such as the Geometrical Theory of Diffraction (GTD), the Equivalent Current Method (ECM), and modifications of the Physical Theory of Diffraction (PTD). A new set of equivalent circuits are employed in this ECM analysis which leads to a simple treatment of many types of junction discontinuities. Also, a new procedure is presented to improve the efficiency of the aperture integration at the open end which is required in the PTD procedure for finding the fields radiated from (or coupled to) the open end. Once the scattering matrices are determined, they are then combined using a self-consistent multiple scattering method to obtain the total scattered fields.

Altintas, A.↗
NASA NTRS1986

Some insights into the stability of difference approximations for hyperbolic initial-boundary-value problems

This paper states a conjecture which relates Lax-Richmyer stability to the algebraic test of the stability theory of Gustafsson, Kreiss, and Sundstrom (1972), developed for difference approximations to initial boundary value problems where the matrix size J increases linearly with n as n goes to infinity. This corresponds to mesh refinement in both space and time for t = n x delta t = constant.

Warming, Robert F.↗
NASA NTRS1988

Active control of transient rotordynamic vibration by optimal control methods

Although considerable effort has been put into the study of steady state vibration control, there are few methods applicable to transient vibration control of rotorbearing systems. In this paper optimal control theory has been adopted to minimize rotor vibration due to sudden imbalance, e.g., blade loss. The system gain matrix is obtained by choosing the weighting matrices and solving the Riccati equation. Control forces are applied to the system via a feedback loop. A seven mass rotor system is simulated for illustration. A relationship between the number of sensors and the number of modes used in the optimal control model is investigated. Comparisons of responses are made for various configurations of modes, sensors, and actuators. Furthermore, spillover effect is examined by comparing results from collocated and noncollocated sensor configurations. Results show that shaft vibration is significantly attenuated in the closed loop system.

Palazzolo, A. B.↗
NASA NTRS2001

Free Vibration of Uncertain Unsymmetrically Laminated Beams

Monte Carlo Simulation and Stochastic FEA are used to predict randomness in the free vibration response of thin unsymmetrically laminated beams. For the present study, it is assumed that randomness in the response is only caused by uncertainties in the ply orientations. The ply orientations may become random or uncertain during the manufacturing process. A new 16-dof beam element, based on the first-order shear deformation beam theory, is used to study the stochastic nature of the natural frequencies. Using variational principles, the element stiffness matrix and mass matrix are obtained through analytical integration. Using a random sequence a large data set is generated, containing possible random ply-orientations. This data is assumed to be symmetric. The stochastic-based finite element model for free vibrations predicts the relation between the randomness in fundamental natural frequencies and the randomness in ply-orientation. The sensitivity derivatives are calculated numerically through an exact formulation. The squared fundamental natural frequencies are expressed in terms of deterministic and probabilistic quantities, allowing to determine how sensitive they are to variations in ply angles. The predicted mean-valued fundamental natural frequency squared and the variance of the present model are in good agreement with Monte Carlo Simulation. Results, also, show that variations between plus or minus 5 degrees in ply-angles can affect free vibration response of unsymmetrically and symmetrically laminated beams.

Kapania, Rakesh K.↗
DOE OSTI2025

Evidence for triaxial shape coexistence in 74 Ge

The deformation properties of the low-lying states in 74 Ge have been investigated using multistep Coulomb excitation. The measurements were carried out with the advanced 𝛾-ray tracking array, GRETINA, and the CHICO2 particle detector. A comprehensive set of 𝐸⁢2 transition and diagonal matrix elements was deduced following an analysis with the semiclassical coupled-channels code GOSIA. The data were compared with results of calculations carried out within the framework of the generalized triaxial rotor model as well as with the configuration interaction shell model and the symmetric rotor model. Results from calculations with covariant density functional theory were used to construct a five-dimensional collective Hamiltonian for further comparisons with the data. Collectively, the calculations provide an accurate reproduction of the experimental matrix elements and further support an understanding in terms of the coexistence of two axially asymmetric shapes. In conclusion, this leads to an overall interpretation of the underlying structure of 74 Ge requiring triaxiality, as is also the case in the neighboring even-mass Ge isotopes.

59 ≤ A ≤ 89↗