Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “loss factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Vitrification of High-Cr Glass in Research-Scale Melter

This test report describes the experimental results from a small-scale test using the research-scale melter (RSM) at Pacific Northwest National Laboratory to demonstrate processing of a high-Cr simulated feed stream, designated HLW-HCr-16. The RSM is a small, joule-heated melter capable of processing melter feed continuously. The melter is equipped with Inconel ® 693 electrodes, Monofrax ® K-3 refractory, and an Inconel 690 pour spout. An electric kiln surrounds the melter body and minimizes heat loss from the melter body during operation. The RSM is equipped with an offgas treatment system that employs quenching, wet scrubbing, and high-efficiency mist elimination. The glass-discharge section is heated to facilitate pouring of the glass. The melter is fitted with a melt cavity that is ~25 cm (10 in.) in diameter with a nominal glass depth of 8.9 cm (3.5 in.). The melter was operated with a target glass temperature of 1150°C and target plenum temperature between 550°C and 700°C for this test. The air bubbling rate was 4.2 L/min. Overall, during the continuous operation of the melter for ~ 103 hours, ~ 141 kg of glass was produced. At the conclusion of the test, the melter and exhaust lines were visually inspected for particulate deposition and corrosion. Entrained material had adhered to the underside of the melter lid and to the exhaust piping. Enrichments in elements such as Cl, F, B, K, Li, P, Na, and S were measured in these deposits through inductively coupled plasma–optical emission spectroscopy and X-ray fluorescence analysis. When the melter electrodes and air bubbler tube were removed from the glass in the RSM, the electrodes appeared discolored, but no significant loss of metal was observed. The processing of a high-Cr simulant, HLW-HCr-16, in the RSM produced glass at an average rate of 1.36 kg/h, equaling a melter-surface-area normalized glass generation rate of 654 kg/day/m 2 . The resulting glass met the toxicity characteristic leaching procedure requirement. Test results of crystallinity, electrical conductivity, and viscosity showed good processing properties of this high-Cr high-level waste glass. RSM offgas was also sampled and analyzed at periodic intervals during steady-state operating conditions. The total decontamination factor averaged by four sampling periods was 134. The concentrations of CO and NO x in emissions were 237 to 422 and 69 to 94 parts per million by volume, respectively.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Soybean fallow and nitrification inhibitors: Strategies to reduce N 2 O emission intensities and N losses in Australian sugarcane cropping systems

The Australian sugar industry is facing mounting pressure to reduce the nitrogen (N) losses and nitrous oxide (N 2 O) emissions associated with N fertiliser use. Research has shown that N 2 O emissions from sugarcane (Saccharum officinarum L.) cropping systems can be reduced with the use of fertilisers coated with nitrification inhibitors, or by sowing legume crops in the fallows between sugarcane crop cycles. However, the efficacy of these two N management strategies across different climatic zones is still unclear, as results from field studies have been contradictory. The objectives of this study were therefore to use the DayCent model to assess the long-term effects of the two strategies (separately or in combination) on N 2 O emissions, N losses and yields. The model was parameterised using data from eight field experiments (39 treatments) conducted across four of the five main districts of the Australian sugarcane industry. A series of long-term scenarios embracing a range of N fertiliser rates (0- 160 kg N ha -1 applied as urea), climatic regions (Tropics and Subtropics), soil textures (fine- and coarse-textured soils) and N-loss risk scenarios (crop fertilised well before or close to the on-set of the wet season) were tested for both N management strategies. Simulations identified that the combined use of soybean (Glycine max L.) fallows and N fertiliser coated with the 3,4-dimethylpyrazole phosphate (DMPP) nitrification inhibitor was the most effective strategy to maintain or even increase current yields while significantly reducing N 2 O and cumulative N (mainly due to nitrate) losses. When used alone, the soybean fallow strategy on average reduced N losses over the entire crop cycle by 29 % compared with current industry best practice. However, this strategy showed a limited capacity to reduce N 2 O emissions over the entire cane crop cycle (median: -3% compared with current industry best practice), or even increased them in scenarios at high-risk of N losses in the Tropics. The use of urea coated with DMPP alone allowed current fertiliser N rates to be reduced by 30 % without any substantial yield penalty. In environments prone to high N losses, DMPP urea abated overall N losses and N 2 O emissions by 41 % and 30 %, respectively. This was the first study to use such an extensive dataset to parameterise a biogeochemical model for yields, N 2 O emissions and N losses in sugarcane cropping systems. Finally, the findings will be instrumental in guiding future research and policies designed to improve the profitability and environmental sustainability of this industry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Electrokinetic Analysis of Poorly Conductive Electrocatalytic Materials

While many factors can influence the activity of the electrochemical interface at atomic and molecular levels, the electron and ion transport have a big impact on the overall electrochemical performance. Here, we investigate how electrical resistance (conductivity) of the electrode affects the measured electrocatalytic activity using the hydrogen evolution reaction as a model reaction. We clearly demonstrate the effect of the poor electronic conductivity of MoS 2 on the electrochemical performance, as both values of the exchange current density as well as the Tafel slope depend on the level of utilization of the active material and the ohmic losses. A quantitative analysis using the composite electrode model is provided, showing the importance of the experimental conditions and good control of electrode/electrolyte system for the proper evaluation and comparison of electrocatalysts’ kinetic parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mitigating coherent loss in superconducting circuits using molecular self-assembled monolayers

In planar superconducting circuits, decoherence due to materials imperfections, especially two-level-system (TLS) defects at different interfaces, is a primary hurdle for advancing quantum computing and sensing applications. Traditional methods for mitigating TLS loss, such as etching oxide layers at metal and substrate interfaces, have proven to be inadequate due to the persistent challenge of oxide regrowth. In this work, we introduce a novel approach that employs molecular self-assembled monolayers (SAMs) to chemically bind at different interfaces of superconducting circuits. This technique is specifically tested here on coplanar waveguide (CPW) resonators, in which this method not only impedes oxide regrowth after surface etching but can also tailors the dielectric properties at different resonators interfaces. The deployment of SAMs results in a consistent improvement in the measured quality factors across multiple resonators, surpassing those with only oxide-etched resonators. The efficiency of our approach is supported by microwave measurements of multiple devices conducted at millikelvin temperatures and correlated with detailed X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) characterizations of SAM-passivated resonators. The compatibility of SAMs materials with the established fabrication techniques offers a promising route to improve the performance of superconducting quantum devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Recent progress in in-situ visualization of electrochemical reactions in electrochemical energy devices

A growing body of evidence indicates that bubble dynamics are crucial performance-limiting factors on electrochemical reactions and energy conversion efficiencies in both half-cell and full cell device levels. This review aims to summarize the recent progress in in-situ visualization characterizations of electrochemical reactions and reactant/product transport in electrochemical energy systems. The latest achievements of various new electrodes, transparent cell designs, and development for simultaneous visualization of reactions at both electrodes and electrolyte/electrode interface are highlighted. The new insights into the influence of bubbles on reaction sites and associated electrochemical performances are discussed. Lastly, some perspectives on potential strategies for mitigating the bubble-induced energy losses are proposed for future research directions and opportunities in water electrolysis and other electrochemical energy systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Doping with phosphorus reduces anion vacancy disorder in CdSeTe semiconductors enabling higher solar cell efficiency

Doping is used in many pn junction devices, such as polycrystalline solar cells, to increase the strength of the junction field to assist charge carrier collection and thus partially mitigate nonradiative recombination losses. We demonstrate a different doping characteristic for inorganic solar cells: using dopants to reduce charge carrier trapping and electronic band tails. Alloying CdTe with Se to form CdSeTe semiconductor reduced recombination, but CdSeTe has more complex defect states which can limit further efficiency gains due to charge carrier trapping and trap-limited mobility. Doping CdSeTe with P (but not N, As, or Sb in this study) reduces band tails (Urbach energies) and lessens the impact of the near valence band trap states, with ambipolar mobilities improving to >50 cm 2 V −1 s −1 , fill factor increasing from 76% to 79%, and efficiencies increasing by 0.9% absolute. Simulations are used to show how such defect reduction improves performance in the radiative limit.

14 SOLAR ENERGY↗
DOE OSTI2022

Defect engineering in wide-bandgap perovskites for efficient perovskite–silicon tandem solar cells

Wide-bandgap (WBG) mixed-halide perovskites show promise of realizing efficient tandem solar cells but at present suffer from large open-circuit voltage loss and the mechanism is still unclear. Here we show that WBG perovskites with iodide–bromide compositions have an increased concentration of deep traps induced by iodide interstitials, which limits performance of WBG perovskite cells. We employ tribromide ions to suppress the iodide interstitial formation and thus reduce charge recombination in bladed WBG perovskite films of Cs 0.1 FA 0.2 MA 0.7 Pb(I 0.85 Br 0.15 )3. The 1-µm-thick opaque WBG perovskite solar cells have an efficiency of 21.9%, a small open-circuit voltage deficit of 0.40 V and a large fill factor of 83%. The efficiency of the best-performing monolithic perovskite–silicon tandem cell using this perovskite reaches 28.6%. Furthermore, the tribromide addition also suppresses light-induced phase segregation in WBG perovskites and thus enhance device stability. Encapsulated tandem cells maintain 93% of their initial efficiency after operation for 550 h.

14 SOLAR ENERGY↗
DOE OSTI2024

Mechanism of anion exchange and small-molecule inhibition of pendrin

Pendrin (SLC26A4) is an anion exchanger that mediates bicarbonate (HCO 3 - ) exchange for chloride (Cl-) and is crucial for maintaining pH and salt homeostasis in the kidney, lung, and cochlea. Pendrin also exports iodide (I - ) in the thyroid gland. Pendrin mutations in humans lead to Pendred syndrome, causing hearing loss and goiter. Inhibition of pendrin is a validated approach for attenuating airway hyperresponsiveness in asthma and for treating hypertension. However, the mechanism of anion exchange and its inhibition by drugs remains poorly understood. We applied cryo-electron microscopy to determine structures of pendrin from Sus scrofa in the presence of either Cl - , I - , HCO 3 - or in the apo-state. The structures reveal two anion-binding sites in each protomer, and functional analyses show both sites are involved in anion exchange. The structures also show interactions between the Sulfate Transporter and Anti-Sigma factor antagonist (STAS) and transmembrane domains, and mutational studies suggest a regulatory role. We also determine the structure of pendrin in a complex with niflumic acid (NFA), which uncovers a mechanism of inhibition by competing with anion binding and impeding the structural changes necessary for anion exchange. These results reveal directions for understanding the mechanisms of anion selectivity and exchange and their regulations by the STAS domain. This work also establishes a foundation for analyzing the pathophysiology of mutations associated with Pendred syndrome.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

On the stability and stationarity of the Super H-mode combined with an ion transport barrier in the core

The Super H-mode, a regime with high pedestal pressure and stored energy, is explored on DIII-D and combined with an ion transport barrier in the plasma core to increase performance. A significant improvement of ion temperatures and confinement is facilitated by favorable conditions such as high rotational shear and high ion pedestal temperatures. As a result of a rise in density and simultaneous decrease in rotation, the ion transport barrier disappears during the discharge evolution, leading to a transition from a very high confinement state at early times, to a reduced but still high confinement phase. Additionally, in many discharges, a global MHD event consistent with the coupling of a destabilized internal mode to an edge localized mode (ELM) causes a large energy loss and leads to a reorganization of the plasma into a lower temperature, higher density state. Depending on the magnitude of the global MHD event, the plasma edge collisionality can increase significantly and shift the operational boundary from the peeling to the ballooning side, which can be understood as a drop out of the Super H-mode channel into standard H-mode. Hence, in Super H-mode discharges with ion transport barriers, both the improved pedestal height and rotational shear contribute to the high stored energy. Here, at very low levels of rotation, the confinement factor for SH modes is still expected to exceed standard H-mode by 20-30 %. With their overall stationarity and high-performance levels, Super H-mode discharges provide an attractive regime for ITER and may enable a more compact design of future fusion power plants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Experimental results of embedded phase change material capsules for increasing the performance of a wrapped heat pump water heater

Herein, to enhance the capacity of heat pump water heaters (HPWHs), high energy density phase change material (PCM) was used in two experimentally tested HPWH prototypes. Preliminary findings showed that in the PCM, stored thermal potential energy could be effectively converted into sensible heat in the water over a slight temperature difference, with the goal of increasing the capacity of hot water above a desired cut-off temperature. This exchange of energy results in an increased amount of hot water necessary for mixing at the location utilized by the consumer. It was also found that for a wrapped HPWH, there was an average increase of 27.7% in the capacity when 7.6 L of novel PCM filled spherical capsules were added to a 22.7 L tank downstream of the HPWH. In the second design (Beta), PCM capsules were immersed into the tank with a cylindrical geometry, and the UEF was increased by 5.5% over the baseline HPWH test result. As for the Beta design, heat loss was reduced significantly compared to a typical HPWH and the Alpha design. Food-grade PCMs were selected as appropriate. The novel encapsulation design increased the effective conductivity inside the capsule by adding metal fins.

42 ENGINEERING↗
DOE OSTI2021

422 Million intrinsic quality factor planar integrated all-waveguide resonator with sub-MHz linewidth

High quality-factor (Q) optical resonators are a key component for ultra-narrow linewidth lasers, frequency stabilization, precision spectroscopy and quantum applications. Integration in a photonic waveguide platform is key to reducing cost, size, power and sensitivity to environmental disturbances. However, to date, the Q of all-waveguide resonators has been relegated to below 260 Million. Here, we report a Si 3 N 4 resonator with 422 Million intrinsic and 3.4 Billion absorption-limited Qs. The resonator has 453 kHz intrinsic, 906 kHz loaded, and 57 kHz absorption-limited linewidths and the corresponding 0.060 dB m -1 loss is the lowest reported to date for waveguides with deposited oxide upper cladding. These results are achieved through a careful reduction of scattering and absorption losses that we simulate, quantify and correlate to measurements. This advancement in waveguide resonator technology paves the way to all-waveguide Billion Q cavities for applications including nonlinear optics, atomic clocks, quantum photonics and high-capacity fiber communications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Systematic study of nuclear effects in p + Al , p + Au , d + Au , and He 3 + Au collisions at s N N = 200 GeV using π 0 production

The PHENIX Collaboration presents a systematic study of inclusive π 0 production from p + p , p + Al , p + Au , d + Au , and He 3 + Au collisions at s N N = 200 GeV . Measurements were performed with different centrality selections as well as the total inelastic, 0–100%, selection for all collision systems. For 0–100% collisions, the nuclear-modification factors, R x A , are consistent with unity for p T above 8 GeV / c , but exhibit an enhancement in peripheral collisions and a suppression in central collisions. The enhancement and suppression characteristics are similar for all systems for the same centrality class. It is shown that for high- p T - π 0 production, the nucleons in the d and He 3 interact mostly independently with the Au nucleus and that the counterintuitive centrality dependence is likely due to a physical correlation between multiplicity and the presence of a hard scattering process. These observations disfavor models where parton energy loss has a significant contribution to nuclear modifications in small systems. Nuclear modifications at lower p T resemble the Cronin effect—an increase followed by a peak in central or inelastic collisions and a plateau in peripheral collisions. The peak height has a characteristic ordering by system size as p + Au > d + Au > He 3 + Au > p + Al . For collisions with Au ions, current calculations based on initial-state cold nuclear matter effects result in the opposite order, suggesting the presence of other contributions to nuclear modifications, in particular at lower p T .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

A User Guide to PARET/ANL

PARET was originally created in 1969 at what is now Idaho National Laboratory (INL), to analyze reactivity insertion events in research and test reactor cores cooled by light or heavy water, with fuel composed of either plates or pins. The use of PARET is also appropriate for fuel assemblies with curved fuel plates when their radii of curvatures are large with respect to the fuel plate thickness. The PARET/ANL version of the code has been developed at Argonne National Laboratory (ANL) under the sponsorship of the U.S. Department of Energy/NNSA since the inception of the Reactor Conversion Program. Since Reduced Enrichment for Research and Test Reactors (RERTR) began in 1978, PARET/ANL has been benchmarked to experimental data including SPERT testing, and used to determine the expected transient behavior of a large number of reactors regardless of enrichment both inside and outside the Reactor Conversion Program. This document provides the pertinent information for the use of PARET/ANL Version 7.6. PARET/ANL models the various fueled regions of a reactor core as channels. Each of these channels consists of a single flat fuel plate/pin (including cladding and, optionally, a gap) with water coolant on each side. In slab geometry the coolant channels for a given fuel plate are of identical dimensions (mirror symmetry), but they can be of different thickness in each channel. There can be many channels, but each channel is independent and coupled only through reactivity feedback effects to the whole core. The time-dependent differential equations that represent the system are replaced by an equivalent set of finite-difference equations in space and time, which are integrated numerically. PARET/ANL uses fundamentally the same numerical scheme as RELAP5 for the time-integration of the point-kinetics equations. The one-dimensional thermal-hydraulic model includes temperature-dependent thermal properties of the solid materials, such as heat capacity and thermal conductivity, as well as the transient heat production and heat transfer from the fuel meat to the coolant. Temperature- and pressure-dependent thermal properties of the coolant such as enthalpy, density, thermal conductivity, and viscosity are also used in determining parameters such as friction factors and heat transfer coefficients. The code first determines the steady-state solution for the initial state. Then the solution of the transient is obtained by integration in time and space. Multiple heat transfer, DNB and flow instability correlations are available. The code was originally developed to model reactors cooled by an open loop, which was adequate for rapid transients in pool-type cores. An external loop model appropriate for Miniature Neutron Source Reactors (MNSR’s) was also added to PARET/ANL to model natural circulation within the vessel, heat transfer from the vessel to pool and heat loss by evaporation from the pool. PARET/ANL also contains models for decay heat after shutdown, control rod reactivity versus time or position, time-dependent pump flow, and loss-of-flow event with flow reversal as well as logic for trips on period, power, and flow. Feedback reactivity effects from coolant density changes and temperature changes are represented by tables. Feedback reactivity from fuel heat-up (Doppler Effect) is represented by a four-term polynomial in powers of fuel temperature. Photo-neutrons produced in beryllium or in heavy water may be included in the point-kinetics equations by using additional delayed neutron groups.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Ultimate Bifacial Showdown: 75kW Field Results

This work presents one year results for a side-by-side comparison of 5 different bifacial technologies, deployed in a 75-kW single-axis tracked field at Golden, CO. Four PERC (multi and mono) and 1 Silicon Heterojunction manufacturers are represented. Reference strings of equivalent monofacial PV modules are also installed for a direct technology comparison and calculation of bifacial gain. Analysis indicates performance within expectation, with a cumulative model mean error within +/- 2% for both bifacial and monofacial models and cumulative bifacial energy gain between 6-9%. High accuracy string-level DC monitoring and module-level measurements are also presented, showing effects of snow and edge effects in the order of +/- 3% for non-uniform irradiance across the row. Data from a custom-module to measure shading loss from the torque-tube is installed, showing up to 6% irradiance non-uniformity for the month of January.

bifacial field validation↗
DOE OSTI2025

Identifying environmentally induced calibration changes in cryogenic RF axion detector systems using deep neural networks

The axion is a compelling hypothetical particle that could account for the dark matter in our universe while simultaneously solving the strong CP problem in quantum chromodynamics. The most sensitive axion detection technique demonstrated so far makes use of a high Q cavity immersed in a strong magnetic field, where axions are converted to microwave photons. This is called an axion haloscope and has primarily targeted the 1–10 GHz range. As searches scan up in axion mass, toward the parameter space favored by theoretical predictions, individual cavity sizes decrease in order to achieve higher frequencies. This shrinking cavity volume translates directly to a loss in signal-to-noise, motivating the plan to replace individual cavity detectors with arrays of cavities. When the transition from one to (N) multiple cavities occurs, haloscope searches are anticipated to become much more complicated to operate, requiring N times as many measurements but also the new requirement that N detectors operate in unison, which can be achieved by locking them to a common frequency. To offset this anticipated increase in detector complexity, we aim to develop new tools for diagnosing experiments using neural networks. Current experiments monitor scattering parameters of their receiver for periodically measuring cavity quality factor and coupling. However, off-resonant data remain relatively useless. In this paper, we ask if it is possible that off-resonant information contained in vector network analyzer scans could be used to diagnose equipment failures/anomalies and measure physical conditions (e.g., temperatures and ambient magnetic field). We demonstrate a proof-of-concept that AI techniques can help manage the complexity of an axion haloscope search for operators.

Engel, Andrew W. [Pacific Northwest National Labor↗
DOE OSTI2020

Advanced Non-Tread Materials for Fuel-Efficient Tires

PPG Industries, Inc. proposes to develop a new silica filler that can increase fuel efficiency by 2% while maximizing key performance properties in non-tread tire components compared to current carbon black/silica filler blends. In this project PPG focused on a sidewall compound. The developed compounds/components will reduce energy losses by approximately 25%, with no more than a 5% loss of resistance to degradative forces (targeting better performance). PPG plans to achieve this goal by characterizing the impact the silica filler can have on rubber properties and then tuning the silica morphology and surface chemistry for this end use. PPG will also provide guidance in optimizing the compound formulation to make the best use of this new filler. A key aspect is to understand and maintain, if not improve, the aging performance as evaluated by crack growth resistance under ozone environment. Two key strategies were used to meet the rolling resistance goal while maintaining other performance properties. The first factor was understanding the surface treatments and chemical makeup of the silica and its effects on compound performance. The second factor was using the best performing silicas and determining the optimum compound modifications to achieve the final sidewall compound performance. Using statistical analysis throughout the optimization process, it was determined that changing the silica morphology played a role in improving the reduction of tear strength while reducing rolling resistance and the improvements observed varied depending on the CB type.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Producing cultivated meat cuts that match traditional meat in quality and affordability (CRADA Final Report)

Novel Farms, Inc., as a participant of the Cyclotron Road Lab-Embedded Entrepreneurship Program, investigated the performance of various animal cell lines and animal cell media formulations using its proprietary scaffolds as a growth substratum towards the development of economically-feasible cultivated meat production. As an alternative to conventionally farmed animal meat, cultivated meat production has the potential to yield a marginal carbon footprint while providing sustainable and cruelty-free animal protein. The prohibitively high cost of the growth factors necessary in animal cell culture media constitutes the primary barrier that hinders the economically viable production of cultivated meat products. Furthermore, scaffolding is required to create structured meat products, but current options are unsuitable for cost-effective large-scale production of cultivated meat. Novel Farms has developed a proprietary technology to produce scaffolding that has the potential to reduce production costs while providing an ideal 3D surface for cell growth. Developing cost-efficient methods for cultivated meat production will be vital in satisfying the growing demand for animal protein while avoiding the deforestation, carbon emissions, biodiversity loss and other negative outcomes of industrial animal farming.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Vertical and horizontal gene transfer shaped plant colonization and biomass degradation in the fungal genus Armillaria

The fungal genus Armillaria contains necrotrophic pathogens and some of the largest terrestrial organisms that cause tremendous losses in diverse ecosystems, yet how they evolved pathogenicity in a clade of dominantly non-pathogenic wood degraders remains elusive. Here we show that Armillaria species, in addition to gene duplications and de novo gene origins, acquired at least 1,025 genes via 124 horizontal gene transfer events, primarily from Ascomycota. Horizontal gene transfer might have affected plant biomass degrading and virulence abilities of Armillaria, and provides an explanation for their unusual, soft rot-like wood decay strategy. Furthermore, combined multi-species expression data revealed extensive regulation of horizontally acquired and wood-decay related genes, putative virulence factors and two novel conserved pathogenicity-induced small secreted proteins, which induced necrosis in planta. Overall, this study details how evolution knitted together horizontally and vertically inherited genes in complex adaptive traits of plant biomass degradation and pathogenicity in important fungal pathogens.

60 APPLIED LIFE SCIENCES↗