Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “long term testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Impact of the fluorination degree of ether-based electrolyte solvents on Li-metal battery performance

Electrolytes using fluorinated solvents have proven effective in improving the cycling life of Li-metal batteries, by forming a robust solid–electrolyte interphase through decomposition of anion and fluorinated solvent molecules. Herein, we modulated the fluorination degree of ether-based electrolyte solvents to investigate their performance in Li-metal batteries. Here, we tuned the fluorination degree by installing a monofluoro substituent on one ethoxy group of 1,2-diethoxyethane (DEE) and varying the fluorination degree on the other one, providing three fluorinated DEE solvent molecules (i.e., F1F0, F1F1 and F1F2) with a relatively low fluorination degree. All three electrolytes showed improved solvation strength and ionic conductivities compared with previous highly fluorinated DEE electrolytes while retaining good oxidative stability. A full cell test using the Li-metal anode and nickel-rich cathode revealed that a higher degree of fluorination is beneficial to the cycling performance, and the cycling stability follows F1F0 < F1F1 < F1F2. Specifically, F1F0 exhibited poor cycling stability due to its instability against both the anode and cathode. While F1F1 and F1F2 both showed good stability against the Li metal anode, their relative long-term oxidative stability was responsible for the distinct performance, in which the cycle numbers at 80% capacity retention for F1F1 and F1F2 were ~20 and ~80, respectively. Finally, we demonstrated that F1F2 was able to achieve 90 cycles before reaching 80% capacity retention in practical lithium iron phosphate (LFP) pouch cells. This work shows the importance of modulating the fluorination degree of electrolyte solvents, and this approach is suitable for various cathode materials.

25 ENERGY STORAGE↗

Evaluation of Degradation Mechanisms for Solid Secondary Waste Grout Waste Forms

The overall objective of this work is to provide defensibility for the long-term performance of grouted Hanford SSW streams when disposed in a near surface disposal facility, IDF, on the Hanford Site. Providing defensibly for the long-term performance of the grouted waste forms is consistent with the research and development activities identified in the Performance Assessment Maintenance Plan, (Westcott et al. 2019), that are necessary to address the assumptions made in the PA. Specifically, this work addresses two areas identified for further research and development activities in the plan: (1) “Evaluate ongoing research on transport characteristics of cementitious materials using accelerated tests to approximate the effects of aging/alteration/weathering”; and (2) “Evaluate ongoing research on microbial effects on transport processes in cementitious materials.” The assembled subject matter expert team evaluated a list of degradation mechanisms and supporting processes and provided rankings of areas where further research and development (R&D) are needed. From this assessment, high priority R&D areas include: (1) the effects of carbonation, Ca leaching, and SSW dimensional change in grout waste forms; (2) updated model representations of grouted waste forms; and (3) scaled testing demonstrations. Moderate priority items including a paper study on possible microbial influence, reoxidation rates, radionuclide/contaminant dissolution from SSW in the grout and freeze thaw behavior. Other processes evaluated were either deemed unlikely to occur, to have little impact on the SSW waste forms, or to occur at time frames beyond those considered (>10,000 years). The assessments and proposed R&D approaches are expected to support an update to the WRPS SSW roadmap.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluating switch lifetime in soft-switched single-stage differential-mode SST

The reliability of semiconductor switches in single-stage differential-mode solid-state transformers (DM-SSTs) has not been systematically evaluated under soft-switching operation and realistic grid conditions. This paper presents a switch-level reliability analysis for soft-switched and hard-switched DM-SST configurations by integrating converter-specific power loss modeling with empirical lifetime prediction. Analytical derivation of device current profiles specific to the DM-SST is used to characterize electrothermal stress, which is then mapped to lifetime using degradation models obtained from power cycling tests (PCTs). Applied to realistic SST load profiles and grid voltage variations, this approach provides a probabilistic prediction of switch lifetime for the DM-SST. Lifetime estimates for both SiC MOSFETs and Si IGBTs are presented, offering insight into device degradation under converter operating conditions. The results quantify the reliability benefits of soft switching in single-stage SSTs, highlighting how switching dynamics influence long-term switch degradation.

14 SOLAR ENERGY↗

Environmental stability impacts the differential sensitivity of marine microbiomes to increases in temperature and acidity

Ambient conditions shape microbiome responses to both short- and long-duration environment changes through processes including physiological acclimation, compositional shifts, and evolution. Here, we predict that microbial communities inhabiting locations with larger diel, episodic, and annual variability in temperature and pH should be less sensitive to shifts in these climate-change factors. To test this hypothesis, we compared responses of surface ocean microbes from more variable (nearshore) and more constant (offshore) sites to short-term factorial warming (+3 °C) and/or acidification (pH –0.3). In all cases, warming alone significantly altered microbial community composition, while acidification had a minor influence. Compared with nearshore microbes, warmed offshore microbiomes exhibited larger changes in community composition, phylotype abundances, respiration rates, and metatranscriptomes, suggesting increased sensitivity of microbes from the less-variable environment. Moreover, while warming increased respiration rates, offshore metatranscriptomes yielded evidence of thermal stress responses in protein synthesis, heat shock proteins, and regulation. Future oceans with warmer waters may enhance overall metabolic and biogeochemical rates, but they will host altered microbial communities, especially in relatively thermally stable regions of the oceans.

54 ENVIRONMENTAL SCIENCES↗

Temporally-consistent koopman autoencoders for forecasting dynamical systems

Absence of sufficiently high-quality data often poses a key challenge in data-driven modeling of high-dimensional spatio-temporal dynamical systems. Koopman Autoencoders (KAEs) harness the expressivity of deep neural networks (DNNs), the dimension reduction capabilities of autoencoders, and the spectral properties of the Koopman operator to learn a reduced-order feature space with simpler, linear dynamics. However, the effectiveness of KAEs is hindered by limited and noisy training datasets, leading to poor generalizability. To address this, we introduce the Temporally-Consistent Koopman Autoencoder (tcKAE), designed to generate accurate long-term predictions even with limited and noisy training data. This is achieved through a consistency regularization term that enforces prediction coherence across different time steps, thus enhancing the robustness and generalizability of tcKAE over existing models. We provide analytical justification for this approach based on Koopman spectral theory and empirically demonstrate tcKAE’s superior performance over state-of-the-art KAE models across a variety of test cases, including simple pendulum oscillations, kinetic plasma, and fluid flow data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predictive Models of Genetic Redundancy in Arabidopsis thaliana

Abstract Genetic redundancy refers to a situation where an individual with a loss-of-function mutation in one gene (single mutant) does not show an apparent phenotype until one or more paralogs are also knocked out (double/higher-order mutant). Previous studies have identified some characteristics common among redundant gene pairs, but a predictive model of genetic redundancy incorporating a wide variety of features derived from accumulating omics and mutant phenotype data is yet to be established. In addition, the relative importance of these features for genetic redundancy remains largely unclear. Here, we establish machine learning models for predicting whether a gene pair is likely redundant or not in the model plant Arabidopsis thaliana based on six feature categories: functional annotations, evolutionary conservation including duplication patterns and mechanisms, epigenetic marks, protein properties including posttranslational modifications, gene expression, and gene network properties. The definition of redundancy, data transformations, feature subsets, and machine learning algorithms used significantly affected model performance based on holdout, testing phenotype data. Among the most important features in predicting gene pairs as redundant were having a paralog(s) from recent duplication events, annotation as a transcription factor, downregulation during stress conditions, and having similar expression patterns under stress conditions. We also explored the potential reasons underlying mispredictions and limitations of our studies. This genetic redundancy model sheds light on characteristics that may contribute to long-term maintenance of paralogs, and will ultimately allow for more targeted generation of functionally informative double mutants, advancing functional genomic studies.

59 BASIC BIOLOGICAL SCIENCES↗

Summary of Savannah River Site FY23 Salt Waste Qualification Data

The Savannah River National Laboratory (SRNL) analyzed samples from Savannah River Site (SRS) Waste Tanks 41H and 21H to support qualification of Salt Waste Processing Facility (SWPF) Waste Batches 8 and 9 for processing (the FY23 Salt Batch Qualification samples). These Tanks (i.e. 41H and 21H) are blend tanks for feed to SWPF. None of the samples displayed any unusual or unexpected characteristics such as large amounts of solids, floating solids, or unusual color. Characterization of these samples confirmed similar chemical composition and characteristics to previous salt waste batches. The results for Batches 8 and 9 were provided by SRNL to Savannah River Mission Completion (SRMC), the Liquid Waste Operations subcontractor at SRS, as External Sample Results (Laboratory Information Management System (LIMS)) Reports. Additionally, a separate technical memo was issued by SRNL to report re-test data for Batch 8 for Cs-137 for filtered samples only which were run at the request of SWPF. For Batch 9, a set of samples was also analyzed in parallel by the SWPF-Analytical Laboratory (SWPF-AL). The SWPF-AL data is included herein for comparison with the SRNL data where applicable. The analytical results (both rapid, typically 4 weeks, and long term, typically 8 weeks) for Batches 8 and 9 are now summarized and discussed in this technical report.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Measurement of ion transport properties in ion exchange membranes for photoelectrochemical water splitting

Photoelectrochemical (PEC) water-splitting systems have the unique ability to produce renewable hydrogen directly from sunlight, independent of the electrical grid. These systems are therefore appealing technological options for resilient long-term energy storage. Ion selective membranes, such as monopolar and bipolar membranes, are a vital component of PEC water-splitting systems. These membranes allow for ionic conduction between the cathode and anode chambers, separation of products, and improved catalyst environments for reactions. In order to measure key properties and to study the performance of these ion exchange membranes, it is imperative to develop a robust testing protocol that can be used across the field. This paper introduces two standard electrochemical cells designed to directly measure ion transport properties in monopolar and bipolar membranes. The first electrochemical cell uses commercially available Pt disk electrodes to preform electrochemical impedance spectroscopy (EIS) and reliably measure through-plane conductivity of monopolar membranes. The second electrochemical cell uses four-point measurements with Luggin capillaries and a series of membrane configurations to perform current density-voltage and Faradaic efficiency (FE) measurements for water dissociation (WD) reactions on bipolar membranes. The cell designs and techniques laid out below allow for accurate measurement of ion transport parameters in ion exchange membranes, direct comparison of membranes being developed across the field, and in turn, greater advancements in ion exchange membranes and PEC water-splitting systems.

cation exchange membrane↗

Phosphorus budgets of intensively managed row crops at a long–term agroecosystem research site in the upper US Midwest

Phosphorus (P) budgets for cropping systems provide insights for keeping soil P at optimal levels for crops while avoiding excess inputs. We quantified 12 years of P inputs (fertilizer and atmospheric deposition) and outputs (harvest and leaching losses) for replicated maize (Zea mays L.)—soybean (Glycine max L.)—wheat (Triticum aestivum) crop rotations under conventional, no-till, reduced input, and biologically based (organic without compost or manure) management systems at the Kellogg Biological Station LTAR site in southwest Michigan. Conventional, no-till, and reduced input systems were fertilized between 13 and 50 kg P ha –1 depending on year. Soil test phosphorus (STP) was measured at 0- to 25-cm depth every autumn. Leached P was measured as dissolved P in the soil solution sampled beneath the rooting depth and combined with modeled percolation. Fertilization and harvest were the predominant P fluxes in the fertilized systems, whereas only harvest dominated P flux in the unfertilized organic system. Leaching losses were minor terms in the budgets, but leachate concentrations were nevertheless close to the range of concern for downstream eutrophication. Over the 12-year study period, the organic system exhibited a negative P balance (–82.0 kg P ha –1 ), coinciding with suboptimal STP levels, suggesting a need for P supplementation. In contrast, the fertilized systems showed positive P balances (mean: 70.1 kg P ha –1 ) with STP levels well above agronomic optima. Results underscore the importance of tailored P management strategies to sustain crop productivity while mitigating environmental impacts.

60 APPLIED LIFE SCIENCES↗

Deeply Rooted: Evaluating Plant Rooting Depth as a Means for Enhanced Soil Carbon Sequestration (Full Technical Report)

Soils store three times as much carbon (C) as the atmosphere, but are not at capacity, and enhanced soil C storage is considered an essential strategy to mitigate rising atmospheric CO 2 levels. Agricultural soils have experienced substantial C loss in the past century due to poor agricultural practices and erosion. A shift towards deep-rooting crops and low-impact soil management could potentially increase long-term sequestration of C fixed by plants and stored in their root tissues, particularly for crops that have naturally deep root systems (>1 meter). A substantial amount of the CO 2 taken up by plants is allocated to their root systems, and because C deposited in deep soil layers has a longer residence time (up to millennia, in contrast to C deposited in topsoils), C increases at depth may have better long-term C sequestration potential than topsoils. However, the accrual, turnover, and stabilization of C in subsoils is a critical knowledge gap. We investigated a deeply rooted plant, switchgrass (Panicum virgatum), as a means of increasing carbon stocks in marginal and agricultural soils. We hypothesized that deep (>30 cm) SOC stocks would be greater under bioenergy crops relative to stocks under shallow-rooted conventional crop cover. To test this hypothesis, we compared soil depth profiles beneath deeply rooted switchgrass (cultivated for 4-30 years) and paired shallowrooted annual controls. We studied 12 field sites, 3 that were collected in 2018 before the start of the project as part a Department of Energy (DOE) Sustainable Biofuels study, and 9 that we collected in 2019 on a national field sampling campaign across the eastern US. In our publication from the 2018 study, which was written in collaboration with the LLNL Soil Microbiome Scientific Focus Area (SFA), we found that C stocks increased under switchgrass, but that the increases were dependent on soil texture. In the 2019 study, we found that carbon accrual tended to occur most consistently in low C soil in the southern US, which could indicate that perennial grasses may be a viable strategy to increase SOC in marginals soils in this region. We have published two studies from the 2019 sampling campaign thus far, we measured microbial growth parameters that will aid in modeling subsoil carbon cycling, and we found that switchgrass appears to move water upward in the soil profile and could promote drought tolerance, which a phenomenon commonly performed by trees known as ‘hydraulic redistribution;’ our study is the first to show this can occur in deep-rooted grasses. Finally, we published a modeling paper in collaboration with the LLNL Soil Microbiome SFA, where we found that poorly crystalline minerals are abundant and strongly correlated with organic C in geographically limited zones with enhanced weathering rates. Our results will inform technological development in the agricultural carbon sequestration sector as well as future negative emissions policies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Challenges in studying water fluxes within the soil-plant-atmosphere continuum: A tracer-based perspective on pathways to progress

Tracing and quantifying water fluxes in the hydrological cycle is crucial for understanding the current state of ecohydrological systems and their vulnerability to environmental change. Especially the interface between ecosystems and the atmosphere that is strongly mediated by plants is important to meaningfully describe ecohydrological system functioning. Many of the dynamic interactions generated by water fluxes between soil, plant and the atmosphere are not well understood, which is partly due to a lack of interdisciplinary research. This opinion paper reflects the outcome of a discussion among hydrologists, plant ecophysiologists and soil scientists on open questions and new opportunities for collaborative research on the topic "water fluxes in the soil-plant-atmosphere continuum" especially focusing on environmental and artificial tracers. We emphasize the need for a multi-scale experimental approach, where a hypothesis is tested at multiple spatial scales and under diverse environmental conditions to better describe the small-scale processes (i.e., causes) that lead to large-scale patterns of ecosystem functioning (i.e., consequences). Novel in-situ, high-frequency measurement techniques offer the opportunity to sample data at a high spatial and temporal resolution needed to understand the underlying processes. Here we advocate for a combination of long-term natural abundance measurements and event-based approaches. Multiple environmental and artificial tracers, such as stable isotopes, and a suite of experimental and analytical approaches should be combined to complement information gained by different methods. Virtual experiments using process-based models should be used to inform sampling campaigns and field experiments, e.g., to improve experimental designs and to simulate experimental outcomes. On the other hand, experimental data are a pre-requisite to improve our currently incomplete models. Interdisciplinary collaboration will help to overcome research gaps that overlap across different earth system science fields and help to generate a more holistic view of water fluxes between soil, plant and atmosphere in diverse ecosystems.

54 ENVIRONMENTAL SCIENCES↗

A novel inclusion complex of oxybenzone with C -methylresorcin[4]arene deters skin permeation

Oxybenzone (OXB), a very widely used sunscreen ingredient has the potential to block both UVA and UVB but can penetrate through skin. Studies have revealed its presence in the blood and urine of most humans, which may lead to long-term health effects. As the confined cavities of macrocycles can alter the physical and chemical properties of encapsulated guests, in this study, we investigated the formation of host–guest complexes between C-methylresorcin[4]arene and OXB. Combined experimental (NMR spectroscopy, UV/vis absorption, and fluorescence spectroscopy) and theoretical investigation confirmed the formation of a weak host–guest complex that had a 1 : 1 stoichiometry. Furthermore, skin permeation testing revealed that complexation by C-methylresorcin[4]arene significantly reduced the skin permeation of OXB which can potentially limit the harmful effects of this organic sunscreen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sticky roots--implications of widespread, cryptic, viral infection of plants in natural and managed ecosystems for soil carbon processing in the rhizosphere

Plants strongly influence soil properties through rhizodeposition, in which exudates diffuse from roots, additional secretions are actively released, and root cells are sloughed into the soil. This contribution by plants of carbon compounds belowground is at the core of soil health, water holding capacity, and the soil carbon storage that pulls carbon dioxide out of the atmosphere. Once in soil, organic matter can bind with minerals such as iron hydroxides, where it can be protected from microbial attack for millenia, preserving very large terrestrial soil carbon pools. However, those same compounds contributed by roots to soil may also destabilize the long-term protective associations of SOM with minerals, making that soil organic matter (SOM) more vulnerable to microbial attack and decomposition. Plant roots thus influence both the buildup and breakdown of soil carbon pools. DOE’s E3SM Land Model (ELM) includes a representation of soil carbon storage on minerals, but the potential vulnerability of SOM–mineral associations to effects of rhizodeposition is not yet represented in ELM. To begin testing for this effect of rhizodeposition on soil carbon storage and decomposition, we worked to develop a novel approach during this TES Exploratory project DE-SC0019142 – we harnessed the power of plant viral infection. We examined whether plant virus infection can serve as a tool to intensify rhizodeposition at the root surface, and therefore possibly intensify mobilization of SOM from minerals making it visible to our analytical techniques. Viral infection is widespread in terrestrial ecosystems; 25-70% of plants have virus infection, yet the influence of such infection on root traits and terrestrial soil carbon dynamics remains largely unexplored. We used two plant hosts: the annual Avena sativa (oats) and the genetically tractable, model grass Brachypodium distachyon. These grasses were infected with the broad host range virus Barley Yellow Dwarf Virus (BYDV) via aphids (Rhopalosiphum padi). BYDV infects at least 150 grass species in agricultural and natural ecosystems, and in previous experiments, oats infected with BYDV had roots that were very sticky to the touch, strongly suggesting that infection altered rhizodeposition. We developed this new experimental approach mostly in a one virus (Barley Yellow Dwarf Virus)–one plant (Avena sativa) system. (Several effects of infection in a Brachypodium-BYDV system were similar in nature to effects on Avena sativa, but were more variable.) In the BYDV-Avena system, we developed protocols for consistently infecting target plants (and avoiding infection of control plants) using aphid caging on leaves. We measured that infected plants exhibited reduced photosynthesis, plant (including root) biomass, and root:shoot ratio, as well as simplified root system architecture. We established procedures for sampling the organic compounds carried specifically in phloem (vascular tissue) of leaves and roots, using aphid stylectomy. We used FTICR-MS, Orbitrap GC-MS, and LC-MS/MS to analyze organic compounds in phloem, liquid around roots of plants grown hydroponically, and pore water around roots in soil, and found differences in the compounds in solution bathing roots when infected and uninfected plants were grown hydroponically. Finally, we synthesized isotopically-labeled mineral–organic matter (MAOM) associations in the lab and developed assays using them in solution and in soil. Assays quantified the extent and rate of mineralization of labeled MAOM that was mobilized by functionally distinct rhizodeposits and then attacked by microbes. Two mechanisms for MAOM mobilization emerged, with distinct dynamics. During “direct” mobilization, rhizodeposits such as the strong ligand oxalic acid could drive rapid dissolution of minerals, mobilizing MAOM. During “indirect” mobilization, rhizodeposits such as the simple sugar glucose did not attack minerals directly but instead intensified microbial activity, which led to mobilization via changes in e.g. pH, Eh, and microbial metabolite production (Li et al. 2021). Mechanistic understanding derived from these data and our ongoing experiments using these techniques will inform future development of ELM. Plant roots not only contribute newly fixed organic compounds to soils, but also root activities can drive mineralization of the carbon and nutrients mobilized off minerals via “indirect” or “direct” mechanisms. Using viral infection as a new tool, ongoing combined experimentation and modeling will explore the strength and larger-scale significance of the cascade of processes from rhizodeposition to MAOM mobilization for soil carbon storage and nutrient cycling in terrestrial ecosystems. And if viral infection leads quite generally to “sticky roots”, our perception of the potential importance of prevalent virus infection in terrestrial landscapes will be transformed.

54 ENVIRONMENTAL SCIENCES↗

Performance Validation of Endcap Timing Layer Detector Modules for CMS Phase-2 Upgrade

The High-Luminosity Large Hadron Collider (HL-LHC) will operate up to 200 simultaneous collisions per bunch crossing, which is a significant jump from the current value of about 30 collisions per bunch crossing, producing significant pileup that challenges accurate event reconstruction. To address this, the Compact Muon Solenoid (CMS) experiment is implementing the Endcap Timing Layer (ETL), a precision timing detector designed to provide timing measurements with a resolution of approximately 50 ps per hit and 35 ps per reconstructed track. This project focuses on the characterization and validation of ETL detector modules using laboratory laser test data. ETL performance is evaluated by analyzing key quantities such as Bunch Crossing Identification (BCID), Time-of-Arrival (TOA), Time-over-Threshold (TOT), Noise Stability etc. The resulting analysis provides insight into the timing performance and operational stability of ETL modules, contributing to the quality assurance process req uired before their installation in the CMS experiment and ensure that the modules can meet the long-term reliability requirements of approximately 10 years of operation without replacement.

Chipara, Munashe [Fermilab]↗

Experimental workflow to estimate model parameters for evaluating long term viscoelastic response of CO2 storage caprocks

Understanding the time-dependent behavior of reservoir and sealing formations is critical to assessing risks associated with geological carbon storage since time-dependent deformation strongly influences mechanical responses of some rock types. Many studies have evaluated the risk of CO2 leakage and induced seismicity by assuming poroelastic rheology in sealing formations. Few have considered viscoelastic or other time-dependent responses, where the existing literature adopts 1D models to represent long-term time-dependent responses. This is primarily because to date, the general form of a reasonable 3D time-dependent model for rocks remains unclear. In this paper, we address this unclear issue by proposing a new workflow to select constitutive modeling parameters to evaluate if a 3D viscoelastic model is reasonable using several-hour-long experimental data and a power-law response to extrapolate to the decades-long time frames of interest in geologic carbon storage. To provide experimental data, we conducted multi-level loading/unloading triaxial relaxation tests with four rock types. The experimental results showed that the maximum load relaxation observed is approximately 49%, with some rock types showing as little as 1.4%. Using a simple linear viscoelastic model, parameters were chosen such that a maximum deviation of 1.5 MPa in axial stress and 7 MPa in radial stress was attained with the extrapolated 30-year data. We found that a reasonable parameter range for the normalized elastic modulus is 0.1~2 for rocks with significant time-dependent responses and 0.01~0.06 for those with small time-dependent responses. No matter how significant time-dependent responses are for rocks considered, our results showed that the relaxation time has a general range of 1~10^10 s, whose time scale can be one or two orders higher than a time frame typically envisioned for CO2 injection projects.

Stress relaxation, 3D time-dependent model, viscoe↗

Cost Efficient and Highly Weather-Resistant Solar Panel Backsheet Produced through Continuous Co-Extrusion Processing

The efficient generation and delivery of ‘clean energy” through photovoltaic (PV) technology relies heavily on the cost, performance and reliability of solar panels, along with the individual components used in assembly of those panels. In order to continue towards the Department of Energy’s (DOE) goals of driving costs down, the lifetime of high-output power generation equipment (i.e. solar modules) must be extended to reduce costs associated with power output degradation and replacement of failed or degraded panels. One of the major sources of module failures in the past 30 years has been the failure of the solar panel backsheet. Failure of this component causes severe output losses due to oxidation and yellowing of the module while creating safety concerns as the major electrical insulation of the module is compromised. Tomark-Worthen LLC was formed in 2012 with the goal of designing and manufacturing novel PV backsheets and encapsulants that would be produced in the United States of America and exceed expectations of domestic and international module producers. These backsheets would improve upon known backsheet design failures (i.e. Isovoltaic’s AAA backsheet) and create domestic manufacturing jobs in the PV sector. This goal became a reality with a first-generation product in 2018 and now, with the support of the DOE, Tomark-Worthen has launched a second-generation product known as PhotoMark® Reflections™ 205-3 and 360-3. This 2+ year effort began in late 2017 with a screening of potential polymeric materials and backsheet structural designs. Performance evaluations of each material provided the necessary data needed to select the proper material combinations and move forward into the design of the manufacturing process. These decisions were made by teaming with a local university, well-respected government laboratories, and private research organizations who provided the tools necessary to predict long-term performance of these materials in much shorter periods of time. Once the go/no-go criteria were met at the mid-point of the project, the effort transitioned to predicting 30+ year performance, achieving certifications, and improving manufacturing efficiencies designed to lower costs in order to be competitive in a cost-driven market. Major project accomplishments include recognition of the new backsheet by Underwriters Laboratories (UL) and international certification for 1000V and 1500V modules by TUV Sud. Both 1000V and 1500V products have been proven on several module manufacturing lines and initial customer orders have been received by both domestic and international module producers. Accelerated exposure testing has shown that the performance of this backsheet exceeds the prior polyamide-based backsheet known to fail in the field. Cost-models and initial customer orders have shown the ability to produce this backsheet at a cost acceptable to many domestic manufacturers, while International costs for standard backsheet remains extremely low. Tomark-Worthen remains one of the only U.S. companies manufacturing backsheet domestically and this has drawn interest from many domestic module manufacturers looking to improve their material supply logistics by avoiding long lead times and custom’s headaches while avoiding current tariffs on Chinese-made components. Along with the launch of a new PV backsheet, this project has provided a critical deliverable to the PV R&D community. This deliverable is the knowledge that not all polyamide-containing backsheets are doomed to failure as the earlier versions did. There has been a fear amongst the PV community to consider these materials due to the failure of one design. This effort has brought a new level of interest to the scientific community as it has been shown that polyamides can be used successfully in a well-designed backsheet. As we move forward from this project, we are excited to see how backsheet technology and manufacturing in the U.S. will continue to progress and grow.

14 SOLAR ENERGY↗

Influence of tower shadow on downwind flexible rotors: Field tests and simulations

Abstract As wind turbine rotors become larger, the blades become more flexible, requiring extra stiffness and cost to avoid the risk of tower strike. Wind turbines in a downwind configuration have a reduced risk of tower strike because the rotor thrust acts away from the tower. However, downwind blades pass through the wake of the tower, and the resulting load variation may contribute to blade fatigue. To date, there have been no field tests to quantify this tower shadow effect on unsteady blade moments. The present study reports on the first field testing of a flexible, downwind, coned rotor and compares the experimental data against simulations run in OpenFAST. The tower shadow effect is simulated using the conventional Powles model and a new Eames model (developed herein), which includes the influence of upstream turbulence. Both models reasonably predict the blade root out‐of‐plane bending moment data and the tower shadow dip magnitude when compared to field test data in Region 3. Tower shadow was found to increase the short‐term Damage Equivalent Loads (DELs) by less than 10% compared to other effects (gravity, shear, and turbulence), and the predictions were consistent with experiments. These results indicate that the tower shadow effect can be reasonably modeled with the simpler Powles model and that the tower shadow effect can be small compared to the effect of turbulence. However, long‐term fatigue due to tower shadow should be included in detailed structural analysis and design of the rotor and the tower.

Simpson, Juliet G.↗

Predictive model using artificial neural network to design phase change material-based ocean thermal energy harvesting systems for powering uncrewed underwater vehicles

Uncrewed Underwater Vehicles (UUVs) are a major beneficiary of the phase change material (PCM)-based ocean thermal energy harvesting technology for their mission needs. However, this technology relies on different parameters and energy conversion steps that could be critical to the general energy generation efficiency. Sea trials showed that the design performed lower than their laboratory design specifications. This underperformance results from different factors, mainly the UUV’s trajectory, travel time, underwater ocean currents, temperature fluctuations, and biofouling on the heat exchanger due to long term underwater operations. Therefore, there exists a need to continuously monitor the ambient energy harvesting system and predict system performance, for mission planning purposes. Two major parameters influencing the energy harvesting system include the final pressure inside the hydraulic energy storage vessel or accumulator, and the electrical load value. Here, this work focuses on the hydraulic to electric energy conversion system. Therefore, a combination of numerical model and experimental testing is used to develop a predictive model using artificial neural network using MATLAB. After validation with experimental testing, 1000 data samples obtained from the numerical model are used to train the ANN. Compared to the experimental results, the developed ANN model can predict in less than a second the designed benchtop system’s total efficiency with less than 15 percent maximum error range. This predictive model development represents a cost-effective way for optimization and a computational energy efficient mode aboard UUVs for mission planning for deployed UUVs using PCM-based ocean thermal energy harvesting technology.

30 DIRECT ENERGY CONVERSION↗