Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “land surface temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Utilization of satellite imagery by in-flight aircraft

Present and future utilization of satellite weather data by commercial aircraft while in flight was assessed. Weather information of interest to aviation that is available or will become available with future geostationary satellites includes the following: severe weather areas, jet stream location, weather observation at destination airport, fog areas, and vertical temperature profiles. Utilization of this information by in-flight aircraft is especially beneficial for flights over the oceans or over remote land areas where surface-based observations and communications are sparse and inadequate.

Luers, J. K.↗

Effect of cloud-radiation feedback on the climate of a general circulation model

Experiments are described which show significant changes in the simulated large-scale dynamical circulation of a global model. Fixed clouds acting as zonally asymmetric radiative heat sources increase the generation of eddy available potential energy (EAPE) and the energy's conversion to eddy kinetic energy. Generation of EAPE by net radiative heating increases by 50% (0.11 W/sq m) for the fixed cloud experiment. The increase caused by the stationary component is much larger (approximately 100%), but it is partially compensated by a decrease caused by the transient component. A substantial increase is found in the variances of the planetary-scale stationary waves and the medium-scale waves of 2.7 day period. Although the sea surface temperatures are prescribed identically in both integrations, the changes in evaporation and precipitation are found to be much larger over the oceans than over the land.

Shukla, J.↗

Effects of Vegetation and of Heat and Vapor Fluxes from Soil on Snowpack Evolution and Radiobrightness

The radiobrightness of a snowpack is strongly linked to the snow moisture content profile, to the point that the only operational inversion algorithms require dry snow. Forward dynamic models do not include the effects of freezing and thawing of the soil beneath the snowpack and the effect of vegetation within the snow or above the snow. To get a more realistic description of the evolution of the snowpack, we reported an addition to the Snow-Soil-Vegetation-Atmosphere- Transfer (SSVAT) model, wherein we coupled soil processes of the Land Surface Process (LSP) model with the snow model SNTHERM. In the near future we will be adding a radiobrightness prediction based on the modeled moisture, temperature and snow grain size profiles. The initial investigations with this SSVAT for a late winter and early spring snow pack indicate that soil processes warm the snowpack and the soil. Vapor diffusion needs to be considered whenever the ground is thawed. In the early spring, heat flow from the ground into a snow and a strong temperature gradient across the snow lead to thermal convection. The buried vegetation can be ignored for a late winter snow pack. The warmer surface snow temperature will affect radiobrightness since it is most sensitive to snow surface characteristics. Comparison to data shows that SSVAT provides a more realistic representation of the temperature and moisture profiles in the snowpack and its underlying soil than SNTHERM. The radiobrightness module will be optimized for the prediction of brightness when the snow is moist. The liquid water content of snow causes considerable absorption compared to dry snow, and so longer wavelengths are likely to be most revealing as to the state of a moist snowpack. For volumetric moisture contents below about 7% (the pendular regime), the water forms rings around the contact points between snow grains. Electrostatic modeling of these pendular rings shows that the absorption of these rings is significantly higher than a sphere of the same volume. The first implementation of the radiobrightness module will therefore be a simple radiative transfer model without scattering.

soil↗

Evaluation and Validation of a High Spatial Resolution Satellite Soil Moisture Product over the Continental United States

The soil moisture (SM) data retrieved from the Soil Moisture Active and Passive (SMAP) satellite are available at a 9 km grid spacing since April 2015. This product can provide valuable information for research and applications in hydrology and other related fields. However, the resolution may be too coarse for applications at catchment or field scale. In this study, an established downscaling methodology, which had a major modification regarding its application on the SMAP 33 km domain, was implemented to develop a 1 km soil moisture product based on the SMAP 9 km data. The algorithm proposed here is based on the thermal inertia principle and developed by modeling the relationship between surface temperature difference and SM for different Normalized Difference Vegetation Index (NDVI) classes. The model functions were established and tuned using data from the NASA’s Land Information System (LIS) North America Land Data Assimilation System (NLDAS) and remotely sensed VISible/InfRared (VIS/IR) reflectance data from Long Term Data Record (LTDR) AVHRR (Advanced Very High Resolution Radiometer) for the growing season months of April-September 1981–2018. These were then implemented using the MODIS (Moderate Resolution Imaging Spectroradiometer) data over the Continental United States (CONUS) domain. Validation activities were carried out using in situ measurements distributed through the International Soil Moisture Network (ISMN). The validation results computed using the 1 km SM data showed that the R2, unbiased RMSE (root mean square error) and bias were improved relative to the 9 km SMAP product by 0.045, 0.018m3/m3 and 0.001m3/m3, respectively. The 1 km SM also exhibited a strong time-series autocorrelation. Further accuracy assessment analyses indicated that precipitation might contribute to the uncertainties in both the 9 km SMAP and 1 km downscaled SMAP SM products.

SMAP↗

Rolling DICE to Advance Knowledge of Land-Atmosphere Interactions

The Diurnal Land-Atmosphere Coupling Experiment (DICE) aims to explore the complex interactions between the land surface and atmospheric boundary layer, which are generally not well understood and difficult to isolate in models. The project involves over 10 different models, combining expertise from both land surface and atmospheric boundary-layer modelling groups. A simple three-stage methodology is designed to assess land-atmosphere feedbacks. Stage 1: the individual components are assessed in isolation, driven and evaluated against observational data; stage 2: the impact of coupling is investigated; stage 3: the sensitivity of the stand-alone models to variations in driving data is explored. For this initial study, a three-day clear-sky period in the mid-west USA over, an assumed simple, predominantly grass surface was simulated using data from the CASES-99 field campaign. Key conclusions from the study include: (1) the memory of vegetation state within Land Surface Models (LSMs) needs attention; (2) the height of atmospheric forcing for LSMs is important, particularly for the nocturnal boundary layer, and this has implications for both observations and vertical resolution for atmospheric models; (3) land-atmosphere feedbacks reduce errors in simulated surface fluxes at the expense of the accuracy of the variables that the models are designed to simulate (e.g., temperature, humidity and wind speed); (4) problems remain in representing the stable boundary layer in atmospheric models; (5) the mixing of temperature and humidity within the boundary layer may need to be represented separately; (6) differences in daytime profiles of heat, moisture and momentum between models are mainly due to the way the models erode the inversion at the top of the boundary layer, rather than differences in the surface fluxes. Resultant variations in modelled boundary layer heights have a substantial impact on relative humidity and could partially explain variations in coupling strength between models in the GLACE experiment.

Martin Best↗

The environmental influence on tropical cyclone precipitation

The intensity, spatial, and temporal changes in precipitation were examined in three North Atlantic hurricanes during 1989 (Dean, Gabrielle, and Hugo) using precipitation estimates made from Special Sensor Microwave/Imager (SSM/I) measurements. In addition, analyses from a barotropic hurricane forecast model and the European Centre for Medium-Range Weather Forecast model were used to examine the relationship between the evolution of the precipitation in these tropical cyclones and external forcing. The external forcing parameters examined were (1) mean climatological sea surface temperatures, (2) vertical wind shear, (3) environmental tropospheric water vapor flux, and (4) upper-tropospheric eddy relative angular momentum flux convergence. The analyses revealed that (1) the SSM/I precipitation estimates were able to delineate and monitor convective ring cycles similar to those observed with land-based and aircraft radar and in situ measurements; (2) tropical cyclone intensification was observed to occur when these convective rings propagated into the inner core of these systems (within 111 km of the center) and when the precipitation rates increased; (3) tropical cyclone weakening was observed to occur when these inner-core convective rings dissipated; (4) the inward propagation of the outer convective rings coincided with the dissipation of the inner convective rings when they came within 55 km of each other; (5) in regions with the combined warm sea surface temperatures (above 26 C) and low vertical wind shear (less than 5 m/s), convective rings outside the region of strong lower-tropospheric inertial stability could be initiated by strong surges of tropospheric moisture, while convective rings inside the region of strong lower-tropospheric inertial stability could be enhanced by upper-tropospheric eddy relative angular momentum flux convergence.

Rodgers, Edward B.↗

Importance of the Annual Cycles of SST and Solar Irradiance for Circulation and Rainfall: A Climate Model Simulation Study

Annual cycle of climate and precipitation is related to annual cycle of sunshine and sea-surface temperatures. Understanding its behavior is important for the welfare of humans worldwide. For example, failure of Asian monsoons can cause widespread famine and grave economic disaster in the subtropical regions. For centuries meteorologists have struggled to understand the importance of the summer sunshine and associated heating and the annual cycle of sea-surface temperatures (SSTs) on rainfall in the subtropics. Because the solar income is pretty steady from year to year, while SSTs depict large interannual variability as consequence of the variability of ocean dynamics, the influence of SSTs on the monsoons are better understood through observational and modeling studies whereas the relationship of annual rainfall to sunshine remains elusive. However, using NASA's state of the art climate model(s) that can generate realistic climate in a computer simulation, one can answer such questions. We asked the question: if there was no annual cycle of the sunshine (and its associated land-heating) or the SST and its associated influence on global circulation, what will happen to the annual cycle of monsoon rains? By comparing the simulation of a 4-year integration of a baseline Control case with two parallel anomaly experiments: 1) with annual mean solar and 2) with annual mean sea-surface temperatures, we were able to draw the following conclusions: (1) Tropical convergence zone and rainfall which moves with the Sun into the northern and southern hemispheres, specifically over the Indian, African, South American and Australian regions, is strongly modulated by the annual cycles of SSTs as well as solar forcings. The influence of the annual cycle of solar heating over land, however, is much stronger than the corresponding SST influence for almost all regions, particularly the subtropics; (2) The seasonal circulation patterns over the vast land-masses of the Northern Hemisphere at mid and high latitudes also get strongly influenced by the annual cycles of solar heating. The SST influence is largely limited to the oceanic regions of these latitudes; (3) The annual mode of precipitation over Amazonia has an equatorial regime revealing a maxima in the month of March associated with SST, and another maxima in the month of January associated with the solar annual cycles, respectively. The baseline simulation, which has both annual cycles, depicts both annual modes and its rainfall is virtually equal to the sum of those two modes; (4) Rainfall over Sahelian-Africa is significantly reduced (increased) in simulations lacking (invoking) solar irradiation with (without) the annual cycle. In fact, the dominant influence of solar irradiation emerges in almost all monsoonal-land regions: India, Southeast Asia, as well as Australia. The only exception is the Continental United States, where solar annual cycle shows only a relatively minor influence on the annual mode of rainfall.

Sud, Yogesh C.↗

Design of a Thermal and Micrometeorite Protection System for an Unmanned Lunar Cargo Lander

The first vehicles to land on the lunar surface during the establishment phase of a lunar base will be unmanned lunar cargo landers. These landers will need to be protected against the hostile lunar environment for six to twelve months until the next manned mission arrives. The lunar environment is characterized by large temperature changes and periodic micrometeorite impacts. An automatically deployable and reconfigurable thermal and micrometeorite protection system was designed for an unmanned lunar cargo lander. The protection system is a lightweight multilayered material consisting of alternating layers of thermal and micrometeorite protection material. The protection system is packaged and stored above the lander common module. After landing, the system is deployed to cover the lander using a system of inflatable struts that are inflated using residual fuel (liquid oxygen) from the fuel tanks. Once the lander is unloaded and the protection system is no longer needed, the protection system is reconfigured as a regolith support blanket for the purpose of burying and protecting the common module, or as a lunar surface garage that can be used to sort and store lunar surface vehicles and equipment. A model showing deployment and reconfiguration of the protection system was also constructed.

Hernandez, Carlos A.↗

Entry Descent and Landing Workshop Proceedings: The Mars Science Laboratory (MSL) Entry, Descent and Landing Instrumentation (MEDLI) Hardware - Volume 1

Objectives: Measure Pressure: a) Confirm spacecraft aerodynamics. b) Independently measure attitude. c) Determine density profile. d) Determine wind component. Measure Temperature: a) Verify heating levels on spacecraft surface. b) Determine recession amount and rate. c) Validate material response at Mars conditions. The better we understand the Mars entry environment, the better we can design the next spacecraft.

Munk, Michelle M.↗

Enabling Mars Radio Occultation by Smallsats

We introduce a Mars Radio Occultation (RO) mission concept leveraging on small satellite (smallsat) technologies that will enable measurements that address both Mars science and exploration priorities. The RO technique measures the Doppler shift of radio signals of a spacecraft occulting behind a planet’s limb that contains information about the planet’s atmospheric density, temperature, and pressure. We design a smallsat constellation and simulate “crosslink” RO observations between the smallsats to determine the expected accuracy and spatiotemporal coverage of Mars RO atmospheric profiles. Such measurements are key to spacecraft Entry, Descent, and Landing (EDL) and Ascent from the Surface (AST) of Mars. Today, there are limited number of Mars atmospheric profiles with high vertical resolution, especially measurements near the surface that are difficult to obtain from satellite-based passive instruments due to atmospheric absorption. We find that crosslink ROs between a constellation of six smallsats provide global and diurnal cycle coverage with dozens of occultations per day, providing temperature information from near-surface up to ~45 km with altitude-dependent accuracy that ranges between <0.5 K at lower altitude to <5 K in the middle-to-upper atmosphere. Ionospheric ROs reveal an expected electron density of ~5 – 10% at the peak ionospheric height between 100 and 140 km. We conclude that observations obtained from a smallsat constellation can augment existing observing platforms by reducing observational gaps and yield high resolution measurements required for safe spacecraft operations during EDL and AST.

Martinez, German↗

Assimilation of Soil Moisture Observations Over Land Improves Analysis and Prediction of Tropical Cyclone Idai

Soil moisture conditions can impact the circulation and structure of a tropical cyclone (TC) when part or all of the circulation is over land. Dry land surface conditions may lead to faster dissipation of a TC over land, whereas very wet conditions may lead to a prolonged maintenance of its intensity. While this relationship is relatively well understood in theory, applications of these findings in the context of numerical weather prediction (NWP) have been limited. Here we present a case study that explores the potential of improving TC predictions through an improved soil moisture initialization in an NWP framework. Specifically, we examine the impact of assimilating observations from the NASA Soil Moisture Active Passive (SMAP) mission into the NASA Goddard Earth Observing System (GEOS) global weather model on the prediction of South-West Indian Ocean TC Idai (2019). SMAP provides accurate L-band (1.4 GHz) brightness temperatures (Tb) observations that are sensitive to soil moisture globally and at high revisit times of 2-3 days. It has previously been shown that the assimilation of SMAP Tbs significantly improves modeled land surface states. Here we evaluate: (i) forecasts initialized from an analysis that is comparable to the GEOS operational analysis (without SMAP Tb assimilation) and (ii) forecasts initialized from an analysis that additionally assimilates SMAP Tb observations. We find that in the analysis with SMAP assimilation, the TC has a better-defined, more aligned vertical structure over land relative to the control run; moreover, the analyzed TC size, as measured by the wind speed radius, better matches the observed TC size. We further find significant reductions in the forecast intensity error and the forecast along-track error, measured against observations. The largest error reductions occur at lead times of 36 to 72 hours, suggesting that the land with its longer memory gains in importance as a source of predictability at this timescale. An investigation of the underlying mechanisms leading to the skill improvements from SMAP data assimilation revealed that the assimilation of SMAP leads to wetter soil moisture conditions and an increased latent heat flux in the SMAP analysis, which results in a TC with higher column-integrated total moisture content and total energy compared to the control analysis.

Jana Kolassa↗

An ensemble formulation of PBL fluxes in a GCM

An ensemble approach is applied to Planetary Boundary Layer (PBL) calculations with the bulk Richardson number identified as the key parameter. An ensemble averaging calculation was carried out to rederive the bulk friction and heat transport coefficients for the mean condition. Two simulations are carried out and compared. Significant differences in PBL fluxes low level cloudiness, land surface roughness heights, and surface evaporation are noted between the modified and unmodified simulations. Modifications to the model were: (1) the relationship between actual and potential Effective Temperature (ET) to accord with Sud and Fennessy (1982); (2) maximum permissible instantaneous ET at any time is 1.5 mm per hr; (3) moisture distribution in low level cumulus convection to be consistent with no precipitation; (4) appearance of supersaturation clouds to be consistent with supersaturation condition at that level; (5) invoking a simple function for stomatal diffusion effect in the ET calculation.

Sud, Y. C.↗

The advanced microwave precipitation radiometer: A new aircraft radiometer for passive precipitation remote sensing

Past studies of passive microwave measurements of precipitating systems have yielded broad empirical relationships between hydrometeors and microwave transmission. In general, these relationships fall into two categories of passive microwave precipitation retrievals rely upon the observed effect of liquid precipitation to increase the brightness temperature of a radiometrically cold background such as an ocean surface. A scattering-based method is based upon the effect that frozen hydrometeors tend to decrease the brightness temperature of a radiometrically warm background such as land. One step toward developing quantitative brightness temperature-rain rate relationships is the recent construction of a new aircraft instrument sponsored by National Aeronautics and Space Administration/Marshall Space Flight Center (NASA/MSFC). This instrument is the Advanced Microwave Precipitation Radiometer (AMPR) designed and built by Georgia Tech Research Institute to fly aboard high altitude research aircraft such as the NASA ER-2. The AMPR and its accompanying data acquisition system are mounted in the Q-bay compartment of the NASA ER-2.

Hood, Robbie E.↗

Mars Pathfinder meteorological observations on the basis of results of an atmospheric global circulation model

The Mars Pathfinder Meteorological Package (ASI/MET) will measure the local pressure, temperature, and winds at its future landing site, somewhere between the latitudes 0 deg N and 30 deg N. Comparable measurements have already been obtained at the surface of Mars by the Viking Landers at 22 deg N (VL1) and 48 deg N (VL2), providing much useful information on the martian atmosphere. In particular the pressure measurements contain very instructive information on the global atmospheric circulation. At the Laboratoire de Meteorologie Dynamique (LMD), we have analyzed and simulated these measurements with a martian atmospheric global circulation model (GCM), which was the first to simulate the martian atmospheric circulation over more than 1 year. The model is able to reproduce rather accurately many observed features of the martian atmosphere, including the long- and short-period oscillations of the surface pressure observed by the Viking landers. From a meteorological point of view, we think that a landing site located near or at the equator would be an interesting choice.

Forget, Francois↗

Assimilation of Polar Orbiting Space-Based Data and Its Impact on Weather Prediction

This portion of the Data Assimilation and Numerical Weather Prediction Benefits presentation will describe: the need for remotely sensed data, the types of observations that have been made and will be available, how satellite data have been and are being assimilated, the impact of the data on weather analysis and prediction in both the U.S and abroad and the potential impact of new observing systems on NWP. Specific observing systems that will be discussed include: satellite temperature and moisture soundings/radiances (TOVS, ATOVS, AIRS/AMSU), satellite surface winds from both passive and active microwave atmospheric motion winds (from MODIS or MISR) precipitation measurements clouds and land surface measurements (e.g. from MODIS) lidar wind profiles.

Atlas, Robert M.↗

NASA SPoRT GOES-R Proving Ground Activities

The NASA Short-term Prediction Research and Transition (SPoRT) program is a partner with the GOES-R Proving Ground (PG) helping prepare forecasters understand the unique products to come from the GOES-R instrument suite. SPoRT is working collaboratively with other members of the GOES-R PG team and Algorithm Working Group (AWG) scientists to develop and disseminate a suite of proxy products that address specific forecast problems for the WFOs, Regional and National Support Centers, and other NOAA users. These products draw on SPoRT s expertise with the transition and evaluation of products into operations from the MODIS instrument and the North Alabama Lightning Mapping Array (NALMA). The MODIS instrument serves as an excellent proxy for the Advanced Baseline Imager (ABI) that will be aboard GOES-R. SPoRT has transitioned and evaluated several multi-channel MODIS products. The true and false color products are being used in natural hazard detection by several SPoRT partners to provide better observation of land features, such as fires, smoke plumes, and snow cover. Additionally, many of SPoRT s partners are coastal offices and already benefit from the MODIS sea surface temperature composite. This, along with other surface feature observations will be developed into ABI proxy products for diagnostic use in the forecast process as well as assimilation into forecast models. In addition to the MODIS instrument, the NALMA has proven very valuable to WFOs with access to these total lightning data. These data provide situational awareness and enhanced warning decision making to improve lead times for severe thunderstorm and tornado warnings. One effort by SPoRT scientists includes a lightning threat product to create short-term model forecasts of lightning activity. Additionally, SPoRT is working with the AWG to create GLM proxy data from several of the ground based total lightning networks, such as the NALMA. The evaluation will focus on the vastly improved spatial coverage of the GLM, but with the trade-off of lower resolution compared to the NALMA. In addition to the above tasks, SPoRT will make these data available in the NWS next generation display software, AWIPS II. This has already been successfully completed for the two basic GLM proxies. SPoRT will use these products to train forecasters on the capabilities of GOES-R and foster feedback to develop additional products, visualizations, and requirements beneficial to end users needs. These developments and feedback will be made available to the GOES-R Proving Ground for the upcoming 2010 Spring Program in Norman, Oklahoma.

Stano, Geoffrey T.↗

The Vegetation Greenness Trend in Canada and US Alaska from 1984-2012 Landsat Data

To assess the North American high-latitude vegetation response to the rising temperature, we derived NDVI end for 91.2% of the non-water, non-snow land area of Canada and Alaska using the peak-summer Landsat surface reflectance data of 19842012. Our analysis indicated that 29.4% and 2.9 of the land area of Canada and Alaska showed statistically significant positive (greening) and negative (browning) trends respectively, at significance level p b 0.01, after burned forest areas were masked out. The area with greening trend dominated over that with browning trend for all land cover types. The greening occurred primarily in the tundra of western Alaska, along the north coast of Canada and in northeastern Canada; the most intensive and extensive greening occurred in Quebec and Labrador. The browning occurred mostly in the boreal forests of eastern Alaska. The Landsat-based greenness trend is broadly similar to the 8-km GIMMS AVHRR-based trend for all vegetation zones. However, for tundra, the Landsat data indicated much less extensive greening in Alaska North Slope and much more extensive greening in Quebec and Labrador, and substantially less extensive browning trend in the boreal forests that were free of fire disturbances. These differences call for further validation of the Landsat reflectance and the AVHRR NDVI datasets. Correlation study with local environmental factors, such as topography, glacial history and soil condition, will be needed to understand the heterogeneous greenness change at the Landsat scale.

Ju, Junchang↗

On the Origin of Monsoon

The notion that the continental-scale land-sea contrast is the main reason that monsoon circulation exists has been a long-held belief. The purpose of this paper is to point out that this notion should be substantially modified. The central idea of this notion states that in summer, radiative heating of the continent, say Asia, gives rise to a continental-scale thermal low and surrounding the thermal low in its southeast direction the low level wind flows in from south-west. This low-level inflow creates a convergence of moisture, which maintains the cumulus convection. And in winter, radiative cooling of continent gives rise to a thermal high and to its southeast the low-level wind is from northeast. The mechanism in this interpretation does undoubtedly exist. However, this mechanism, though believed to be the main driving force of monsoon, has not been tested in numerical experiments. There has been an increasing recognition in the recent years that monsoon is inextricably tied to the heating in the intertropical convergence zone (ITCZ). We propose that the main cause of monsoon is ITCZ's being substantially away from the equator. A brief qualitative explanation of why the ITCZ can be a source of monsoon circulation can be offered based on the circulation field forced by the ITCZ heating. The existence of the ITCZ's does not always have to rely on land-sea contrast on the continental scale. This is hinted in the fact that in February the ITCZ close to Australia (and its associated monsoon circulation) covers a longitudinal range several times as long as that of Australia and thus cannot possibly be caused mainly by the land-sea contrast associated with Australia. Yet, this cannot be used as a proof that the ITCZ in the Asian summer monsoon is not mainly due to land-sea contrast. One of the purposes of this work is to provide a convincing proof. In this work the role of land-sea contrast in the origin of monsoon is examined through numerical simulation with the Goddard general circulation model. The Asian and Australian monsoon circulations are obtained in a four-year integration and then the integration is repeated with Asia, the maritime continent, and Australia replaced by ocean. The sea surface temperature (SST) at each affected grid is specified as the SST at the first grid to the east that is an ocean grid in the first experiment. The latter integration shows that the monsoon circulation pattern over where south Asia and Australia were and the surrounding region has largely remained. The results discount land-sea contrast as the main cause of Asian monsoon. A third experiment is the same as the first except that the topography of Asia, the maritime continent, and Australia is reduced to zero. This experiment reveals that the difference between the first two experiments is due more to the removal of topography than to the removal of land-sea contrast. August precipitation is shown averaged over the last three years of each of the three experiments. They show that the Asian monsoon rainy region is largely intact in the second experiment and the difference between the second and the third experiment is mainly in the longitudinal location of the maximum precipitation. Additionally, in Asian and Australian winter monsoons land-sea contrast also plays only a modifying role. Although land-sea contrast plays only a modifying role in Asian and Australian (and Central American including Mexican) monsoons, it is the main reason that ITCZ (and thus monsoon) exists in Africa and South America. Thus, monsoons can be classified into two groups depending on whether land-sea contrast plays a major role.

Chao, Winston C.↗