SEARCH · Engineering Papers

Results for “higher form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Gauging the Impact of Cosmic-ray Feedback on the Stellar Initial Mass Function

Cosmic rays (CRs) drive ionization and influence gas dynamics in molecular clouds (MCs), potentially impacting the resulting star formation outcomes. Although previous simulations of individual star formation have included methods for CR transport (CRT), none have been large enough to resolve the stellar initial mass function (IMF). We conduct numerical simulations following the collapse of a 20,000 M ⊙ MC and the subsequent star formation including CRT, both with and without CRs accelerated by winds from the young massive stars, and compare against a non-CRT simulation. We show that after the first massive stars form, the cavity produced by feedback is more pronounced in the CRT simulations because the external CRs are able to propagate inward and compress the gas into higher-density structures. This increases the subsequent star formation in the cloud; by the end of the simulation, the star formation efficiency (SFE) in the CRT simulation including stellar wind CRs is 43% higher than the non-CRT simulation. The IMF is also top-heavy in comparison, with a slope above 1 M ⊙ that is shallower by ∼20%. These effects are also present in the simulation without wind-accelerated CRs, but they are not as pronounced; the SFE is only 16% higher than the non-CRT simulation, and the IMF high-mass slope is shallower by ∼10%. These results may explain some of the observed top-heavy IMFs, which typically occur in high-CR environments such as the Galactic center.

Fitz Axen, Margot [Oak Ridge National Laboratory (↗

DOE OSTI2024

Metal-Complex Inks for Lower Cost and Improved Passivation for Silicon Photovoltaic Metallization

This contribution introduces the silicon PV community to screen-printable metal-complex inks that potentially will reduce Ag usage in Si PV metallization to one-quarter and costs to one-third that of traditional particle-based pastes while also improving passivation. Metal-complex inks are formulated using a Tollen’s reaction to produce inks with a high percentage of diamminesilver (I) cations (22 wt %) in a solution of acetate and formate anions. When printed and dried, labile ammonia ligands evaporate, leaving behind silver cations which, when reduced by formate anions and acetic acid, plate out silver and silver acetate. When annealed to just 300 °C a dense metallic silver film forms with excellent conductivity, and adhesion to silicon. When compared to traditional particle-based screen-printing pastes, the metal-complex inks are much denser, have higher conductivity, use less Ag, and are a fraction of the cost. Importantly, the inks anneal from 90 – 450 °C allowing for improved passivation schemes compared with fired SiNx. This contribution highlights first experiments on the improved passivation of metallized poly-Si/SiO2 passivated contacts using metal-complex Ag inks.

Young, David L. (ORCID:0000000340970493)↗

DOE OSTI2020

Provision of Grid Services by PV Plants with Integrated Battery Energy Storage System: Preprint

Battery energy storage systems (BESS), due to their tremendous range of uses and configurations, may assist PV integration in any number of ways by increasing power system flexibility. In this paper we describe results of a research project conducted by NREL and First Solar for developing controls and demonstrating many use cases for PV-BESS systems including (1) matching generation to loads through time shifting, reducing PV curtailment,; (2) promoting higher levels of PV penetrations by balancing the grid through ancillary services; (3) use of PV-BESS systems to provide wide-area stability services in the form of oscillations damping controls; and (r) use of gird forming BESS for enabling black start and islanded applications for PV-BESS systems. In the paper we will also describe the unique multi-MW test and validation platform developed at NREL for conducting research on fielded utility-scale PV-BESS systems. The platform consists of First Solar 0.43 MW PV power plant, NREL’s 1MW/1MW BESS, 2MW PV power supplies and 7MVA power electronic grid simulator interfaced with industrial plant controllers and power-hardware-in-the-loop (PHIL) capability.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2023

Metal-Complex Inks for Lower Cost and Improved Passivation for Silicon Photovoltaic Metallization

This contribution introduces the silicon PV community to screen-printable metal-complex inks that potentially will reduce Ag usage in Si PV metallization to one-quarter and costs to one-third that of traditional particle-based pastes while also improving passivation. Metal-complex inks are formulated using a Tollen's reaction to produce inks with a high percentage of diamminesilver (I) cations (22 wt %) in a solution of acetate and formate anions. When printed and dried labile ammonia ligands evaporate, leaving behind silver cations which, when reduced by formate anions and acetic acid, plate out silver and silver acetate. When annealed to just 300 degrees C a dense metallic silver film forms with excellent conductivity, and adhesion to silicon. When compared to traditional particle-based screen-printing pastes, the metal-complex inks are much denser, have higher conductivity, use less Ag, and are a fraction of the cost. Importantly, the inks anneal from 90 - 450 degrees C allowing for better passivation schemes than fired SiNx. This contribution highlights first experiments on the improved passivation of metallized poly-Si/SiO2 passivated contacts using metal-complex, Ag inks compared with particle-based, fired pastes.

metal-complex ink↗

DOE OSTI2024

Characterization of alternate encounter assemblies of SARS-CoV-2 main protease

The assembly of two monomeric constructs spanning segments 1-199 (MPro 1-199 ) and 10-306 (MPro 10-306 ) of SARS-CoV-2 main protease (MPro) was examined to assess the existence of a transient heterodimer intermediate in the N-terminal autoprocessing pathway of MPro model precursor. Together, they form a heterodimer population accompanied by a 13-fold increase in catalytic activity. Addition of inhibitor GC373 to the proteins increases the activity further by ~7-fold with a 1:1 complex and higher order assemblies approaching 1:2 and 2:2 molecules of MPro 1-199 and MPro 10-306 detectable by analytical ultracentrifugation and native mass estimation by light scattering. Assemblies larger than a heterodimer (1:1) are discussed in terms of alternate pathways of domain III association, either through switching the location of helix 201 to 214 onto a second helical domain of MPro 10-306 and vice versa or direct interdomain III contacts like that of the native dimer, based on known structures and AlphaFold 3 prediction, respectively. At a constant concentration of MPro 1-199 with molar excess of GC373, the rate of substrate hydrolysis displays first order dependency on the MPro 10-306 concentration and vice versa. An equimolar composition of the two proteins with excess GC373 exhibits half-maximal activity at ~6 μM MPro 1-199 . Catalytic activity arises primarily from MPro 1-199 and is dependent on the interface interactions involving the N-finger residues 1 to 9 of MPro 1-199 and E290 of MPro 10-306 . Importantly, our results confirm that a single N-finger region with its associated intersubunit contacts is sufficient to form a heterodimeric MPro intermediate with enhanced catalytic activity.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Controlling P–C/C–H Bond Cleavage in Nickel Bis(diphosphine) Complexes: Reactivity Scope, Mechanism, and Computations

The synthesis of heteroleptic [Ni(P 2 N 2 )(diphosphine)][BF 4 ] 2 complexes and the cleavage of P–C and C–H bonds of the P 2 N 2 ligand in those complexes are reported here. The products are five-coordinate complexes in which Ni–C and P–H bonds have formed to give a cyclic moiety containing Ni–CH$=$NR 2 . The reactivity of [Ni(P 2 N 2 )(diphosphine)][BF 4 ] 2 complexes is influenced by the rigidity of the diphosphine, the steric effect of the substituents, and length of the carbon linker of the diphosphine ligands. Diphosphine ligands bearing a rigid backbone (e.g., dmpbz, 1,2-bis(dimethylphosphino)benzene) or aromatic substituents (e.g., dppe, 1,2-bis(diphenylphosphino)ethane) react with [Ni(P t Bu 2 N Bn 2 )(CH 3 CN) 2 ][BF 4 ] 2 to give P–C/C–H bond cleavage products. Both [Ni(P t Bu 2 N Bn 2 )(dmpe)(MeCN)][BF 4 ] 2 and [Ni(P t Bu 2 N Bn 2 )(dmpm)(MeCN)][BF 4 ] 2 (dmpm = 1,2-bis(dimethylylphosphino)methane) were prepared by the reaction of [Ni(P t Bu 2 N Bn 2 )(CH 3 CN) 2 ][BF 4 ] 2 with the corresponding diphosphine ligands. [Ni(P t Bu 2 N Bn 2 )(dmpe)(MeCN)][BF 4 ] 2 readily undergoes P–C/C–H bond cleavage in nitromethane. In sharp contrast, [Ni(P t Bu 2 N Bn 2 )(dmpm)][BF 4 ] 2 is stabilized by dmpm, a diphosphine with small bite angle, and does not show P–C/C–H bond cleavage reactivity. Computational results show that for complexes bearing less bulky diphosphine ligands, such as dmpm, the barriers for the rate-determining transition states are in some examples higher than 30 kcal/mol with the M06 functional, higher than those for complexes bearing more rigid or more bulky ligands, consistent with experimental studies. The calculated barriers for the first transition state correlated with increased values of the dihedral angle formed by the two NiP 2 planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Dual Function Solid State Battery with Self-Forming Self-Healing Electrolyte and Separator (Final Scientific/Technical Report)

Over the course of this program, we have demonstrated an improved rechargeable Li/I2 battery with reduced impedance, improved cyclability, improved Coulombic Efficiency, and the ability to “self-heal” during shorting events. Multi-year efforts have led to the development and improvements in the composition, fabrication, and preparation of the solid state electrolyte, the role of the interface, and design of appropriate test conditions. These investigations have led to significant improvements in Coulombic efficiency. By systematic development of a composite solid state electrolyte, this system is able to self-form upon charge, thus lending itself to long shelf life before use. The initial project objective was to demonstrate a solid-state rechargeable battery based on a Li-metal anode and iodine cathode with a self-forming, self-healing electrolyte and separator with high gravimetric and volumetric energy density. The final deliverables of this project build on a multi-year effort beginning with materials development and design to generate a suitable solid state electrolyte composite with demonstrated higher ionic conductivity compared to the baseline (LiI). Development in cell design and interface modification leading to the generation of rechargeable solid electrolyte cells with Coulombic efficiency improvements of ~3X over initial tests, as well as demonstration of self-healing behavior, where the cells retained their ability to continue extended cycling after shorting events. The hypothesis put forward as part of the initial concept for the project was that the cell chemistry would be self-healing. For example, if a lithium dendrite formed during charge of the cell and reached the iodine cathode, the reaction of the lithium dendrite with the iodine would consume the tip of the dendrite to form lithium iodide, more of the solid electrolyte. The formation of the solid electrolyte would allow the cell to recover and continue to function. This type of self-healing during cycling has been demonstrated and has the potential to improve on safety considerations that stem from shorting events in other Li- containing systems.

25 ENERGY STORAGE↗

DOE OSTI2021

Heating and acceleration of ions with Kappa distribution functions by low‐frequency Alfvén wave

Abstract Heating and acceleration of ions with Kappa distribution functions (with parameter ) in low‐beta plasmas, by a low‐frequency Alfvén wave, is investigated using test‐particle simulations, yielding interesting new results. As long as the Alfvén wave amplitude is sufficiently large, the computed net heating energy of ions becomes independent of the wave frequency and amplitude, always approaching the same value of . The eventual energy of ions is dictated only by the initial ion energy and the ratio of the magnetic field energy density to the plasma density. The heating effect of the Kappa ions increases with . During the heating process, the ions are picked up by the Alfvén wave and pitch angle scattered, forming a quasi‐isotropic spherical shell velocity distribution. The Kappa ions are accelerated in the parallel direction, reaching a bulk flow speed roughly equal to the local Alfvén speed. Higher ‐value in the initial Kappa distribution leads to faster saturation. The above results may explain certain features of the ion heating and acceleration in the solar wind and corona.

Li, Kehua↗

DOE OSTI2020

Synthesis, aphicidal activity and conformation of novel insect kinin analogues as potential eco‐friendly insecticides

Abstract BACKGROUND The discovery of ecofriendly insecticides through a new strategy for aphid control is important because of the substantial resistance and unexpected eco‐toxicity to honeybees caused by traditional insecticides. The insect kinins, a class of multifunctional insect neuropeptides, are considered for potential application in pest control. In our previous work we developed several series of insect kinin analogues and found a promising lead II‐1 with good aphicidal activity. To seek further eco‐friendly aphicides, the optimization of II‐1 is carried out in this study. RESULTS Fifteen novel Yaa 3 modified analogues based on the lead II‐1 were synthesized. The aphicidal tests indicated that IV‐3 , IV‐5 and IV‐10 exhibited significant activity against the soybean aphid Aphis glycines with LC 50 values of 0.0029, 0.0072 and 0.0086 mmol L –1 , respectively, higher than that of lead II‐1 and the commercial Pymetrozine. The molecular modeling results showed that analogues II‐1 , IV‐3 , IV‐5 , IV‐7 and IV‐10 formed a β‐turn‐like conformation, while the conformation of analogues IV‐1 , IV‐2 and IV‐9 seemed to be linear. Some structural elements favorable for the activity were proposed based on the conformation‐activity relationship of the analogues. CONCLUSION Insect kinin analogues derived from lead II‐1 by modifying the hydrolysis site Yaa 3 with natural, sterically hindered α‐ and β‐amino acids showed great potential as eco‐friendly insecticides. Inspiringly, the most active analogue IV‐3 can be a candidate for further development. The β‐turn‐like conformation and the orientation of the aromatic rings of the side chain of Phe 2 and Trp 4 may be critical factors beneficial to activity. © 2019 Society of Chemical Industry

Zhang, Chuanliang↗

DOE OSTI2026

Atomistic understanding of interdependence of crystal growth of two seeds embedded in glass

Recent results showed that during growth, a crystal seed embedded in glass experiences nonuniform forces from the host matrix. This result raised the possibility that during devitrification of glass, the growth of a crystal can be affected by the presence of neighboring crystals. To investigate the nature of any such interdependence of growth of neighboring crystals, atomic scale morphology of two seeds growing in a glass matrix was simulated as a function of their separation and relative misorientation. The results show a coupled rotation of seeds driven by (1) non-uniform forces from the surrounding glass, and (2) mutual interactions between the seeds. At small separations and low misorientation, each seed rotates toward perfect alignment, ultimately forming a single crystal. The onset and rate of alignment, as well as subsequent crystal growth, are strongly dependent on the growth temperature. In contrast, at larger separations and higher misorientation, the seeds cannot achieve full alignment before coalescing, resulting in polycrystalline structures.

36 MATERIALS SCIENCE↗

DOE OSTI2022

The S solubility of Cr and Al containing simulated low-activity waste glass

Here, the presence of sulfur-containing molten salt phases during vitrification is a particular problem which can be detrimental to the melter. Borosilicate compositions were designed to explore both the effects of a fixed amount of Cr, as Cr 2 O 3 or Na 2 CrO 4 , and the impact of Al 2 O 3 , on sulfur solubility as determined by progressively adding elemental S. The NABS series (with Al 2 O 3 ) has a higher SO 3 solubility of ~3.5 mol% while the NBS series (without Al 2 O 3 ) has a SO 3 solubility of ~2 mol%. Crystalline Cr 2 O 3 formed in the NABS series upon the addition of S but is not present in the NBS series. At the highest S addition, a separate salt phase always forms, and was identified as Na 2 (S,Cr)O 4 via electron dispersive spectroscopy, ultraviolet-visible spectroscopy, x-ray diffraction, and thermal analysis. Magic angle spinning nuclear magnetic resonance identified no change in the B coordination in either series as S is added, suggesting that the Na is scavenged from other locations, such as the Si sites, to charge compensate sulfate, whether in the glass or in the salt. The Cr precursor identity did not affect the observed overall behavior regarding sulfur, but did impact Cr redox as identified with Raman spectroscopy.

36 MATERIALS SCIENCE↗

DOE OSTI2022

The effects of dose, dose rate, and irradiation type and their equivalence on radiation-induced segregation in binary alloy systems via phase-field simulations

Radiation-induced segregation is a phenomenon commonly observed in many alloys which consists of the redistribution of elements (solute or interstitial impurities) under irradiation. The onset and development of radiation-induced segregation can only occur when a sufficient flux of defects is sustained and defect sinks are present. Irradiation dose, dose rate, and particle types all affect defect flux. In this work, we employ a phase-field model to examine the effects of dose, dose rate, and type of incident particles on radiation-induced segregation behavior in a model binary alloy. The phase-field model takes into account the formation and evolution of point defects as well as defect clusters, the diffusion and clustering of alloy species, the presence of additional extrinsic defect sinks in the form of dislocations, and two different methods of radiation-damage insertion, which are intended to simulate either light-ion/electron irradiation via Frenkel pairs or heavy-ion irradiation in the form of cascades. Our results show a dose-rate and particle-type dependence on the amount of solute segregation. We show that the material systems exposed to higher dose rates are less subjected to solute segregation at equivalent doses. We also show that such dose-rate-dependence behavior is due to a delay of the incubation dose at which radiation-induced segregation effectively starts. Particle type and the presence of dislocations can accentuate this behavior. Our model predictions correlate with many experimental observations made over the years on radiation-induced segregation providing credence to the simulation results. The methodology presented in this study allows for a first-order prediction of the dose rate at which proxy irradiation experiments could be performed to approximate radiation-induced segregation behaviors seen in targeted irradiation conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Hydrogen permeation in iron-chromium-aluminum (FeCrAl) alloys and the effects of microstructure and surface oxide

Iron–chromium–aluminum (FeCrAl) class alloys are candidates for use as cladding for accident-tolerant fuels and moderators. In this context, hydrogen isotope permeation in FeCrAl alloys is an important material property. Here, in the present work, the apparent permeability, effective diffusivity, and apparent solubility of hydrogen in the FeCrAl alloys C26M and Kanthal D (KD) were measured with gas-driven hydrogen permeation. Permeation measurements were conducted at temperatures of 400 to 700 °C and at gas-driven pressures from 1 to 100 kPa. In particular, the effect of grain size on hydrogen transport was studied with KD samples with three different microstructures: nanocrystalline (NC), ultra-fine grained (UFG), and coarse-grained (CG). The UFG and NC specimens had higher apparent activation energies (73.4 kJ mol -1 and 65.2 kJ mol -1 , respectively) for hydrogen permeability than the CG sample (46.9 kJ mol -1 ). An aluminum oxide layer formed on the primary- and secondary-side surfaces of all samples subjected to permeation experiments which demonstrated the propensity of FeCrAl alloys to form these innate oxide permeation barriers.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Hot Hydrogen Exposure of U x Zr 1-x C y Nuclear Fuel: The Influence of Composition and Density

Refractory carbide nuclear fuel has been one of the most promising fuel candidates for space nuclear propulsion due to its high melting point, temperature stability, and compatibility in a hot hydrogen environment. In this study, U x Zr 1-x C y fuel was produced by means of a carbothermic reduction process in different UC compositions including 5,10, 20, and 30 at.% UC in the fuel compound. The powder feedstock was consolidated via direct current sintering with densities up to 97% of the theoretical density. The samples with different U x Zr 1-x C y compositions were exposed to hot hydrogen at 2600 K for a cumulative time of 300 min. The samples were characterized by SEM, XRD, density, and measured for mass losses. The high-density samples displayed improved performance in hot hydrogen by minimizing porous sites and reducing areas of direct contact with hydrogen gas, leading to reduced mass losses. Variations in sample density proved to induce large changes in mass loss rates, increasing them up to 90%. The compositions with higher UC content reported the largest mass losses in the study. The loss of uranium occurred primarily at the surfaces exposed to the hot hydrogen where changes in the lattice constant confirmed losses exceeding 50% of the initial UC content in higher compositions, specifically to U 0.3 Zr 0.7 C y . XRD analyses revealed the presence of UH 3 in U 0.3 Zr 0.7 C y suggesting that metallic uranium formed inside the sample as a product of carbon losses. High-density U x Zr x-1 C y fuel with UC concentrations at or below 20 at.% UC exhibited stability and negligible density changes in a high temperature hydrogen environment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Syntheses of gold supported on metal oxides and their application in organic transformations

Herein, we report a general and straightforward synthesis method for gold supported on mesoporous and microporous metal oxides. Supported materials, in general, show higher crystallinity compare to unsupported systems as verified through powder X-ray diffraction (XRD). Also, through XRD, most of the metal is observed to be in its oxide form, whereas the gold support was found to be in its metallic state, which has been further confirmed from TEM. In terms of surface area, the catalyst was not found to follow any trend. Morphology wise, there are no changes observed after doping except in few cases. Combined results from XRD, X-ray fluorescence spectroscopy, Auger, and X-ray photoelectron spectroscopy suggest that gold is mainly in the bulk and very little (0.04% in case of gold doped calcium oxide) or non (in case of gold doped mixed manganese-cerium oxide) on the surface. The presence of Au (0) 4f peaks in XPS further confirms the metallic state of the gold. Oxides of indium, magnesium and calcium have been studied for the organic transformation reactions. An enhancement in activity and product selectivity was observed in the case of the gold supported catalysts. Indium serves as a great catalyst for C–C coupling and electrophilic aromatic substitution reactions and gives >99% conversion. Interestingly, 88% selectivity for C–C coupling and >99% selectivity for aromatic substitution have been achieved at 100 °C and room temperature respectively. Magnesium and calcium give Knoevenagel condensation products. At room temperature with very low catalyst loading, >99% conversion and selectivity were observed for the Knoevenagel reaction with as high as 35.30 TOF. Finally, a mechanism for the C–C coupling reaction has been proposed based on these results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Sooting tendencies of terpenes and hydrogenated terpenes as sustainable transportation biofuels

Terpenes are a diverse group of molecules that are synthesized by plants and microorganisms through combining units of isoprene (2-methyl-1,3-butadiene). They typically contain rings and methyl branches, which gives them high energy densities and low freezing points and makes them appealing candidates for sustainable transportation biofuels. Between the original biosynthesis and upgrading options such as hydrogenation, they have a large degree of freedom of structures, e.g., different carbon skeletons, positions of double bonds, and functional groups. Therefore, structure-property data is needed to downselect potential fuel candidates. Here, we measured the sooting tendencies of 17 C10 monoterpenes and 7 of their hydrogenated analogues. The hydrogenated compounds were custom synthesized, so the quantities were too small for conventional smoke point measurements. Thus, the sooting tendencies were quantified with yield sooting index (YSI), which is based on the soot yield in a fuel-doped non-premixed methane flame. Derived smoke points (DSPs) were estimated from a correlation between YSI and smoke point for other hydrocarbons. The YSI of terpenes and their derivatives varies widely from 85.6 to 248.5. The YSI follows the trend: terpenes > dihydroterpenes > tetrahydroterpenes. The DSPs of all the tetrahydroterpenes and some dihydroterpenes are higher than that of a Jet-A fuel sample, suggesting that they offer soot reduction benefits. Further, the YSIs depend strongly on molecular structure; for example, α-pinene and β-pinene have identical carbon skeletons and differ only in the position of one carbon-carbon double bond, but the YSI of α-pinene is 34% higher than that of β-pinene. Detailed decomposition analysis via density functional theory (DFT) suggests that compared with β-pinene, α-pinene requires fewer steps to form the first aromatic ring and the process is more thermodynamically favorable. The YSI difference between the pinenes is mainly affected by the identity of the products from the dominant decomposition pathways.

09 BIOMASS FUELS↗

DOE OSTI2020

Hydroxypyridinone-based stabilization of Np(IV) enabling efficient U/Np/Pu separations in the Adapted PUREX process

The classical process to recover uranium (U) and plutonium (Pu) from used nuclear fuel using tributyl phosphate (TBP), namely the Plutonium Uranium Redox EXtraction (PUREX) process, is complicated by the persistent presence of neptunium (Np) and thus requires extra purification steps. The concept of Adapted PUREX seeks to achieve Np recovery by adjusting the valence of the metal more effectively, thereby controlling its behavior more precisely. This study introduces the use of an aqueous hydroxypyridinone chelator, 3,4,3-LI(1,2-HOPO) (abbreviated as HOPO), to dictate the behavior of Np for recovery and meanwhile simplify cumbersome reprocessing steps. The interactions between Np and HOPO were probed mechanistically by way of absorption spectrophotometry, in conjunction with cyclic voltammetry. UV–Vis-NIR spectra illustrated the reduction of NpO 2 2+ to Np 4+ , with a fast reaction rate. Cyclic voltammetry revealed quasi-reversible processes between the oxidized and reduced forms of the ligand and its Np complexes. The corresponding heterogeneous rate constants (k 0 ) were estimated from the peak-to-peak separation potentials (ΔE p ), at ~ 4 – 35 μm/s for both HOPO and NpHOPO, with scan rates of 0.01 – 0.4 V/s. Meanwhile, the electromotive force (E MF ) as well as the change of Gibbs free energy (ΔG) were assessed from the half-wave potential (E 1/2 ), demonstrating the completeness of NpO 2 2+ reduction to Np 4+ by HOPO. The cumulative formation constant of the resulting NpHOPO complex (logβ 101 ) was determined by metal competition titration to be 42.0 ± 0.6, corroborating the extraordinarily high affinity of HOPO to tetravalent metal ions. Here, the prowess of valence control by HOPO and the high stability of the formed complex resulted in enhanced separations of Np from U and of Pu from U, with a maximum separation factor of ~7000 for both, nearly 90- and 10300-fold higher, respectively, than the values obtained using conventional PUREX formulae.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2026

Pseudocapacitive Titanium Oxynitride Nanowires for Ultrahigh Capacitance Supercapacitors

High-quality, multifunctional two-dimensional (2D) titanium oxynitide (TiNO) thin films and one-dimensional (1D) TiNO nanowires have been synthesized using a pulsed laser deposition, a simple, fast, and congruent evaporation method. First-principles calculations as a function of surface orientation and termination indicate that surface oxidation of TiNO nanowires can stabilize the (110) orientation observed experimentally. The specific capacitance value for the TiNO nanowire samples (2725 mF/cm 2 ) has been found to be nearly six times more than that of the TiNO thin film samples (400 mF/cm 2 ), which is attributed to the high packing density of TiNO nanowires over a given area. The nanowire samples have also been found to exhibit a significantly higher energy density (1.35 μWh/cm 2 ) than the TiNO thin-film samples (0.33 μWh/cm 2 ). Thus, the TiNO material system in thin-film and nanowire forms has been demonstrated to be a promising candidate for use as an electrode material in supercapacitors and other charge-storage applications.

capacitors↗