Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geodetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

A demonstration of a transportable radio interferometric surveying system with 3-cm accuracy on a 307-m base line

A precision geodetic measurement system (Aries, for Astronomical Radio Interferometric Earth Surveying) based on the technique of very long base line interferometry has been designed and implemented through the use of a 9-m transportable antenna and the NASA 64-m antenna of the Deep Space Communications Complex at Goldstone, California. A series of experiments designed to demonstrate the inherent accuracy of a transportable interferometer was performed on a 307-m base line during the period from December 1973 to June 1974. This short base line was chosen in order to obtain a comparison with a conventional survey with a few-centimeter accuracy and to minimize Aries errors due to transmission media effects, source locations, and earth orientation parameters. The base-line vector derived from a weighted average of the measurements, representing approximately 24 h of data, possessed a formal uncertainty of about 3 cm in all components. This average interferometry base-line vector was in good agreement with the conventional survey vector within the statistical range allowed by the combined uncertainties (3-4 cm) of the two techniques.

Ong, K. M.↗

Improved gravity field and station-coordinate estimates from laser tracking data

Knowledge of the long-wavelength features of the geopotential and the geocentric coordinates of satellite-tracking stations is significantly improved by the use of precision satellite tracking with lasers. Tracking data on nine satellites are combined with terrestrial gravimetry to obtain a spherical-harmonics representation of the geopotential complete through degree and order 24. Laser tracking data are used to determine the coordinates of tracking stations. This coordinate system is referred to an inertial reference frame by use of camera observations and observations of deep-space probes. Resulting geodetic parameters provide better satellite ephemerides and a reference for analyzing satellite-to-sea-surface altimetry.

Gaposchkin, E. M.↗

Probabilistic and deterministic aspects of linear estimation in geodesy

Recent advances in observational techniques related to geodetic work (VLBI, laser ranging) make it imperative that more consideration should be given to modeling problems. Uncertainties in the effect of atmospheric refraction, polar motion and precession-nutation parameters, cannot be dispensed with in the context of centimeter level geodesy. Even physical processes that have generally been previously altogether neglected (station motions) must now be taken into consideration. The problem of modeling functions of time or space, or at least their values at observation points (epochs) is explored. When the nature of the function to be modeled is unknown. The need to include a limited number of terms and to a priori decide upon a specific form may result in a representation which fails to sufficiently approximate the unknown function. An alternative approach of increasing application is the modeling of unknown functions as stochastic processes.

Dermanis, A.↗

The 1974 Ethiopian rift geodimeter survey

The field techniques and methods of data reduction for five successive geodimeter surveys in the Ethiopian rift valley are enlarged upon, with the considered conclusion that there is progressive accumulation of upper crustal strain, consonant with on-going rift extension. The extension is restricted to the Quaternary volcanotectonic axis of the rift, namely the Wonji fault belt, and is occurring at rates of 3 to 6 mm/yr in the northern sector of the rift valley. Although this concurs with the predictions of platetectonic analysis of the Afar triple junction, it is considered premature to endorse such a concurrence on the basis of only 5 years of observations. This is underlined by the detection of local tectonic contractions and expansions associated with geothermal and gravity anomalies in the central sector of the rift valley. There is a hint of a component of dextral slip along some of the rift-floor fault zones, both from geological evidence and from the strain patterns detected in the present geodetic surveys.

Mohr, P.↗

The gravity field of Jupiter

Preliminary analysis of two-way Doppler data from Pioneers 10 and 11 has provided the first detailed model of the Jovian gravity field. A review of the determination of the zonal harmonic coefficients through the sixth degree is presented, and the results are used to derive a number of geodetic parameters in the atmospheric region of the planet. On a level surface at a pressure of one bar, the net acceleration due to gravity is found to vary from a maximum of 2707 cm/sec squared at the poles to a minimum of 2322 cm/sec squared at the equator. The large dynamical flattening at the one-bar level produces a significant deviation of the local vertical from the Jovicentric radius vector. The angular difference is as much as 3.83 degrees of arc in the high temperature zones of the planet. These considerations are important for the accurate modeling of the atmosphere of Jupiter and for the interpretation of occultation data.

Anderson, J. D.↗

Sensitivity analysis of short-arc station coordinate determinations from range data

The accurate determination of the geocentric coordinates of a tracking station is essential for most geodetic and geophysical satellite applications. Since most of these satellites are close to the earth, the geopotential model is a dominant source of error which significantly influences station coordinate determinations. Other sources, such as GM error and drag, also influence the accuracy of the station coordinate determination. One technique for reducing the effect of these errors is to use short-arcs consisting of a few passes of the satellite over the tracking station. This paper analyzes the sensitivity of short-arc station coordinate estimates to various errors in the physical model, to the number of observations, and to the station-satellite geometry using simulated as well as real data.

Schutz, B. E.↗

On the interpretation of least squares collocation

A demonstration is given of the strict mathematical equivalence between the least squares collocation and the classical minimum variance estimates. It is shown that the least squares collocation algorithms are a special case of the modified minimum variance estimates. The computational efficiency of several forms of the general minimum variance estimation algorithm is discussed. It is pointed out that for certain geodetic applications the least square collocation algorithm may provide a more efficient formulation of the results from the point of view of the computations required.

Tapley, B. D.↗

A possible experiment with two counter-orbiting drag-free satellites to obtain a new test of Einstein's general theory of relativity and improved measurements in geodesy

In 1918, Lense and Thirring calculated that a moon in orbit around a massive rotating planet would experience a nodal dragging effect due to general relativity. We describe an experiment to measure this effect by means of two counter-orbiting drag-free satellites in polar orbit about the earth. For a 2-1/2 year experiment, the measurement should approach an accuracy of 1%. An independent measurement of the geodetic precession of the orbit plane due to the motion about the sun may also be possible to about 10% accuracy. In addition to precision tracking data from existing ground stations, satellite-to-satellite Doppler data are taken at points of passing near the poles to yield an accurate measurement of the separation distance between the two satellites. New geophysical information on both earth harmonics and tidal effects is inherent in this polar ranging data.

Van Patten, R. A.↗

GEOS 3 altimeter performance

GEOS 3 (Geodynamics Experimental Ocean Satellite) is the first satellite launched in the NASA Earth and Ocean Physics Applications Program and is designed to perform both geodetic and oceanographic missions. Aboard GEOS 3 is a radar altimeter for measuring the ocean surface characteristics and the spacecraft to ocean surface distance. Frequency of operation is 13.9 GHz, with two modes of operation - global or long pulse (200 nsec) mode, and intensive or short pulse (12 nsec) pulse mode. The discussion covers spacecraft and instrumentation, mission objectives, spacecraft performance, and altimeter data characteristics. Although the altimeter operation is planned only over water, the checkout of the altimeter system demonstrated that the global mode is capable of operating over land for which the terrain is not too mountainous. Sample altimeter sea surface and waveform measurements are presented.

Martin, C. F.↗

Improved ground truth geoid for the GEOS-3 calibration area

The purpose of this investigation is to develop methods and procedures are reported for computing a detailed geoid to be used as geodetic ground truth for the calibration and verification of GEOS-3 altimeter data. The technique developed is based on rectifying the best available detailed geoid so that the rectified geoid will have correct scale, orientation, shape and position with respect to the geocenter. The approach involved the development of a mathematical model based on a second degree polynomial, in rectangular Cartesian coordinates, describing the geoid undulations at the control stations. A generalized least squares solution was obtained for the polynomial which describes the variation of the undulation differences between the control stations geoid and the gravimetric geoid. Three rectified geoid were determined. These geoids correspond to three sets of tracking station data: (1) WFC/C-band data; (2) GSFC/C-band data; and (3) OSU-275 data. The absolute accuracy of these rectified geoids is linearly correlated with the uncertainties of the tracking station coordinates and, to a certain extent, with those of the detailed geoid being rectified.

Mourad, A. G.↗

Experiments for improved positioning by means of integrated Doppler satellite observations and the NNSS broadcast ephemeris

An effort to improve station position recovery using broadcast ephemeris in Doppler data reduction was studied. A comparison of precise and broadcast ephemerides, treating the former as the standard, yielded information about the state disturbance that can be associated with the broadcast ephemeris. Statistical information about the state disturbance was used with current observational data for improved position recovery. The rank deficiency problem encountered in the short arc geodetic adjustment procedure was analysed and it was deduced that the fundamental rank deficiency is six, scale information being derivable from the wavelength of transmission. Coordinate differences between stations coobserving a pass are estimable. The uncertainty of the broadcast ephemeris, now in the WGS72 system, was assessed. It was conservatively estimated that its positional uncertainty may vary between 19 to 26 m in-track, 15 to 20 m cross-track and 9 to 10 m in radial directions depending on the incidence of the epoch of observations in the interinjection period.

Arur, M. G.↗

Remote sensing applications to hydrologic modeling in the southern Sierra Nevada and portions of the San Joaquin Valley, volume 1

The author has identified the following significant results. Characteristics of LANDSAT MSS imagery present problems in using satellite radiation measurements to estimate the shortwave albedo of an alpine snow cover. Every 15 minute USGS quadrangle contains over 100,000 pixels which poses a computation problem if each pixel is to be evaluated individually. The sampling interval may be sufficiently great to mask some effects of terrain and vegetation on reflectance. Three frames of LANDSAT imagery are needed for complete coverage of the study area, yet less than one third of the area coverage from each frame covers an area of interest. Because of distortions inherent in the imagery, information regarding spacecraft altitude, attitude, and position must be statistically derived with respect to ground control points in the image whose geodetic locations are known. An inspection of shade points indicates that up to one third of the most heavily snow covered areas may saturate in bands 4 through 6. LANDSAT's 9 day repeat cycle is not optimum for snow cover reflectance modeling because the most pronounced changes in albedo occur most nearly following a new snowfall. Such a snowfall, occurring between overpasses, is inadequately represented by extrapolation from the previous overpasses.

Dozier, J.↗

A proposed test area for the spaceborne geodynamic ranging system

Precise geodetic measurements are proposed in which an orbiting laser obtains intersite distance between retroreflectors 25 to 100 km apart on the ground. The recommended area is a rectangle 200 by 400 km in southern California and adjacent Nevada, trending northeast. It includes the entire width of the San Andreas fault zone, the Garlock fault, the thrust faults of the Transverse Ranges, and the active strike-slip faults of the Mojave Desert.

Lowman, P. D., Jr.↗

High-precision laser distance measurement in support of lunar laser ranging at Haleakala, Maui, 1976-1977

The Hawaii Institute of Geophysics has implemented a comprehensive geodetic-geophysical support program to monitor local and regional crustal deformation on the island of Maui. Presented are the actual laser-measured line lengths and new coordinate computations of the line terminals, and the internal consistency of the measured line lengths is discussed. Several spacial chord lengths have been reduced to a Mercator plane, and conditioned adjustments on that plane have been made.

Berg, E.↗

Determining crustal strain rates with spaceborne geodynamics ranging system data. 1: Baseline analysis

A satellite-borne laser ranging system is proposed that is capable of making highly precise geodetic measurements over baselines ranging from a few tens of kilometers to several hundred kilometers. The precision with which crustal strain rates are derived from measurements made with this system is analyzed by using simple site configurations, intersite distances of about 25-70 kilometers, and measurement programs ranging from a few years to fifteen years. It is concluded that precisions of several parts in 10 to the 9th power per year are achievable. Compared to the expected shear strain rates of about 7 x 10 to the minus 7th power yr/1, this produces very favorable signal-to-noise ratios.

Cohen, S. C.↗

On least squares collocation

It is shown that the least squares collocation approach to estimating geodetic parameters is identical to conventional minimum variance estimation. Hence, the least squares collocation estimator can be derived either by minimizing the usual least squares quadratic loss function or by computing a conditional expectation by means of the regression equation. When a deterministic functional relationship between the data and the parameters to be estimated is available, one can implement a least squares solution using the functional relation to obtain an equation of condition. It is proved the solution so obtained is identical to what is obtained through least squares collocation. The implications of this equivalance for the estimation of mean gravity anomalies are discussed.

Argentiero, P. D.↗

Research in support of the EODAP validation program and solid earth geophysics

A validation program to verify that geodetic space techniques can measure intersite distances of several hundred to several thousand kilometers and polar motion, both with a precision of about 5 cm is described. Laser data were analyzed using a new analytical approach "scalar translocation." It was found that this approach can give geodynamic information and that the method is promising and can be used on a variety of satellites with data of different accuracy.

Gaposchkin, E. M.↗

Two hundred years of flight in America: A bicentennial survey

The first recorded balloon ascension in America took place on June 19, 1784, when an unmanned balloon was raised in a public demonstration at Bladensburg, Maryland. On June 24, 1784, a thirteen-year-old boy ascended in the same balloon. The history of actual flight during the nineteenth century was entirely concerned with balloons except for several gliders and models leading to the coming of the airship and the aircraft. The history of practical flight in America begins in the twentieth century. The described developments related to aerostatics are concerned with balloons, rigid airships, and blimps. In a review of the evolution of aeronautics, attention is given to general aviation and its search for a market, trends in military aeronautics, and commercial aviation. It is pointed out that American air transport had its birth on New Year's Day, 1914, at Tampa Bay, Florida. The evolution of astronautics during the period from 1957 to 1976 is also examined, taking into account scientific satellites, the Apollo project, the exploration of the planets with the aid of unmanned spacecraft, strategic reconnaissance satellites, missile alarm satellites, instrumental satellites for detecting nuclear and thermonuclear explosions, weather satellites, communications satellites, and earth resource survey and geodetic satellites.

Emme, E. M.↗