Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “functional groups”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Effect of confined space reduction of graphite oxide followed by sulfur doping on oxygen reduction reaction in neutral electrolyte

We thermally reduced graphite oxide within the confined space of commercial silica gel, and then removed the matrix. The modified graphite oxide was treated with hydrogen sulfide at 800 °C. The treatment applied results in a specific porous texture and high hydrophobicity of the surface. 3 at.% sulfur was introduced, mainly as thiophenic groups and sulfur in aromatic rings. The reduced GO and sulfur doped was evaluated as oxygen reduction catalysts in neutral electrolytes. Even though both materials show the strong catalytic activity, the results indicate that more electrons take part in oxygen reduction reaction on reduced GO than on its sulfur modified counterpart. The high activity of our materials is linked to oxygen and surface functional groups incorporated to the graphene structure, to the high degree of surface hydrophobicity and to the specific texture consisting of micro and mesopores (replicate of silica porosity).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of reaction atmosphere on structural and optical properties of hexagonal molybdenum oxide (h-MoO{sub 3})

The present work aims to synthesize single phase h-MoO{sub 3} nanocrytals by chemical precipitation method exposed under different reaction atmospheres. The reaction atmosphere have been successfully tuned as air, nitrogen and argon and studied its effects on structural, functional, morphology and optical properties by using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and diffuse reflectance spectroscopy (DRS) measurements. The XRD result indicates that the sample exhibits characteristic hexagonal phase of MoO{sub 3}. The crystallite size is estimated by well known Scherrer’s method. The crystallite size is relative small in the case of sample prepared at argon atmosphere. The functional groups such as Mo-O, N-H and O-H are identified from FT-IR spectroscopy. The particle exhibits rod like morphology with perfect hexagonal cross-section. The optical absorption observed at 420-450 nm corresponds to fundamental optical absorption by h-MoO{sub 3}. The band gap values are estimated using Kublka-Munk (K-M) function and found to be 2. 87 eV, 2.93 eV and 2.97 eV for samples synthesized under air, nitrogen and argon, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quality carbon fibers from fractionated lignin

The application of lignin carbon fibers was hindered by their low quality and mechanical performance. We addressed this challenge by developing a new approach to fractionate and modify lignin to produce quality carbon fibers using an enzyme-mediator system, which derives lignin fractions with different molecular weights, functional groups, and interunitary linkages. The fractionated lignin in general improves the miscibility and spinnability of lignin. In particular, the insoluble lignin fraction renders carbon fibers with a significantly improved turbostratic carbon structure as revealed by XRD and Raman spectroscopy. The improvement in the carbon structure leads to the significantly improved elastic modulus. The results suggest that higher molecular weights, less –OH groups, and more linear structures may contribute to the improved crystallization and mechanical performance of lignin carbon fibers. Finally, the technical breakthrough produces lignin-based carbon fibers with a similar elastic modulus to commercial carbon fibers for the first time, and paves the path for replacing PAN with lignin for producing quality carbon fibers.

Enzymatic fractionation↗

Impact of secondary salts, temperature, and pH on the colloidal stability of graphene oxide in water

The stability of graphene oxide (GO) in water is extremely relevant because of its application as an adsorbent material, as well as for its fate and behavior in the environment. Zeta potential was used to study the effect of secondary salts (carbonate, sulfate, and phosphate), temperature (20 to 60 °C), and pH (5 to 9) on the stability of six different GOs produced from natural, synthetic, and amorphous graphite—with and without the use of attrition milling. Generally, GOs produced with attrition-milled graphites had lower ζ-potentials than their unmilled counterparts because of their smaller particle sizes and higher concentration of oxygen-containing functional groups. It was observed that GO produced from graphite and synthetic graphite had ζ-potential values lower than –30 mV, even at 30 °C. However, it was observed that all the GOs studied were unstable in the presence of carbonate and sulfate salts at concentrations between 170 and 1695 mg L –1 , as they reached a ζ-potential of –4.1 mV. Density-functional theory electronic structure calculations suggested that the instability of GO in the presence of carbonate and sulfate was caused by the abstraction of a proton resulting in interaction energies E int of 28.3 and 168.9 kJ mol –1 , respectively. Our results suggest that temperatures above 30 °C, as well as carbonate and sulfate salts at concentrations relevant to arid and semi-arid regions, could promote the formation of agglomerates of GO, thus limiting its use and mobility in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Final Project Report for project titled "Fluoroalkylphosphonic-acid-based proton conductors"

The overall objective of this research was to create new proton-conducting polymer electrolytes for use in energy conversion devices including hydrogen fuel cells that could operate at high temperatures (95-130 C) and under low relative humidity (< 50% RH) conditions. The new polymers were based on the fluoroalkylphosphonic and phosphinic acid (FPA) groups (see illustration below) which offer prospects for rapid proton transport by a proton-hopping mechanism similar to that which operates in phosphoric acid, a well-known proton-transporting electrolyte that is used in a class of hydrogen fuel cells that work well under the conditions noted above and are already commercially successful. The two specific project objectives were as follows: (1) synthesize and characterize new proton-conducting electrolytes based on the fluoroalkylphosphonic and phosphinic acid (FPA) functional groups; and (2) create and apply new computer models to study protonic conduction in FPA-based electrolytes. The project was successful in creating the desired polymer electrolytes and also a series of molecular model compounds which were used to study proton transport in FPA electrolytes in general. Computer models were created to study both structure and proton-transport dynamics in the electrolytes, particularly the molecular model compounds. Rapid proton transport by a hopping mechanism was found in many of the model compounds and correlations with transport rates with molecular structure were identified. Several polymeric analogs of FPA model compounds were prepared and studied, however FPA-based polymeric materials having very high protonic conductivities under either wet or dry conditions were not obtained. Several possible reasons for the failure of polymeric materials to exhibit the expected high protonic conductivities were identified, including a failure of the polymers to adopt the phase-separated secondary structure/morphology necessary for high proton conductivity, and an unexpected polymer crosslinking effect of acidic groups having two P-OH groups. The project has lent insight into how FPA groups transport protons in both liquid and polymeric forms, which provides guidance to future efforts to design and prepare future generations of proton-conducting polymer electrolytes for hydrogen fuel cells and other types of electrochemical energy conversion and storage devices.

08 HYDROGEN↗

Uncovering the role of boronic acids and boroxines in the catalytic hydroboration of alkenes

The catalytic hydroboration of alkenes with pinacolborane (HBpin) represents a valuable yet challenging transformation in main-group catalysis, furnishing alkyl pinacol boronic esters of broad synthetic utility. In this article, we demonstrate that simple, commercially available aryl and alkyl boronic acids and their corresponding boroxines act as efficient pre-catalysts for the anti-Markovnikov hydroboration of terminal alkenes with HBpin under solvent-free conditions. In particular, 3,4,5-trifluorophenylboronic acid promotes hydroboration at low loadings, displays broad functional-group tolerance, and operates under operationally simple conditions. Detailed 11 B NMR spectroscopic studies reveal that boronic acids and boroxines are not the catalysts themselves, instead they react with HBpin to generate the transient species RBH 2 ·BH 2 R and B 2 H 6 , which serve as catalytically active intermediates. These species rapidly undergo alkene hydroboration followed by transborylation with HBpin to regenerate the catalytically competent hydridoboranes and release the alkyl pinacol boronic ester products. At elevated temperature and in the absence of alkene substrate, B 2 H 6 undergoes thermal fragmentation into the catalytically inactive borane clusters B 5 H 9 and B 10 H 14 . Limitations in the hydroboration of internal alkenes are traced to the formation of sterically congested trialkylboranes that do not undergo transborylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermally activated nucleation and growth of cobalt and nickel oxide nanoparticles on porous silica

Integrating mesoscale to the molecular level understanding of nanoparticle nucleation phenomena can drive the bottom-up synthesis approach for target applications. In this work, we studied the thermal evolution of cobalt and nickel oxide nanoparticle structural phases on porous silica host from over wide spatial scale using multi-modal analysis involving scanning transmission electron microscope (STEM), X-ray absorption (XANES) and nuclear magnetic resonance (NMR) spectroscopies along with density functional theory (DFT) based calculations. The TEM analysis reveals thermally activated nanoparticle clustering and subsequent interaction with the porous host material. The Co and Ni K-edge XANES spectra revealed the evolution from metal hydroxide to metal oxide and subsequently metal silicate composites with calcinination temperature. 29 Si NMR analysis revealed the role of surface functional groups of silica host for silicate composite formation which is corroborated by DFT studies.

36 MATERIALS SCIENCE↗

Interface and Pore Confinement Effects in the Pyrolysis of Phenethyl Phenyl Ether

Lignin, a complex biopolymer found in vascular plants and as the byproduct of pulping, is anticipated to be one of the next generation s resources for fuel and chemical feedstocks. To reach the point where lignin can efficiently be utilized, the products from its pyrolysis must be controlled, thus key factors in understanding what will maximize product yields and promote product selectivity must be investigated. We approach this problem through a systematic investigation starting with the simplest model compound that represents the dominant aryl glycerol--aryl ether interunit linkage in lignin, phenethyl phenyl ether, PhCH2CH2OPh (PPE). The decomposition of PPE at 375 C in the gas and solution phases is now well understood, and occurs through a free-radical chain pathway involving competitive hydrogen abstraction at the  or carbon, which leads to different products and is described as the - product selectivity. This selectivity not only depends on relevant substituents, but it is also sensitive to interactions with metal oxide surfaces. Furthermore, covalent confinement in a nanoporous silica, hydrogen bonding interactions with the surface, and changes in the local environment with co-attached spacer molecules all can influence the product selectivity significantly. Here we will describe the impact of pore confinement and pore size, metal oxide surface acidity, hydrogen bonding of oxygen functional groups at the interface, and the influence of organic molecular structure at the interface on the pyrolysis product selectivity of this important lignin linkage.

08 HYDROGEN↗

Sooting tendencies of terpenes and hydrogenated terpenes as sustainable transportation biofuels

Terpenes are a diverse group of molecules that are synthesized by plants and microorganisms through combining units of isoprene (2-methyl-1,3-butadiene). They typically contain rings and methyl branches, which gives them high energy densities and low freezing points and makes them appealing candidates for sustainable transportation biofuels. Between the original biosynthesis and upgrading options such as hydrogenation, they have a large degree of freedom of structures, e.g., different carbon skeletons, positions of double bonds, and functional groups. Therefore, structure-property data is needed to downselect potential fuel candidates. Here, we measured the sooting tendencies of 17 C10 monoterpenes and 7 of their hydrogenated analogues. The hydrogenated compounds were custom synthesized, so the quantities were too small for conventional smoke point measurements. Thus, the sooting tendencies were quantified with yield sooting index (YSI), which is based on the soot yield in a fuel-doped non-premixed methane flame. Derived smoke points (DSPs) were estimated from a correlation between YSI and smoke point for other hydrocarbons. The YSI of terpenes and their derivatives varies widely from 85.6 to 248.5. The YSI follows the trend: terpenes > dihydroterpenes > tetrahydroterpenes. The DSPs of all the tetrahydroterpenes and some dihydroterpenes are higher than that of a Jet-A fuel sample, suggesting that they offer soot reduction benefits. Further, the YSIs depend strongly on molecular structure; for example, α-pinene and β-pinene have identical carbon skeletons and differ only in the position of one carbon-carbon double bond, but the YSI of α-pinene is 34% higher than that of β-pinene. Detailed decomposition analysis via density functional theory (DFT) suggests that compared with β-pinene, α-pinene requires fewer steps to form the first aromatic ring and the process is more thermodynamically favorable. The YSI difference between the pinenes is mainly affected by the identity of the products from the dominant decomposition pathways.

09 BIOMASS FUELS↗

Structured for success: conjugated polymer binders with tailored composition and architecture for lithium-ion batteries

Conjugated polymer binders are replacing conventional binders in lithium-ion batteries. Herein, we examine how molecular engineering and hierarchical nanostructuring govern binder functionality and electrochemical performance. Lithium-ion batteries (LIBs) are the leading energy storage technology, yet enhancing their energy density and cycle life remains critical. Significant progress has been made in high-capacity anodes and high-voltage cathodes, but their performance is hindered by electrode degradation, where it is related to the behaviors of binders at the surface and interface. Conventional non-conductive binders like poly(vinylidene difluoride) (PVDF), combined with conductive additives, often fail to maintain electrical pathways under repeated volume changes. Alternatively, conjugated polymer binders have emerged as a superior alternative, simultaneously offering intrinsic conductivity, mechanical flexibility, and strong adhesion through π-conjugated backbones and functional groups. Their tunable molecular structure enables efficient electron/ion transport while mitigating electrode cracking. Additionally, the development of hierarchically ordered nanostructures in conjugated polymer binder can further enhance their electrochemical performance. This review examines the design principles of conjugated polymer binders, focusing on molecular engineering and nanostructural control to optimize their performance in high-loading electrodes, such as silicon-based anodes. By addressing key challenges in binder functionality, these advanced materials pave the way for next-generation high-energy-density LIBs.

Jin, Xiuyu↗

Enhancing Pore-Environment Complexity Using a Trapezoidal Linker: Toward Stepwise Assembly of Multivariate Quinary Metal–Organic Frameworks

Multicomponent metal–organic frameworks (MOFs) promise the precise placement of synergistic functional groups with atomic-level precision, capable of promoting fascinating developments in basic sciences and applications. However, the complexity of multicomponent systems poses a challenge to their structural design and synthesis. Herein, we show that linkers of low symmetry can bring new opportunities to the construction of multicomponent MOFs. A carbazole-tetracarboxylate linker of C s point group symmetry was designed and combined with an 8-connected Zr 6 cluster to generate a low-symmetry MOF, PCN-609. PCN-609 contains coordinatively unsaturated Zr sites arranged within a lattice with three crystallographically distinct pockets, which can accommodate linear linkers of different lengths. Sequential linker installation was carried out to postsynthetically insert three linear linkers into PCN-609, giving rise to a quinary MOF. At last, functionalization of each linker from the quinary MOF system creates multivariate pore environments with unprecedented complexity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Al-alkyls as acceptor dopant precursors for atomic-scale devices

Atomically precise ultradoping of silicon is possible with atomic resists, area-selective surface chemistry, and a limited set of hydride and halide precursor molecules, in a process known as atomic precision advanced manufacturing (APAM). It is desirable to expand this set of precursors to include dopants with organic functional groups and in this work we consider aluminium alkyls, to expand the applicability of APAM. We explore the impurity content and selectivity that results from using trimethyl aluminium and triethyl aluminium precursors on Si(001) to ultradope with aluminium through a hydrogen mask. Comparison of the methylated and ethylated precursors helps us understand the impact of hydrocarbon ligand selection on incorporation surface chemistry. Combining scanning tunneling microscopy and density functional theory calculations, we assess the limitations of both classes of precursor and extract general principles relevant to each.

36 MATERIALS SCIENCE↗

Characteristics of biochar: Microchemical properties

Biochars, being derived from a variety of biological feedstocks that have been thermally degraded under a range of conditions, exhibit a correspondingly large range in composition and chemistry. Due in part to the somewhat chaotic nature of the thermal process itself, this chemical heterogeneity extends to the microscopic scale even within a single biochar. Thus, in the strictest sense, each biochar made under a particular feedstock/process combination presents a unique mixture of phases and microenvironments that gives rise to a unique set of chemical properties. In some respects, the chemical complexity of biochars rivals that of incipient soils. In this chapter we focus on the chemical complexity of biochar as manifested primarily at a microscopic and molecular scale. We start by describing the biochar-formation process and how this influences the composition and nature of the solid phases, entrained oils, and their organization at the microscopic level. We then proceed to discuss the range of surface chemistries exhibited by biochars in terms of functional groups and electrochemical properties. We conclude with a discussion of the influence of these properties on the sorption of aqueous species at biochar surfaces.

54 ENVIRONMENTAL SCIENCES↗

Poly(lactic acid) Toughening through Chain End Engineering

The intrinsic brittleness of poly(lactic acid) (PLA) has hindered its widespread use in many structural applications. Various strategies have been developed to toughen PLA; however, most of the methods lead to a trade-off in strength or modulus. In this study, a chain end engineering strategy was developed to toughen PLA via an industry-friendly melt processing method. Green acids with multifunctional groups, such as 1,2,3,4-butanetetracarboxylic acid (BTCA), were used to modify PLA chain ends/tails via a melt reaction. We report a remarkable improvement in toughness (16×) was achieved by the addition of a minimal amount of BTCA (0.5%). At the same time, the toughened PLA samples maintained the tensile strength and Young’s modulus of neat PLA, suggesting a unique toughening mechanism that is different from the plasticizing effect. Other acid–based modifiers with different numbers of functional groups were also studied in this work. To understand the toughening, we propose a chain end engineering picture that can improve the toughness via a reduction in the number density of chain ends or defects of entanglement and the formation of long-branch topological structures. This study demonstrates a unique and cost-effective strategy for toughening PLA via scalable melt reaction without sacrificing other mechanical properties of PLA, potentially broadening the applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of the Bastnäsite (001) Surface by Crystal Truncation Rod X-ray Diffraction and Ab Initio Molecular Dynamics: Implications for Separations of a Rare Earth Ore Mineral

Bastnäsite ((Ce,La)FCO 3 ) is the primary mineral source of light rare earth elements, but its surface structure is not well understood. This presents a major challenge in improving beneficiation strategies. In this work, a synergistic combination of X-ray scattering and ab initio molecular dynamics (AIMD) was used to gain atomistic insight into the interfacial structure of bastnäsite. Surface X-ray scattering was used to measure crystal truncation rods (CTRs) of the bastnäsite (001) surface, a significant crystal face with a previously unknown termination. The best-fit atomic-scale model of the CTR data features a carbonate layer at the surface, which is stabilized by the relaxation of carbonate groups from their bulk structural positions. AIMD simulations predict similar surface relaxations, which are shown to be influenced by the protonation of oxygen atoms at the surface. Evidence of ordered water at the interface is also observed in the best-fit model and AIMD simulations. Further, the presence of a carbonate layer at this dominant crystal surface is significant for improving separation technologies because most commonly used ligands utilize anionic functional groups to chelate metal cations at particle surfaces. Without modification, anionic ligands are expected to have poor affinity for the carbonate-terminated (001) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic liquid-functionalized mesoporous sorbents and their use in the capture of polluting gases

A composite structure for capturing a gaseous electrophilic species, the composite structure comprising mesoporous refractory sorbent particles on which an ionic liquid is covalently attached, wherein said ionic liquid includes an accessible functional group that is capable of binding to said gaseous electrophilic species. In particular embodiments, the mesoporous sorbent particles are contained within refractory hollow fibers. Also described is a method for capturing a gaseous electrophilic species by use of the above-described composite structure, wherein the gaseous electrophilic species is contacted with the composite structure. In particular embodiments thereof, cooling water is passed through the refractory hollow fibers containing the IL-functionalized sorbent particles in order to facilitate capture of the gaseous electrophilic species, and then steam is passed through the refractory hollow fibers to facilitate release of the gaseous electrophilic species such that the composite structure can be re-used to capture additional gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic properties of graphene-single crystal diamond heterostructures

Single crystal diamond has been used as a substrate to support single layer graphene grown by chemical vapor deposition methods. It is possible to chemically functionalise the diamond surface, and in the present case H-, F-, O-, and N-group have been purposefully added prior to graphene deposition. The electronic properties of the resultant heterostructures vary strongly; a p-type layer with good mobility and a band gap of ∼0.7 eV is created when H-terminated diamond layers are used, whilst a layer with more metallic-like character (high carrier density and low carrier mobility) arises when N(O)-terminations are introduced. Since it is relatively easy to pattern these functional groups on the diamond surface, this suggests that this approach may offer an exciting route to 2D device structures on single layer graphene sheets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗