Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Precipitation observed by the airborne advanced microwave moisture sounder (AMMS)

Airborne radiometric measurements at frequencies near 92 GHz and 183 GHz were conducted over two precipitation events near Wallops Island, Virginia during February, 1986. The measured brightness temperatures are compared with those from calculations to estimate the snowfall and rainfall rates for both events. The estimated rates over water surface are within a factor of two of those derived from the concurrent measurements by the SPANDAR radar at the NASA Wallops Flight Facility. These estimated rates, however, suggest that both snowfall events are light and close to the threshold of radiometric detection especially over land surface. Observations of additional snowfall events with lower frequency channels are needed to demonstrate the approach and to account for cloud effects.

Chang, A. T. C.↗
NASA NTRS1991

A conceptual approach for noncontact calorimetry in space

A concept is developed and described which allows to measure the heat capacity and the effective thermal conductivity of stable and undercooled liquid metals and alloys in an electromagnetic levitation apparatus. A proposal is made to use an ac pulse heating method which is used nowadays as a standard technique for precision measurement of low-temperature heat capacities. The ideal process parameters, including the drop diameter D, temperature T, and frequency of measurement omega, can be optimized when the following relations hold for the external and internal relaxation time constants tau-1 and tau-2, respectively: omega(tau-1) greater than 10 and omega(tau-2) less than 0.1. Then, heat capacity data can be obtained with an accuracy of better than 1 percent with D about 5 to 10 mm, T between 1200 and 1800 K, and omega between 0.1 and 1 Hz for typical metals and alloys.

Fecht, H. J.↗
NASA NTRS1997

Screech Tones of Supersonic Jets from Bevelled Rectangular Nozzles

It is known experimentally that an imperfectly expanded rectangular jet from a thin-lip convergent nozzle emits only a single dominant screech tone. The frequency of the screech tone decreases continuously with increase in jet Mach number. However, for a supersonic jet issued from a bevelled nozzle or a convergent-divergent nozzle with straight side walls, the shock cell structure and the screech frequency pattern are fairly complicated and have not been predicted before. In this paper, it is shown that the shock cell structures of these jets can be decomposed into waveguide modes of the jet flow. The screech frequencies are related to the higher-order waveguide modes following the weakest-link screech tone theory. The measured screech frequencies are found to compare well with the predicted screech frequency curves.

Tam, Christopher K. W.↗
NASA NTRS1976

Practical considerations for the design of two-element duct liner noise suppressors

The results of analytical and experimental design studies for two-segment treatment configurations in rectangular ducts with mean flow are presented. The practical significance of the design optimization method, executed at a single frequency for measured modal input, is considered in the light of sensitivity to variations in wall impedance components and source modal content. The results of analytical parametric studies of the effects of frequency and segment length ratio are presented. The importance of designing for a measured modal content and the importance of the order of the liners in providing the multi-element suppression enhancement effects are demonstrated.

Kraft, R. E.↗
NASA NTRS1984

Measuring and Modeling of the Dielectric Properties and Attenuation of Vegetation

The dielectric properties of vegetation material--primarily agricultural plants--as a function of moisture content and microwave frequency was measured and used to develop dielectric mixing models for the vegetation-water mixture. A model for the loss factor of a vegetation canopy was also developed. During the first phase of this investigation, three waveguide transmission systems covering from 1 to 2-GHz, from 3.5 to 6.5-GHz, and from 7.5 to 8.5-GHz bands were constructed and calibrated. By measuring the magnitude and phase of the field transmission coefficient of a given sample, it was possible to calculate the real and imaginary parts of the complex dielectric constant of the sample. Measurements were made for numerous samples of leaves and stalks of wheat and corn, and for wheat heads. Also, dielectric measurements were made of the liquid included in the vegetation material after extraction by mechanical means. The propagation loss is more than an order of magnitude greater than had previously been assumed. Various types of dielectric mixing models were investigated in terms of the available data, and a propagation model was developed and evaluated against direct canopy attenuation measurements. The canopy measurements were made by transmitting a signal from a radar antenna mounted atop a truck-mounted boom, and using a small antenna mounted on a rail beneath the canopy to receive it.

Ulaby, F. T.↗
NASA NTRS1985

Evidence of scattering effects on the sizes of interplanetary Type III radio bursts

An analysis is conducted of 162 interplanetary Type III radio bursts; some of these bursts have been observed in association with fast electrons and Langmuir wave events at 1 AU and, in addition, have been subjected to in situ plasma parameter measurements. It is noted that the sizes of burst sources are anomalously large, compared to what one would anticipate on the basis of the interplanetary plasma density distribution, and that the variation of source size with frequency, when compared with the plasma frequency variation measured in situ, implies that the source sizes expand with decreasing frequency to fill a cone whose apex is at the sun. It is also found that some local phenomenon near the earth controls the apparent size of low frequency Type III sources.

Steinberg, J. L.↗
NASA NTRS1983

A prospectus on airborne laser mapping systems

Airborne laser systems have demonstrated enormous potential for topographic and bathymetric mapping. Both profiling and scanning systems have been evaluated for terrain elevation mapping, stream valley cross-section determination, and nearshore bottom profiling. Performance of the laser systems has been impressive and for some applications matches current operational accuracy requirements. Determining the position of individual laser measurements remains a constraint for most applications. Laser technology constrains some terrain and bathymetric applications, particularly for water penetration and frequency of measurements for high-spatial resolution over large areas.

Link, L. E.↗
NASA NTRS1992

Monitoring Polymer Curing Via Electromagnetic Impedance

New nondestructive in-situ electromagnetic-impedance measurement technique senses cure-processing properties of high-temperature, high-performance thermostat and thermoplastic resins. Continuous frequency-dependent measurement and analysis performed during curing cycle. Monitors and measures molecular properties of polymeric resin in liquid and solid states. Applications include nondestructive means for evaluation of materials, determination of "window" boundaries of curing cycles of thermoplastics and thermoset resins, and for online, closed-loop control of curing cycles.

Freeman, William T.↗
NASA NTRS1991

Dynamic behavior of liquid sheets

An experiment was conducted to study the aerodynamic instability of liquid sheets issuing from a two-dimensional air-assisted nozzle. Detailed measurements of the frequency of oscillation of the liquid sheet have been made. The measured vibrational frequencies were then correlated with the resulting spray angle. It was shown that the liquid sheet oscillations are dynamically similar to that of hard spring systems. For each air pressure, three distinct modes of breakup are distinguished. At low liquid flow rates, both the sinusoidal and the dilational modes are superimposed on the liquid sheet. With a further increase in liquid flow rate, the liquid sheet oscillations mainly become of the dilational type. It was also shown that the effect of introducing air in the nozzle is similar to the effect of inducing forced vibrations on the nozzle jaws. Thus, for each air flow rate, there is a specific vibration frequency for the nozzle. The frequency of these vibrations is proportional to the air velocity. As the liquid sheet natural frequency approaches that of the nozzle, resonance is established. At resonance, the maximum spray angle is achieved.

Mansour, Adel↗
NASA NTRS1999

Rossi X-Ray Timing Explorer Observations of the Anomalous Pulsar 4U 0142+61

We observed the anomalous X-ray pulsar 4U 0142+61 using the Proportional Counter Array on board the Rossi X-Ray Timing Explorer in 1996 March. The pulse frequency was measured as v = 0.11510039(3) Hz, with an upper limit of absolute value of the first derivative of v <= 4 x 10(exp -13) Hz/s on the short-term change in frequency over the 4.6 day span of the observations. A compilation of all historical measurements showed an overall spin-down trend with slope first derivative of v = -3.0 +/- 0.1 x 10(exp -14) Hz/s. Searches for orbital modulations in pulse arrival times yielded an upper limit of a(sub x) sin i approximately < 0.26 lt-s (99% confidence) for the period range 70 s to 2.5 days. These limits combined with previous optical limits and evolutionary arguments suggest that 4U 0142+61 is probably not a member of a binary system.

Wilson, Colleen A.↗
NASA NTRS1973

SAFE - Six axis frequency evaluation of a motion simulator.

SAFE is a digital computer program used to check the response of an aircraft motion simulator. SAFE drives each axis of the simulator near its acceleration, velocity and position limits, recording the simulator motions for comparison with nominal responses. SAFE also drives up to six axes at once to measure the frequency response and noise levels of each axis. Together these two measurements provide a sensitive check of the entire motion system, yet they can be completed in less than ten minutes.

Shirley, R. S.↗
NASA NTRS2014

A Novel Multimode Waveguide Coupler for Accurate Power Measurement of Traveling Wave Tube Harmonic Frequencies

This paper presents the design, fabrication and test results for a novel waveguide multimode directional coupler (MDC). The coupler fabricated from two dissimilar waveguides is capable of isolating the power at the second harmonic frequency from the fundamental power at the output port of a traveling-wave tube (TWT). In addition to accurate power measurements at harmonic frequencies, a potential application of the MDC is in the design of a beacon source for atmospheric propagation studies at millimeter-wave frequencies.

harmonic frequencies↗
NASA NTRS2021

Isolation in Compact Magnetically-loaded Tri-axial Magneto-quasistatic Detectors

A navigation technique using quasistatic magnetic field had been an active R\&{}D topic for a while. One parameter to measure the performance of such technique is to quantify the error between calculated and actual position across a range. Several factors could contribute to the overall range error, among which is the field receiving antenna. This paper describes a laboratory experiment conducted to measure the frequency response of the antenna to understand how well it can isolate field component orthogonal to each coil's axis. The measurements were used to infer what range error could the antenna contribute to the overall technique.

Peng, Nicholas S↗
NASA NTRS1990

Electro-optic network analyzer

The bandwidth of frequency domain measurement methods of electrical signals has usually been far greater than the bandwidth of time domain methods. The primary limits of the time domain approach have been the 20 to 30 GHz bandwidth limit for electronic waveform acquisition instrumentation, and the lack of usable electrical pulse generators for excitation of a test device. The bandwidth of frequency domain network analysis appears to have reached a plateau of between 100 to 200 GHz, while time domain measurement have improved markedly in both bandwidth and sensitivity with the introduction of the pulsed laser based electro-optic sampling approach. Network analysis or the measurement of device scattering parameters provides information necessary to the design of electronic network such as high frequency amplifiers, mixers, and phase shifter. The bandwidth of frequency domain network analysis is currently being exceeded by the next generations of high frequency transistors and devices. Thus the electro-optic approach is a natural means of extending network analysis into the range above 100 GHz by employing time domain methods. In this approach, a suitable electrical excitation pulse is generated and propagated along a transmission line toward a test device. In the picosecond domain, laser driven photoconductive switches provide a unique method of generating electrical transients. Several materials were studied for generating short electrical pulses using photoconductive switches. The various semiconductive materials tested for photoconductive switching, and the electro-optic measurement technique used to characterize the material performance are described.

Jackson, Todd A.↗
NASA NTRS1999

Heart rate dynamics before spontaneous onset of ventricular fibrillation in patients with healed myocardial infarcts

The traditional methods of analyzing heart rate (HR) variability have failed to predict imminent ventricular fibrillation (VF). We sought to determine whether new methods of analyzing RR interval variability based on nonlinear dynamics and fractal analysis may help to detect subtle abnormalities in RR interval behavior before the onset of life-threatening arrhythmias. RR interval dynamics were analyzed from 24-hour Holter recordings of 15 patients who experienced VF during electrocardiographic recording. Thirty patients without spontaneous or inducible arrhythmia events served as a control group in this retrospective case control study. Conventional time- and frequency-domain measurements, the short-term fractal scaling exponent (alpha) obtained by detrended fluctuation analysis, and the slope (beta) of the power-law regression line (log power - log frequency, 10(-4)-10(-2) Hz) of RR interval dynamics were determined. The short-term correlation exponent alpha of RR intervals (0.64 +/- 0.19 vs 1.05 +/- 0.12; p <0.001) and the power-law slope beta (-1.63 +/- 0.28 vs -1.31 +/- 0.20, p <0.001) were lower in the patients before the onset of VF than in the control patients, but the SD and the low-frequency spectral components of RR intervals did not differ between the groups. The short-term scaling exponent performed better than any other measurement of HR variability in differentiating between the patients with VF and controls. Altered fractal correlation properties of HR behavior precede the spontaneous onset of VF. Dynamic analysis methods of analyzing RR intervals may help to identify abnormalities in HR behavior before VF.

Non-NASA Center↗
DOE OSTI2022

Gradient Field Detection Using Interference of Stimulated Microwave Optical Sidebands

Here, we demonstrate that stimulated microwave optical sideband generation using parametric frequency conversion can be utilized as a powerful technique for coherent state detection in atomic physics experiments. The technique has advantages over traditional absorption or polarization rotation-based measurements and enables the isolation of signal photons from probe photons. We outline a theoretical framework that accurately models sideband generation using a density matrix formalism. Using this technique, we demonstrate a novel intrinsic magnetic gradiometer that detects magnetic gradient fields between two spatially separated vapor cells by measuring the frequency of the beat note between sidebands generated within each cell. The sidebands are produced with high efficiency using parametric frequency conversion of a probe beam interacting with 87 Rb atoms in a coherent superposition of magnetically sensitive hyperfine ground states. Interference between the sidebands generates a low-frequency beat note whose frequency is determined by the magnetic field gradient between the two vapor cells. In contrast to traditional gradiometers the intermediate step of measuring the magnetic field experienced by the two vapor cells is unnecessary. We show that this technique can be readily implemented in a practical device by demonstrating a compact magnetic gradiometer sensor head with a sensitivity of 25 fT/cm/ √ Hz with a 4.4 cm baseline, while operating in a noisy laboratory environment unshielded from Earth’s field.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Dynamic stiffness modification by internal features in additive manufacturing

Dynamic stiffness, or the product of the modal stiffness and damping ratio, is an important consideration for the design of additively manufactured parts that will experience dynamic loading. Here, this paper describes a demonstration component which was designed and manufactured in two configurations using a metal wire arc additive process. The first configuration was an open channel structure, while the second contained a dynamic absorber in the internal cavity. Frequency response measurements of the two components showed a significant magnitude reduction for the modified component at the original open channel structure's natural frequency and an overall increase in dynamic stiffness. Polymer damping material was then added to further increase the dynamic stiffness.

Additive manufacturing↗