Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Temperature Dependence of the Mechanical Properties of Equiatomic Solid Solution Alloys with FCC Crystal Structures

We found that compared to decades-old theories of strengthening in dilute solid solutions, the mechanical behavior of concentrated solid solutions is relatively poorly understood. A special subset of these materials includes alloys in which the constituent elements are present in equal atomic proportions, including the high-entropy alloys of recent interest. A unique characteristic of equiatomic alloys is the absence of “solvent” and “solute” atoms, resulting in a breakdown of the textbook picture of dislocations moving through a solvent lattice and encountering discrete solute obstacles. Likewise, to clarify the mechanical behavior of this interesting new class of materials, we investigate here a family of equiatomic binary, ternary and quaternary alloys based on the elements Fe, Ni, Co, Cr and Mn that were previously shown to be single-phase face-centered cubic (fcc) solid solutions. The alloys were arc-melted, drop-cast, homogenized, cold-rolled and recrystallized to produce equiaxed microstructures with comparable grain sizes. Tensile tests were performed at an engineering strain rate of 10 -3 s -1 at temperatures in the range 77–673 K. Unalloyed fcc Ni was processed similarly and tested for comparison. The flow stresses depend to varying degrees on temperature, with some (e.g. NiCoCr, NiCoCrMn and FeNiCoCr) exhibiting yield and ultimate strengths that increase strongly with decreasing temperature, while others (e.g. NiCo and Ni) exhibit very weak temperature dependencies. Moreover, to better understand this behavior, the temperature dependencies of the yield strength and strain hardening were analyzed separately. Lattice friction appears to be the predominant component of the temperature-dependent yield stress, possibly because the Peierls barrier height decreases with increasing temperature due to a thermally induced increase of dislocation width. In the early stages of plastic flow (5–13% strain, depending on material), the temperature dependence of strain hardening is due mainly to the temperature dependence of the shear modulus. In all the equiatomic alloys, ductility and strength increase with decreasing temperature down to 77 K. Keywords

36 MATERIALS SCIENCE↗

Experimental and Computational Studies of the Production of 1,3-Butadiene from 2,3-Butanediol Using SiO2-Supported H3PO4 Derivatives

Silica-supported phosphoric acid and metal phosphate catalyzed 1,3-butadiene (BDE) production from 2,3-butanediol (2,3-BDO) was studied using experimental and computational techniques. The catalyst was initially tested in a continuous flow reactor using commercially available 2,3-BDO, leading to maximum BDE yields of 63C%. Quantum chemical mechanistic studies revealed 1,2-epoxybutane is a kinetically viable and thermodynamically stable intermediate, supported by experimental demonstration that this epoxide can be converted to BDE under standard reaction conditions. Newly proposed E2 and SN2' elementary steps were studied to rationalize the formation of BDE and all detected side-products. Additionally, using quantum mechanics/molecular mechanics (QM/MM) calculations, we modeled silica-supported phosphate catalysts to study the effect of the alkali metal center. Natural population analysis showed that phosphate oxygen atoms are more negatively charged in CsH2PO4/SiO2 than in H3PO4/SiO2. In combination with temperature-programmed desorption experiments using CO2, the results of this study suggest that the improved selectivity achieved when adding the metal center is related to an increase in the basicity of the catalyst.

butadiene↗

Accelerating dissipative particle dynamics simulations on GPUs: Algorithms, numerics and applications

We present a scalable dissipative particle dynamics simulation code, fully implemented on the Graphics Processing Units (GPUs) using a hybrid CUDA/MPI programming model, which achieves 10-30 times speedup on a single GPU over 16 CPU cores and almost linear weak scaling across a thousand nodes. A unified framework is developed within which the efficient generation of the neighbor list and maintaining particle data locality are addressed. Our algorithm generates strictly ordered neighbor lists in parallel, while the construction is deterministic and makes no use of atomic operations or sorting. Such neighbor list leads to optimal data loading efficiency when combined with a two-level particle reordering scheme. A faster in situ generation scheme for Gaussian random numbers is proposed using precomputed binary signatures. We designed custom transcendental functions that are fast and accurate for evaluating the pairwise interaction. The correctness and accuracy of the code is verified through a set of test cases simulating Poiseuille flow and spontaneous vesicle formation. Computer benchmarks demonstrate the speedup of our implementation over the CPU implementation as well as strong and weak scalability. A large-scale simulation of spontaneous vesicle formation consisting of 128 million particles was conducted to further illustrate the practicality of our code in real-world applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of CeO2 nanoparticles on viscoelastic properties of sludge: Role of extracellular polymeric substances

Highlights: • Steady shear flow and dynamic sweep tests were conducted for sludge rheology. • Less than 5 mg/L CeO{sub 2} NPs increased sludge flowability, being opposite to 20 mg/L. • The removal of EPSs weakened elastic and solid-like properties of sludge. • The removal of EPSs increased repulsive forces and reduced hydrophobic interaction. Cerium oxide nanoparticles (CeO{sub 2} NPs) affected the production of extracellular polymeric substances (EPSs), and thus might bring challenges for sludge pumping and mixing. In the present study, we investigated the rheological behavior of sludge before and after extraction of different EPSs fractions under various CeO{sub 2} NPs concentrations. It was found that the removal of loosely bound EPSs (LB-EPSs) could affect the shear stress (τ) and apparent viscosity (η), and the changes were dependent on CeO{sub 2} NPs concentrations. The removal of tightly bound EPSs (TB-EPSs) either with or without the addition of CeO{sub 2} NPs significantly decreased the yield stress (τ{sub y}) and the limiting viscosity (η{sub ∞}). Furthermore, the dynamic (strain, frequency and time) sweep measurements proved that the storage modulus (G') decreased after the extraction of TB-EPSs, indicating the weakened elastic and solid-like properties. The fluctuated content of polysaccharide in LB-EPSs and the increased amount of protein in TB-EPSs were likely to contribute to the variation of viscoelastic behaviors after the removal of LB-EPSs and TB-EPSs, respectively. In addition, the decreased rheological properties of sludge was also related to the increased zeta potential, decreased particle size and the removal of key organic matters of (10{sup 4}–10{sup 6} Da) with the extraction of stratified EPSs. These results were significant to take advantages of the rheological properties for sludge treatment in the presence of NPs.

54 ENVIRONMENTAL SCIENCES↗

Continuous partial oxidation of methane to methanol over Cu-SSZ-39 catalysts

Here, the direct conversion of methane to methanol using molecular oxygen as the oxidant is a grand challenge in the chemical sciences. Here we describe our efforts in using copper-exchanged SSZ-39 for this chemistry and show it is a promising material for this reaction. Testing in a continuous flow reactor at 225 °C, Cu-SSZ-39 showed superior activity for methane partial oxidation compared to Cu-SSZ-13 (site time yields of 26.9 ± 0.8 mol CH3OH ·mol Cu -1 ·h -1 *10 -3 versus 13.2 mol CH3OH ·mol Cu -1 ·h -1 *10 -3 respectively). A clear maximum in methanol productivity, both in terms of a mass catalyst basis and copper atom basis is observed for Cu-SSZ-39 at a Cu/Al ~ 0.2. Running this reaction in the absence of oxygen over samples with a Cu/Al > 0.1 the reactivity is markedly lower than that in the presence of oxygen unlike what is observed in SSZ-13.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computation at a coordinate singularity

Coordinate singularities are sometimes encountered in computational problems. An important example involves global atmospheric models used for climate and weather prediction. Classical spherical coordinates can be used to parameterize the manifold – that is, generate a grid for the computational spherical shell domain. This particular parameterization offers significant benefits such as orthogonality and exact representation of curvature and connection (Christoffel) coefficients. But it also exhibits two polar singularities and at or near these points typical continuity/integral constraints on dependent fields and their derivatives are generally inadequate and lead to poor model performance and erroneous results. Other parameterizations have been developed that eliminate polar singularities, but problems of weaker singularities and enhanced grid noise compared to spherical coordinates (away from the poles) persist. Here, in this study reparameterization invariance of geometric objects (scalars, vectors and the forms generated by their covariant derivatives) is utilized to generate asymptotic forms for dependent fields of interest valid in the neighborhood of a pole. The central concept is that such objects cannot be altered by the metric structure of a parameterization. The new boundary conditions enforce symmetries that are required for transformations of geometric objects. They are implemented in an implicit polar filter of a structured grid, nonhydrostatic global atmospheric model that is simulating idealized Held–Suarez flows. A series of test simulations using different configurations of the asymptotic boundary conditions are made, along with control simulations that use the default model numerics with no absorber, at three different grid sizes. Typically the test simulations are ~ 20% faster in wall clock time than the control—resulting from a decrease in noise at the poles in all cases. In the control simulations adverse numerical effects from the polar singularity are observed to increase with grid resolution. In contrast, test simulations demonstrate robust polar behavior independent of grid resolution.

97 MATHEMATICS AND COMPUTING↗

Sharp front tracking with geometric interface reconstruction

Here, this paper presents a novel sharp front-tracking method designed to address limitations in classical front-tracking approaches, specifically their reliance on smooth interpolation kernels and extended stencils for coupling the front and fluid mesh. In contrast, the proposed method employs exclusively sharp, localized interpolation and spreading kernels, restricting the coupling to the interfacial fluid cells–those containing the interface/front. This localized coupling is achieved by integrating a divergence-preserving velocity interpolation method with a piecewise parabolic interface calculation (PPIC) and a polyhedron intersection algorithm to compute the indicator function and local interface curvature. Surface tension is computed using the Continuum Surface Force (CSF) method, maintaining consistency with the sharp representation. Additionally, we propose an efficient local roughness smoothing implementation to account for surface mesh undulations, which is easily applicable to any triangulated surface mesh. Building on our previous work, the primary innovation of this study lies in the localization of the coupling for both the indicator function and surface tension calculations. By reducing the interface thickness on the fluid mesh to a single cell, as opposed to the 4–5 cell spans typical in classical methods, the proposed sharp front-tracking method achieves a highly localized and accurate representation of the interface. This sharper representation mitigates parasitic currents and improves force balancing, making it particularly suitable for scenarios where the interface plays a critical role, such as microfluidics, fluid-fluid interactions, and fluid-structure interactions. The proposed method is comprehensively validated and tested on canonical interfacial flow problems, including stationary and translating Laplace equilibria, oscillating droplets, and rising bubbles. The presented results demonstrate that the sharp front-tracking method significantly outperforms the classical approach in terms of accuracy, stability, and computational efficiency. Notably, parasitic currents are reduced by approximately two orders of magnitude and stable results are obtained for parameter ranges where classical front tracking fails to converge.

42 ENGINEERING↗

Tempering kinetics during multilayer laser additive manufacturing of a ferritic steel

Grade 91 steel forms martensite during additive manufacturing and the extent of tempering of martensite significantly affects the mechanical properties of parts. Currently, there is a lack of quantitative understanding of the tempering kinetics for Grade 91 steel, and as a result, the effects of repeated thermal cycles on properties for different processing conditions cannot be determined. Here we evaluate the tempering kinetics by determining the constant terms in the Johnson Mehl Avrami kinetic equation from the tempering data available in the literature and the thermal cycles computed using a rigorously-tested heat and fluid flow model of multi-layer additive manufacturing. The raw tempering data are cleaned using a neural network to enhance accuracy. The lower layers experience repeating cycles of heating and cooling when the upper layers are added. As a result, the hardness is reduced owing to the tempering of martensite. In contrast, martensite formed in the upper layers is not tempered to the same extent and the hardness remains high. Therefore, the hardness of the part increases with the distance from the substrate. Variations in the heat input at different laser powers and scanning speeds significantly affect the extent of tempering. Finally, since the method used here can provide a quantitative understanding of the tempering of martensite and the spatial variation in hardness, it can be used to tailor the microstructure and hardness of heat treatable printed metallic parts.

36 MATERIALS SCIENCE↗

Modeling of dislocation channel width evolution in irradiated metals

Defect-free dislocation channel formation has been reported to promote plastic instability during tensile testing via localized plastic flow, leading to a distinct loss of ductility and strain hardening in many low-temperature irradiated materials. In order to study the underlying mechanisms governing dislocation channel width and formation, the channel formation process is modeled via a simple stochastic dislocation-jog process dependent upon grain size, defect cluster density, and defect size. Dislocations traverse a field of defect clusters and jog stochastically upon defect interaction, forming channels of low defect-density. And based upon prior molecular dynamics (MD) simulations and in-situ experimental transmission electron microscopy (TEM) observations, each dislocation encounter with a dislocation loop or stacking fault tetrahedron (SFT) is assumed to cause complete absorption of the defect cluster, prompting the dislocation to jog up or down by a distance equal to half the defect cluster diameter. Channels are predicted to form rapidly and are comparable to reported TEM measurements for many materials. Predicted channel widths are found to be most strongly dependent on mean defect size and correlated well with a power law dependence on defect diameter and density, and distance from the dislocation source. Due to the dependence of modeled channel width on defect diameter and density, maximum channel width is predicted to slowly increase as accumulated dose increases. The relatively weak predicted dependence of channel formation width with distance, in accordance with a diffusion analogy, implies that after only a few microns from the source, most channels observed via TEM analyses may not appear to vary with distance because of limitations in the field-of-view to a few microns. Furthermore, examinations of the effect of the so-called “source-broadening” mechanism of channel formation showed that its effect is simply to add a minimum thickness to the channel without affecting channel dependence on the given parameters.

36 MATERIALS SCIENCE↗

Direct comparison of nanoindentation and tensile test results on reactor-irradiated materials

Nanoindentation testing has been used for decades to assess materials on a local scale and to obtain fundamental mechanical property parameters. Nuclear materials research often faces the challenge of testing rather small samples due to the hazardous nature, limited space in reactors, and shallow ion-irradiated zones, fostering the need for small-scale mechanical testing (SSMT). As such, correlating the results from SSMT to bulk properties is particularly of interest. Here, this study compares macroscopic tensile test data (yield and flow stresses) to nanoindentation data (hardness) obtained on a number of different neutron-irradiated materials in order to understand the scaling behavior on radiation-damaged samples.

36 MATERIALS SCIENCE↗

Influence of concentration polarization and thermodynamic non-ideality on salt transport in reverse osmosis membranes

The classic Merten and Lonsdale transport model for reverse osmosis membranes was reformulated to explicitly demonstrate the effects of concentration polarization and solution phase thermodynamic non-idealities on salt transport. A framework presented here accounts for the concentration dependence of ion activity coefficients in salt solutions, which was not explicitly included in the classic model. This approach was applied to four salt solutions, NaCl, MgCl 2 , CaCl 2 , and Na 2 SO 4 , tested in cross-flow conditions for a commercial RO membrane, Dow Filmtec™ BW30XFR. Salt transport coefficients corrected for concentration polarization and non-ideal thermodynamic effects, B a , were calculated as a function of permeate flux and compared with apparent salt transport coefficients, B . Finally, these corrections were significant, resulting in B a values greater than B values by a factor of 1.3–2.1 for 2:1 and 1:2 salts (i.e., MgCl 2 , CaCl 2 , and Na 2 SO 4 ). B a values for NaCl (a 1:1 salt), however, were similar to or somewhat smaller than B values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simplified modeling of liquid sodium medium with temperature and velocity gradient using real thermal-hydraulic data. Application to ultrasonic thermometry in sodium fast reactor

In the framework of the French R and D program for the Generation IV reactors and specifically for the sodium cooled fast reactors (SFR), studies are carried out on innovative instrumentation methods in order to improve safety and to simplify the monitoring of fundamental physical parameters during reactor operation. The aim of the present work is to develop an acoustic thermometry method to follow up the sodium temperature at the outlet of subassemblies. The medium is a turbulent flow of liquid sodium at 550 Degree-Sign C with temperature inhomogeneities. To understand the effect of disturbance created by this medium, numerical simulations are proposed. A ray tracing code has been developed with Matlab Copyright-Sign in order to predict acoustic paths in this medium. This complex medium is accurately described by thermal-hydraulic data which are issued from a simulation of a real experiment in Japan. The analysis of these results allows understanding the effects of medium inhomogeneities on the further thermometric acoustic measurement.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

On a burning plasma low recycling regime with P DT = 23–26 MW, Q DT = 5–7 in a JET-like tokamak

The recent invention of a continuously flowing liquid lithium system, called 24/7-FLiLi, opens the opportunity to design a plasma pumping divertor which can significantly suppress plasma edge cooling by recycling. The paper describes the expected performance of deuterium–tritium burning plasma with low recycling using a tokamak of JET size, magnetic field and plasma current as an example. So far, only the technological aspects of flowing lithium have been tested on the HT-7 and EAST tokamaks (ASIPP, Hefei, China) with no attempts to create the low recycling regime. The compatibility of 24/7-FLiLi with tokamak plasma was confirmed and some mistakes in the design were revealed, thus, requiring another fabrication approach. Now, with the proper design of the Li system, recycling as low as 0.5 seems to be achievable. The suppression of plasma cooling by recycling in combination with neutral beam injection (NBI) for core plasma fueling by energetic particles automatically leads to ‘the best possible confinement regime’, uniquely compatible with burning plasma. This paper outlines the conceptual details of the 24/7-FLiLi divertor for a JET size tokamak. The main focus is in regard to the physics of the low recycling regime as well as to the expected performance of the burning plasma. In comparison with the results of 1994 on TFTR and 1997 on JET, the projected performance is astonishing: fusion power P DT = 23–26 MW, fusion efficiency Q DT = 5.7 – 6.4, tritium burn up 7.8%–8.7% with modest NBI power P NBI = 4 MW, and energy E NBI = 120 keV. Furthermore, this new regime could resolve the outstanding plasma physics issues related to burning plasma that are unsolvable with the currently dominant approach.

24/7-FLiLi↗

Conformal holography of bulk elliptic flow and heavy-quark quenching in relativistic heavy ion collisions

We show that the 'perfect fluid' elliptic flow of the bulk hadrons and the unexpectedly strong quenching of heavy quark jet fragments in Au + Au reactions at 200A GeV can be simultaneously accounted for within leading-order anti-de-Sitter space/conformal field theory (AdS/CFT) holography with a common large t'Hooft coupling {lambda}=g{sub YM}{sup 2}N{sub c}{approx}30. In contrast, weakly coupled quark-gluon plasma models have so far failed to describe the observed correlation between these soft and hard observables even for couplings extrapolated to {alpha}{sub s}{approx}0.5. We show that phenomenological applications of the classical trailing string AdS/CFT holographic solution are furthermore remarkably robust to higher-order curvature corrections O(1/{lambda}{sup 3/2}) in type IIB supergravity theories, as well as to worldsheet fluctuation corrections O(1/{lambda}{sup 1/2}) that were not considered previously. We emphasize the importance of future measurements at Relativistic Heavy Ion Collider (RHIC) and Large Hadron Collider (LHC) of the correlation between identified charm and beauty quark hard (p{sub T}>10-30 GeV) jet quenching observables and low transverse momenta (p{sub T{<=}}1 GeV) bulk elliptic flow observables to further test the limits of the applicability of conformal holography to strongly coupled quark-gluon plasma.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

IEEE 342 Node Low Voltage Networked Test System

The IEEE Distribution Test Feeders provide a benchmark for new algorithms to the distribution analyses community. The low voltage network test feeder represents a moderate size urban system that is unbalanced and highly networked. This is the first distribution test feeder developed by the IEEE that contains unbalanced networked components. The 342 node Low Voltage Networked Test System includes many elements that may be found in a networked system: multiple 13.2kV primary feeders, network protectors, a 120/208V grid network, and multiple 277/480V spot networks. This paper presents a brief review of the history of low voltage networks and how they evolved into the modern systems. This paper will then present a description of the 342 Node IEEE Low Voltage Network Test System and power flow results.

Schneider, Kevin P.↗

Analytical Voltage Sensitivity Analysis for Unbalanced Power Distribution System

Large scale integration of distributed energy resources and electric vehicles in a transactive energy environment present new challenges in terms of voltage stability and fluctuations in a power distribution system. The impact of different level of DER/EV penetration on the voltages across the network is typically quantified through voltage sensitivity analyses. Existing methods of voltage sensitivity analysis are computationally expensive and prior efforts to develop analytical approximation lacks generality and have not been effectively validated. The objective of this work is to provide a new analytical method of voltage sensitivity analysis that has low computational cost and also allows for stochastic analysis of voltage change. This paper first derives an analytical approximation of change in voltage at a particular bus due to change in power consumption at other bus in a radial three phase unbalanced power distribution system. Then, the proposed method is shown to be valid for different load configurations, which demonstrates its generality. The results from our analytical approach is validated via classical load flow simulation of the test system based on IEEE 37 bus network. The proposed method is shown to have good accuracy, and computation complexity is of order O(1), compared to O(n3) in classical sensitivity analysis approaches.

Munikoti, Sai↗

Fracture Sustainability in Enhanced Geothermal Systems: Experimental and Modeling Constraints

Enhanced geothermal systems (EGS) offer the potential for a much larger energy source than conventional hydrothermal systems. Hot, low-permeability rocks are prevalent at depth around the world, but the challenge of extracting thermal energy depends on the ability to create and sustain open fracture networks. Laboratory experiments were conducted using a suite of selected rock cores (granite, metasediment, rhyolite ash-flow tuff, and silicified rhyolitic tuff) at relevant pressures (uniaxial loading up to 20.7 MPa and fluid pressures up to 10.3 MPa) and temperatures (150–250 °C) to evaluate the potential impacts of circulating fluids through fractured rock by monitoring changes in fracture aperture, mineralogy, permeability, and fluid chemistry. Because a fluid in disequilibrium with the rocks (deionized water) was used for these experiments, there was net dissolution of the rock sample: this increased with increasing temperature and experiment duration. Thermal-hydrological-mechanical-chemical (THMC) modeling simulations were performed for the rhyolite ash-flow tuff experiment to test the ability to predict the observed changes. These simulations were performed in two steps: a thermal-hydrological-mechanical (THM) simulation to evaluate the effects of compression of the fracture, and a thermal-hydrological-chemical (THC) simulation to evaluate the effects of hydrothermal reactions on the fracture mineralogy, porosity, and permeability. Furthermore, these experiments and simulations point out how differences in rock mineralogy, fluid chemistry, and geomechanical properties influence how long asperity-propped fracture apertures may be sustained. Such core-scale experiments and simulations can be used to predict EGS reservoir behavior on the field scale.

15 GEOTHERMAL ENERGY↗