Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “finite difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Efficient linear and nonlinear heat conduction with a quadrilateral element

A method is presented for performing efficient and stable finite element calculations of heat conduction with quadrilaterals using one-point quadrature. The stability in space is obtained by using a stabilization matrix which is orthogonal to all linear fields and its magnitude is determined by a stabilization parameter. It is shown that the accuracy is almost independent of the value of the stabilization parameter over a wide range of values; in fact, the values 3, 2, and 1 for the normalized stabilization parameter lead to the 5-point, 9-point finite difference, and fully integrated finite element operators, respectively, for rectangular meshes and have identical rates of convergence in the L2 norm. Eigenvalues of the element matrices, which are needed for stability limits, are also given. Numerical applications are used to show that the method yields accurate solutions with large increases in efficiency, particularly in nonlinear problems.

Liu, W. K.↗

Preconditioned Minimal Residual Methods for Chebyshev Spectral Caluclations

The problem of preconditioning the pseudospectral Chebyshev approximation of an elliptic operator is considered. The numerical sensitiveness to variations of the coefficients of the operator are investigated for two classes of preconditioning matrices: one arising from finite differences, the other from finite elements. The preconditioned system is solved by a conjugate gradient type method, and by a DuFort-Frankel method with dynamical parameters. The methods are compared on some test problems with the Richardson method and with the minimal residual Richardson method.

Canuto, C.↗

An implicit, transonic, full-potential code for cascade flow on H-grid topology

A transonic, full-potential code is developed for computing the flow through two-dimensional cascades using an H-type grid topology that employs an implicit approximate-factorization scheme. The body-conforming H-grid is generated numerically by solving Poisson's equation. The flow-solution algorithm at the coordinate mapping singularity associated with this grid is investigated using two different types of finite-difference schemes. The grid-geometry effect on these schemes is also studied by noting free-stream capturing properties. It is found that by implementing a consistent spatial differencing scheme, the mapping singularities can be resolved numerically, and the grid-geometry-induced error minimized. The code is verified by computing model cascade flow problems.

Kwak, D.↗

Preconditioned minimal residual methods for Chebyshev spectral calculations

The problem of preconditioning the pseudospectral Chebyshev approximation of an elliptic operator is considered. The numerical sensitiveness to variations of the coefficients of the operator are investigated for two classes of preconditioning matrices: one arising from finite differences, the other from finite elements. The preconditioned system is solved by a conjugate gradient type method, and by a Dufort-Frankel method with dynamical parameters. The methods are compared on some test problems with the Richardson method and with the minimal residual Richardson method.

Canuto, C.↗

Flux-difference split parabolized Navier-Stokes algorithm for non-equilibrium chemically reacting flows

A flux-difference split explicit finite-difference algorithm is presented for solving the parabolized form of the equations governing three-dimensional nonequilibrium chemically reacting flows. The algorithm is based on an explicit noniterative, upwind space-marching scheme developed by Korte, but differs in that the unsteady Riemann problem, rather than the steady Riemann problem, is solved. The algorithm allows either a second or an approximately third-order accurate upwind treatment of the convection terms by employing the unsteady approximate Riemann solver of Roe. The source terms of the species transport equations are treated in either an explicit or implicit manner, and the species diffusion terms are modeled with either a Fickian or a multicomponent model. A validation of the algorithm is performed by comparing computational results with the 2-D Mach 14, 15 degree compression-corner data of Holden. The three-dimensional capability of the algorithm is demonstrated by computing Mach 2.7 flow over a swept wedge scramjet fuel injector, and three-dimensional reacting flow capability is demonstrated by a computing a shock-jet interaction concept for mixing and combustion enhancement.

White, J. A.↗

A comparison of optimization-based approaches for solving the aerodynamic design problem

Three optimization-based methods for solving aerodynamic design problems are compared. The Euler equations for one-dimensional duct flow was used as a model problem, and the three methods are compared for efficiency, robustness, and implementation difficulty. The smoothness of the design problem with respect to different shock-capturing finite difference schemes, and in the presence of grid refinement, is investigated.

Frank, Paul D.↗

Modeling and new equipment definition for the vibration isolation box equipment system

Our MSAD-funded research project is to provide numerical modeling support for the VIBES (Vibration Isolation Box Experiment System) which is an IML2 flight experiment being built by the Japanese research team of Dr. H. Azuma of the Japanese National Aerospace Laboratory. During this reporting period, the following have been accomplished: A semi-consistent mass finite element projection algorithm for 2D and 3D Boussinesq flows has been implemented on Sun, HP And Cray Platforms. The algorithm has better phase speed accuracy than similar finite difference or lumped mass finite element algorithms, an attribute which is essential for addressing realistic g-jitter effects as well as convectively-dominated transient systems. The projection algorithm has been benchmarked against solutions generated via the commercial code FIDAP. The algorithm appears to be accurate as well as computationally efficient. Optimization and potential parallelization studies are underway. Our implementation to date has focused on execution of the basic algorithm with at most a concern for vectorization. The initial time-varying gravity Boussinesq flow simulation is being set up. The mesh is being designed and the input file is being generated. Some preliminary 'small mesh' cases will be attempted on our HP9000/735 while our request to MSAD for supercomputing resources is being addressed. The Japanese research team for VIBES was visited, the current set up and status of the physical experiment was obtained and ongoing E-Mail communication link was established.

Sani, Robert L.↗

Unified CFD Methods Via Flowfield-Dependent Variation Theory

This paper addresses the flowfield-dependent variation (FDV) methods in which complex physical phenomena are taken into account in the final form of partial differential equations to be solved so that finite difference methods (FDM) or finite element methods (FEM) themselves will not dictate the physics, but rather are no more than simply the options how to discretize between adjacent nodal points or within an element. The variation parameters introduced in the formulation are calculated from the current flowfield based on changes of Mach numbers, Reynolds numbers, Peclet numbers, and Damkohler numbers between adjacent nodal points, which play many significant roles such as adjusting the governing equations (hyperbolic, parabolic, and/or e!liptic), resolving various physical phenomena, and controlling the accuracy and stability of the numerical solution. The theory is verified by a number of example problems addressing the physical implications of the variation parameters which resemble the flowfield itself, shock capturing mechanism, transitions and interactions between inviscid/viscous, compressibility/incompressibility, and laminar/turbulent flows.

Chung, T. J.↗

Stereo Imaging Velocimetry of Mixing Driven by Buoyancy Induced Flow Fields

Mixing of two fluids generated by steady and particularly g-jitter acceleration is fundamental towards the understanding of transport phenomena in a microgravity environment. We propose to carry out flight and ground-based experiments to quantify flow fields due to g-jitter type of accelerations using Stereo Imaging Velocimetry (SIV), and measure the concentration field using laser fluorescence. The understanding of the effects of g-jitter on transport phenomena is of great practical interest to the microgravity community and impacts the design of experiments for the Space Shuttle as well as the International Space Station. The aim of our proposed research is to provide quantitative data to the community on the effects of g-jitter on flow fields due to mixing induced by buoyancy forces. The fundamental phenomenon of mixing occurs in a broad range of materials processing encompassing the growth of opto-electronic materials and semiconductors, (by directional freezing and physical vapor transport), to solution and protein crystal growth. In materials processing of these systems, crystal homogeneity, which is affected by the solutal field distribution, is one of the major issues. The understanding of fluid mixing driven by buoyancy forces, besides its importance as a topic in fundamental science, can contribute towards the understanding of how solutal fields behave under various body forces. The body forces of interest are steady acceleration and g-jitter acceleration as in a Space Shuttle environment or the International Space Station. Since control of the body force is important, the flight experiment will be carried out on a tunable microgravity vibration isolation mount, which will permit us to precisely input the desired forcing function to simulate a range of body forces. To that end, we propose to design a flight experiment that can only be carried out under microgravity conditions to fully exploit the effects of various body forces on fluid mixing. Recent flight experiments, by the P.I. through collaboration with the Canadian Space Agency (STS-85, August 1997), aimed at determining the stability of the interface between two miscible liquids inside an enclosure show that a long liquid column (5 cm) under microgravity isolation conditions can be stable, i.e. the interface remains sharp and vertical over a short time scale; thus transport occurs by molecular mass diffusion. On the other hand, when the two liquids were excited from a controlled vibration source (Microgravity Vibration Isolation Mount) two to four mode large amplitude quasi-stationary waves were observed. The data was limited to CCD recording of the dynamics of the interface between the two fluids. We propose to carry out flight experiments to quantify the dynamics of the flow field using Stereo Imaging Velocimetry and measure the concentration field using laser fluorescence. The results will serve as a basis to understand effects of g-jitter on transport phenomena, in this case mass diffusion. As the measurement of the kinematics of the flow field will shed light on the instability mechanism. The research will allow measurement of the flow field in microgravity environment to prove two hypotheses: (1) Maxwell's hypothesis: finite convection always exists in diffusing systems, and (2) Quasi-stationary waves inside a bounded enclosure in a microgravity environment is generated by Kelvin-Helmholtz instability; resonance of the interface which produces incipient mixing is due to Rayleigh-Taylor instability. The first hypothesis can be used as a benchmark experiment to illustrate diffusive mixing. The second hypothesis will lead to the understanding of g-jitter effects on buoyancy driven flow fields which occur in many situations involving materials processing, and other basic fluid physics phenomena. In addition, the second hypothesis will also provide insight in how Rayleigh-Taylor and Kelvin-Helmholtz instabilities propagate concentration fronts during mixing. Measurement of the flow field using SIV is important because it is the flow field which causes instability at the interface between the two fluids. Mixing driven by buoyancy induced flow fields will be addressed both experimentally and computationally. The experimental effort will address the kinematics of mixing: stretching, transport and chaos. Quantification of the mechanisms of mixing will consists of measuring the flow field using the SIV system at Glenn and capturing the dynamics of the interface, to measure mass transport, using a CCD camera. These experiments will be carried out within the framework of Earth's gravity and g-jitter microgravity acceleration as in a Space Shuttle environment or the International Space Station. The g-jitter will be induced and controlled using a tunable vibration isolation platform to isolate against vibration as well as input periodic and random vibration to the system. The parametric range of the microgravity experiment will be extended from the experiments on STS-85 to investigate higher mode quasi-stationary waves (8 to 12), as well as resonance regions which leads to chaos and turbulence. Ground-based experiments will focus on effects of vibration on stably stratified fluid layers in order to scale for possible scenarios in a microgravity environment. These vibrations will be subjected perpendicular to the concentration field on the ground since the parallel case can only be carried out in a microgravity environment. The concept of dynamical similarity will be applied to tune the experiments as closely as possible to a Space Shuttle environment or the International Space Station. The computational effort will take advantage of the Computational Laboratory at Glenn to corroborate the experimental findings with predictions of the dynamics of the flow field using the codes FLUENT (finite difference based) and FIDAP (finite element based). We will investigate two important cases, single-fluid model to address dilute systems with negligible jump in viscosity and the more general two-fluid model which accounts for finite jump in viscosity. Apart from its microgravity relevance, this experiment is well suited to study dynamics in nonlinear systems.

Duval, W. M. B.↗

Incompressible Navier-Stokes Solvers in Primative Variables and their Applications to Steady and Unsteady Flow Simulations

This paper reviews recent progress made in incompressible Navier-Stokes simulation procedures and their application to problems of engineering interest. Discussions are focused on the methods designed for complex geometry applications in three dimensions, and thus are limited to primitive variable formulation. A summary of efforts in flow solver development is given followed by numerical studies of a few example problems of current interest. Both steady and unsteady solution algorithms and their salient features are discussed. Solvers discussed here are based on a structured-grid approach using either a finite -difference or a finite-volume frame work. As a grand-challenge application of these solvers, an unsteady turbopump flow simulation procedure has been developed which utilizes high performance computing platforms. In the paper, the progress toward the complete simulation capability of the turbo-pump for a liquid rocket engine is reported. The Space Shuttle Main Engine (SSME) turbo-pump is used as a test case for evaluation of two parallel computing algorithms that have been implemented in the INS3D code. The relative motion of the grid systems for the rotorstator interaction was obtained using overact grid techniques. Unsteady computations for the SSME turbo-pump, which contains 114 zones with 34.5 million grid points, are carried out on SCSI Origin 3000 systems at NASA Ames Research Center. The same procedure has been extended to the development of NASA-DeBakey Ventricular Assist Device (VAD) that is based on an axial blood pump. Computational, and clinical analysis of this device are presented.

Kiris, Cetin C.↗

Explicit and implicit calculations of turbulent cavity flows with and without yaw angle

Computations were performed to simulate turbulent supersonic flows past three-dimensional deep cavities with and without yaw. Simulation of these self-sustained oscillatory flows were generated through time accurate solutions of the Reynolds averaged complete Navier-Stokes equations using two different schemes: (1) MacCormack, finite-difference; and (2) implicit, upwind, finite-volume schemes. The second scheme, which is approximately 30 percent faster, is found to produce better time accurate results. The Reynolds stresses were modeled, using the Baldwin-Lomax algebraic turbulence model with certain modifications. The computational results include instantaneous and time averaged flow properties everywhere in the computational domain. Time series analyses were performed for the instantaneous pressure values on the cavity floor. The time averaged computational results show good agreement with the experimental data along the cavity floor and walls. When the yaw angle is nonzero, there is no longer a single length scale (length-to-depth ratio) for the flow, as is the case for zero yaw angle flow. The dominant directions and inclinations of the vortices are dramatically different for this nonsymmetric flow. The vortex shedding from the cavity into the mainstream flow is captured computationally. This phenomenon, which is due to the oscillation of the shear layer, is confirmed by the solutions of both schemes.

Yen, Guan-Wei↗

Linear and nonlinear benchmarks between the CLT code and the M3D-C1 code for the 2/1 resistive tearing mode and the 1/1 resistive kink mode

Here, the linear and nonlinear benchmarks between the CLT code and the M3D-C1 code for the 2/1 resistive tearing mode and the 1/1 resistive kink mode are presented. CLT is an explicit finite difference code, while M3D-C1 is an implicit finite element code. Although the implementations of CLT and M3D-C1 are totally different, we find that the simulation results of the resistive-kink mode and the m/n=2/1 tearing mode from M3D-C1 and CLT are almost the same, including the linear and nonlinear growth rates, the mode structures, the nonlinear saturation levels, the Poincare plots, and the scaling laws. This confirms that the nonlinear results for the 1/1 resistive-kink mode and 2/1 tearing mode are accurate and reliable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Smoothed boundary method for simulating incompressible flow in complex geometries

Simulating flow through porous media with explicit considerations of complex microstructures is very challenging using conventional sharp-interface methods because of the difficulties in generating meshes conformal to complex geometries. In this work, a diffuse interface embedded boundary method known as the Smoothed Boundary Method (SBM) is utilized to facilitate simulations of fluid dynamics involving complex geometries. In diffuse-interface methods, the geometry is described by a domain parameter. The SBM allows the straightforward reformulation of the time-dependent Navier-Stokes equations in terms of this domain parameter, using only algebraic identities. Thus, enforcing the appropriate boundary conditions at the irregular embedded boundary is greatly simplified. Adaptive mesh refinement is used to increase the accuracy of the diffuse interface method by allowing thinner interfacial thickness to be used in the domain parameter. Here, the SBM-formulated Navier-Stokes equations are solved with the Finite Difference Method on refined mesh systems. Sharp-interface Finite Element Method simulations using the commercial software COMSOL on body-conforming meshes are also provided for comparison. Favorable agreement between the two methods is observed. Since it is no longer necessary for the mesh to conform to the complex geometry, the grid system for the SBM simulations can be generated rapidly and without additional manual interventions, making the entire simulation process more expedient.

36 MATERIALS SCIENCE↗

Stability analysis of numerical boundary conditions and implicit difference approximations for hyperbolic equations

Implicit, noniterative, finite difference schemes were recently developed by several authors for multidimensional systems of nonlinear hyperbolic partial differential equations. When applied to linear model equations with periodic boundary conditions those schemes are unconditionally stable (A-stable). As applied in practice the algorithms often face a severe time step restriction. A major source of the difficulty is the treatment of the numerical boundary conditions. One conjecture was that unconditional stability requires implicit numerical boundary conditions. An apparent counter example was the space time extrapolation considered by Gustafsson, Kreiss, and Sunstrom. Spatial (implicit) and space time (explicit) extrapolation using normal mode analysis for a finite and infinite number of spatial mesh intervals are examined. The results indicate that for unconditional stability with a finite number of spatial mesh intervals, the numerical boundary conditions must be implicit.

Beam, R. M.↗