SEARCH · Engineering Papers

Results for “feature impact”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

NASA NTRS1991

A search for spectral units on the Uranian satellites using color ratio images

Twenty multispectral sets of calibrated coregistered Voyager 2 images of the Uranian satellites are analyzed in order to identify spectrally distinct surface units and associate these units with specific endogenic or exogenic surface processes. Several regions on each satellite where significant spectral/compositional diversity could be expected were identified by morphologic unit mapping. All the Uranian satellites were found to exhibit some degree of spectral variability associated with bright impact craters, with the typical trend being that the bright craters and their associated ejecta deposits are less red than the remainder of the satellites by 5 to 30 percent. Oberon shows the greatest variability, followed by Titania and Ariel. Morphologic features on Miranda and Ariel possibly associated with endogenic processes such as tectonism or ice volcanism do not exhibit as high a degree of spectral variability relative to their surroundings as bright impact craters.

Bell, J. F., III↗

NASA NTRS2023

Risks of Synchronized Low Yields Are Underestimated in Climate and Crop Model Projections

Simultaneous harvest failures across major crop-producing regions are a threat to global food security. Concurrent weather extremes driven by a strongly meandering jet stream could trigger such events, but so far this has not been quantified. Specifically, the ability of state-of-the art crop and climate models to adequately reproduce such high impact events is a crucial component for estimating risks to global food security. Here we find an increased likelihood of concurrent low yields during summers featuring meandering jets in observations and models. While climate models accurately simulate atmospheric patterns, associated surface weather anomalies and negative effects on crop responses are mostly underestimated in bias-adjusted simulations. Given the identified model biases, future assessments of regional and concurrent crop losses from meandering jet states remain highly uncertain. Our results suggest that model-blind spots for such high-impact but deeply-uncertain hazards have to be anticipated and accounted for in meaningful climate risk assessments.

Atmospheric dynamics↗

NASA NTRS1971

Supporting research and technology

The development of definition of the modular space station is discussed. The modular approach was evaluated, the requirements were defined, and program definition and design were accomplished. The features of the program which significantly affect the initial development and early operating costs were identified and their impacts on the program were assessed. Specifications of various systems and components are included.

Source record↗

NASA NTRS1971

Impact breccias in carbonate rocks, Sierra Madera, Texas.

Two main types of deformational breccia occur in the Sierra Madera cryptoexplosion structure: monolithologic breccias composed of shattered rock of a single lithology and mixed breccias composed of rocks of several lithologies. Monolithologic breccias generally show no mineralogic signs of shock deformation, but a few samples are shatter-coned in a manner suggesting simultaneous formation of breccias and shatter cones. Mixed breccias, forming irregular, cross-cutting bodies, consistently contain moderately to highly shocked material, with mineralogic evidence of shock pressures of 50 kb to more than 200 kb, which, with evidence from the structural geometry of Sierra Madera and orientation of shatter cones, indicate an impact origin of the breccias. The mode of occurrence of the breccias, petrographic characteristics, and association with shock features are shared by breccias in many other cryptoexplosion structures in both carbonate and crystalline rock terranes, suggesting that such breccias have a common origin.

Wilshire, H. G.↗

NASA NTRS1972

Selected volcanic and surficial features, part O

Metric camera photographs are used to analyze volcanic and surficial features of the lunar surface between Mare Smythii and King Crater. Patterns created by lava flows, ejecta blankets, impact debris, and fissures are discussed in detail. Possible causes of each phenomena are suggested.

Young, R. A.↗

NASA NTRS1975

Processes of lunar crater degradation - Changes in style with geologic time

Relative age schemes of crater degradation are calibrated to radiometric dates obtained from lunar samples, changes in morphologic features are analyzed, and the style and rate of lunar surface degradation processes are modeled in relation to lunar geologic time. A comparison of radiometric age scales and the relative degradation of morphologic features for craters larger than about 5 km in diameter shows that crater degradation can be divided into two periods: Period I, prior to about 3.9 billion years ago and characterized by a high meteoritic influx rate and the formation of large multiringed basins, and Period II, from about 3.9 billion years ago to the present and characterized by a much lower influx rate and a lack of large multiringed basins. Diagnostic features for determining the relative ages of craters are described, and crater modification processes are considered, including primary impacts, lateral sedimentation, proximity weathering, landslides, and tectonism. It is suggested that the fundamental degradation of early Martian craters may be associated with erosional and depositional processes related to the intense bombardment characteristics of Period I.

Head, J. W.↗

NASA NTRS1978

Solid Polymer Electrolyte (SPE) fuel cell technology program

Many previously demonstrated improved fuel cell features were consolidated to (1) obtain a better understanding of the observed characteristics of the operating laboratory-sized cells; (2) evaluate appropriate improved fuel cell features in 0.7 sq ft cell hardware; and (3) study the resultant fuel cell capability and determine its impact on various potential fuel cell space missions. The observed performance characteristics of the fuel cell at high temperatures and high current densities were matched with a theoretical model based on the change in Gibbs free energy voltage with respect to temperature and internal resistance change with current density. Excellent agreement between the observed and model performance was obtained. The observed performance decay with operational time on cells with very low noble metal loadings (0.05 mg/sq cm) were shown to be related to loss in surface area. Cells with the baseline amount of noble catalyst electrode loading demonstrated over 40,000 hours of stable performance.

Source record↗

NASA NTRS1980

Downslope movement of material on Deimos

Viking Orbiter images have shown downslope movement of loose material to be an important surface process on Deimos. Loose surface material moves downslope from prominent ridges and accumulates in topographic lows. In some areas, up to 10 m of surface material have been removed; in others, craters up to 200 m in diameter have been filled completely by material moving downslope. Brighter material associated with, and probably derived from crater rims, also moves downslope and forms tapered streamers up to 3 km in length which appear as prominent features on the satellite. The mechanism for downslope movement is uncertain, but thermal creep, micrometeroroid bombardment and impact-related seismic shaking may be involved. Certain craters show conspicuous infilling even though their prominent rims should prevent material moving downslope from reaching their interiors. Such fill must have been emplaced ballistically - the amounts of sediment suggest that over half of all ejecta produced on Deimos are retained on the satellite. Phobos appears to retain little ejecta and shows little evidence of downslope movement of debris.

Thomas, P.↗

NASA NTRS1985

An overview of integrated flywheel technology for aerospace application

Space missions ranging from small scientific satellites to large manned spacecraft have, for many years, utilized systems of spinning flywheels to maintain vehicle attitude. These systems have included momentum and reaction wheels as well as control moment gyros. Extension of that technology to satisfy the additional tasks associated with energy storage has also been pursued. The combining of control and energy storage features into one system has been examined by NASA for space applications and demonstrated in the laboratory. The impact of technology advances in such areas as composite material rotors, magnetic suspensions, motor/generators, and electronics have prompted a re-evaluation of the viability of the flywheel storage system concept for aerospace applications. This paper summarizes the results of this re-examination and identifies shortfalls in the various technology areas.

Keckler, C. R.↗

NASA NTRS1989

Mars - Near-infrared comparative spectroscopy during the 1986 opposition

Near-IR, 0.7-2.5 micron spectra were obtained for several Martian locations during the 1986 opposition, using a continuously variable filter spectrometer; approximately 60 distinct spots were observed at 0.5-1.5 arcsec (200-460 km) resolution which are distinguishable into eight distinct geologic types: (1) volcanic regions, (2) ridged plains, (3) ridged volcanic plains, (4) scoured plains, (5) impact basins, (6) channels and canyons, (7) densely-cratered regions, and (8) layered terrain and ice. Spectral features observed in the spot-to-spot ratios for spectra from different geologic regions are used as indicators of mineralogic differences. Little difference is found among spectra from areas that appear to have very different morphologies in Viking Orbiter images.

Bell, James F., III↗

NASA NTRS1992

Development of a quiet supersonic wind tunnel with a cryogenic adaptive nozzle

The main objective of this work was the development of an interim quiet (low-disturbance) supersonic wind tunnel for the NASA-Ames Fluid Mechanics Laboratory (FML). This is a result of the need to bring the full-scale tunnel on-line as rapidly as possible to impact the NASA High Speed Research Program (HSRP). The development of a cryogenic adaptive nozzle and other sophisticated features of the tunnel will now happen later, after the full scale wind tunnel is in operation.

Wolf, Stephen W. D.↗

NASA NTRS1993

Development of a quiet supersonic wind tunnel with a cryogenic adaptive nozzle

The main objective of this work is to develop an interim Quiet (low-disturbance) supersonic wind tunnel for the NASA-Ames Fluid Mechanics Laboratory (FML). The main emphasis is to bring on-line a full-scale Mach 1.6 tunnel as rapidly as possible to impact the NASA High Speed Research Program (HSRP). The development of a cryogenic adaptive nozzle and other sophisticated features of the tunnel will now happen later, after the full scale wind tunnel is in operation. The work under this contract for the period of this report can be summarized as follows: provide aerodynamic design requirements for the NASA-Ames Fluid Mechanics Laboratory (FML) Laminar Flow Supersonic Wind Tunnel (LFSWT); research design parameters for a unique Mach 1.6 drive system for the LFSWT using an 1/8th-scale Proof-of-Concept (PoC) supersonic wind tunnel; carry out boundary layer transition studies in PoC to aid the design of critical components of the LFSWT; appraise the State of the Art in quiet supersonic wind tunnel design; and help develop a supersonic research capability within the FML particularly in the areas of high speed transition measurements and schlieren techniques. The body of this annual report summarizes the work of the Principal Investigator.

Wolf, Stephen W. D.↗

NASA NTRS1996

Two-Dimensional Computational Model for Wave Rotor Flow Dynamics

A two-dimensional (theta,z) Navier-Stokes solver for multi-port wave rotor flow simulation is described. The finite-volume form of the unsteady thin-layer Navier-Stokes equations are integrated in time on multi-block grids that represent the stationary inlet and outlet ports and the moving rotor passages of the wave rotor. Computed results are compared with three-port wave rotor experimental data. The model is applied to predict the performance of a planned four-port wave rotor experiment. Two-dimensional flow features that reduce machine performance and influence rotor blade and duct wall thermal loads are identified. The performance impact of rounding the inlet port wall, to inhibit separation during passage gradual opening, is assessed.

Welch, Gerard E.↗

NASA NTRS1998

Numerical Simulations of Unsteady Low-Reynolds-Number Flows Over the APEX Airfoil

Laminar and transitional separation bubbles are an important feature of low-Reynolds-number flows over airfoils. The separation bubbles are unsteady and have a significant impact on the aerodynamic properties of the airfoils. In this paper unsteady low-Reynolds-number separated flows over the APEX airfoil are calculated using a Navier-Stokes solver. The numerical results show the presence of unsteady separation bubbles in the flowfield. An analysis of the numerical results shows that flowfield disturbances are amplified significantly in the separation bubble, leading to periodic vortex shedding. A linear stability analysis of the separated boundary layer is performed and the results show that the dominant wavenumber and frequency in the numerical simulations agree with the most unstable wavenumber and frequency from the linear stability analysis. The numerical results also show the growth and interaction of disturbance waves in the separation bubble. For transonic flows over the APEX airfoil, the calculations show that the presence of shocks causes significant changes in the separation location and consequently, the overall flowfield.

Tatineni, Mahidhar↗

NASA NTRS1999

Electro-Statically Stricted Polymers (ESSP)

Miniature, lightweight, miser actuators that operate similar to biological muscles can be used to develop robotic devices with unmatched capabilities and impact many technology areas. Electroactive polymers (EAP) offer the potential to producing such actuators and their main attractive feature is their ability to induce relatively large bending or longitudinal strain. EAP actuators can change the paradigm about the complexity of robots, where robotic components such as motors, gears, bearings, and others can be eliminated with simple drive mechanisms. Generally, these materials produce a relatively low force and the applications that can be considered at the current state of the art are relatively limited. While improved material are being developed there is a need for methods to develop longitudinal actuators that can contract similar to muscles. In this study, the authors began investigating the electromechanical behavior of polymers in reaction to a complex configuration of electric fields. A computer model was used to simulate the electromechanical response. Efforts were made to develop both the material basis as well as the electromechanical modeling of the actuator.

Liu, C.↗

NASA NTRS1999

Flexible Low-Mass Devices and Mechanisms Actuated by Electroactive Polymers

Miniature, lightweight, miser actuators that operate similar to biological muscles can be used to develop robotic devices with unmatched capabilities to impact many technology areas. Electroactive polymers (EAP) offer the potential to producing such actuators and their main attractive feature is their ability to induce relatively large bending or longitudinal strain. Generally, these materials produce a relatively low force and the applications that can be considered at the current state of the art are relatively limited. This reported study is concentrating on the development of effective EAPs and the resultant enabling mechanisms employing their unique characteristics. Several EAP driven mechanisms, which emulate human hand, were developed including a gripper, manipulator arm and surface wiper. The manipulator arm was made of a composite rod with an EAP actuator consisting of a scrolled rope that is activated longitudinally by an electrostatic field. A gripper was made to serve as an end effector and it consisted of multiple bending EAP fingers for grabbing and holding such objects as rocks. An EAP surface wiper was developed to operate like a human finger and to demonstrate the potential to remove dust from optical and IR windows as well as solar cells. These EAP driven devices are taking advantage of the large actuation displacement of these materials but there is need for a significantly greater actuation force capability.

Bar-Cohen, Y↗

NASA NTRS2013

Powered Flight Design and Reconstructed Performance Summary for the Mars Science Laboratory Mission

The Powered Flight segment of Mars Science Laboratory's (MSL) Entry, Descent, and Landing (EDL) system extends from backshell separation through landing. This segment is responsible for removing the final 0.1% of the kinetic energy dissipated during EDL and culminating with the successful touchdown of the rover on the surface of Mars. Many challenges exist in the Powered Flight segment: extraction of Powered Descent Vehicle from the backshell, performing a 300m divert maneuver to avoid the backshell and parachute, slowing the descent from 85 m/s to 0.75 m/s and successfully lowering the rover on a 7.5m bridle beneath the rocket-powered Descent Stage and gently placing it on the surface using the Sky Crane Maneuver. Finally, the nearly-spent Descent Stage must execute a Flyaway maneuver to ensure surface impact a safe distance from the Rover. This paper provides an overview of the powered flight design, key features, and event timeline. It also summarizes Curiosity's as flown performance on the night of August 5th as reconstructed by the flight team.

Mars Science Laboratory (MSL)↗

NASA NTRS1999

Electro-Statically Stricted Polymers (ESSP)

EAP↗