Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electric conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Structural stability, elemental ordering, and transport properties of layered ScTaN 2

Ternary transition metal (TM) nitrides have gained significant attention in thin film research due to their promising properties for a broad range of applications. Particularly, some of the ternary TM nitrides have been predicted to adopt layered structures that make them interesting for thermoelectric conversion and quantum materials applications. Unfortunately, synthesis of TM ternary nitride films by physical vapor deposition often favors disordered 3D structures rather than the predicted 2D-like layered structure. In this study, we investigate the structural interplay in the Sc-Ta-N ternary system using a combinatorial approach. Combinatorial libraries S⁢c 𝑥 ⁢T⁢a 1−𝑥 ⁢N are synthesized following a two-step method: First, deposit film precursors by cosputtering and then process the resulting 3D-structured samples with rapid thermal annealing. Synchrotron grazing-incidence wide-angle x-ray scattering on films annealed at 1200 ⁢°⁢C for 20 min leads to the nucleation of ScTaN 2 layered structure (𝑃⁢6 3 /𝑚⁢𝑚⁢𝑐) near stoichiometry. We find that the layered structure can accommodate large off-stoichiometry in the Ta-rich region (𝑥 < 0.5), facilitated by the alloying with quasi-isostructural Ta 5 ⁢N 6 compound that exists on a composition tie line at 𝑥 = 0. While focusing on ScTaN 2 , we estimate the long-range order parameter in near-stoichiometric films to be 0.86, corresponding to a fraction of Sc/Ta antisites of 7%. Transport measurements on ScTaN 2 reveal a nearly temperature-independent high carrier density (10 21 c⁢m −3 ), suggesting a heavily doped semiconductor or semimetallic character, consistent with a small positive Seebeck coefficient of +19 µV/K. The carrier mobility at 2 K is relatively small (9.5c⁢m 2 V −1 s −1 ) and the residual-resistivity ratio is minor, suggesting that electrical conduction is dominated by defects or disorder. Measured magnetoresistance suggests possible weak antilocalization at 2 K. This paper highlights the interplay between ScTaN 2 and Ta 5 ⁢N 6 crystal structures in stabilizing layered materials, emphasizes the importance of cation order/disorder for potential tunable alloys, and suggests that ScTaN 2 is a promising platform for exploring electronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Observation of Anisotropic Dispersive Dark-Exciton Dynamics in CrSBr

Many-body excitons in CrSBr are attracting intense interest in view of their highly anisotropic magneto-optical coupling and their potential for novel optical interfaces within spintronic and magnonic devices. Characterizing the orbital character and propagation of these electronic excitations is crucial for understanding and controlling their behavior; however, this information is challenging to access. High resolution resonant inelastic x-ray scattering is a momentum-resolved technique that can address these crucial questions. Here, we present measurements collected at the Cr 𝐿 3 -edge which show a rich spectrum of excitations with a variety of spin-orbital characters. While most of these excitations appear to be localized, the dispersion of the lowest energy dark exciton indicates that it is able to propagate along both the 𝑎 and 𝑏 directions within the planes of the crystal. This two-dimensional character is surprising as it contrasts with electrical conductivity and the behavior of the bright exciton, both of which are strongly one dimensional. The discovery of this propagating dark exciton highlights an unusual coexistence of one- and two-dimensional electronic behaviors in CrSBr.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Mechanisms enabling reconfigurability and long-term retention in vanadium oxide electrochemical memory

Phase coexistence in nanoscale electrochemical random-access memory (ECRAM) has recently been demonstrated to enable both information storage and extraordinary reconfigurability. These proof-of-principle demonstrations have left the mechanistic details of such a process unresolved. Particularly, the mechanisms that stabilize the multiple phases, and the underlying processes behind sustained memory retention, remain unclear, and are necessary to design such devices. Here we report microscale ECRAM devices composed of V⁢O𝑥, which enables us to directly probe the active region in an operando fashion using optical techniques. Using Raman mapping, we show the phase coexistence driven by the electrochemical injection of O vacancies to be spatially uniform (i.e., with no filaments). The stability was observed to be unusually long, with 1% loss over 14 years in ambient conditions. First-principles calculations of the oxygen vacancy formation energies in V⁢O 𝑥 further support the thermodynamic coexistence of multiple V⁢O 𝑥 phases and clarify the origin of the observed long-term retention in the ECRAM devices. Further, we demonstrate single devices that can be voltage programmed to exhibit synaptic, neuronal, and reconfigurable logic gate functionalities. Furthermore, we not only uncover the phase coexistence mechanism that may help device design, but also demonstrate the circuit-level applications of reconfigurability.

Electrical conductivity↗
DOE OSTI2023

Light-Induced Decoupling of Electronic and Magnetic Properties in Manganites

The strongly correlated material La 0.7 ⁢Sr 0.3 ⁢Mn⁢O 3 (LSMO) exhibits metal-to-insulator and magnetic transition near room temperature. Although the physical properties of LSMO can be manipulated by strain, chemical doping, temperature, or magnetic field, they often require large external stimuli. Further, to include additional flexibility and tunability, we developed a hybrid optoelectronic heterostructure that uses photocarrier injection from cadmium sulfide (Cd⁢ S) to an LSMO layer to change its electrical conductivity. LSMO exhibits no significant optical response; however, the Cd ⁢S/LSMO heterostructures show an enhanced conductivity, with a resistance drop of about 37%, at the transition temperature under light stimuli. This enhanced conductivity in response to light is comparable to the effect of a 9 T magnetic field in pure LSMO. Surprisingly, the optical and magnetic responses of Cd⁢ S/LSMO heterostructures are decoupled and exhibit different effects when both stimuli are applied. This unexpected behavior shows that heterostructuring strongly correlated oxides may require a new understanding of the coupling of physical properties across the transitions and provide the means to implement new functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dynamic response functions of two-dimensional Dirac fermions with screened Coulomb and short-range interactions

Here, we consider a screened Coulomb interaction between electrons in graphene and determine their dynamic response functions, such as a longitudinal and a transverse electric conductivity and a polarization function and compare them to the corresponding quantities in the short-range interaction model. The calculations are performed to all orders for short-range interaction by taking into account the self-energy renormalization of the electron velocity and using a ladder approximation to account for the vertex corrections, ensuring that the Ward identity (charge conservation law) is satisfied. Our findings predict a resonant response of interacting electron-hole pairs at a particular frequency below the threshold $\textit{qv = ω}$ and further predict an instability for sufficiently strong interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Critical role of magnetic moments in heavy-fermion materials: Revisiting mysteries of SmB 6

Heavy-fermion family exhibits fascinating and often puzzling properties due to the presence of open-shell f ions and the complexity of the associated charge, orbital, and spin degrees of freedom. SmB 6 is a prototypical heavy-fermion compound that is electrically insulating but yet it displays quantum oscillations, which are a telltale signature of the metallic state. Adding to the enigma is the possibility that SmB 6 is a topological Kondo insulator. Here, by treating the spin degree of freedom on an equal footing with other degrees of freedom using the parameter-free strongly-constrained and appropriately-normed (SCAN) density functional, we explore the ground-state electronic structure of SmB6. A number of competing magnetic phases lying very closely in energy are found, indicating the key role of spin fluctuations in the material. The computed band structure, crystal-field splittings in the f-electron complex, the heavy effective electron mass at the Fermi energy, and the large specific heat are all in good agreement with the corresponding experimental results. In particular, our predicted FS explains the experimentally observed bulk quantum oscillations as well as the low electrical conductivity of SmB 6 . The topological Kondo state of SmB6 is shown to be robust regardless of its magnetic configuration. The excellent performance of SCAN in heavy-fermion systems is explained in terms of its ability to treat self-interaction errors and symmetry breaking within the framework of the density functional theory. Our study provides a new approach for modeling heavy-fermion materials

36 MATERIALS SCIENCE↗
DOE OSTI2022

A -type antiferromagnetic order in the Zintl-phase insulator EuZn 2 P 2

Zintl phases, containing strongly covalently bonded frameworks with separate ionically bonded ions, have emerged as a critical materials family in which to couple magnetism and strong spin-orbit coupling to drive diverse topological phases of matter. Here we report the single-crystal synthesis, magnetic, thermodynamic, transport, and theoretical properties of the Zintl compound EuZn 2 P 2 that crystallizes in the anti-La 2 O 3 (CaAl 2 Si 2 ) P-3m1 structure, containing triangular layers of Eu 2+ ions. In-plane resistivity measurements reveal insulating behavior with an estimated activation energy of E g = 0.11eV. Specific heat and magnetization measurements indicate antiferromagnetic ordering at T N = 23K. Curie-Weiss analysis of in-plane and out of plane magnetic susceptibility from T = 150 to 300 K yields p eff = 8.61 for μ 0 H⊥c and p eff = 7.74 for μ 0 H//c, close to the expected values for the 4f 7 J = S = 7/2 Eu 2+ ion and indicative of weak anisotropy. Below T N , a significant anisotropy of χ ⊥ /χ // ≈ 2.3 develops, consistent with A-type magnetic order as observed in isostructural analogs and as predicted by the density functional theory calculations reported herein. The positive Weiss temperatures of θ W =19.2K for μ 0 H⊥c and θ W =41.9K for μ 0 H//c show a similar anisotropy and suggest competing ferromagnetic and antiferromagnetic interactions. Comparing Eu magnetic ordering temperatures across trigonal EuM 2 X 2 (M= divalent metal, X= pnictide) shows that EuZn 2 P 2 exhibits the highest ordering temperature, with variations in T N correlating with changes in expected dipolar interaction strengths within and between layers and independent of the magnitude of electrical conductivity. These results provide experimental validation of the crystochemical intuition that the cation Eu 2+ layers and the anionic (M 2 X 2 ) 2– framework can be treated as electronically distinct subunits, enabling further predictive materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Temperature-driven changes in the Fermi surface of graphite

Here we report on temperature-dependent size and anisotropy of the Fermi pockets in graphite revealed by magnetotransport measurements. The magnetoresistances (MRs) obtained in fields along the c axis obey an extended Kohler's rule, with the carrier density following the prediction of a temperature-dependent Fermi energy, indicating a change in the Fermi pocket size with temperature. The angle-dependent magnetoresistivities at a given temperature exhibit a scaling behavior. The scaling factor that reflects the anisotropy of the Fermi surface is also found to vary with temperature. Our results demonstrate that temperature-driven changes in Fermi surface can be ubiquitous and need to be considered in understanding the temperature-dependent carrier density and MR anisotropy in semimetals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Unreliability of two-band model analysis of magnetoresistivities in unveiling temperature-driven Lifshitz transition

Recently, anomalies in the temperature dependences of the carrier density and/or mobility derived from analysis of the magnetoresistivities using the conventional two-band model have been used to unveil intriguing temperature-induced Lifshitz transitions in various materials. For instance, two temperature-driven Lifshitz transitions were inferred to exist in the Dirac nodal-line semimetal ZrSiSe, based on two-band model analysis of the Hall magnetoconductivities where the second band exhibits a change in the carrier type from holes to electrons when the temperature decreases below T=106K and a dip is observed in the mobility vs temperature curve at T=80K. Here, in this study, we revisit the experiments and two-band model analysis on ZrSiSe. We show that the anomalies in the second band may be spurious because the first band dominates the Hall magnetoconductivities at T>80K, making the carrier type and mobility obtained for the second band from the two-band model analysis unreliable. That is, care must be taken in interpreting these anomalies as evidence for temperature-driven Lifshitz transitions. Our skepticism on the existence of such phase transitions in ZrSiSe is further supported by the validation of Kohler's rule for magnetoresistances for T≤180K. In this paper, we showcase potential issues in interpreting anomalies in the temperature dependence of the carrier density and mobility derived from the analysis of magnetoconductivities or magnetoresistivities using the conventional two-band model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Three-dimensional feedback processes in current-driven metal

Using three-dimensional (3D) magnetohydrodynamic simulations, we study how a pit on a metal surface evolves when driven by intense electrical current density j. Redistribution of j around the pit initiates a feedback loop: j both reacts to and alters the electrical conductivity σ, through Joule heating and hydrodynamic expansion, so that j and σ are constantly in flux. Thus, the pit transforms into larger striation and filament structures predicted by the electrothermal instability theory. Both structures are important in applications of current-driven metal: Here, the striation constitutes a density perturbation that can seed the magneto-Rayleigh-Taylor instability, while the filament provides a more rapid path to plasma formation, through 3D j redistribution. Simulations predict distinctive self-emission patterns, thus allowing for experimental observation and comparison.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Topological Hall Effect Anisotropy in Kagome Bilayer Metal Fe 3 Sn 2

Kagome lattice materials attract growing interest for their topological properties and flat-bands in electronic structure. We present comprehensive study on the anisotropy and out-of-plane electric transport in Fe 3 Sn 2 , a metal with bilayer of Fe kagome planes and with massive Dirac fermions that features high-temperature non-collinear magnetic structure and magnetic skyrmions. For the electrical current path along the c-axis, in micron-size crystals, we found a large topological Hall effect (THE) over a wide temperature range down to spin-glass state. Twofold and fourfold angular magnetoresistance are observed for different magnetic phases, reflecting the competition of magnetic interactions and magnetic anisotropy in kagome lattice that preserve robust topological Hall effect for inter kagomebilayer currents. This information provides new insight into the anisotropy in Fe 3 Sn 2 , of interest in skyrmionicbubble application-related micron-size devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Phonon-Assisted Intertube Electronic Transport in an Armchair Carbon Nanotube Film

The electrical conductivity of a macroscopic assembly of nanomaterials is determined through a complex interplay of electronic transport within and between constituent nano-objects. Phonons play dual roles in this situation: their increased populations tend to reduce the conductivity via electron scattering, while they can boost the conductivity by assisting electrons to propagate through the potential-energy landscape. Here, we identified a phonon-assisted coherent electron transport process between neighboring nanotubes in temperature-dependent conductivity measurements on a macroscopic film of armchair single-wall carbon nanotubes. Through atomistic modeling of electronic states and calculations of both electronic and phonon-assisted junction conductances, we conclude that phonon-assisted conductance is the dominant mechanism for observed high-temperature transport in armchair carbon nanotubes. The unambiguous manifestation of coherent intertube dynamics proves a single-chirality armchair nanotube film to be a unique macroscopic solid-state ensemble of nano-objects promising for the development of room-temperature coherent electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Seeding the Electrothermal Instability through a Three-Dimensional, Nonlinear Perturbation

Electrothermal instability plays an important role in applications of current-driven metal, creating striations (which seed the magneto–Rayleigh-Taylor instability) and filaments (which provide a more rapid path to plasma formation). However, the initial formation of both structures is not well understood. Here, simulations show for the first time how a commonly occurring isolated defect transforms into the larger striation and filament, through a feedback loop connecting current and electrical conductivity. Simulations have been experimentally validated using defect-driven self-emission patterns.

42 ENGINEERING↗
DOE OSTI2024

Gate-Controlled Anyon Generation and Detection in Kitaev Spin Liquids

Reliable manipulation of non-Abelian Ising anyons supported by Kitaev spin liquids may enable intrinsically fault-tolerant quantum computation. Here, we introduce a standalone scheme for both generating and detecting individual Ising anyons using tunable gate voltages in a heterostructure containing a non-Abelian Kitaev spin liquid and a monolayer semiconductor. In this study, the key ingredients of our setup are a Kondo coupling to stabilize an Ising anyon in the spin liquid around each electron in the semiconductor, and a large charging energy to allow control over the electron numbers in distinct gate-defined regions of the semiconductor. In particular, a single Ising anyon can be generated at a disk-shaped region by gate tuning its electron number to one, while it can be interferometrically detected by measuring the electrical conductance of a ring-shaped region around it whose electron number is allowed to fluctuate between zero and one. We provide concrete experimental guidelines for implementing our proposal in promising candidate materials like α-RuCl 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Plasmonics in argentene

Merging concepts from the fields of ab initio materials science and nanophotonics, there is now an opportunity to engineer new photonic materials whose optical, transport, and scattering properties are tailored to attain thermodynamic and quantum limits. Here we present first-principles calculations predicting that Argentene, a single-crystalline hexagonal close-packed monolayer of Ag, can dramatically surpass the optical properties and electrical conductivity of conventional plasmonic materials. In the low-frequency limit, we show that the scattering rate and resistivity reduce by a factor of 3 compared to the bulk three-dimensional metal. Most importantly, the low scattering rate extends to optical frequencies in sharp contrast to, e.g., graphene, whose scattering rate increase drastically in the near-infrared range due to optical-phonon scattering. Combined with an intrinsically high carrier density, this facilitates highly confined surface plasmons extending to visible frequencies. We evaluate Argentene across three distinct figures of merit, in each outperforming the state-of-the-art, making it a valuable addition to the two-dimensional heterostructure toolkit for quantum optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural features of solid-solid phase transitions and lattice dynamics in U 3 O 8

Triuranium octoxide (U 3 O 8 ) undergoes an orthorhombic to hexagonal structural phase transition near Ts=305°C, and a separate nonstructural phase transition at Tc=210°C. The later transition has previously been associated with temperature-induced fluctuations in the uranium oxidation state. A discontinuity in the slope of electrical conductivity versus temperature measurement at 210°C has supported this idea. The orthorhombic phase has three crystallographic sites in two distinct oxidation configurations [2 U(V) and 1 U(VI)], whereas the hexagonal phase has one distinct uranium site. High-resolution x-ray diffraction measurements eliminate the possibility of superlattice Bragg reflections to less than 0.2 e - scattering power and U 3 O 8 is not metallic; consequently, the presence of oxidation fluctuations is required for charge balancing. Interestingly, the order-to-disorder transition occurs at a much lower temperature than the structural transition. Using temperature-dependent x-ray diffraction and Raman spectroscopy, we show anisotropic lattice expansion in the in-plane b and c lattice constants. A specific discontinuity in the temperature derivatives of the b and c lattice constants are the first reported structural signatures of the order-to-disorder transition, suggestive of a change in local U–O coordination. Phonon frequencies of U 3 O 8 measured by Raman spectroscopy show significant temperature-dependent dynamics. Redshifting of several modes between 40 and 300°C cannot be explained by unit cell expansion alone because the unit cell volume decreases in this region. Instead, we show that phonon frequencies are highly correlated with the anisotropic lattice expansion/contraction along specific crystallographic directions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Transient electron scavengers modulate carrier density at a polar/nonpolar perovskite oxide heterojunction

Here, we show how transient electron scavengers can be utilized to control the carrier concentration at polar/non-polar perovskite interfaces. By combining quantitative synchrotron x-ray-based interface structure determination with ab initio modeling, we demonstrate that Nd vacancy formation and the resulting formation of Nd adatoms, stabilized by oxygen scavengers at the growth front, can quantitatively account for the decreased carrier concentration at the SrTiO 3 /n NdTiO 3 /SrTiO 3 (001) heterojunction for n = 1 unit cell. This study yields new insights into growth mechanisms and the effect of transient species and defects on the electronic properties of oxide heterojunctions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Porous Ti 3 AlC 2 MAX phase enables efficient synthesis of Ti 3 C 2 T x MXene

Abstract MXenes, a large family of two‐dimensional carbides and/or nitrides, are among the most studied materials worldwide due to their great diversity of structures and compositions. Their unique properties find use in several applications. Typically, they are manufactured by selective wet‐chemical etching of layered MAX phase ceramics, which are produced nowadays primarily for MXene synthesis. However, the synthesis of MAX phases has not been changed since the time of their use in structural and high‐temperature applications, and it has not been optimized for MXene manufacturing. The main purpose of this study is to develop a porous Ti 3 AlC 2 MAX phase that can be easily ground into individual grains without time‐consuming, harsh, and tedious crushing and milling steps. Moreover, we also demonstrate the synthesis of highly porous Ti 3 AlC 2 from an inexpensive titanium sponge instead of a highly pure titanium powder and explain the mechanisms of reaction sintering and formation of porous MAX phase. MXene obtained from this MAX phase, Ti 3 C 2 Tx, shows larger flake size and higher electrical conductivity in thin films, compared to the materials produced from the costly fine titanium powder. The proposed approach may apply to the synthesis of other MAX phases as well.

Materials Science↗