Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “eigenvalues”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Transonic calculation of airfoil stability and response with active controls

Transonic aeroelastic stability and response analyses are performed for the MBB A-3 supercritical airfoil. Three degrees of freedom are considered: plunge, pitch, and aileron pitch. The objective of this study is to gain insight into the control of airfoil stability and response in transonic flow. Stability analyses are performed using a Padeaeroelastic model based on the use of the LTRAN2-NLR transonic small-disturbance finite-difference computer code. Response analyses are performed by coupling the structural equations of motion to the unsteady aerodynamic forces of LTRAN2-NLR. The focus of the present effort is on transonic time-marching transient response solutions using modal identification to determine stability. Frequency and damping of these modes are directly compared in the complex s-plane with Pademodel eigenvalues. Transonic stability and response characteristics of two-dimensional airfoils are discussed and comparisons are made. Application of the Padeaeroelastic model and time-marching analyses to flutter suppression using active controls is demonstrated.

Batina, J. T.↗
NASA NTRS1983

Mechanics of composite materials: Recent advances; Proceedings of the Symposium, Virginia Polytechnic Institute and State University, Blacksburg, VA, August 16-19, 1982

The present conference on the mechanics of composites discusses microstructure's influence on particulate and short fiber composites' thermoelastic and transport properties, the elastoplastic deformation of composites, constitutive equations for viscoplastic composites, the plasticity and fatigue of metal matrix composites, laminate damping mechanisms, the micromechanical modeling of Kevlar/epoxy composites' time-dependent failure, the variational characterization of waves in composites, and computational methods for eigenvalue problems in composite design. Also discussed are the elastic response of laminates, elastic coupling nonlinear effects in unsymmetrical laminates, elasticity solutions for laminate problems having stress singularities, the mechanics of bimodular composite structures, the optimization of laminated plates and shells, NDE for laminates, the role of matrix cracking in the continuum constitutive behavior of a damaged composite ply, and the energy release rates of various microcracks in short fiber composites.

Hashin, Z.↗
NASA NTRS1984

Tearing instability in an anisotropic neutral sheet

A study is made of the collisionless tearing-mode stability properties of a field-reversed plasma layer whose temperature distribution is anisotropic. The plasma is confined by its self magnetic field with no external field. A kinetic description is used for both ions and electrons. The effects of the axis-crossing and nonaxis-crossing orbits are discussed. It is found that the conventional technique of matching the inner and outer asymptotic solutions at the electron inner-region is inadequate for the anisotropic case. An intermediate region in which the axis-crossing ion orbits are important is identified. The eigenvalue equation is solved using both analytic approximations and numerical methods to obtain the eigenmode structure and the linear dispersion relation. Previously announced in STAR as N84-14920

Chen, J.↗
NASA NTRS1984

Efficient linear and nonlinear heat conduction with a quadrilateral element

A method is presented for performing efficient and stable finite element calculations of heat conduction with quadrilaterals using one-point quadrature. The stability in space is obtained by using a stabilization matrix which is orthogonal to all linear fields and its magnitude is determined by a stabilization parameter. It is shown that the accuracy is almost independent of the value of the stabilization parameter over a wide range of values; in fact, the values 3, 2 and 1 for the normalized stabilization parameter lead to the 5-point finite difference, 9-point finite difference and fully integrated finite element operators, respectively, for rectangular meshes; numerical experiments reported here show that the three have identical rates of convergence in the L2 norm. Eigenvalues of the element matrices, which are needed for stability limits, are also given. Numerical applications are used to show that the method yields accurate solutions with large increases in efficiency, particularly in nonlinear problems.

Liu, W. K.↗
NASA NTRS1984

Reduction of satellite magnetic anomaly data

Analysis of global magnetic anomaly maps derived from satellite data is facilitated by inversion to the equivalent magnetization in a constant thickness magnetic crust or, equivalently, by reduction to the pole. Previous inversions have proven unstable near the geomagnetic equator. The instability results from magnetic moment distributions which are admissible in the inversion solution but which make only small contribution to the computed values of anomaly field. Their admissibility in the solution could result from noisy or incomplete data or from small poorly resolved anomalies. The resulting magnetic moments are unrealistically large and oscillatory. Application of the method of principal components (e.g. eigenvalue decomposition and selective elimination of less significant eigenvectors) is proposed as a way of overcoming the instability and the method is demonstrated by applying it to the region around the Bangui anomaly in Central Africa.

Slud, E. V.↗
NASA NTRS1982

Some aspects of the identification of continuous vibrating systems

This paper deals with the identification of systems described by the one-dimensional, second order wave equation. Such equations arise commonly in various areas of mathematical physics, such as, acoustics, elastic wave propagation, and electromagnetic theory. Assuming that suitable measurements are made at only one point in the spatial domain, sufficient conditions for unique identification of the system eigenvalues and system coefficients are presented.

Udwadia, F. E.↗
NASA NTRS1984

Acoustooptic linear algebra processors - Architectures, algorithms, and applications

Architectures, algorithms, and applications for systolic processors are described with attention to the realization of parallel algorithms on various optical systolic array processors. Systolic processors for matrices with special structure and matrices of general structure, and the realization of matrix-vector, matrix-matrix, and triple-matrix products and such architectures are described. Parallel algorithms for direct and indirect solutions to systems of linear algebraic equations and their implementation on optical systolic processors are detailed with attention to the pipelining and flow of data and operations. Parallel algorithms and their optical realization for LU and QR matrix decomposition are specifically detailed. These represent the fundamental operations necessary in the implementation of least squares, eigenvalue, and SVD solutions. Specific applications (e.g., the solution of partial differential equations, adaptive noise cancellation, and optimal control) are described to typify the use of matrix processors in modern advanced signal processing.

Casasent, D.↗
NASA NTRS1984

On the control canonical structure of a class of scalar input systems

A discrete finite dimensional system, nonharmonic Fourier series and controllability, reduction to canonical form, and spectral synthesis are considered. The extent to which the eigenvalue associated with a controllable pair of a certain type may be modified via continuous linear state feedback is demonstrated. Previously announced in STAR as N83-28925

Teglas, R. G.↗
NASA NTRS1983

Buckling of imperfect periodic lattice structures

A simplified buckling analysis is presented for a family of periodic lattice structures such as those proposed for large space structures. A transcendental 6 x 6 matrix of eigenvalues is shown to be sufficient for modeling buckling behavior because member stiffnesses are based on an exact solution of the beam-column equation. Exact stiffnesses are derived for a curved member, thus allowing modeling of imperfect lattice structures. Comparisons of predictions of the lattice model with those available from shell and beam theory underscore the inaccuracies introduced by treating the lattice structure as a continuum. Sample calculations are provided for an isogrid cylinder and a three element double-laced truss.

Anderson, M. S.↗
NASA NTRS1984

Effects of the motions of a platform-mounted payload on the nutational stability of a dual-spin spacecraft - A Galileo case study

In the presence of spacecraft nutation, tracking of an inertially fixed target by the Galileo scan platform requires the use of two control loops to move the scan platform and the stator in such a way as to compensate for spacecraft motion. The effect of these control loops on spacecraft nutational stability is examined using an eigenvalue analysis approach as well as several computer analysis packages. It was found that the actions of these control loops tend to drive nutation to the point of neutralizing, and even overpowering the damping actions of the spacecraft nutation damper, for pointing directions close to the spacecraft's poles. Stable and unstable zones are mapped out for two sets of spacecraft mass properties, and contributions of rotor asymmetry and stator flexibility are also discussed.

Man, G. K.↗
NASA NTRS1982

Approximating a finite element model of a hybrid deployable truss by a discrete mass model

The NASTRAN finite element model of the MSFC/hybrid deployable truss is approximated by a model consisting of four bodies serially connected by a spring hinge suspension. The truss is decomposed into four serially connected modules determining the total mass and rotational inertias for a rigid body with its mass center on the axis of the truss for each module. A five-body cantilever truss model is developed along with an undamped form of this model. Spring coefficient values are generated to match eigenvalues of the latter model with those of the NASTRAN model. Damping coefficients are then determined that provide n percent of critical damping for the model.

Chichester, F. D.↗
NASA NTRS1984

Eigenspace design of an active flutter suppression system

An active control system is designed for the suppression of wing flutter in a flight test vehicle. Eigenvalue placement is used to synthesize a full state controller which satisfies performance specifications on control surface activity and which exhibits excellent gain and phase margins. The use of limited state feedback is examined; however, it is found that a simple frequency response matching technique can be used to design a realizable compensator which reproduces the feedback properties of the full state controller. The performance of the control system using this compensator is evaluated at various flight conditions and found to be satisfactory. In addition eigenvector shaping is used to enhance the gust load alleviation capabilities of the flutter control system.

Liebst, B. S.↗
NASA NTRS1984

A solution of Mx(double dot) + Cx(dot) + Kx = 0 applicable to the design of active dampers

A solution is presented for the equations of motion for the damped linear oscillator, Mx(double dot) + Cx(dot) + Kx = 0. The algorithm solves a transformed set of equations in terms of the modal variables of the undamped system and, at the same time, solves the adjoint equation of the transformed problem. The adjoint solution is normalized to give the inverse of the solution matrix of the transformed problem. The normalized inverse is useful in design for direct computation of sensitivity derivatives of damping ratios with respect to damping rates. The algorithm is programmed to reduce storage requirements by a factor of three-fourths compared to standard complex eigenvalue subroutines. A numerical example is included.

Thurston, G. A.↗
NASA NTRS1984

Design of an optimal output feedback control system with modal insensitivity

This paper deals with the design of an output feedback controller which results in selected modal insensitivity, and at the same time optimizes a quadratic performance index representative of desired system performance for nominal plant parameter values. The approach taken here is to characterize the class of attainable eigenvectors for a given set of eigenvalues (distinct or non-distinct) which lie in a subspace called the 'Modal Insensitivity Subspace'. A constraint is established on the feedback matrix which results in modal insensitivity. Necessary conditions for optimality subject to the constraint on the feedback matrix are given. This forms the basis for a numerical algorithm to compute the optimal feedback gain which analyzed for convergence. To illustrate the procedure, a design is carried out using the lateral dynamics of an L-1011 aircraft.

Raman, K. V.↗
NASA NTRS1984

A survey of payload integration methods

Several full-scale and short-cut methods for analyzing a booster/payload system are presented. Two full-scale techniques are considered: (1) a technique that uses a restrained payload together with a free-booster model, the latter being augmented with residual mass and stiffness correction and (2) a technique that uses a restrained payload and booster model. Both techniques determine the 'modal modes', which require the solution of a system eigenvalue problem; the loads usually are then determined via an acceleration approach. A brief description is given of a number of short-cut methods which are of special interest to Shuttle payload design: structural modification, base drive, and interface impedance methods. Directions for further research and development are suggested.

Engels, R. C.↗
NASA NTRS1985

Free-Vibration Analysis of Structures

Improved numerical procedure more than twice as fast as previous methods. Unified numerical algorithm efficiently solves free-vibration problems of stationary or spinning structures with or without viscous or structural damping. Algorithm used to solve static problems involving multiple loads and to solve quadratic matrix eigenvalue problems associated with finite-dynamic-element structural discretization.

Gupta, K. K.↗
NASA NTRS1986

Modal Analysis and Gain Estimation

Interactive program yields eigenvectors, eigenvalues, and gains for feedback-control systems. Interactive Modal Analysis and Gain Estimation System (IMAGES) provides eigensystem synthesis capability to control-system engineer. IMAGES modular and flexible. Capable of both modal and spectral synthesis of multi-input control systems. IMAGES user-oriented, interactive program that frees engineer to concentrate on eigensystem synthesis. Engineer provided with scratch-pad capability that speeds control-system design.

Jones, R. L.↗
NASA NTRS1984

Squeeze-film dampers for turbomachinery stabilization

A technique for investigating the stability and damping present in centrally preloaded radially symmetric multi-mass flexible rotor bearing systems is presented. In general, one needs to find the eigenvalues of the linearized perturbation equations, though zero frequency stability maps may be found by solving as many simultaneous non-linear equations as there are dampers; and in the case of a single damper, such maps may be found directly, regardless of the number of degrees of freedom. The technique is illustrated for a simple symmetric four degree of freedom flexible rotor with an unpressurized damper. This example shows that whereas zero frequency stability maps are likely to prove to be a simple way to delineate multiple solution possibilities, they do not provide full stability information. Further, particularly for low bearing parameters, the introduction of an unpressurized squeeze film damper may promote instability in an otherwise stable system.

Mclean, L. J.↗