Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effect measure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

A flexible experimental setup for femtosecond time-resolved broad-band ellipsometry and magneto-optics

A versatile experimental setup for femtosecond time-resolved ellipsometry and magneto-optical Kerr effect measurements in the visible light range is described. The apparatus is based on the pump-probe technique and combines a broad-band probing beam with an intense near-infrared pump. According to Fresnel scattering matrix formalism, the analysis of the reflected beam at different polarization states of the incident probe light allows one to determine the diagonal and the off-diagonal elements of the dielectric tensor in the investigated sample. Moreover, the pump-probe method permits to study the dynamics of the dielectric response after a short and intense optical excitation. The performance of the experimental apparatus is tested on CrO{sub 2} single crystals as a benchmark.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radiation-produced defects in germanium: Experimental data and models of defects

The problem of radiation-produced defects in n-Ge before and after n → p conversion is discussed in the light of electrical data obtained by means of Hall effect measurements as well as Deep Level Transient Spectroscopy. The picture of the dominant radiation defects in irradiated n-Ge before n → p conversion appears to be complicated, since they turn out to be neutral in n-type material and unobserved in the electrical measurements. It is argued that radiation-produced acceptors at ≈E{sub C} – 0.2 eV previously ascribed to vacancy-donor pairs (E-centers) play a minor role in the defect formation processes under irradiation. Acceptor defects at ≈E{sub V} + 0.1 eV are absolutely dominating in irradiated n-Ge after n → p conversion. All the radiation defects under consideration were found to be dependent on the chemical group-V impurities. Together with this, they are concluded to be vacancy-related, as evidenced positron annihilation experiments. A detailed consideration of experimental data on irradiated n-Ge shows that the present model of radiation-produced defects adopted in literature should be reconsidered.

36 MATERIALS SCIENCE↗

Highly c-axis oriented GaN films grown on free-standing diamond substrates for high-power devices

Highlights: {yields} GaN films are deposited on diamond substrates by ECR-PEMOCVD. {yields} Influence of deposition temperature on the properties of samples is investigated. {yields} Properties of GaN films are dependent on the deposition temperature. -- Abstract: GaN films with highly c-axis preferred orientation are deposited on free-standing thick diamond films by low temperature electron cyclotron resonance plasma enhanced metal organic chemical vapor deposition (ECR-PEMOCVD). The TMGa and N{sub 2} are applied as precursors of Ga and N, respectively. The quality of as-grown GaN films are systematically investigated as a function of deposition temperature by means of X-ray diffraction (XRD) analysis, Hall Effect measurement (HL), room temperature photoluminescence (PL) and atomic force microscopy (AFM). The results show that the dense and uniformed GaN films with highly c-axis preferred orientation are successfully achieved on free-standing diamond substrates under optimized deposition temperature of 400 {sup o}C, and the room temperature PL spectra of the optimized GaN film show a intense ultraviolet near band edge emission and a weak yellow luminescence. The obtained GaN/diamond structure has great potential for the development of high-power semiconductor devices due to its excellent heat dissipation nature.

36 MATERIALS SCIENCE↗

Wavelength-dependent magnetic transitions of self-organized iron–aluminum stripes induced by pulsed laser irradiation

We investigate the laser wavelength dependence of structural and magnetic transitions on the surface of an iron–aluminum (FeAl) alloy induced by nanosecond pulsed laser irradiation. The formation of self-organized FeAl stripes with a wavelength-dependent period is observed in a local area on the (111)-oriented plane. Focused magneto-optical Kerr effect measurements reveal that the coercivity reaches up to 1.2 kOe with increasing the magnetic field rotation angle, which is estimated from the stripe direction, in FeAl stripes irradiated at 355 nm, and its magnetization reversal can be explained by the domain-wall motion model. On the other hand, the magnetization reversal agrees with the Stoner–Wohlfarth model in FeAl stripes irradiated at 1064 nm. This magnetic transition originates from the B2-to-A2 phase transition in stripe structures and bulk regions. These results indicate that the magnetic transition from the incoherent to coherent mode as well as the structural transformation of stripe patterns can be controlled by the incident laser wavelength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antiferromagnetism of perovskite EuZrO{sub 3}

Polycrystalline EuZrO{sub 3} has been synthesized by the solid-state reaction between EuO and ZrO{sub 2}, and its structural and magnetic properties have been investigated. Rietveld analysis of the X-ray diffraction pattern indicates that EuZrO{sub 3} crystallizes in an orthorhombic perovskite structure. {sup 151}Eu Moessbauer effect measurement reveals that almost all the europium ions are present as the divalent state and occupy distorted sites with non-axial electric field gradients, in agreement with the orthorhombic structure. In contrast to previous reports, an antiferromagnetic transition was observed around 4.1 K. The magnetic structure below the Neel temperature has been discussed. - Graphical abstract: Perovskite EuZrO{sub 3} with almost all Eu ions present as Eu{sup 2+} has been synthesized and its structure and magnetic properties have been studied. An antiferromagnetic transition was observed around 4.1 K for the first time. The mechanism of the magnetic transition has been discussed.

36 MATERIALS SCIENCE↗

A Study of H and D doped ZnO epitaxial films grown by pulsed laser deposition

We examine the crystal structure, electrical and optical properties of ZnO epitaxial films grown by pulsed laser deposition in a H2 or D2 ambient. We compared with pure ZnO films grown in O2 and vacuum. N-type electrical conductivity is enhanced by two to three orders of magnitude as a result of growing in H2 or D2. Temperature dependent Hall effect measurements reveal small (a few meV) carrier activation energies, along with carrier concentrations of 2-7 x 1018 cm-3, and mobilities of 20-40 cm2/Vs in ZnO films doped with H or D in the 1018 cm-3 range. We have modeled the low-temperature electrical properties of H- and D-doped ZnO films using variable range hopping and surface layer conductivity models, but our data do not fit well with these models. Rather, it appears that growth in H2 or D2 promotes the formation of an exceedingly shallow or conduction-band degenerate donor state, possibly associated with H or D substitution at O sites in the lattice.

36 MATERIALS SCIENCE↗

Effect of substrate temperature on the properties of transparent conductive ZnO:Al thin films prepared by RF sputtering

Transparent conductive ZnO:Al thin films were successfully deposited on glass substrates via radio frequency sputtering with a ceramic target in ambient argon. X-ray diffraction, profilometry, Hall-effect measurement, and spectrophotometry were employed to investigate the structural, electrical, and optical properties of films. The electrical and optical properties were found to be strongly dependent on the crystalline quality, grain size, and thickness of the films. X-ray diffraction spectra indicated that the crystalline quality of the films improved and grains became larger with increasing substrate temperature. Transmission spectra revealed that films possessed a higher transmittance in the visible range with an increase of the substrate temperature, but the band gap did not broaden obviously. Films with a resistivity of about 2.66 x 10{sup -4}{Omega} cm and an average transmittance above 90% in the visible range were obtained at the optimum temperature of 450 deg. C.

36 MATERIALS SCIENCE↗

Tuning the Ferromagnetic Coupling of Fe Nanodots on Cu(111) via Dimensionality Variation of the Mediating Electrons

Using in situ magneto-optical Kerr effect measurements and phenomenological modeling, we study the tunability in both the magnetization anisotropy and magnetic coupling of Fe nanodots on a curved Cu(111) substrate with varying vicinity. We observe that, as the terrace width w decreases, the magnetization anisotropy increases monotonically, faster when w is smaller than the nanodot size d. In contrast, the magnetic coupling strength also increases until w?d, after which it decreases steeply. These striking observations can be rationalized by invoking the counterintuitive dimensionality variation of the surface electrons mediating the interdot coupling: the electrons are confined to be one dimensional (1D) when w?d, but become quasi-2D when w<d due to enhanced electron spillover across the steps bridged by the nanodots.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and characterization of large-grain solid-phase crystallized polycrystalline silicon thin films

n-type polycrystalline silicon (poly-Si) films with very large grains, exceeding 30 μm in width, and with high Hall mobility of about 71.5 cm{sup 2}/V s are successfully prepared by the solid-phase crystallization technique on glass through the control of the PH{sub 3} (2% in H{sub 2})/SiH{sub 4} gas flow ratio. The effect of this gas flow ratio on the electronic and structural quality of the n-type poly-Si thin film is systematically investigated using Hall effect measurements, Raman microscopy, and electron backscatter diffraction (EBSD), respectively. The poly-Si grains are found to be randomly oriented, whereby the average area weighted grain size is found to increase from 4.3 to 18 μm with increase of the PH{sub 3} (2% in H{sub 2})/SiH{sub 4} gas flow ratio. The stress in the poly-Si thin films is found to increase above 900 MPa when the PH{sub 3} (2% in H{sub 2})/SiH{sub 4} gas flow ratio is increased from 0.025 to 0.45. Finally, high-resolution transmission electron microscopy, high angle annular dark field-scanning tunneling microscopy, and EBSD are used to identify the defects and dislocations caused by the stress in the fabricated poly-Si films.

36 MATERIALS SCIENCE↗

Effect of compressive stress on stability of N-doped p-type ZnO

Nitrogen-doped p-type zinc oxide (p-ZnO:N) thin films were fabricated on a-/c-plane sapphire (a-/c-Al{sub 2}O{sub 3}) by plasma-assisted molecular beam epitaxy. Hall-effect measurements show that the p-type ZnO:N on c-Al{sub 2}O{sub 3} degenerated into n-type after a preservation time; however, the one grown on a-Al{sub 2}O{sub 3} showed good stability. The conversion of conductivity in the one grown on c-Al{sub 2}O{sub 3} ascribed to the faster disappearance of N{sub O} and the growing N{sub 2(O)}, which is demonstrated by x-ray photoelectron spectroscopy (XPS). Compressive stress, caused by lattice misfit, was revealed by Raman spectra and optical absorption spectra, and it was regarded as the root of the instability in ZnO:N.

36 MATERIALS SCIENCE↗

Electron emission of Au nanoparticles embedded in ZnO for highly conductive oxide

We investigated the effect of embedded Au nanoparticles (Au NPs) on electrical properties of zinc oxide (ZnO) for highly conductive oxide semiconductor. Au NPs in ZnO films influenced both the structural and electrical properties of the mixture films. The electrical resistivity decreases by as much as five orders of magnitude. This is explained by the electron emission from Au NPs to the ZnO matrix. Temperature-dependent Hall effect measurements show that an electron emission mechanism changes from tunneling to thermionic emission at T = 180 K. The electron mobility in the mixture film is mainly limited by the grain boundaries at lower temperature (80-180 K), and the Au/ZnO heterogeneous interface at higher temperature (180-340 K). In addition to the electron emission, embedded Au NPs alter the ZnO matrix microstructure and improve the electron mobility. Compared to the undoped ZnO film, the carrier concentration of the Au NP-embedded ZnO film can be increased by as much as six orders of magnitude with a small change in the carrier mobility. This result suggests a way to circumvent the inherent tradeoff between the carrier concentration and the carrier mobility in transparent conductive oxide (TCO) materials.

36 MATERIALS SCIENCE↗

High-temperature treatment of In-doped CZT crystals grown by the high-pressure Bridgman method

We evaluated the effect of high-temperature treatment of Cd0.9Zn0.1Te:In single crystals using Hall-effect measurements, medium- and high-temperature annealing under various deviations from stoichiometry, and infra-red (IR) transmission microscopy Annealing at ~730 K sharply increased the electrical conductivity (by ~1-2 orders-of-magnitude). Plots of the temperature- and cadmium-pressure dependences of the electrical conductivity, carrier concentration, and mobility were obtained. Treating previously annealed Cd-samples under a Te overpressure at 1070 K allowed us to restore their resistance to its initial high values. The main difference in comparing this material with CdTe was its lowered electron density. We explained our results within the framework of Kröger’s theory of quasi-chemical reactions between point defects in solids.

60 APPLIED LIFE SCIENCES↗

MARS 2020 Backshell Radiative Heating Measurement and Shock Tube Verification

In February 2021, the Perseverance rover was brought to the surface of Mars by the Mars 2020 mission. A feature of the Mars 2020 capsule was instrumentation to measure its entry, descent and landing (EDL) with the so-called Mars EDL Instrumentation 2 (MEDLI2) [1]. The MEDLI2 introduced, among other things, backshell instrumentation, including a broadband radiometer. The radiometer was mounted on the leeside of the vehicle next to thermocouple plugs and a heat flux gauge. The data returned by the leeside MEDLI2 heat flux gauge is largely analogous to that measured by the COMARS gauge flown on the ExoMars Schiaparelli [2] entry in that it is measuring heat flux in an area that is entirely dominated by radiative heating. The COMARS measurement provided excellent validation of backshell radiative heating models for Mars entry, albeit at a limited number of points [3]. The MEDLI2 heat flux gauge measurement effectively confirmed the quality of the prediction, extended over the full trajectory, as will be presented in this paper. The MEDLI2 radiometer,however, was blocked by ablation products and suffered a loss of half of its signal. The second backshell heat flux gauge installed on the windside of the vehicle was also well predicted, although the heating had both radiative and convective contributions. It was desired to reproduce the conditions of the Mars 2020 entry via ground testing in the Electric Arc Shock Tube (EAST) at NASA Ames. Tests to verify stagnation line heating were previously reported in EAST, confirming the presence of shock layer radiation as the major discrepancy in heatshield temperature modelling [4]. Therefore, tests for stagnation line heating were not repeated. Instead, the shock tube informed bias method [5, 6] was used to identify test conditions that may produce similarity to streamlines that pass around the backside of the vehicle and are responsible for the radiation observed at the two heat flux gauge locations. This method was used to identify a range of velocities and densities in the shock tube that are relevant for confirming the radiative environment encountered. This paper reports the results obtained in the 10 cm diameter EAST shock tube, corresponding to later trajectory points at ambient pressures of 1.1-2.0 Torr and velocities from 1.2-3.5 km/s. The test series employed two primary diagnostics: emission spectroscopy and tunable diode laser absorption spectroscopy (TDLAS). The emission spectroscopy performed broadband measurements of the radiative emission of the 4.3 and 2.7 m bands of CO2 at flight similar conditions, obtaining both spectral and spatial data corresponding to the relaxation behind the shock front. The TDLAS measured the absorption of several lines of CO and CO2 and obtains species number densities and temperatures as a function of time behind the shock front. This paper will review highlights of this test series and analyses of the emission and absorption data. While the datasets generally show good agreement with predictions, a few discrepancies and items for additional investigation are identified and will be discussed

Brett A Cruden↗

Optimal Cu buffer layer thickness for growing epitaxial Co overlayers on Si(111)7 x 7

Using scanning tunneling microscopy, reflection high energy diffraction and magnetic optical Kerr effect measurements, growth mode and the magnetic properties of epitaxial Co films on Si(111) with epitaxial Cu(111) buffer layers of various thicknesses have been studied. The strained 3.5-monolayer-thick Cu/Si(111) film has been found to be an optimal buffer, in which case an almost ideal layer-by-layer like growth of Co is observed up to six Co monolayers, due to a negligible lattice mismatch. The coercivity of Co films grown in this layer-by-layer like fashion has been determined to be about 10 Oe, testifying to the high quality of the formed Co film and Co/Cu interface. Changeover of the Co film growth mode from layer-by-layer like to multilayer has been found to result in the transition of the film magnetic properties from isotropic to markedly uniaxially anisotropic.

36 MATERIALS SCIENCE↗

Magnetic Structure and Diffracted Magneto-optics of Patterned Amorphous Multilayers

We present magneto-optical Kerr effect measurements of patterned arrays of Co{sub 68}Fe{sub 24}Zr{sub 8}/Al{sub 2}O{sub 3} amorphous multilayers. The multilayers were patterned in two dimensions into two different arrangements of circular and ellipsoidal islands. Magnetization loops were recorded in a longitudinal geometry using both the specularly reflected beam as well as diffracted beams scattered off the patterned films. The magnetization of the patterned structures is significantly different from the magnetization of a continuous multilayer owing to the lateral confinement of the pattern and the introduction of additional dipolar coupling between the layers at the edges of the islands. By investigating the magnetic response at the different diffraction orders from the two different configurations of islands we are able to observe the magnetization at different length scales and determine the magnetic response of the circular and ellipsoidal islands individually.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge carrier transport properties in layer structured hexagonal boron nitride

Due to its large in-plane thermal conductivity, high temperature and chemical stability, large energy band gap (~ 6.4 eV), hexagonal boron nitride (hBN) has emerged as an important material for applications in deep ultraviolet photonic devices. Among the members of the III-nitride material system, hBN is the least studied and understood. The study of the electrical transport properties of hBN is of utmost importance with a view to realizing practical device applications. Wafer-scale hBN epilayers have been successfully synthesized by metal organic chemical deposition and their electrical transport properties have been probed by variable temperature Hall effect measurements. The results demonstrate that undoped hBN is a semiconductor exhibiting weak p-type at high temperatures (> 700 °K). The measured acceptor energy level is about 0.68 eV above the valence band. In contrast to the electrical transport properties of traditional III-nitride wide bandgap semiconductors, the temperature dependence of the hole mobility in hBN can be described by the form of μ ∝ (T/T{sub 0}){sup −α} with α = 3.02, satisfying the two-dimensional (2D) carrier transport limit dominated by the polar optical phonon scattering. This behavior is a direct consequence of the fact that hBN is a layer structured material. The optical phonon energy deduced from the temperature dependence of the hole mobility is ħω = 192 meV (or 1546 cm{sup -1}), which is consistent with values previously obtained using other techniques. The present results extend our understanding of the charge carrier transport properties beyond the traditional III-nitride semiconductors.

36 MATERIALS SCIENCE↗

Magnetooptical study of CdSe/ZnMnSe semimagnetic quantum-dot ensembles with n-type modulation doping

Magnetic and polarization investigations of the photoluminescence and resonant electron spin-flip Raman scattering in ensembles of self-organized CdSe/ZnMnSe semimagnetic quantum dots with n-type modulation doping are carried out. It is demonstrated that exciton transitions contribute to the photoluminescence band intensity, along with the transitions of trions in the singlet state. In the Hanle-effect measurements, negative circular polarization in zero magnetic field is observed, which is related to the optical orientation of a trion heavy hole. The lifetime and spin-relaxation time of a heavy hole are estimated as ≤3 and ≤1 ps, respectively. Such short times are assumed to be due to Auger recombination with the excitation of an intrinsic transition in a Mn{sup 2+} ion. Investigations of the photoluminescence-maximum intensity and shift in a longitudinal magnetic field at the σ{sup −}σ{sup +} and σ{sup −}σ{sup −} polarizations reveal the pronounced spin polarization of electrons. Under resonant excitation conditions, a sharp increase in the photoluminescence-band maximum intensity at σ{sup −} excitation polarization over the σ{sup +} one is observed. The Raman scattering peak at the electron spin-flip transition is observed upon resonant excitation in a transverse magnetic field in crossed linear polarizations. This peak is shown to be a Brillouin function of a magnetic field.

36 MATERIALS SCIENCE↗

Comparative investigation of surface transfer doping of hydrogen terminated diamond by high electron affinity insulators

We report on a comparative study of transfer doping of hydrogenated single crystal diamond surface by insulators featured by high electron affinity, such as Nb{sub 2}O{sub 5}, WO{sub 3}, V{sub 2}O{sub 5}, and MoO{sub 3}. The low electron affinity Al{sub 2}O{sub 3} was also investigated for comparison. Hole transport properties were evaluated in the passivated hydrogenated diamond films by Hall effect measurements, and were compared to un-passivated diamond films (air-induced doping). A drastic improvement was observed in passivated samples in terms of conductivity, stability with time, and resistance to high temperatures. The efficiency of the investigated insulators, as electron accepting materials in hydrogenated diamond surface, is consistent with their electronic structure. These surface acceptor materials generate a higher hole sheet concentration, up to 6.5 × 10{sup 13} cm{sup −2}, and a lower sheet resistance, down to 2.6 kΩ/sq, in comparison to the atmosphere-induced values of about 1 × 10{sup 13} cm{sup −2} and 10 kΩ/sq, respectively. On the other hand, hole mobilities were reduced by using high electron affinity insulator dopants. Hole mobility as a function of hole concentration in a hydrogenated diamond layer was also investigated, showing a well-defined monotonically decreasing trend.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗