Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed parallelization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

OAST Space Theme Workshop. Volume 3: Working group summary. 2: Data handling, communications (E-2). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

Technologies required to support the stated OAST thrust to increase information return by X1000, while reducing costs by a factor of 10 are identified. The most significant driver is the need for an overall end-to-end data system management technology. Maximum use of LSI component technology and trade-offs between hardware and software are manifest in most all considerations of technology needs. By far, the greatest need for data handling technology was identified for the space Exploration and Global Services themes. Major advances are needed in NASA's ability to provide cost effective mass reduction of space data, and automated assessment of earth looking imagery, with a concomitant reduction in cost per useful bit. A combined approach embodying end-to-end system analysis, with onboard data set selection, onboard data processing, highly parallel image processing (both ground and space), low cost, high capacity memories, and low cost user data distribution systems would be necessary.

Source record↗
NASA NTRS1978

A 1.3 centimeter wavelength interferometric study of Jupiter

Maps of the brightness distribution of Jupiter at 1.3 cm wavelength are reported for the two orthogonal linear polarizations; one approximately parallel to the equator and one approximately parallel to the pole. The synthesized beam is 6.0 arc sec by 12.0 arc sec, which provides about 55 picture elements over the visible disk. The two maps do not differ significantly. There are no small real features of the size of one resolution element with brightness greater than 6 K. The disk brightness is approximately uniform, which is consistent with saturated ammonia vapor as the source of opacity in the atmosphere. Uniformly mixed ammonia, molecular hydrogen, and methane are strongly excluded as major sources of the opacity. Forcing the maps to have symmetry about the pole, as expected for the rapidly rotating planet, reduces the residual noise level in the maps so that there appears to be a small amount of limb darkening along the equator and a small amount of brightening at the poles.

Valdes, F.↗
NASA NTRS1979

Application of satellite time transfer in autonomous spacecraft clocks

The conceptual design of a spacecraft clock that will provide a standard time scale for experimenters in future spacecraft., and can be sychronized to a time scale without the need for additional calibration and validation is described. The time distribution to the users is handled through onboard computers, without human intervention for extended periods. A group parallel binary code, under consideration for onboard use, is discussed. Each group in the code can easily be truncated. The autonomously operated clock not only achieves simpler procedures and shorter lead times for data processing, but also contributes to spacecraft autonomy for onboard navigation and data packetization. The clock can be used to control the sensor in a spacecraft, compare another time signal such as that from the global positioning system, and, if the cost is not a consideration, can be used on the ground in remote sites for timekeeping and control.

Chi, A. R.↗
NASA NTRS1981

Microwave switching power divider

A pair of parallel, spaced-apart circular ground planes define a microwave cavity with multi-port microwave power distributing switching circuitry formed on opposite sides of a thin circular dielectric substrate disposed between the ground planes. The power distributing circuitry includes a conductive disk located at the center of the substrate and connected to a source of microwave energy. A high speed, low insertion loss switching diode and a dc blocking capacitor are connected in series between the outer end of a transmission line and an output port. A high impedance, microwave blocking dc bias choke is connected between each switching diode and a source of switching current. The switching source forward biases the diodes to couple microwave energy from the conductive disk to selected output ports and, to associated antenna elements connected to the output ports to form a synthesized antenna pattern.

Stockton, R. J.↗
NASA NTRS1985

Polar plasmas as observed by Dynamics Explorers 1 and 2

Plasma measurements from the Dynamics Explorer 1 and 2 satellites were used to characterize the polar cap environment. Analysis of numerous polar-cap passes indicate that, in general, three major regimes of plasma exist: (1) polar rain--electrons with magnetosheath-like energy spectra but much lower densities, most intense near the cusp and weakening toward the central polar cap; (2) polar wind--low energy upward flowing ions with both field-aligned and conical distributions; and (3) acceleration events--sporadic events consistent with the acceleration of electrons and positive ions by parallel electric fields. (1) to (3) were observed at high altitudes by Dynamics Explorer 1, while (1) and (3) were also observed at low altitudes by Dynamics Explorer 2. The plasma parameters associated with these plasma regimes are presented and discussed in terms of source and acceleration mechanisms.

Barfield, J. N.↗
NASA NTRS1986

The tail lobe ion spectrometer

A two-dimensional kinetic 'tail lobe ion spectrometer' model for the transport of ionospheric ions from polar cleft ionosphere into the tail lobes is developed to semiquantitatively simulate the behavior of the observed O(+) ion streams in the magnetotail lobes. The consequences of the present model include: (1) the increase in velocity of the O(+) streams away from the tail midplane; (2) the existence of 'tongues' of O(+) density from the cleft ionosphere into the tail lobes whose distribution configuration depends on the convection electric field and the source thermal energies; and (3) very low parallel thermal energies and speeds in the lobes which are correlated with the parallel ion bulk velocities. These consequences are reasonably consistent with the trends in lobe streams observed by recent spacecraft.

Horwitz, J. L.↗
NASA NTRS1986

Heating of upflowing ionospheric ions on auroral field lines

The upflow of ionospheric ions along auroral field lines is investigated on the basis of nearly simultaneous particle measurements obtained with DE-1 at 9000-15,000 km and DE-2 at 400-800 km during four auroral conjunction events in 1981. The data are presented in extensive graphs and maps and characterized in detail. The distributions of the upflowing ions are shown to be consistent with acceleration of a Maxwellian by a parallel electric field, but from the energy levels involved (hundreds of eV) it is inferred that an ionospheric source is being heated within or above the acceleration region, possibly by an ion two-stream instability.

Reiff, P. H.↗
NASA NTRS1988

Ion-ion waves in the auroral region - Wave excitation and ion heating

The properties of the ion-ion mode which is excited in plasmas when two or more cold ion beams are streaming relative to one another are investigated assuming a warm electron distribution at rest (the model consistent with particle distributions observed in auroral plasma cavities). Numerical solutions are derived for the generalized electrostatic dispersion equation for parallel propagation and for oblique propagation of ion waves. It is shown that the relative ion temperature and concentration have significant effects on the stability of the accelerated plasma and the expected ion heating. Finally, a relationship between ion drift and thermal speed is derived using the marginal stability of ion-ion waves for nonzero ion temperature; the relationship was found to compare favorably with DE-1 ion observations at the high-altitude boundary of the auroral cavity.

Dusenbery, P. B.↗
NASA NTRS1990

A real time neural net estimator of fatigue life

A neural net architecture is proposed to estimate, in real-time, the fatigue life of mechanical components, as part of the Intelligent Control System for Reusable Rocket Engines. Arbitrary component loading values were used as input to train a two hidden-layer feedforward neural net to estimate component fatigue damage. The ability of the net to learn, based on a local strain approach, the mapping between load sequence and fatigue damage has been demonstrated for a uniaxial specimen. Because of its demonstrated performance, the neural computation may be extended to complex cases where the loads are biaxial or triaxial, and the geometry of the component is complex (e.g., turbopump blades). The generality of the approach is such that load/damage mappings can be directly extracted from experimental data without requiring any knowledge of the stress/strain profile of the component. In addition, the parallel network architecture allows real-time life calculations even for high frequency vibrations. Owing to its distributed nature, the neural implementation will be robust and reliable, enabling its use in hostile environments such as rocket engines. This neural net estimator of fatigue life is seen as the enabling technology to achieve component life prognosis, and therefore would be an important part of life extending control for reusable rocket engines.

Troudet, T.↗
NASA NTRS1991

Cosmos: 1989 immunology studies

The effects of flight on Cosmos mission 2044 on leukocyte subset distribution and the sensitivity of bone marrow cells to colony stimulating factor-GM were determined. A parallel study with antiorthostatic suspension was also carried out. The study involved repetition and expansion of studies performed on Cosmos 1887. Spleen and bone marrow cells were obtained from flown, vivarium control, synchronous control, and suspended rats. The cells were stained with a series of monoclonal antibodies directed against rat leukocyte cell surface antigens. Control cells were stained with a monoclonal antibody directed against an irrelevant species or were unstained. Cells were then analyzed for fluorescence using a FACSCAN flow cytometer. Bone marrow cells were placed in culture with GM-CSF in McCoy's 5a medium and incubated for 5 days. Cultures were then evaluated for the number of colonies of 50 cells or greater.

Sonnenfeld, Gerald↗
NASA NTRS1991

Flux creep in Bi2Sr2Ca1Cu2O(8+x) single crystals

Dissipative effects were investigated in Bi2Sr2Ca1Cu2O(8+x) single crystals by critical current and magnetic relaxation measurements. Activation energies for the flux motion were determined from the temperature dependence of the critical current and from the time decay of the zero field cooled and the remanent magnetization. The effective activation energy was found to increase with temperature, in agreement with the existence of a distribution of activation energies (E sub o 20 meV at 4.2 K for H + 10 kOe applied parallel to the c-axis.).

Agostinelli, E.↗
NASA NTRS1992

Three-dimensional structure of coronal mass ejections

The 3D structure of coronal mass ejections (CMEs) are examined on the basis of numerical solutions of the MHD equations. The numerical solution in a meridional plane centered over the region of newly emerged flux has features similar to those computed in previous 2D simulations. The CME is found to be shaped more like an arcade with an axis parallel to the Equator than like a bubble. This characteristic arcade shape occurs both in the density distribution in meridional and azimuthal planes and in the integrated white-light brightness in meridional and polar views. Examination of the brightness change due to the CME shows that the CME in a meridional projection as viewed from the earth has the same loop shape even if the CME originates almost directly in front of or behind the sun.

Steinolfson, R. S.↗
NASA NTRS1993

Blasim: A computational tool to assess ice impact damage on engine blades

A portable computer called BLASIM was developed at NASA LeRC to assess ice impact damage on aircraft engine blades. In addition to ice impact analyses, the code also contains static, dynamic, resonance margin, and supersonic flutter analysis capabilities. Solid, hollow, superhybrid, and composite blades are supported. An optional preprocessor (input generator) was also developed to interactively generate input for BLASIM. The blade geometry can be defined using a series of airfoils at discrete input stations or by a finite element grid. The code employs a coarse, fixed finite element mesh containing triangular plate finite elements to minimize program execution time. Ice piece is modeled using an equivalent spherical objective that has a high velocity opposite that of the aircraft and parallel to the engine axis. For local impact damage assessment, the impact load is considered as a distributed force acting over a region around the impact point. The average radial strain of the finite elements along the leading edge is used as a measure of the local damage. To estimate damage at the blade root, the impact is treated as an impulse and a combined stress failure criteria is employed. Parametric studies of local and root ice impact damage, and post-impact dynamics are discussed for solid and composite blades.

Reddy, E. S.↗
NASA NTRS1994

On bottleneck partitioning k-ary n-cubes

Graph partitioning is a topic of extensive interest, with applications to parallel processing. In this context graph nodes typically represent computation, and edges represent communication. One seeks to distribute the workload by partitioning the graph so that every processor has approximately the same workload, and the communication cost (measured as a function of edges exposed by the partition) is minimized. Measures of partition quality vary; in this paper we consider a processor's cost to be the sum of its computation and communication costs, and consider the cost of a partition to be the bottleneck, or maximal processor cost induced by the partition. For a general graph the problem of finding an optimal partitioning is intractable. In this paper we restrict our attention to the class of k-art n-cube graphs with uniformly weighted nodes. Given mild restrictions on the node weight and number of processors, we identify partitions yielding the smallest bottleneck. We also demonstrate by example that some restrictions are necessary for the partitions we identify to be optimal. In particular, there exist cases where partitions that evenly partition nodes need not be optimal.

Nicol, David M.↗
NASA NTRS1995

Ensuring correct rollback recovery in distributed shared memory systems

Distributed shared memory (DSM) implemented on a cluster of workstations is an increasingly attractive platform for executing parallel scientific applications. Checkpointing and rollback techniques can be used in such a system to allow the computation to progress in spite of the temporary failure of one or more processing nodes. This paper presents the design of an independent checkpointing method for DSM that takes advantage of DSM's specific properties to reduce error-free and rollback overhead. The scheme reduces the dependencies that need to be considered for correct rollback to those resulting from transfers of pages. Furthermore, in-transit messages can be recovered without the use of logging. We extend the scheme to a DSM implementation using lazy release consistency, where the frequency of dependencies is further reduced.

Janssens, Bob↗
NASA NTRS1999

HPF Implementation of ARC3D

We present an HPF (High Performance Fortran) implementation of ARC3D code along with the profiling and performance data on SGI Origin 2000. Advantages and limitations of HPF as a parallel programming language for CFD applications are discussed. For achieving good performance results we used the data distributions optimized for implementation of implicit and explicit operators of the solver and boundary conditions. We compare the results with MPI and directive based implementations.

Frumkin, Michael↗
NASA NTRS1996

An Evaluation of Architectural Platforms for Parallel Navier-Stokes Computations

We study the computational, communication, and scalability characteristics of a computational fluid dynamics application, which solves the time accurate flow field of a jet using the compressible Navier-Stokes equations, on a variety of parallel architecture platforms. The platforms chosen for this study are a cluster of workstations (the LACE experimental testbed at NASA Lewis), a shared memory multiprocessor (the Cray YMP), and distributed memory multiprocessors with different topologies - the IBM SP and the Cray T3D. We investigate the impact of various networks connecting the cluster of workstations on the performance of the application and the overheads induced by popular message passing libraries used for parallelization. The work also highlights the importance of matching the memory bandwidth to the processor speed for good single processor performance. By studying the performance of an application on a variety of architectures, we are able to point out the strengths and weaknesses of each of the example computing platforms.

Jayasimha, D. N.↗