SEARCH · Engineering Papers

Results for “density modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

NASA NTRS1988

A one-dimensional multispecies magnetohydrodynamic model of the dayside ionosphere of Venus

Using a modification of the one-dimensional multispecies 'one-major-ion' MHD model of Shinagawa et al. (1987), the behaviors of plasma and magnetic field in the dayside ionosphere of Venus was studied for both time-dependent and steady-state conditions. The present model is more complete than the one-major-ion model of Shinagawa et al., although a comparison of the results indicated that the one-major-ion treatment was a fairly good approximation. Two new cases are presented, including steady-state conditions for the magnetized ionosphere, and the inclusion of ion loss due to horizontal transport in the magnetized region. The resulting calculated profiles of the magnetic field and the electron density agree much better with the observations at high altitudes than those without the ion loss terms, indicating the importance of the horizontal transport processes in the ionosphere of Venus at high altitudes.

Shinagawa, H.↗

NASA NTRS1992

Airborne lidar and radiometric observations of PBL- and low clouds

Boundary layer- and low altitude clouds over open ocean and continent areas have been studied during several field campaigns since mid-1990 using the French airborne backscatter lidar LEANDRE in conjunction with on-board IR and visible radiometers. LEANDRE is an automatic system, and a modification of the instrumental parameters, when airborne, is computer controlled through an operator keyboard. The vertical range squared lidar signals and instrument status are displayed in real time on two dedicated monitors. The lidar is used either down- or up-looking while the aircraft is flying above or below clouds. A switching of the viewing configuration takes about a minute. The lidar measurements provide a high resolution description of cloud morphology and holes in cloud layers. The flights were conducted during various meteorological conditions on single or multilayer stratocumulus and cumulus decks. Analysis on a single shot basis of cloud top (or bottom) altitude and a plot of the corresponding histogram allows one to determine a probability density function (PDF). The preliminary results show the PDFs for cloud top are not Gaussian and symmetric about the mean value. The skewness varies with atmospheric conditions. An example of results recorded over the Atlantic ocean near Biarritz is displayed, showing: (1) the range squared lidar signals as a function of time (here 100 s corresponds to about 8 km, 60 shots are averaged on horizontal); the Planetary Boundary Layer (PBL) - up to 600 m - is observed at the beginning of the leg as well as on surface returns, giving an indication of the porosity; (2) the cloud top altitude variation between 2.4 to 2.8 km during the 150 to 320 s section; and (3) the corresponding PDF. Similar results are obtained on stratocumulus over land. Single shot measurements can be used also to determine an optical porosity at a small scale as well as a fractional cloudiness at a larger scale. A comparison of cloud top altitude retrieved from lidar and narrowbeam IR radiometer is conducted to study the scale integration problem. A good agreement within less than 100 m relies on spatial uniformity and an optically thick layer. In the presence of holes, a discrepancy is observed. This is illustrated in figure 2, displaying as a function of time (1) the lidar signals; (2) the target temperature (either clouds or sea surface) retreived from a narrowbeam IR radiometer, 17 C is the sea surface temperature on that day; and (3) the visible flux, linked to cloud albedo, measured by a pyranometer. In preparation of ASTEX, down- and up-looking measurements where conducted on stratocumulus clouds over the Atlantic Ocean near Quimper in Brittany. Depending on the flight pattern orientation with respect to the wind, the top and bottom cloud morphologies are different. Preliminary results are given on cloud morphology, cloud top PDFs, optical porosity, fractional cloudiness, and comparison of lidar and radiometric measurements.

Flamant, P. H.↗

DOE OSTI2020

Li-rich cathodes for rechargeable Li-based batteries: reaction mechanisms and advanced characterization techniques

Due to their high specific capacities beyond 250 mA h g -1 , lithium-rich oxides have been considered as promising cathodes for the next generation power batteries, bridging the capacity gap between traditional layered-oxide based lithium-ion batteries and future lithium metal batteries such as lithium sulfur and lithium air batteries. However, the practical application of Li-rich oxides has been hindered by formidable challenges. To address these challenges, the understanding of their electrochemical behaviors becomes critical and is expected to offer effective guidance for both materials and cell development. This work aims to provide fundamental insights into the reaction mechanisms, electrochemical challenges and modification strategies of lithium-rich oxides. We first summarize the research history, the pristine structures, and the classification of lithium-rich oxides. Then we review the critical reaction mechanisms that are closely related to their electrochemical features and performances, such as lattice oxygen oxidation, oxygen vacancy formation, transition-metal migration, layered to spinel transitions, ‘two-phase mechanism’, and lattice evolution. These discussions are coupled with state-of-the-art characterization techniques. As a comparison, the anionic redox reactions of layered sodium transition metal oxides are also discussed. Finally, after a brief overview of the correlation among the aforementioned mechanisms, we provide perspectives on the rational design of lithium-rich oxides with high energy densities and long-term cycling stability.

25 ENERGY STORAGE↗

DOE OSTI2025

Supersymmetry breaking in SYK and the black hole spectrum

The spectrum and dynamics of near-extremal black holes is strongly modified by quantum effects at low temperatures. When the extremal limit does not preserve any supersymmetry, the density of states goes to zero at extremality and no extremal black holes remain. However, when the extremal limit is supersymmetric, a large microscopic degeneracy survives and there is a gap to the first excited black hole visible from gravity. In this article we study large N quantum mechanical models where supersymmetry is explicitly broken, allowing us to interpolate between these two qualitatively different pictures. We propose and analyze deformations of N = 2 SYK models with such a pattern of (super) symmetry breaking which violate the U(1) R-symmetry. These models feature a lifting of the BPS degeneracy and a closing of the spectral gap, and we further show that the large N soft effective action is given by a modification of the N = 2 Schwarzian theory in which the U(1) R mode becomes massive.

1/N Expansion↗

DOE OSTI2026

Towards a theoretical understanding of excitonic properties of phthalocyanine thin films. I. Low-temperature exciton absorption spectra

Phthalocyanine (Pc)-based molecular thin films have emerged in recent years as a promising class of organic semiconductor materials for optoelectronic applications owing to their long exciton coherence length and fast exciton diffusion. However, the dependence of their exciton properties on the dimensionality and thermodynamic conditions, presence of metal ions, and effects of chemical modifications to the PC systems is not yet fully understood. As a first step towards a more comprehensive theoretical understanding of the excitonic properties of Pc thin films, we model their low-temperature exciton absorption spectra by employing the Frenkel Hamiltonian. The latter is derived from quantum-chemical estimates of site energies and exciton–exciton couplings. The predicted exciton absorption spectra of octabutoxy phthalocyanine (H 2 OBPc) is found to be strongly dependent on the dimensionality of the model as well as the distance cutoff for including the monomer–monomer exciton coupling. We also caution that the widely used dipole–dipole approximation could substantially overestimate the excitonic coupling between different monomers compared to a more accurate evaluation using the respective transition densities.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Controlling 4 f antiferromagnetic dynamics via itinerant electronic susceptibility

Optical manipulation of magnetism holds promise for future ultrafast spintronics, especially with lanthanides and their huge, localized 4 f magnetic moments. These moments interact indirectly by spin polarizing the conduction electrons (the Ruderman-Kittel-Kasuya-Yosida exchange interaction), influenced by interatomic orbital overlap, and the conduction electron's susceptibility around the Fermi level. Here, we study this influence in a series of 4 f antiferromagnets, Gd T 2 Si 2 ( T = Co, Rh, Ir), using ultrafast resonant x-ray diffraction. We observe a twofold increase in the ultrafast intersublattice angular momentum transfer rate between the materials, originating from modifications in the conduction electron susceptibility, as confirmed by first-principles calculations. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

DOE OSTI2024

Thermal mean-field theories

Several closely related ab initio thermal mean-field theories for fermions, both well-established and new ones, are compared with one another at the formalism level and numerically. The theories considered are Fermi–Dirac theory; thermal Hartree–Fock (HF) theory; two modifications of the thermal single-determinant and the first-order finite-temperature many-body perturbation theory based on a zero-temperature or thermal HF reference. Furthermore, thermal full-configuration-interaction theory is used as the benchmark.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2026

Development of a broadband hard x-ray radiography platform for pulsed-power experiments

In this article, we develop and demonstrate a broadband hard x-ray radiography platform at the Zebra Pulsed Power Laboratory that integrates point-projection radiography, bremsstrahlung measurements, and hard x-ray pinhole imaging, designed to diagnose current-driven, cylindrically compressed matter. Initial laser-pulsed-power coupled experiments revealed that intense background radiation generated during 1 MA Zebra current shots overwhelmed laser-produced hard x-rays, obscuring radiographic images. Using combined spectral and spatial diagnostics, we identify energetic electrons accelerated by return currents as the dominant source of background hard x-rays, with electron energies inferred to be 3–4 MeV based on Monte Carlo simulations, and demonstrate mitigation through modifications to the radiation shielding and return-current configuration. The diagnostic platform was validated using a wire-pinch hard x-ray source, allowing radiographs of static 1-mm-diameter aluminum wires to be obtained while simultaneously measuring x-ray source spectra and spatial emission distributions within a single shot. Measured wire transmission profiles were quantitatively reconstructed using radiation transport simulations that incorporate an experimentally inferred two-temperature exponential x-ray spectrum from bremsstrahlung signal analysis and spatially distributed emission sources identified by pinhole imaging. Agreement between measured and simulated transmission profiles demonstrates the validity of the radiographic and x-ray source characterization approach, establishing this diagnostic platform as a promising tool for diagnosing magnetically driven, high-density plasmas relevant to warm dense matter and inertial fusion energy research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1985

Kasei Vallis of Mars: Dating the Interplay of Tectonics and Geomorphology

Crater density age dates on more than 250 small geomorphic surfaces in the Kasei Region of Mars show clusterings indicative of times of peak geomorphic and tectonic activity. Kasei Vallis is part of a 300 km wide channel system breaching a N-S trending ancient basement high (+50,000 crater age) separating the Chryse Basin from the Tharsis Volcanic Province of Mars. The basement high was covered by a least 3 groups of probable volcanic deposits. Major regional fracturing took place at age 4,000 to 5,000 and was immediately followed by deposition of regional volcanics of the Fesenkov Plains (age 3,000 to 4,200). Younger clusterings of dates in the 900 to 1,500 and 500 to 700 range represent only minor modification of the basic tectonic geomorphic landform. The data suggest that Kasei gap is a structurally controlled breach of a buried ridge by a rather brief episode of fluvial activity.

Wise, D. U.↗

DOE OSTI2025

Engineering Electrical Transport by Implantation‐Induced Defects in CrN Films Without Affecting Thermal Conductivity

The transport properties of CrN thin films deposited on sapphire have been tailored through structural modifications induced by cumulative argon implantation. As-grown samples experience the typical structural transition in CrN films from orthorhombic at low temperature to cubic above the Néel temperature (≈280 K) and exhibit a metallic-like conduction in both phases. With increasing implantation dose, the conduction mode shifts to a semiconductor-like behavior in both phases, albeit at different damage levels. Analysis of the results suggests that hopping conduction becomes dominant beyond a given damage threshold. The results highlight a promising correlation between defect engineering and conduction mechanisms, offering valuable insights into the versatile electrical properties of CrN films. These implantation-induced defects scatter carriers, leading to a decrease in their mobility. As the implantation dose increases, the defect landscape evolves, modifying the density of states. However, up to a dose of 0.050 dpa, no significant influence on phonon scattering is observed. This approach demonstrates that ion implantation enables precise tuning of CrN's electrical properties without affecting thermal conductivity, offering valuable insights into defect engineering in transition metal nitrides and underscoring its potential for transport properties decorrelation.

defects↗

DOE OSTI2023

Robustness of electronic screening effects in electron spectroscopies: Example of V 2 O 5

In bulk and low-dimensional extended systems, the screening of excitations by the electron cloud is a key feature governing spectroscopic properties. Widely used computational approaches, especially in the framework of many-body perturbation theory, such as the GW approximation and the resulting approximate Bethe-Salpeter equation, are explicitly formulated in terms of the screened Coulomb interaction. In the present work, we explore the effect of screening in absorption and electron energy loss spectroscopy, concentrating on the effect of local distortions on the screening and elucidating the resulting changes in the various spectra. Using the layered bulk oxide V 2 O 5 as prototype material, we show in which way local distortions affect the screening, and in which way changes in the screening impact electron energy loss and absorption spectra including excitons. We highlight cancellations that make many-body effects in the spectra very robust with respect to structural modifications, while the band structure undergoes significant changes and the nature of the excitations may also be affected. Here, this yields insight concerning the structure-properties relations that are crucial for the use of V 2 O 5 as energy storage material, and more generally, that may be used to optimize the analysis and the calculation of electronic spectra in complex materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1974

Closed cycle MHD power generation experiments in the NASA Lewis Facility

Many modifications were made in the MHD facility. These include a redesign of the MHD duct interior, addition of mixing bars, increased electrical isolation of all the high temperature components from each other and from ground, and experimentation with various cesium seed vaporization and injection techniques. With the exception of the cesium system which needs further improvement the above modifications were quite successful and resulted in improvements in generator performance. The facility was run for a total of 400 hours in the past year, with 70 hours of this operation at temperatures of 2000 K or more with hot generator walls. With the exception of replacing one cracked brick in the MHD channel no repairs were required in the high temperature loop components for the duration of these tests. Uniform Faraday and Hall voltage profiles were obtained and the Faraday open circuit voltage varied from 90 to 100 percent of the ideal uBh. The magnitudes of the measured parameters are: Faraday open circuit voltage approximately 70 V, total Faraday current approximately 20 A, Hall voltage approximately 250 V, power output approximately 300 W, and power density .036 W/cu cm.

Sovie, R. J.↗

NASA NTRSDate not supplied

An Experimental System for Strategic Flight Path Management in Advanced Air Mobility

In the concept envisioned for Urban Air Mobility (UAM) operations, fleets of electric vertical takeoff and landing (eVTOL) vehicles would operate between vertiports distributed within a densely populated area. These operations would be largely independent from the existing air traffic control system and would place the responsibility for flight planning and aircraft separation on fleet operators. The fourth major level on the UAM Maturity Level scale, UML-4, relies on “collaborative and responsible” automation to enable operations in non-visual conditions with medium traffic density (hundreds of aircraft in one metropolitan region) and medium complexity. This level of service places many requirements on automation systems to assist the operators of these aircraft. NASA has developed the Autonomous Operations Planner (AOP), a reference prototype Flight Path Management automation system, and has modified AOP to support research of anticipated UML-4 operations. AOP creates a four-dimensional flight plan conforming to the constraints of these operations, evaluates and modifies the flight plan during flight as conditions and constraints evolve, and coordinates the flight plan with other airspace users and with service providers. This version of AOP has been integrated into the Sikorsky Autonomy Research Aircraft and used in a flight test activity. In this paper we discuss anticipated characteristics of UAM operations, modifications that were made to AOP to adapt to that environment or to support the flight test, and observations of software and aircraft performance during the flight test. The aircraft achieved four-dimensional conformance with the flight plan and AOP provided adequate planning in almost all cases. We discuss improvements that could be made to AOP to address deficiencies that were observed.

Autonomous Operations Planner↗

NASA NTRSDate not supplied

An Experimental System for Strategic Flight Path Management in Advanced Air Mobility

Autonomous Operations Planner↗

NASA NTRS1987

Improvements in the perturbation simulations of the global reference atmospheric model

The Global Reference Atmospheric Model (GRAM) program includes the capability for simulating pseudo-random perturbations in density, temperature, pressure, or wind components along a simulated reentry trajectory or other path through the atmosphere. Some concerns were expressed by GRAM users, however, that the mean-square perturbation gradients may be too large for small values of the vertical separation Delta z. The present GRAM perturbation simulations, based on a one-step autoregressive model, yield a power spectrum versus wavenumber k which is proportional to k sup -2 at high wavenumbers. This feature also produces mean-square perturbation differences which are directly proportional to Delta z, and mean-square perturbation gradients which are inversely proportional to Delta z. Thus, root-mean-square gradients, (Delta f/Delta z) sub rms, increase with decreasing Delta a as Delta z sup -1/2. A simple modification to GRAM is suggested which overcomes this problem, i.e., which produce root-mean-square gradient that remain bound as Delta z approaches zero. Possible applications of more sophisticated simulation approaches, e.g., second order autoregressive models, or fractal model techniques, were also explored briefly but found to yield improvements which appear too small to justify their considerable added complexity for use in the GRAM programs.

Justus, C. G.↗

NASA NTRS2016

Demonstration of Mars Crosslink Occultation Measurements for Future Small Spacecraft Constellations

Future planetary atmospheric profiling via radio occultations (RO) benefits significantly from increased received signal-to-noise ratio as well as geometrical coverage of links between two or more spacecraft in orbit around a target planet. These can be small spacecraft, possibly dedicated to quality radio-metrics with precision clock reference. Motivated by long-term research investigating the optimum SNR for the science performance, the optimum reference clock stability, the number and combination of wavelengths driving the number of transmitters and antennas, the optimum number and orbital spacecraft configuration, and design modifications to existing radio communication systems that would allow these new science objectives on future missions, three crosslink occultation experiments have been acquired between the Mars Odyssey and Mars Reconnaissance Orbiter spacecraft to probe the Martian atmosphere. While crosslink occultations between Earth orbiting satellites have long been used to profile the Earth’s atmosphere, this represents the first demonstration of crosslink occultation measurements at another planet. These measurements leverage the proximity link telecommunication payloads on each orbiter, which were designed to provide relay communication and navigation services to Mars landers and rovers. Analysis of the observed Doppler shift on each crosslink measurement reveals a clear signature of the Martian atmosphere, primarily the ionosphere. Inversion of the observed Doppler data yields vertical profiles of the Martian refractivity and electron density. The electron density profiles show the presence of two layers with peak densities and peak heights that are consistent with empirical models.

Asmar, Sami↗

DOE OSTI2021

Chemical Modifications of Ag Catalyst Surfaces with Imidazolium Ionomers Modulate H 2 Evolution Rates during Electrochemical CO 2 Reduction

Bridging polymer design with catalyst surface science is a promising direction for tuning and optimizing electrochemical reactors that could impact long-term goals in energy and sustainability. Particularly, the interaction between inorganic catalyst surfaces and organic-based ionomers provides an avenue to both steer reaction selectivity and promote activity. In this work, we studied the role of imidazolium-based ionomers for electrocatalytic CO 2 reduction to CO (CO 2 R) on Ag surfaces and found that they produce no effect on CO 2 R activity yet strongly promote the competing hydrogen evolution reaction (HER). By examining the dependence of HER and CO 2 R rates on concentrations of CO 2 and HCO 3 –, we developed a kinetic model that attributes HER promotion to intrinsic promotion of HCO 3 – reduction by imidazolium ionomers. We also show that varying the ionomer structure by changing substituents on the imidazolium ring modulates the HER promotion. This ionomer-structure dependence was analyzed via Taft steric parameters and density functional theory calculations, which suggest that steric bulk from functionalities on the imidazolium ring reduces access of the ionomer to both HCO 3 – and the Ag surface, thus limiting the promotional effect. Our results help develop design rules for ionomer–catalyst interactions in CO 2 R and motivate further work into precisely uncovering the interplay between primary and secondary coordination in determining electrocatalytic behavior.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Gravitational wave and CMB probes of axion kination

Rotations of an axion field in field space provide a natural origin for an era of kination domination, where the energy density is dominated by the kinetic term of the axion field, preceded by an early era of matter domination. Remarkably, no entropy is produced at the end of matter domination and hence these eras of matter and kination domination may occur even after Big Bang Nucleosynthesis. We derive constraints on these eras from both the cosmic microwave background and Big Bang Nucleosynthesis. We investigate how this cosmological scenario affects the spectrum of possible primordial gravitational waves and find that the spectrum features a triangular peak. We discuss how future observations of gravitational waves can probe the viable parameter space, including regions that produce axion dark matter by the kinetic misalignment mechanism or the baryon asymmetry by axiogenesis. For QCD axion dark matter produced by the kinetic misalignment mechanism, a modification to the inflationary gravitational wave spectrum occurs above 0.01 Hz and, for high values of the energy scale of inflation, the prospects for discovery are good. We briefly comment on implications for structure formation of the universe.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗