Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Emergent surface resonance from charge density wave symmetry breaking in TiSe 2

Surface confined electronic states provide a fertile ground for discovering emergent phenomena that have no counterpart in the bulk, offering new routes to manipulate correlations, symmetry breaking, and dimensionality at the atomic scale. Here, in this study, we show that charge density wave (CDW) symmetry breaking can yield surface states in 1⁢T−TiSe 2 . Micro–angle-resolved photoemission spectroscopy (µ-ARPES) resolves a sharp, two-dimensional surface resonant state (SRS) that emerges within the CDW reconstructed low energy spectrum. The SRS exhibits notable temperature dependence and its spectral weight collapses around ∼ 160 K, while CDW transition temperature 𝑇 CDW is commonly reported as ≈ 202 K. Slab DFT + 𝑈 calculations reproduce a surface localized resonance when CDW folding brings valence and conduction states into near degeneracy, suggesting a correlation tuned, surface selective origin. These results point to a form of correlation-tuned surface resonance in a layered CDW compound and suggest a framework for engineering low-dimensional quantum states in van der Waals materials via symmetry breaking and electronic structure tuning.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Operando Spectroscopic Analysis of Photovoltage Generation in Hematite Photoanodes

Solar-driven water splitting requires sufficient photovoltage to drive both water oxidation and proton reduction. Understanding the factors driving and limiting photovoltage generation is therefore crucial to optimizing photoelectrode design but has proven challenging to determine under operando conditions for photoanodes driving slow multiredox reactions such as water oxidation. In this work, operando optical spectroscopy is employed to measure the hole quasi-Fermi level (E F,p ) position in model hematite photoanodes as a function of applied bias and light intensity. The quasi-Fermi level splitting determined from these data are shown be in excellent agreement with the directly measured photovoltages, demonstrating the primarily electrochemical rather than primarily electrostatic origin of photovoltage in these photoelectrodes. E F,p pinning is observed at low light intensities and biases, indicative of hole trap states lying ∼0.2 eV above the valence band edge with a density of ∼1 nm −2 . Hole accumulation in these trap states is correlated with first order water oxidation. At higher light intensities and/or more anodic bias, E F,p becomes unpinned, assigned to saturation of these trap states, and correlated with the onset of third order water oxidation to molecular oxygen. Comparison with rate law analyses for other photoanodes indicates that such hole trap states may be a ubiquitous feature of metal oxides and suggests that materials processing strategies to suppress the density of such states would be a promising strategy to enhance photoanode performance.

Hematite↗
DOE OSTI2022

Phase IB study of ziv-aflibercept plus pembrolizumab in patients with advanced solid tumors

Background The combination of antiangiogenic agents with immune checkpoint inhibitors could potentially overcome immune suppression driven by tumor angiogenesis. We report results from a phase IB study of ziv-aflibercept plus pembrolizumab in patients with advanced solid tumors. Methods This is a multicenter phase IB dose-escalation study of the combination of ziv-aflibercept (at 2–4 mg/kg) plus pembrolizumab (at 2 mg/kg) administered intravenously every 2 weeks with expansion cohorts in programmed cell death protein 1 (PD-1)/programmed death-ligand 1(PD-L1)-naïve melanoma, renal cell carcinoma (RCC), microsatellite stable colorectal cancer (CRC), and ovarian cancer. The primary objective was to determine maximum tolerated dose (MTD) and recommended dose of the combination. Secondary endpoints included overall response rate (ORR) and overall survival (OS). Exploratory objectives included correlation of clinical efficacy with tumor and peripheral immune population densities. Results Overall, 33 patients were enrolled during dose escalation (n=3) and dose expansion (n=30). No dose-limiting toxicities were reported in the initial dose level. Ziv-aflibercept 4 mg/kg plus pembrolizumab 2 mg/kg every 2 weeks was established as the MTD. Grade ≥3 adverse events occurred in 19/33 patients (58%), the most common being hypertension (36%) and proteinuria (18%). ORR in the dose-expansion cohort was 16.7% (5/30, 90% CI 7% to 32%). Complete responses occurred in melanoma (n=2); partial responses occurred in RCC (n=1), mesothelioma (n=1), and melanoma (n=1). Median OS was as follows: melanoma, not reached (NR); RCC, 15.7 months (90% CI 2.5 to 15.7); CRC, 3.3 months (90% CI 0.6 to 3.4); ovarian, 12.5 months (90% CI 3.8 to 13.6); other solid tumors, NR. Activated tumor-infiltrating CD8 T cells at baseline (CD8+PD1+), high CD40L expression, and increased peripheral memory CD8 T cells correlated with clinical response. Conclusion The combination of ziv-aflibercept and pembrolizumab demonstrated an acceptable safety profile with antitumor activity in solid tumors. The combination is currently being studied in sarcoma and anti-PD-1-resistant melanoma. Trial registration number NCT02298959 .

Rahma, Osama E.↗
DOE OSTI2025

How the choice of exchange–correlation functional affects DFT-based simulations of the hydrated electron

Hydrated electrons are anionic species that are formed when an excess electron is introduced into liquid water. Building an understanding of how hydrated electrons behave in solution has been a long-standing effort of simulation methods, of which density functional theory (DFT) has come to the fore in recent years. The ability of DFT to model the reactive chemistry of hydrated electrons is an attractive advantage over semi-classical methodologies; however, relatively few density functional approximations (DFAs) have been used for the hydrated electron simulations presented in the literature. Here, we simulate hydrated electron systems using a series of exchange–correlation (XC) functionals spanning Jacob’s ladder. We calculate a variety of experimental and other observables of the hydrated electron and compare the XC functional dependence for each quantity. We find that the formation of a stable localized hydrated electron is not necessarily limited to hybrid XC functionals and that some hybrid functionals produce delocalized hydrated electrons or electrons that react with the surrounding water at an unphysically fast rate. Here, we further characterize how different DFAs impact the solvent structure and predicted spectroscopy of the hydrated electron, considering several methods for calculating the hydrated electron’s absorption spectrum for the best comparison between structures generated using different density functionals. None of the dozen or so DFAs that we investigated are able to correctly predict the hydrated electron’s spectroscopy, vertical detachment energy, or molar solvation volume.

Ab-initio molecular dynamics↗
DOE OSTI2022

Microstructural Development in Inconel 718 Nickel-Based Superalloy Additively Manufactured by Laser Powder Bed Fusion

Excellent weldability and high temperature stability make Inconel 718 (IN718) one of the most popular alloys to be produced by additive manufacturing. Here in this study, we investigated the effects of laser powder bed fusion (LPBF) parameters on the microstructure and relative density of IN718. The samples were fabricated with independently varied laser power (125 - 350W), laser scan speed (200 - 2200 mm/s), and laser scan rotation (0° - 90°). Archimedes’ method, optical microscopy, and scanning electron microscopy were employed to assess the influence of LPBF parameters on the relative density and microstructure. Optimal processing windows were identified for a wide range of processing parameters and relative density greater than 99.5% was achieved using volumetric energy density between 50 and 100 J/mm3. Microstructural features including melt pool geometry, lack of fusion defect, keyhole porosity, and sub-grain cellular microstructure were examined and quantified to correlate to LPBF parameters. A simple empirical model was postulated to relate relative sample density and LPBF volumetric energy density. Melt pool dimensions were quantitatively measured and compared to estimations based on Rosenthal solution, which yielded a good agreement with the width, but underestimated the depth, particularly at high energy input, due to lack of consideration for keyhole mode. In addition, the sub-grain cellular-dendritic microstructure in the as-built samples was observed to decrease with increasing laser scan speed. Quantification of the sub-micron cellular-dendritic microstructure yielded estimated cooling rate in the order of 10 5 – 10 7 K/s.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Novel phenomena in transition-metal oxide thin films and heterostructures with strong correlations and spin-orbit coupling

Transition-metal oxides have been a central subject of condensed matter physics for decades. In addition to novel electronic states driven by the influence of strong correlation, relativistic spin-orbit coupling effects have recently attracted much attention for their potential to explore topological phenomena. Here, in this article, we review various experimental and theoretical studies on transition-metal oxides with focus on thin films and heterostructures where their physics is much influenced by correlation effects and spin-orbit coupling. The combination of the heterostructure geometry together with correlation and topology leads to a variety of novel states here reviewed. We also discuss perspectives for future research in this broad promising area.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Flat bands and ferrimagnetic order in electronically correlated dice-lattice ribbons

In this work, we study ribbons of the dice two-dimensional lattice (that we call “dice ladders”) known to have nontrivial topological properties, such as Chern numbers 2. Our main results are two fold. (1) Analyzing the tight-binding model in the presence of Rashba spin-orbit coupling and an external magnetic field, we observed that dice ladders qualitatively display properties similar to their two-dimensional counterpart all the way to the limit of only two legs in the short direction. This includes flat bands near the Fermi level, edge currents and edge charge localization near zero energy when open boundary conditions are used, two chiral edge modes, and a nonzero Hall conductance. (2) We studied the effect of Hubbard correlation U in the two-leg dice ladder using Lanczos and density matrix renormalization group techniques. We show that by increasing U the flat bands split without the need of introducing external fields. Moreover, robust ferrimagnetic order develops. Overall, our work establishes dice ladders as a promising playground to study the combined effect of topology and correlation effects, one of the frontiers in quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Effect of XC functionals and dispersion corrections on the DFT‐computed structural and vibrational properties of SrCl 2 –NaCl and ZrF 4 –LiF

Density functional theory (DFT) calculations were performed to examine the impact of exchange–correlation (XC) functionals and van der Waals corrections (specifically the D3 method) on the structural and vibrational properties of the SrCl 2 –NaCl and ZrF 4 –LiF salt systems. Multiple XC functionals, including the local density approximation (LDA), the generalized gradient approximation using the Perdew–Burke–Ernzerhof (PBE) model, and its modified form suitable for solids (PBEsol), the dispersion-corrected PBE-D3 and PBEsol-D3, were considered. Of these functionals, LDA was found to exhibit the highest degree of error, while PBEsol and PBE-D3 displayed the least error. Underestimated lattice parameters compared with experimental values were observed to result in higher force constants, leading to an overprediction of vibrational frequencies. Conversely, an overestimation of lattice parameters was associated with lower vibrational frequencies. The methodology presented in this study yielded results that are in good agreement with experiment, irrespective of the method (finite differences vs. density functional perturbation theory) employed for calculating infrared and Raman spectra. It was further demonstrated that for alkali halides with weak Raman scattering, utilizing a supercell constructed from primitive cells better predicts Raman features than does the use of conventional cells.

Raman↗
DOE OSTI2020

Improving air leakage prediction of buildings using the fan pressurization method with the Weighted Line of Organic Correlation

In many countries, the fan pressurization method is the most frequently chosen approach for measuring the air leakage of houses. The measurements are usually performed at pressures that far exceed pressures to which buildings are exposed to under normal conditions. A fit of these tests to the power-law formulation allows an extrapolation to data points outside the measured pressure range. With the Ordinary Least Square (OLS) fitting method, the pressure exponent and flow coefficient can be determined. However, the measurement results are highly sensitive to uncertainties induced by external factors like changing wind conditions during the tests, which is neglected by OLS. This may lead to errors in the prediction of flows at lower pressures. The Weighted Line of Organic Correlation (WLOC) is an alternative approach and takes measurement uncertainty into account. In this paper, a statistical analysis of an extensive data set of pressurization measurements has been performed. Both regression techniques have been compared for almost 7500 fan pressurization measurements of six houses in 109 different house leak configurations. The variability in predicting pressure exponent and flow coefficient for both WLOC and OLS regression was analyzed using probability density functions. It was found that the Weighted Line of Organic Correlation significantly decreases the uncertainty in predicting pressure exponent, flow coefficient, and other low-pressure air leakage metrics compared to the Ordinary Least Square fitting. Here, the authors highly recommend the implementation of WLOC in current measurement standards and test equipment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

High strain-rate compression behavior of polymeric rod and plate Kelvin lattice structures

The compressive high strain-rate behavior of polymeric Kelvin lattice structures with rod-based or plate-based unit cells was investigated through experimental techniques and finite element simulations. Polymeric lattice structures with 5x5x5 unit cell geometries were manufactured on the millimeter scale using vat polymerization additive manufacturing and tested at low (0.001/s) and high (1000/s) strain-rates. High strain-rate experiments were performed and validated for a viscoelastic split-Hopkinson (Kolsky) pressure bar system (SHPB) coupled with high-speed imaging and digital image correlation (DIC). Experimental results at both low and high strain-rates show the formation of a localized deformation band which was more prevalent in low relative density specimens and low strain-rate experiments. Strain-rate effects of lattice specimens strongly correlate with effects of the base polymer material; both bulk polymer and lattice specimen demonstrated strain-rate hardening, strain-rate stiffening, and decreased fracture strain under dynamic loading. Results show mechanical failure properties and energy absorption depended strongly on the relative density of the lattice specimen and exhibited distinct scaling between relative density and geometry type (rod, plate) and loading rate. High relative density plate-lattices demonstrated inferior mechanical properties to rod-lattices; however, there exists a critical relative density for a given mechanical property (17%- 28%) below which plate-lattices outperform rod-lattices of similar mass. As a result, high strain-rate explicit finite element simulations were performed and showed good agreement with the mechanical failure trends and deformation modes observed in the experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Atacama Cosmology Telescope: Multiprobe cosmology with unWISE galaxies and ACT DR6 CMB lensing

We present a joint analysis of the cosmic microwave background (CMB) lensing power spectra measured from the Data Release 6 of the Atacama Cosmology Telescope (ACT) and Planck PR4, cross-correlations between the ACT and Planck lensing reconstruction and galaxy clustering from unWISE, and the unWISE clustering auto-spectrum. We obtain 1.5% constraints on the matter density fluctuations at late times parametrized by the best constrained parameter combination 𝑆$^{3⁢x⁢2⁢pt}_{8}$ ≡ 𝜎 8 ⁢(Ω 𝑚 /0.3) 0.4 = 0.815 ± 0.012. The commonly used 𝑆 8 ≡ 𝜎 8⁢ (Ω 𝑚 /0.3) 0.5 parameter is constrained to 𝑆 8 = 0.816 ± 0.015. In combination with baryon acoustic oscillation (BAO) measurements we find 𝜎 8 = 0.815 ± 0.012. We also present sound-horizon-independent estimates of the present day Hubble rate of 𝐻 0 = 66.4$^{+3.2}_{−3.7}$ km s −1 Mpc −1 from our large scale structure data alone and 𝐻 0 = 64.3$^{+2.1}_{−2.4}$ km s −1 Mpc −1 in combination with uncalibrated supernovae from Pantheon+. Using parametric estimates of the evolution of matter density fluctuations, we place constraints on cosmic structure in a range of high redshifts typically inaccessible with cross-correlation analyses. Combining lensing cross- and autocorrelations, we derive a 3.3% constraint on the integrated matter density fluctuations above 𝑧 = 2.4, one of the tightest constraints in this redshift range and fully consistent with a Λ cold dark matter (Λ⁢CDM) model fit to the primary CMB from Planck. Finally, combining with primary CMB observations and using the extended low redshift coverage of these combined datasets we derive constraints on a variety of extensions to the Λ⁢CDM model including massive neutrinos, spatial curvature, and dark energy. We find in flat Λ⁢CDM⁢ ∑𝑚 𝜈 < 0.12 eV at 95% confidence using the large scale structure data, BAO measurements from Sloan Digital Sky Survey, and primary CMB observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Atacama Cosmology Telescope DR6 and DESI: Structure growth measurements from the cross-correlation of DESI legacy imaging galaxies and CMB lensing from ACT DR6 and P l a n c k PR4

We measure the growth of cosmic density fluctuations on large scales and across the redshift range 0.3 < z < 0.8 through galaxy clustering and the cross-correlation of the ACT data release 6 cosmic microwave background (CMB) lensing map and galaxies from the Dark Energy Spectroscopic Instrument Legacy Survey, using three galaxy samples spanning the redshifts of 0.3 ≲ z ≲ 0.45 , 0.45 ≲ z ≲ 0.6 , 0.6 ≲ z ≲ 0.8 . We adopt a scale cut where nonlinear effects are negligible, so that the cosmological constraints are derived from the linear regime. We determine the amplitude of matter fluctuations over all three redshift bins using Atacama Cosmology Telescope (ACT) data alone to be S 8 ≡ σ 8 ( Ω m / 0.3 ) 0.5 = 0.772 ± 0.040 in a joint analysis combining the three redshift bins and ACT lensing alone. Using a combination of ACT and Planck data we obtain S 8 = 0.765 ± 0.032 . The lowest redshift bin used is the least constraining and exhibits a ∼ 2 σ tension with the other redshift bins; thus we also report constraints excluding the first redshift bin, giving S 8 = 0.785 ± 0.033 for the combination of ACT and Planck. This result is in excellent agreement at the 0.3 σ level with measurements from galaxy lensing, but is 1.8 σ lower than predictions based on Planck primary CMB data. Understanding whether this hint of discrepancy in the growth of structure at low redshifts arises from a fluctuation, from systematics in data, or from new physics is a high priority for forthcoming CMB lensing and galaxy cross-correlation analyses.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

A statistical approach to analyzing domain dynamics in ferroelectric crystals using X-ray photon correlation spectroscopy

Ferroelectric materials exhibit strong electromechanical coupling, largely influenced by their domain structures. Numerous microstructural studies indicate that smaller domains with higher domain wall density generally enhance domain wall motion, although some inconsistencies have been reported. In this work, we use X-ray photon correlation spectroscopy (XPCS) to probe dynamic response in Pb(Mg 1/3 Nb 2/3 )O 3 -29PbTiO 3 (PMN-29PT) single crystals under applied electric fields. We introduce a two-field correlation approach, adapted from conventional two-time correlation to quantify dynamics. Statistical analysis reveals that both [001]-oriented direct current (DC) and alternating current (AC) poled samples show Poisson-like behavior within specific electric field regions. The DC-poled samples exhibit more frequent domain wall jump events but with smaller amount of decorrelation per jump event, whereas the AC-poled samples show fewer jump events with larger decorrelation per jump event. This observation aligns with the prevalence of 109° domain walls in the AC-poled samples, which contribute to more domain wall motion. These findings provide experimental evidence of collective domain wall motion and establish a direct connection between mesoscale dynamics and electromechanical response.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Low-energy interband transition in the infrared response of the correlated metal SrVO 3 in the ultraclean limit

We studied the low-energy electronic response of the prototypical correlated metal SrVO 3 in the ultraclean and disordered limit using infrared spectroscopy and density functional theory plus dynamical mean field theory calculations (DFT+DMFT). A strong optical excitation at 70 meV is observed in the optical response of the ultraclean samples but is hidden by the low-energy Drude-like response from intraband excitations in the more disordered samples. DFT+DMFT calculations reveal that this optical excitation originates from interband transitions between the bands split by orbital off-diagonal hopping, which has often been ignored in cubic systems, such as SrVO 3 . A memory function analysis of the optical data shows that this interband transition can lead to deviations of optical self-energy from the expected Fermi-liquid behavior. Our findings demonstrate that analysis schemes employed to extract many-body effects from optical spectra may be oversimplified to study the true electronic ground state and that improvements in material quality can guide efforts to refine theoretical approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Thorium Monosilicide, ThSi: An Experimental and Theoretical Study

The present theoretical and experimental combination study investigates the ThSi molecule in detail. Computationally, we utilized high-level multireference and coupled-cluster levels of theory conjoined with large correlation consistent basis sets to study a series of electronic and spin–orbit states of ThSi. Here, we report potential energy curves (PECs), electron configurations at equilibrium distances, spectroscopic constants, energetics, and spin–orbit coupling effects for 16 electronic states of ThSi. The studied 16 electronic states are arranged tightly within 0.9 eV, highlighting the complexity of the electronic spectrum of ThSi. The ground electronic state of ThSi is a single-reference 1 1 Σ + state that derives from the 1σ 2 2σ 2 1π 4 electronic configuration. The Ω = 0 + spin–orbit ground state of ThSi is composed of 1 1 Σ + (47%) and 13Π (44%) electronic states. Our measured bond energy (D0) of ThSi, obtained using resonant two-photon ionization (R2PI) spectroscopy is 3.146(4) eV, where the assigned error limit is given in parentheses in units of the last quoted digits. The computed D0 of ThSi (Ω = 0 + ) at the CBS-C-CCSD(T)-δT(Q)-δDK-δSO level (3.181 eV) is in good agreement with the experimental value. Our derived enthalpy of formation for ThSi, Δ f H 0K o (ThSi(g)), is 971.8(6.0) kJ/mol. Finally, we have performed density functional theory (DFT) calculations for ThSi(1 1 Σ + ) using 16 exchange correlation functionals that span multiple rungs of “Jacob’s ladder” of density functional approximation (DFA) to assess the DFT errors on D 0 , r e , and ω e of ThSi with respect to experimental and ab initio coupled-cluster values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Bragg glass signatures in Pd x ErTe 3 with X-ray diffraction temperature clustering

The Bragg glass phase is a nearly perfect crystal with glassy features predicted to occur in vortex lattices and charge-density-wave systems in the presence of disorder. Detecting it has been challenging, despite its sharp theoretical definition in terms of diverging correlation lengths. Here we present bulk probe evidence supporting a Bragg glass phase in the systematically disordered charge-density-wave material of Pd x ErTe 3 . We do this by using comprehensive X-ray data and a machine-learning-based analysis tool called X-ray diffraction temperature clustering (X-TEC). We establish a diverging correlation length in samples with moderate intercalation over a wide temperature range. To enable this analysis, we introduced a high-throughput measure of inverse correlation length that we call peak spread. The detection of Bragg glass order and the resulting phase diagram advance our understanding of the complex interplay between disorder and fluctuations. Moreover, the use of our analysis technique to target fluctuations through a high-throughput measure of peak spread can revolutionize the study of fluctuations in scattering experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Cross-correlating radial peculiar velocities and CMB lensing convergence

We study, for the first time, the cross correlation between the angular distribution of radial peculiar velocities (PV) and the lensing convergence of cosmic microwave background (CMB) photons. We derive theoretical expectations for the signal and its covariance and assess its detectability with existing and forthcoming surveys. We find that such cross-correlations are expected to improve constraints on different gravitational models by partially breaking degeneracies with the matter density. We identify in the distance-scaling dispersion of the peculiar velocities the most relevant source of noise in the cross correlation. For this reason, we also study how the above picture changes assuming a redshift-independent scatter for the PV, obtained for example using a reconstruction technique. Our results show that the cross correlation might be detected in the near future combining PV measurements from DESI and the convergence map from CMB-S4. Using realistic direct PV measurements we predict a cumulative signal-to-noise ratio of approximately 3.8σ using data on angular scales 3 ≤ ℓ ≤ 200. For an idealized reconstructed peculiar velocity map extending up to redshift z = 0.15 and a smoothing scale of 4 Mpc h -1 we predict a cumulative signal-to-noise ratio of approximately 27σ from angular scales 3 ≤ ℓ ≤ 200. We conclude that currently reconstructed peculiar velocities have more constraining power than directly observed ones, even though they are more cosmological-model dependent.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Unveiling the Significance of Correlations in K-Space and Configuration Space for Drift Wave Turbulence in Tokamaks

Turbulence and transport phenomena play a crucial role in the confinement and stability of tokamak plasmas. Turbulent fluctuations in certain physical quantities, such as density or temperature fluctuations, can have a wide range of spatial scales, and understanding their correlation length is important for predicting and controlling the behavior of the plasma. The correlation length in the radial direction is identified as the critical length in real space. The dynamics in real space are of significant interest because transport in configuration space is primarily focused on them. When investigating transport caused by the E×B drift, the correlation length in real space represents the size of E×B whirls. It was numerically discovered that in drift wave turbulence, this length is inversely proportional to the normalized mode number of the fastest growing mode relative to the drift frequency. Considerable time was required before a proper analytical derivation of this condition was accomplished. Therefore, a connection has been established between phenomena occurring in real space and those occurring in k-space. Although accompanied by a turbulent spectrum in k-space with a substantial width, transport in real space is uniquely determined by the correlation length, allowing for accurate transport calculations through the dynamics of a single mode. Naturally, the dynamics are subject to nonlinear effects, with resonance broadening in frequency being the most significant nonlinear effect. Thus, mode number space is once again involved. Resonance broadening leads to the detuning of waves from particles, permitting a fluid treatment. It should be emphasized that the consideration here involves the total electric field, including the induction part, which becomes particularly important at higher beta plasmas.

Weiland, Jan (ORCID:0000000253496025)↗