Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “correlation energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Plasma sheet at lunar distance - Structure and solar-wind dependence.

Analysis of Explorer 35 observation of low-energy (0.1 to 3 keV) electrons in the distant geomagnetic tail at 60 earth radii, and comparison with the solar-wind conditions monitored simultaneously by Explorer 33. The plasma sheet extends to the lunar distance with almost the same characteristics as those observed in the near tail region; the thickness is several earth radii, and the flux, density, and energy are of the order of 10 to the 9th per sq cm per sec, 1 per cu cm, and 0.6 keV, respectively. The latitudinal boundaries of the plasma sheet are essentially parallel to magnetic-field lines. Indication is seen of the thinning of the plasma sheet during polar substorms. The average energy of electrons is correlated with the solar-wind velocity in agreement with the view that plasma-sheet electrons originate from the magnetosheath. The flux is correlated with the solar-wind dynamic pressure, reflecting the dynamic balance between the solar wind and the geomagnetic tail.

Nishida, A.↗

The correlation of sodium and potassium metabolism with the level of energy consumption in man during adaptation to heat

The sodium and potassium metabolism was studied in a thermal chamber at 35 deg and 80 percent relative humidity in 8 men for a period of 6 days. The control group (3 subjects) were outside of the chamber at a comfortable ambient temperature. The intracellular sodium and potassium metabolism were assessed based on their content in the erythrocytes. The finding was that during adaptation to heat, a considerable amount of sodium was excreted by the body in the sweat and urine (about 1/3 of the sodium content of the human body) as compared with its intake and the amount of potassium retained in the body. Changes in the concentration of sodium and potassium may serve as indexes of the state of adaptation processes during constant exposure to heat.

Afanasyev, B. G.↗

Methods of separation of variables in turbulence theory

Two schemes of closing turbulent moment equations are proposed both of which make double correlation equations separated into single-point equations. The first is based on neglected triple correlation, leading to an equation differing from small perturbed gasdynamic equations where the separation constant appears as the frequency. Grid-produced turbulence is described in this light as time-independent, cylindrically-isotropic turbulence. Application to wall turbulence guided by a new asymptotic method for the Orr-Sommerfeld equation reveals a neutrally stable mode of essentially three dimensional nature. The second closure scheme is based on an assumption of identity of the separated variables through which triple and quadruple correlations are formed. The resulting equation adds, to its equivalent of the first scheme, an integral of nonlinear convolution in the frequency describing a role due to triple correlation of direct energy-cascading.

Tsuge, S.↗

Determination of jet fuel thermal deposit rate using a modified JFTOT

Three fuels having different breakpoint temperatures were studied in the modified jet fuel thermal oxidation tester. The lower stability fuel with a breakpoint of 240 C was first stressed at a constant temperature. After repeating this procedure at several different temperatures, an Arrehenius plot was drawn from the data. The correlation coefficient and the energy of activation were calculated to be 0.97 and 8 kcal/mole respectively. Two other fuels having breakpoint temperatures of 271 C and 285 C were also studied in a similar manner. A straight line was drawn through the data at a slope equivalent to the slope of the lower stability fuel. The deposit formation rates for the three fuels were determined at 260 C, and a relative deposit formation rate at this temperature was calculated and plotted as a function of the individual fuel's breakpoint temperatures.

Nowack, C. J.↗

On the time variability of Circinus X-1 - A comparison with Cygnus X-1

The time variability and spectral characteristics obtained from Uhuru observations of Cir X-1 (4U 1515-56) are compared with observations of Cyg X-1 (4U 1956+35). It is found that Cir X-1 has a more variable spectrum (with perhaps a state over the 4 days spanned by the data), is less 'noisy', and has correlated fluctuations (as evidenced by the nonzero cross-correlation function between two energy bands) of shorter duration than those present in the shot noise of Cyg X-1.

Weisskopf, M. C.↗

Electric fields in the dayside auroral oval

The results from four independent electric field experiments flown on three Black Brant 4 rockets in the forenoon dayside auroral oval in December 1974 and January 1975 are correlated with ground-based observations and rocket particle data. The electric field varied from zero to 150 mV/m. The predominant plasma convection was toward noon along the auroral oval with a smaller component directed toward the polar cap. In one case, however, a reversal occurred within the oval with plasma convection away from noon. Comparisons with magnetometer data indicate that in the dayside auroral oval, Hall currents sometimes are responsible for magnetic fluctuations observed on the ground. Comparisons with particle data show that the magnitude of the electric fields is inversely correlated with the electron energy flux.

Jorgensen, T. S.↗

Statistical study of precipitating electrons

Energy spectra of precipitating electrons are fitted to the sum of three distributions: a power law, a Maxwellian and a Gaussian. This fitting procedure determines seven parameters which characterize the essential features of each spectrum. These characteristic parameters are used to carry out various studies involving precipitating electrons. It is shown that the absence of the power-law population from a particular spectrum is related to the softness of the precipitating primary flux, that the Maxwellian temperature and the Gaussian peak energy have a positive correlation the strength of which varies with local time, that the upward moving Gaussian population has a loss cone distribution, and that the one dimensional velocity distribution parallel to the magnetic field occasionally displays a plateau or a hump on the tail.

Fontheim, E. G.↗

Grid-generated isotropic homogeneous turbulence at high Reynolds numbers

Consideration is given to an empirical formula for the longitudinal correlation function for grid-generated incompressible fluid turbulence at Reynolds numbers above 12,800. The formula, which relates the longitudinal correlation function to the inverse cube of a dimensionless geometrical ratio, is shown to minimize the global correlation integrals into which the two-point velocity correlation tensor has been substituted subject to a global constraint on the Sobolev concomitent of the longitudinal correlation function. Furthermore, the energy spectrum function associated with the empirical formula is shown to satisfy a tertiary Helmholtz-type linear condition throughout the initial period of decay.

Rosen, G.↗

Real-time multiple-look synthetic aperture radar processor for spacecraft applications

A spaceborne synthetic aperture radar (SAR) having pipeline multiple-look data processing is described which makes use of excessive azimuth bandwidth in radar echo signals to produce multiple-looking images. Time multiplexed single-look image lines from an azimuth correlator go through an energy analyzer which analyzes the mean energy in each separate look to determine the radar antenna electric boresight for use in generating the correct reference functions for the production of high quality SAR images. The multiplexed single look image lines also go through a registration delay to produce multi-look images.

Wu, C.↗

Surface chemistry, friction and wear of Ni-Zn and Mn-Zn ferrites in contact with metals

X-ray photoelectron and Auger electron spectroscopy analysis were used in sliding friction experiments. These experiments were conducted with hot-pressed polycrystalline Ni-Zn and Mn-Zn ferrites, and single-crystal Mn-Zn ferrite in contact with various transition metals at room temperature in both vacuum and argon. The results indicate that Ni2O3 and Fe3O4 were present on the Ni-Zn ferrite surface in addition to the nominal bulk constituents, while MnO2 and Fe3O4 were present on the Mn-Zn ferrite surface in addition to the nominal bulk constituents. The coefficients of friction for the ferrites in contact with metals were related to the relative chemical activity of these metals. The more active the metal, the higher is the coefficient of friction. The coefficients of friction for the ferrites were correlated with the free energy of formation of the lowest metal oxide. The interfacial bond can be regarded as a chemical bond between the metal atoms and the oxygen anions in the ferrite surfaces. The adsorption of oxygen on clean metal and ferrite does strengthen the metal-ferrite contact and increase the friction. The ferrites exhibit local cracking and fracture with sliding under adhesive conditions. All the metals transferred to he surfaces of the ferrites in sliding.

Miyoshi, K.↗

X-ray photoelectron spectroscopy and friction studies of nickel-zinc and manganese-zinc ferrites in contact with metals

X-ray photoelectron spectroscopy analysis and sliding friction experiments were conducted with hot-pressed, polycrystalline Ni-Zn and Mn-Zn ferrites in sliding contact with various transition metals at room temperature in a vacuum of 30 nPa. The results indicate that the coefficients of friction for Ni-Zn and Mn-Zn ferrites in contact with metals are related to the relative chemical activity in these metals: the more active the metal, the higher is the coefficient of friction. The coefficients of friction for the ferrites correlate with the free energy of formation of the lowest metal oxide. The interfacial bond can be regarded as a chemical bond between the metal atoms and the oxygen anions in the ferrite surfaces. The adsorption of oxygen on clean metal and ferrite surfaces increases the coefficients of friction for the Ni-Zn and Mn-Zn ferrite-metal interfaces.

Miyoshi, K.↗

A Study of Feature Extraction Using Divergence Analysis of Texture Features

An empirical study of texture analysis for feature extraction and classification of high spatial resolution remotely sensed imagery (10 meters) is presented in terms of specific land cover types. The principal method examined is the use of spatial gray tone dependence (SGTD). The SGTD method reduces the gray levels within a moving window into a two-dimensional spatial gray tone dependence matrix which can be interpreted as a probability matrix of gray tone pairs. Haralick et al (1973) used a number of information theory measures to extract texture features from these matrices, including angular second moment (inertia), correlation, entropy, homogeneity, and energy. The derivation of the SGTD matrix is a function of: (1) the number of gray tones in an image; (2) the angle along which the frequency of SGTD is calculated; (3) the size of the moving window; and (4) the distance between gray tone pairs. The first three parameters were varied and tested on a 10 meter resolution panchromatic image of Maryville, Tennessee using the five SGTD measures. A transformed divergence measure was used to determine the statistical separability between four land cover categories forest, new residential, old residential, and industrial for each variation in texture parameters.

Hallada, W. A.↗

Surface chemistry, friction, and wear of Ni-Zn and Mn-Zn ferrites in contact with metals

X-ray photoelectron and Auger electron spectroscopy analysis were used in sliding friction experiments. These experiments were conducted with hot-pressed polycrystalline Ni-Zn and Mn-Zn ferrites, and single-crystal Mn-Zn ferrite in contact with various transition metals at room temperature in both vacuum and argon. The results indicate that Ni2O3 and Fe3O4 were present on the Ni-Zn ferrite surface in addition to the nominal bulk constituents, while MnO2 and Fe3O4 were present on the Mn-Zn ferrite surface in addition to the nominal bulk constituents. The coefficients of friction for the ferrites in contact with metals were related to the relative chemical activity of these metals. The more active the metal, the higher is the coefficient of friction. The coefficients of friction for the ferrites were correlated with the free energy of formation of the lowest metal oxide. The interfacial bond can be regarded as a chemical bond between the metal atoms and the oxygen anions in the ferrite surfaces. The adsorption of oxygen on clean metal and ferrite does strengthen the metal-ferrite contact and increase the friction. The ferrites exhibit local cracking and fracture with sliding under adhesive conditions. All the metals transferred to the surfaces of the ferrites in sliding. Previously announced in STAR as N83-19901

Miyoshi, K.↗

Investigation of cosmic rays in very short time scales

A fast databuffer system, where cosmic ray events in the Turku hadron spectrometer, including particle arrival times are recorded with time resolution of 100 ns was constructed. The databuffer can be read continuously by a microprocessor, which preanalyzes the data and transfers it to the main computer. The time span, that can be analyzed in every detail, is a few seconds. The high time resolution enables a study of time correlated groups of high energy particles. In addition the operational characteristics of the spectrometer can be monitored in detail.

Peltonen, J.↗

Graphite fiber intercalation: Basic properties of copper chloride intercalated fibers

In situ resistance measurements were used to follow the intercalation of copper chloride in pitch-based fibers. Subsequent single fiber resistivity measurements reveal a large range of resistivities, from 13 to 160 micro-ohms cm. Additional density measurements reveal a bimodal distribution of mass densities. The dense fibers have lower resistivities and correspond to the stage III compound identified by X-ray diffraction. Neither resistivity nor density correlate with diameter. Both energy dispersive spectroscopy and mass density data suggest that excess chlorine resides in the intercalated fiber, resulting in a stoichiometry of C4.9n CuCl2.5 (where n is the stage number) for the denser fibers. Finally, thermogravimetric analysis shows a 33 percent loss in mass upon heating to 700C. This loss in mass is attributed to loss of both chlorine and carbon.

Jaworske, D. A.↗

Cloud-top meridional momentum transports on Saturn and Jupiter

Cloud-tracked wind measurements reported by Sromovsky et al. were analyzed to determine meridional momentum transports in Saturn's northern middle latitudes. Results are expressed in terms of eastward and northward velocity components (u and v), and eddy components u and v. At most latitudes between 13 and 44 deg N (planetocentric), the transport by the mean flow ( ) is measurably southward, tending to support Saturn's large equatorial jet, and completely dominating the eddy transport. Meridional velocities are near zero at the peak of the relatively weak westward jet; along the flanks of that jet, measurements indicate divergent flow out of the jet. In this region the dominant eddy transport ( ) is northward on the north side of the jet, but not resolvable on the south side. Eddy transports at most other latitudes are not significantly different from measurement error. The conversion of eddy kinetic energy to mean kinetic energy, indicated by the correlation between and d /dy (where y is meridional distance) is clearly smaller than various values reported for Jupiter, and not significantly different from zero. Both Jovian and Saturnian results may be biased by the tendency for cloud tracking to favor high contrast features, and thus may not be entirely representative of the cloud level motions as a whole.

Stromovsky, L. A.↗

Energetic proton and helium fluxes associated with interplanetary shocks and their relation to the solar wind composition

The He/H ratios in particle events associated with interplanetary travelling shocks are investigated. It is found that immediately after the arrival of the shock, the about 40 keV/nucl He/H flux ratio of energetic particles of equal velocity or equal energy per charge is correlated with the He/H density ratio in the solar wind. The ambient proton flux from the parent solar particle event appears to have a significant effect on the spectral shape of the shock-associated particle spectrum above 200 keV. These observations are consistent with a first-order Fermi acceleration of these particles in which the shock-heated solar wind is the principal contributor to the shock-associated particle population.

Tan, L. C.↗

Behavior of insoluble particles during parabolic flight solidification processing of Fe-C-Si and Fe-C-V alloys

In a high-g rapid solidification environment, Fe-base alloy insoluble particles at the solidification interface may be pushed ahead of the interface or may be trapped in the solid, depending on the correlation of various interface energies, the solidification rates, and the Stokes force; particle agglomeration due to buoyancy-driven convection further complicates the problem. Attention is presently given to results obtained for directionally solidified Fe-C-Si and Fe-C-V alloys during parabolic low-g flight and ground experiments. In these systems, graphite and vanadium carbide can be considered to be the insoluble particles.

Stefanescu, D. M.↗