Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Observational tests of convective core overshooting in stars of intermediate to high mass in the Galaxy

This study presents the results of 14 tests for the presence of convective overshooting in large convecting stellar cores for stars with masses of 4-17 solar masses which are members of detached close binary systems and of open clusters in the Galaxy. A large body of theoretical and observational data is scrutinized and subjected to averaging in order to minimize accidental and systematic errors. A conservative upper limit of d/HP less than 0.4 is found from at least four tests, as well as a tighter upper limit of d/HP less than 0.2 from one good test that is subject to only mild restrictions and is based on the maximum observed effective temperature of evolved blue supergiants. It is concluded that any current uncertainty about the distance scale for these stars is unimportant in conducting the present tests for convective core overshooting. The correct effective temperature scale for the B0.5-B2 stars is almost certainly close to one of the proposed hot scales.

Stothers, Richard B.↗

Dimension statistics of rain cell cores and associated rain rate isopleths derived from radar measurements in the mid-Atlantic coast of the United States

Employing a multi-year radar database of precipitation in a mid-Atlantic coast region, the authors have characterized rain cell size statistics. The measurements were made with a high resolution, high power radar in which equicircle diameter contours of resolutions of 1 km and greater were identified out to ranges of 100 km from the radar. The rain cell was constructed by its core intensity isopleth and a family of enveloping contours having defined rain rate intervals in the regions between them. The isopleth statistics were extracted from a culled database whose cores had intensities of RLN = 7 (18-24 mm/h) and greater. This implies a bias of the statistics toward various types of convective rains generally associated with thunderstorms in the mid-Atlantic coast. Since the radar measurements were made in the mid-Atlantic coast region, the isopleth statistics may not be directly applicable to other geographic regions (such as the tropics).

Goldhirsh, Julius↗

Stellar evolution in blue populous clusters of the Small Magellanic Cloud and the problems of envelope semiconvection and convective core overshooting

New theoretical evolutionary sequences of models for stars with low metallicities, appropriate to the Small Magellanic Cloud, are derived with both standard Cox-Stewart opacities and the new Rogers-Iglesias opacities. Only those sequences with little or no convective core overshooting are found to be capable of reproducing the two most critical observations: the maximum effective temperature displayed by the hot evolved stars and the difference between the average bolometric magnitudes of the hot and cool evolved stars. An upper limit to the ratio of the mean overshoot distance beyond the classical Schwarzschild core boundary to the local pressure scale height is set at 0.2. It is inferred from the frequency of cool supergiants in NGC 330 that the Ledoux criterion, rather than the Schwarzschild criterion, for convection and semiconvection in the envelopes of massive stars is strongly favored. Residuals from the fitting for NGC 330 suggest the possibility of fast interior rotation in the stars of this cluster. NGC 330 and NGC 458 have ages of about 3 x 10 exp 7 and about 1 x 10 exp 8 yr, respectively.

Stothers, Richard B.↗

Comparison of high temperature, high frequency core loss and dynamic B-H loops of two 50 Ni-Fe crystalline alloys and an iron-based amorphous alloy

The availability of experimental data that characterize the performance of soft magnetic materials for the combined conditions of high temperature and high frequency is almost nonexistent. An experimental investigation was conducted over the temperature range of 23 to 300 C and frequency range of 1 to 50 kHz to determine the effects of temperature and frequency on the core loss and dynamic B-H loops of three different soft magnetic materials: an oriented-grain 50Ni-50Fe alloy, a nonoriented-grain 50Ni-50Fe alloy, and an iron-based amorphous material (Metglas 2605SC). A comparison of these materials shows that the nonoriented-grain 50Ni-50Fe alloy tends to have either the lowest or the next lowest core loss for all temperatures and frequencies investigated.

Wieserman, W. R.↗

Structural Efficiencies Of Fluted-Core Graphite/Epoxy Panels

Report discusses one concept providing alternative to some aluminum structural components of wings: fluted core panels made of graphite/epoxy material. Includes description of structural-efficiency study of fluted-core sandwich panels of two different configurations. Results of study compared with results of similar study of conventional aluminum panels and blade-stiffened graphite/epoxy panels.

Jegley, Dawn C.↗

Diaplectic transformation of minerals: Vorotilov drill core, Puchezh-Katunki impact crater, Russia

The Vorotilov core was drilled in the central uplift of the Puchezh-Katunki astrobleme to a depth of 5.1 km. Impactites are revealed in the rocks of the core beginning from a depth of 366 m: suevites (66 m), allogenic breccias (112 m), and autogenic breccias (deeper than 544 m). These rocks are represented by shocked-metamorphic gneisses, schists, amphibolites of Archean age, and magmatic rocks (dolerites, olivines, and peridotites) that lie between them.

Feldman, V. I.↗

Cycle 0(CY1991) NLS trade studies and analyses report. Book 1: Structures and core vehicle

This report (SR-1: Structures, Trades, and Analysis), documents the Core Tankage Trades and analyses performed in support of the National Launch System (NLS) Cycle 0 preliminary design activities. The report covers trades that were conducted on the Vehicle Assembly, Fwd Skirt, LO2 Tank, Intertank, LH2 Tank, and Aft Skirt of the NLS Core Tankage. For each trade study, a two page executive summary and the detail trade study are provided. The trade studies contain study results, recommended changes to the Cycle 0 Baselines, and suggested follow on tasks to be performed during Cycle 1.

Source record↗

Time-dependent mapping of the magnetic field at the core-mantle boundary

We consider the problem of constructing a time-dependent map of the magnetic field at the core-mantle boundary. We use almost all the available data from the last 300 years to produce two maps, one for the period 1690-1840 and the other for 1840-1990. We represent the spatial dependency of the field using spherical harmonics, the time dependency using a cubic B-spline basis, and seek the smoothest solutions compatible with the observations. We argue that, for observations from permanent magnetic observatories, the most efficient strategy is to use the first differences of annual means; for satellite data, the most efficient strategy is simply to limit the number of data used so as to minimize any tendency to map the crustal field into the core field. The resulting model fits the observatory data better than any previous model. The resulting time-dependent field map exhibits much of the same structure in the field and its secular variation identified in earlier studies.

Bloxham, Jeremy↗

Core formation by giant impacts

The present model for the timing and mechanisms of planetary core formation argues that once a planet reaches a certain minimum mass, the large impacts that are typical of late accretion can trigger core formation. This model circumvents the difficulties posed by the large-scale segregation of molten iron into diapirs, and the displacement of the cold, elastic interior of the planet by the iron. The analytical melting model used is based on the Hugoniot equations, the empirical relationship for the decline of particle velocity with distance, and the linear shock-particle velocity relationship.

Tonks, W. B.↗

Comparison of high temperature, high frequency core loss and dynamic B-H loops of a 2V-49Fe-49Co and a grain oriented 3Si-Fe alloy

The design of power magnetic components such as transformers, inductors, motors, and generators, requires specific knowledge about the magnetic and electrical characteristics of the magnetic materials used in these components. Limited experimental data exists that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency over a wide flux density range. An experimental investigation of a 2V-49-Fe-49Co (Supermendur) and a grain oriented 3 Si-Fe (Magnesil) alloy was conducted over the temperature range of 23 to 300 C and frequency range of 0.1 to 10 kHz. The effects of temperature, frequency, and maximum flux density on the core loss and dynamic B-H loops for sinusoidal voltage excitation conditions are examined for each of these materials. A comparison of the core loss of these two materials is also made over the temperature and frequency range investigated.

Wieserman, W. R.↗

A study of the earth's free core nutation using international deployment of accelerometers gravity data

In this study we consider the influence of the earth's free core nutation (FCN) on diurnal tidal admittance estimates for 11 stations of the globally distributed International Deployment of Accelerometers network. The FCN causes a resonant enhancement of the diurnal admittances which can be used to estimate some properties of the FCN. Estimations of the parameters describing the FCN (period, Q, and resonance strength) are made using data from individual stations and many stations simultaneously. These yield a result for the period of 423-452 sidereal days, which is shorter than theory predicts but is in agreement with many previous studies and suggests that the dynamical ellipticity of the core may be greater than its hydrostatic value.

Cummins, Phil R.↗

High-resolution imaging of globular cluster cores

An approach based on the maximum entropy method aimed at increasing angular resolution to study globular cluster cores is presented. To perform the image restoration the Gull-Skilling (1989) MEMSYS-3 code for maximum entropy reconstruction of arbitrary data sets was used. This software was recently applied to restoration of ESO images of the R136 object in the core of the 30 Doradus nebula. It was demonstrated that the software made it possible to restore an image at subpixel spatial scales which facilitates the detection of very high-resolution structure in the restored image.

Weir, N.↗

Dense cores in dark clouds. VIII - Velocity gradients

An analysis of motions consistent with uniform rotation in dense cores is presented. Twenty-nine of the 43 cores studied have a statistically significant gradient. Some gradients are spatially continuous and are consistent with uniform rotation, but other apparent gradients are caused by clump-clump motion, or sharp localized gradients, within a map. The motions in L1495, B217, L1251, L43, B361, and L1551 are discussed in detail. In L1551, the residuals of the fit to the NH3 velocity field indicate an outflow from IRS5 in the same direction as the CO outflow. Gradient orientation appears to be preserved over a range of density, as evidenced by comparing results of NH3 to fits of (C-18)O and CS maps. The specific angular momentum is found to scale roughly as F exp 3/2, where R represents the diameter of the FWHM intensity contour in a map.

Goodman, A. A.↗

A flattened cloud core in NGC 2024

The (J, K) (1, 1) and (2, 2) NH3 lines were mapped toward a molecular cloud core in NGC 2024 using the VLA in its C/D-configuration. This region is associated with one of the most highly collimated molecular outflows. We find that the molecular condensations associated with the far-infrared sources FIR 5, FIR 6, and FIR 7 have kinetic temperatures of about 40 K. We also find line broadening toward FIR 6 and FIR 7. This suggests that these condensations may not be protostars heated by gravitational energy released during collapse but that they have an internal heating source. A flattened structure of ammonia emission is found extending parallel to the unipolar CO outflow structure, but displaced systematically to the east. If the NH3 emission traces the denser gas environment, there is no evidence that a dense gas structure is confining the molecular outflow. Instead, the location of the high-velocity outflow along the surface of the NH3 structure suggests that a wind is sweeping material from the surface of this elongated cloud core.

Ho, Paul T. P.↗

Explosive volcanism and the compositions of cores of differentiated asteroids

Eleven iron meteorite groups show correlations between Ni and siderophile trace elements that are predictable by distribution coefficients between liquid and solid metal in fractionally crystallizing metal magmas. These meteorites are interpreted to be fragments of the fractionally crystallized cores of eleven differentiated asteroids. Many of these groups crystallized from S-depleted magmas which we propose resulted from removal of the first partial melt (the Fe,Ni-FeS cotectic melt) by explosive pyroclastic volcanism of the type envisaged by Wilson and Keil (1991). We show that these dense, negatively buoyant melts can be driven to asteroidal surfaces due to the presence of excess pressure in the melt and the presence of buoyant bubbles of gas which decrease the density of the melt. We also show that, in typical asteroidal materials, veins will form which grow into dikes and serve as pathways for migration of melt and gas to asteroidal surfaces. Since cotectic Fe, Ni-FeS melt consists of about 85 wt pct FeS and 15 wt pct Fe, Ni, removal of small volumes of eutectic melts results in major loss of S but only minor loss of Fe,Ni, thus leaving sufficient Fe,Ni to form sizeable asteroidal cores.

Keil, Klaus↗

Image restoration of R136 - The dense core of NGC 2070

We present results from the application of a new seeing deconvolution technique to images of the dense core of NGC 2070 = 30 Doradus (the controversial object R136a). We utilize a new maximum entropy algorithm capable of restoring images to very high resolution, even to subpixel accuracy. Images of the object in different colors, as well as comparisons with previous speckle results, have been used to check the validity of the results. Our images of R136 have an angular resolution approaching 0.2 arcsec, better than any direct images of this object published to date, and corroborate evidence that R136a is a dense star cluster core, rather than a single ultraluminous object.

Weir, N.↗

Two-mode elliptical-core weighted fiber sensors for vibration analysis

Two-mode, elliptical-core optical fibers are demonstrated in weighted, distributed and selective vibration-mode-filtering applications. We show how appropriate placement of optical fibers on a vibrating structure can lead to vibration mode filtering. Selective vibration-mode suppression on the order of 10 dB has been obtained using tapered two-mode, circular-core fibers with tapering functions that match the second derivatives of the modes of vibration to be enhanced. We also demonstrate the use of chirped, two-mode gratings in fibers as spatial modal sensors that are equivalents of shaped piezoelectric sensors.

Vengsarkar, Ashish M.↗

Chemical fractionations in group IIIAB iron meteorites - Origin by dendritic crystallization of an asteroidal core

Results of an investigation of the crystallization history of the asteroidal core that produced nearly 200 iron meteorites of group IIIAB are presented. The accuracy of the published distribution of coefficients between solid and liquid metal for seven elements and their dependence on the concentrations of S and P are critically assessed to develop a nonideal fractional crystallization model that reproduces all of the major features of the overall chemical trends in group IIIAB. It is suggested that the apparent distribution coefficient of S was was much higher than its equilibrium value (not greater than 0.01) and that it increased during crystallization. In the present preferred model the apparent distribution coefficient for S increases from 0.6 to 0.8, while the S concentration of the liquid increases from 6 to 13 wt pct. It is inferred that light S-rich liquid accumulates preferentially at the top of the core and in structural traps formed by the advancing solid.

Haack, Henning↗