Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “construction type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

The impact of simplified window and exhaust fan assumptions on indoor air quality in multifamily buildings

In residential buildings, the indoor air quality can be significantly affected by ventilation measures initiated by occupants, including the operation of windows and in-unit exhaust fans in kitchens and bathrooms. Many simulations simplify these factors by disregarding window opening behaviors and using fixed schedules for exhaust fan operation across all residential units. To estimate the impact of these simplifications in the U.S. context, this study used coupled CONTAM and EnergyPlus models to simulate airflow and contaminant transport in multifamily buildings. The coupled models parametrically varied climate zone, building airtightness, and mechanical ventilation system types. The study conducted a sensitivity analysis on two key occupant behaviors: (1) operating kitchen and bathroom exhausts on different schedules in individual dwelling units, and (2) scheduling open windows on ground and top floors. The simplified assumptions (i.e. uniform in-unit exhaust fan operation and window operation) had a minimal impact on inter-unit air flow and contaminant transport simulations across a broad range of building air leakage and mechanical ventilation system types. These findings suggest that for buildings with tight construction it is reasonable for most modelling and simulation efforts to ignore the effects of non-uniform exhaust fan operation and window opening.

Occupant behavior↗

PROBING INTERSTELLAR DUST WITH INFRARED ECHOES FROM THE Cas A SUPERNOVA

We present the analysis of an Infrared Spectrograph 5-38 {mu}m spectrum and Multiband Imaging Photometer for Spitzer photometric measurements of an infrared echo near the Cassiopeia A (Cas A) supernova (SN) remnant observed with the Spitzer Space Telescope. We have modeled the recorded echo accounting for polycyclic aromatic hydrocarbons (PAHs), quantum-heated carbon and silicate grains, as well as thermal carbon and silicate particles. Using the fact that optical light-echo spectroscopy has established that Cas A originated from a Type IIb SN explosion showing an optical spectrum remarkably similar to the prototypical Type IIb SN 1993J, we use the latter to construct template data input for our simulations. We are then able to reproduce the recorded infrared echo spectrum by combining the emission of dust heated by the UV burst produced at the shock breakout after the core-collapse and dust heated by optical light emitted near the visual maximum of the SN light curve, where the UV burst and optical light curve characteristics are based on SN 1993J. We find a mean density of {approx}680 H cm{sup -3} for the echo region, with a size of a few light years across. We also find evidence of dust processing in the form of a lack of small PAHs with less than {approx}300 carbon atoms, consistent with a scenario of PAHs destruction by the UV burst via photodissociation at the estimated distance of the echo region from Cas A. Furthermore, our simulations suggest that the weak 11 {mu}m features of our recorded infrared echo spectrum are consistent with a strong dehydrogenated state of the PAHs. This exploratory study highlights the potential of investigating dust processing in the interstellar medium through infrared echoes.

79 ASTRONOMY AND ASTROPHYSICS↗

A unified pseudo- C ℓ framework

The pseudo- C ℓ is an algorithm for estimating the angular power and cross-power spectra that is very fast and in realistic cases also nearly optimal. The algorithm can be extended to deal with contaminant deprojection and E/B purification, and can therefore be applied in a wide variety of scenarios of interest for current and future cosmological observations. This paper presents NAMASTER, a public, validated, accurate and easy-to-use software package that, for the first time, provides a unified framework to compute angular cross-power spectra of any pair of spin-0 or spin-2 fields, contaminated by an arbitrary number of linear systematics and requiring B- or E-mode purification, both on the sphere or in the flat-sky approximation. We describe the mathematical background of the estimator, including all the features above, and its software implementation in NAMASTER. We construct a validation suite that aims to resemble the types of observations that next-generation large-scale structure and ground-based CMB experiments will face, and use it to show that the code is able to recover the input power spectra in the most complex scenarios with no detectable bias. NAMASTER can be found at https://github.com/LSSTDESC/NaMaster, and is provided with comprehensive documentation and a number of code examples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantization of the Maxwell fish-eye problem and the quantum-classical correspondence

The so-called fish-eye model, originally investigated by Maxwell in geometrical optics, is studied both in the classical as well as in the quantum formulations. The best agreement between the two approaches is achieved by using a suitably constructed coherent state, which is of the SU(2) type. The perfect quantum-classical correspondence is obtained in the sense that classical rays go exactly over maxima of the corresponding quantum probability distributions. The distributions are made of linear combinations of the E=0 bound states of the considered model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Configuration mixing within the energy density functional formalism: Removing spurious contributions from nondiagonal energy kernels

Multi reference calculations along the lines of the generator coordinate method or the restoration of broken symmetries within the nuclear energy density functional (EDF) framework are becoming a standard tool in nuclear structure physics. These calculations rely on the extension of a single-reference energy functional, of the Gogny or the Skyrme types, to nondiagonal energy kernels. There is no rigorous constructive framework for this extension so far. The commonly accepted way proceeds by formal analogy with the expressions obtained when applying the generalized Wick theorem to the nondiagonal matrix element of a Hamilton operator between two product states. It is pointed out that this procedure is ill defined when extended to EDF calculations as the generalized Wick theorem is taken outside of its range of applicability. In particular, such a procedure is responsible for the appearance of spurious divergences and steps in multi reference EDF energies, as was recently observed in calculations restoring particle number or angular momentum. In the present work, we give a formal analysis of the origin of this problem for calculations with and without pairing, i.e., constructing the density matrices from either Slater determinants or quasiparticle vacua. We propose a method to regularize nondiagonal energy kernels such that divergences and steps are removed from multi reference EDF energies. Such a removal is a priori quasiparticle-basis dependent. A special feature of the method we use to proceed to the actual regularization is that it singles out one basis among all possible ones. The regularization method is applicable to calculations based on any symmetry restoration or generator coordinate but is limited to EDFs depending only on integer powers of the normal and anomalous density matrices. Eventually, the method is formally illustrated for particle-number restoration and is specified to configuration mixing calculations based on Slater determinants.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

8-Spinors and structure of solitons in generalized Mie electrodynamics

A generalization of Mie electrodynamics is considered. It includes a 8-spinor field and higher powers of the Mie invariant A{sub {mu}}A{sup {mu}}. Particular topological properties of 8-spinors are indicated and are associated with the existence of the remarkable Brioschi identity of eight squares, which permits deriving a natural 8-spinor unification of the Skyrme model of baryons and the Faddeev model of leptons, these particles being treated as topological solitons. Two types of soliton configurations admitted by the model are constructed. These are charged static and neutral lightlike (luxons) ones.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Experimental Investigation of Distributed Acoustic Sensing (DAS) on Lake Ice

A vibration-sensitive, Distributed Acoustic Sensor (DAS) array, using fiber-optic cables, was deployed in a triangularly shaped geometry on the frozen surface of Lake Mendota in Madison, Wisconsin, USA. The purpose of the array and testing program was to analyze the DAS response and to utilize the high spatial density of the distributed array for system response characterization in a well-constrained, small, surface array. A geophone array was also deployed to provide a reference system. The design of the array allowed us to assess the response of DAS with respect to distance from the seismic sources, the degradation of the response with length of the cable, the directivity of the fiber response with respect of the direction of the particle motion, and the quality of the signal with respect to cable type. The DAS array was examined for different cable constructions and orientations relative to the source propagation direction. Tight-buffered and loose-tube fiber-optic cable constructions were used, with both having good signal responses when well-coupled to the ice. In general, the tight-buffered cable was better suited for DAS applications. Directional sensitivity of the DAS was also inspected for several directions of wave propagation and particle motion. The results showed that the strongest DAS signals were recorded when the direction of the fiber was oriented parallel to the direction of particle motion. Lastly, the DAS and geophone data sets were examined together to qualitatively determine, in conjunction with established DAS best practices, how the high spatial density offered by DAS could improve results over traditional point sensor arrays in certain situations.

15 GEOTHERMAL ENERGY↗

MCNP Intrinsic Source Constructor (MISC): A User’s Guide

The MCNP Intrinsic Source Constructor (MISC) facilitates the construction of MCNP source definition cards for radioactive materials. Given a material nuclide specification, either weight or atom fractions of those nuclides, and either a weight or atom density of the material, MISC will construct the source spectrum distribution of a specified particle type. MISC also calculates the absolute number of particles emitted per second per unit mass or volume. Furthermore, if decay chain information is available in the data sets selected by the user, the initial isotopes specified by the user can be approximately decayed to the resulting isotopes after a specified amount of time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Commercial Building Energy Code Field Study: Data Collection Methodology and Protocol

In support of the U.S. Department of Energy’s Commercial Buildings Energy Code Field Study, this data collection methodology and protocol provides guidance on all aspects of undertaking a compliance study, from development of a sampling plan to recruitment to code requirements and compliance checks for each energy code measure specified to be collected. The protocol also includes a data collection form that captures all key information needed for analysis of commercial energy code compliance. This methodology was developed by the Institute for Market Transformation in coordination with Pacific Northwest National Laboratory (PNNL) and the U.S. Department of Energy Building Energy Codes Program with the objective of assisting states, jurisdictions, utilities and others as they seek to measure and demonstrate compliance rates with energy codes in commercial buildings, as well as to target areas for improvement through increased energy code compliance and broader energy-efficiency programs. It is also intended to facilitate a consistent and replicable approach to research studies of this type and establish a transparent data set representing baseline construction practices across the U.S.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Commercial Building Energy Code Field Study: Data Collection Methodology and Protocol

In support of the U.S. Department of Energy’s Commercial Buildings Energy Code Field Study, this data collection methodology and protocol provides guidance on all aspects of undertaking a compliance study, from development of a sampling plan to recruitment to code requirements and compliance checks for each energy code measure specified to be collected. The protocol also includes a data collection form that captures all key information needed for analysis of commercial energy code compliance. This methodology was developed by the Institute for Market Transformation in coordination with Pacific Northwest National Laboratory (PNNL) and the U.S. Department of Energy Building Energy Codes Program with the objective of assisting states, jurisdictions, utilities and others as they seek to measure and demonstrate compliance rates with energy codes in commercial buildings, as well as to target areas for improvement through increased energy code compliance and broader energy-efficiency programs. It is also intended to facilitate a consistent and replicable approach to research studies of this type and establish a transparent data set representing baseline construction practices across the U.S.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Application of Field Protective Coatings over Pipeline Girth Welds

This document provides guidance for the application of two types of field protective coating on a pipeline during construction, after completion of girth weld, to mitigate external corrosion. Steel alloy B9 is applied using electric arc welding and aluminum alloy 5356 is applied using thermal spray.

03 NATURAL GAS↗

Methods for Assessing Opportunities for Ring Dam Pumped Storage Hydropower

There is growing interest in new pumped storage hydropower (PSH) deployment to provide a range of grid flexibility, reliability, and resiliency services under an evolving and uncertain future power sector. The National Laboratory of the Rockies develops open PSH resource assessment and cost modeling tools to help evaluate PSH deployment opportunities, and this report describes expansions to those tools to consider an additional PSH system configuration - ring-dam reservoirs built on flat topographical features that are constructed from roller-compacted concrete material. This reservoir type is common among current PSH proposals and requires new methods to identify sites with this reservoir geometry throughout the United States and characterize the associated dam cost. Cost characterization for ring dam reservoirs required collecting historical dam cost data for earthen, rockfill, and roller-compacted concrete dams and regressing equations that relate costs between alternative materials. The ring dam site identification algorithm follows a 5-step procedure to identify circular geometry reservoirs. Once ring dam reservoirs are identified, they are then paired with potential dry-gully reservoirs, and the full set of potential paired reservoirs is cost-optimized to produce a least-cost set of potential PSH sites with no overlapping reservoirs. The resulting analysis found 1,663 ring-dam to dry-gully systems in the contiguous United States that are lower cost than any overlapping dry-gully to dry-gully systems, 29 in Alaska, and none in Hawaii or Puerto Rico. These systems constitute 1.5 TW of capacity in the contiguous United States and nearly 29 GW in Alaska, demonstrating that under suitable topography and head, ring-dam systems can provide cost-effective PSH opportunities. The greatest density of these opportunities are found in the intermountain west where there are mesas and flat land at bases of mountain ranges, but continued work could incorporate additional site characteristics or consider more complex reservoir shapes to find additional PSH deployment opportunities.

13 HYDRO ENERGY↗

Properties of the Closest Young Binaries. I. DF Tau’s Unequal Circumstellar Disk Evolution

We present high-resolution, spatially resolved, near-infrared spectroscopy and imaging of the two components of DF Tau, a young, low-mass, visual binary in the Taurus star-forming region. With these data, we provide a more precise orbital solution for the system, determine component spectral types, radial velocity, veiling and vsin i values, and construct individual spectral energy distributions. We estimate the masses of both stars to be ∼0.6 M{sub ⊙}. We find markedly different circumstellar properties for DF Tau A and B: evidence for a disk, such as near-infrared excess and accretion signatures, is clearly present for the primary, while it is absent for the secondary. Additionally, the vsin i and rotation period measurements show that the secondary is rotating significantly more rapidly than the primary. We interpret these results in the framework of disk-locking and argue that DF Tau A is an example of disk-modulated rotation in a young system. The DF Tau system raises fundamental questions about our assumptions of universal disk formation and evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical computation of transonic flows by finite-element and finite-difference methods

Studies on applications of the finite element approach to transonic flow calculations are reported. Different discretization techniques of the differential equations and boundary conditions are compared. Finite element analogs of Murman's mixed type finite difference operators for small disturbance formulations were constructed and the time dependent approach (using finite differences in time and finite elements in space) was examined.

Hafez, M. M.↗

Vortex creep and the internal temperature of neutron stars Timing noise in pulsars

Vortex creep theory is used to construct model noise power spectra for three physically distinct types of events which might give rise to pulsar timing noise. These are 'pure' events, in which vortex unpinning is the source of the initial frequency jump; 'mixed' events, in which the initial frequency jump is produced by some physical process other than vortex unpinning but leads to the unpinning of some vortices; and 'external' events, in which the initial frequency jumps responsible for noise do not involve any vortex unpinning. For the first two types of events, it is found that relaxation processes in the region responsible for the noise will give rise to structure in the observed power spectra, while for external events, the resulting noise spectra will not be influenced by vortex creep. The theoretical results are compared with observed power spectra for 25 pulsars. The absence of structure in the observed power spectra of the Crab and Vela pulsars within the range of time scales which characterize their postglitch behavior indicates that the pinning regions which play a role in postglitch behavior do not experience the small unpinning events leading to timing noise.

Alpar, M. Ali↗

Generic task problem solvers in Soar

Two trends can be discerned in research in problem solving architectures in the last few years. On one hand, interest in task-specific architectures has grown, wherein types of problems of general utility are identified, and special architectures that support the development of problem solving systems for those types of problems are proposed. These architectures help in the acquisition and specification of knowledge by providing inference methods that are appropriate for the type of problem. However, knowledge based systems which use only one type of problem solving method are very brittle, and adding more types of methods requires a principled approach to integrating them in a flexible way. Contrasting with this trend is the proposal for a flexible, general architecture contained in the work on Soar. Soar has features which make it attractive for flexible use of all potentially relevant knowledge or methods. But as the theory Soar does not make commitments to specific types of problem solvers or provide guidance for their construction. It was investigated how task-specific architectures can be constructed in Soar to retain as many of the advantages as possible of both approaches. Examples were used from the Generic Task approach for building knowledge based systems. Though this approach was developed and applied for a number of problems, the ideas are applicable to other task-specific approaches as well.

Johnson, Todd R.↗

Hydrogen slush production with a large auger

The design and construction of a 178-mm-diameter auger-type hydrogen slush generator are described. A supercritical helium flow loop, which simulates the performance of a helium refrigerator, cools the generator. The coolant temperature varies down to 5 K and the flow varies about the 1.4 L/s (3 cfm) design point. The computer model of the auger-type generator shows that coolant temperature and auger speed have the greatest influence on slush production rate, although coolant flow rate and auger radial clearance are also important.

Daney, D. E.↗

Electromagnetically driven relativistic jets - A class of self-consistent numerical solutions

We explore the generalized Grad-Shafranov (GS) equation (Lovelace et al. 1986), which describes the cross-field balance of the magnetic flux surfaces in a stationary, axisymmetric, cold relativistic MHD wind. We construct a family of self-consistent, jet-type, non-self-similar solutions in which flux surfaces thread the equatorial plane vertically and are eventually collimated into nested cylinders. These solutions conserve the total energy and angular momentum along each flux surface and satisfy the relativistic GS equation in the cross-field direction. We find that the total specific energy in the flow depends primarily on a dimensionless combination of the poloidal magnetic flux, the rotation, and the mass loading rate, which reduces to Michel's (1969) magnetization parameter for radial winds. The final width of the flow and its ratio of kinetic energy flux to Poynting flux depend sensitively on the pressure distribution of the ambient medium, which is required to contain the jet at its outer edge when no jet-confirming external toroidal magnetic field is present. Furthermore, we show that the magnetic pressure in the flow can be much higher near the axis than close to the edge, reflecting the 'pinching' effect of the toroidal magnetic field.

Li, Zhi-Yun↗