Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “connected lighting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Time-multiplexed, optically-addressed, gigabit optical crossbar switch

A time-multiplexed, optically-addressed, crossbar switch (38) is provided using a two-dimensional, optically-addressed, reflective spatial light modulator (O-SLM) (20). Since the optical addressing is time-multiplexed, only N addressing lines are required for an N.times.N crossbar, rather than the N.sup.2 lines needed in the prior art. This reduction in addressing lines makes possible the development of enormous crossbar switches, such as 100.times.100, for the first time. In addition, since data paths remain entirely in the optics domain, data speeds can reach the multi-gigabit level. In the switch, a row (40) of N inputs (42) at the read wavelength is spread over one axis of the O-SLM. The light is refocused along the other axis to an output array (48) of detectors (50), so that each input has the potential to talk to any one output. The O-SLM is normally off, i.e., non-reflective, so that the output is, in the absence of an input signal, zero. A one-dimensional array (52) of lasers (54) at the write wavelength is imaged onto the O-SLM. Each laser scans across an entire row of the O-SLM; where the laser is on, it turns on a portion of the O-SLM and establishes a connection between a particular input and a particular output. A full row is scanned in a time much shorter than the response time of the O-SLM, so that state of the O-SLM is capacitively stored and dynamically refreshed. The scanning is accomplished by tuning the wavelength of the laser and passing it through a grating, which sweeps the beam in space.

Lang, Robert J.↗
NASA NTRS2016

Source Regions of the Type II Radio Burst Observed During a CME-CME Interaction on 2013 May 22

We report on our study of radio source regions during the type II radio burst on 2013 May 22 based on direction finding analysis of the Wind/WAVES and STEREO/WAVES (SWAVES) radio observations at decameter-hectometric wavelengths. The type II emission showed an enhancement that coincided with the interaction of two coronal mass ejections (CMEs) launched in sequence along closely spaced trajectories. The triangulation of the SWAVES source directions posited the ecliptic projections of the radio sources near the line connecting the Sun and the STEREO-A spacecraft. The WAVES and SWAVES source directions revealed shifts in the latitude of the radio source, indicating that the spatial location of the dominant source of the type II emission varies during the CME-CME interaction. The WAVES source directions close to 1MHz frequencies matched the location of the leading edge of the primary CME seen in the images of the LASCO/C3 coronagraph. This correspondence of spatial locations at both wavelengths confirms that the CME-CME interaction region is the source of the type II enhancement. Comparison of radio and white-light observations also showed that at lower frequencies scattering significantly affects radio wave propagation.

Makela, P.↗
NASA NTRSDate not supplied

Designing the Imaging and Breadboard System for FBCE-TL Project

This presentation outlines the support work done on designing the imaging and breadboard system of the Transfer Line (TL) project, which is the third module for the Flow Boiling and Condensation Experiment (FBCE) operating in the Fluids Integrated Rack on-board the International Space Station (ISS). The goal of the FBCE is to serve as a facility for flow boiling and condensation investigating two-phase flow and heat transfer data in microgravity. The TL module aims use existing FBCE hardware to study cryogenic chilldown, a large component of cryogenic propellant tank transfer research. The TL test module will perform chilldown studies with normal-perfluorohexane (nPFH), a cryogenic simulant, flowing through a super-heated line, which is heated through the process of Joule-heating. SolidWorks and Creo were used to create electrically conductive pipe junctions that connect and seal several Indium Tin Oxide (ITO) coated sapphire tube sections together to allow for low leak probability fluid flow and circumferentially uniform electrical current density. It is necessary to understand and calculate the thermal expansion of the tubing sections such that the junctions would not leak at anticipated operating temperatures and pressures, would maintain electrical contact, and not crack the crystalline tubes. Optical imaging techniques were used to build an experimentally validated image remapping process for flight-like setups of cylindrical tubes. Then MATLAB was used to create an algorithm that distorts an image based on the refraction of light passing through the mediums we were imaging through to accurately visualize the cryogenic chilldown that is of scientific interest. This research will assist NASA to move forward with long-duration spaceflight missions where knowledge of efficient heat transfer processes becomes more critical.

imaging system↗
DOE OSTI2026

Audi e-tron Green Light Optimized Speed Advisory On-Road Data

To aid researchers in studying the capabilities and benefits of vehicle-to-infrastructure communication, Argonne National Laboratory collected a robust set of on-road driving data of the Audi Green Light Optimized Speed Advisory (GLOSA) system implemented in the e-tron battery electric vehicle. This dataset includes 33 tests, each roughly 27 miles in length and roughly 45 to 75 minutes in duration. The team selected Kane County Highway Route 34 from Main Street in Batavia, Illinois to Middlecreek Lane in St. Charles, Illinois as the route do to its high density of GLOSA-active lights and the most opportunities to observe the system per hour of test time. The data include parameters from the following sources: GLOSA system driving the dash indicators, multiple powertrain parameters including real-time battery power/energy consumption, GPS, front radar gap, and rear radar gap. ![audio-e-tron image](audi-e-tron.jpg)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1983

Detection of flare like events and their relationship to presumed spot regions on V471 Tau - A solar-stellar connection

Since its discovery as an eclipsing binary with a white dwarf companion by Nelson and Young (1970), V471 Tau (BD + 16 deg 516) has been an object of considerable importance. The K dwarf companion has been the subject of intensive studies because it demonstrates many of the properties normally attributed to classical RS CVn stars. In the present investigation, it is demonstrated that the K dwarf companion exhibits also flaring properties which characterize the BY Dra stars. In a sense, V471 Tau may be the critical link by providing information that the distinctions between RS CVn phenomena and BY Dra phenomena are artificial and misleading, arising entirely from historical processes. Observations in the optical and the X-ray wavelength regions are reported. A study of the occurrence times of flare events in terms of the ephemeris of the photometric wave which is known to migrate through the light curve of V471 Tau reveals a strong correlation, suggesting that the flares occur near regions of the K dwarf where spot groups are inferred.

Klimke, A.↗
DOE OSTI2023

A giant umbrella-like stellar stream around the tidal ring galaxy NGC 922

Tidal ring galaxies (TRGs) are rarely observed in the local universe due to their intrinsically transient nature. The tidal ring structures are the result of strong interactions between gas-rich stellar disks and smaller galactic systems, and do not last longer than ~500 Myr. Therefore, these are perfect scenarios in which to look for the debris of recently accreted dwarf galactic systems. Our goal is to study the low surface brightness stellar structures around the TRG NGC 922 and to revise the hypothesis of its formation in light of these new data. We present new deep images of the TRG NGC 922 and its surroundings from the DESI Legacy survey data and from our observations with an amateur telescope. These observations are compared with results from high-resolution N-body simulations that were designed to reproduce an alternative formation scenario for this peculiar galaxy. Our new observations unveil that the low surface brightness stellar tidal structures around NGC 922 are much more complex than reported in previous works. In particular, the formerly detected tidal spike-like structure at the north-east of the central galaxy disk is not connected with the dwarf companion galaxy PGC 3080368, which has been suggested as the intruder triggering the ring formation of NGC 922. The deep images reveal that this tidal structure mainly has a fainter giant umbrella-like shape, and thus it was formed from the tidal disruption of a different satellite. Using the broad-band g, r, and z DESI LS images, we measured the photometric properties of this stellar stream, estimating a total absolute magnitude in the r band of M r = -17.0 ± 0.03 mag and a total stellar mass for the stream of between 6.9 and 8.5×10 8 M ⊙ . We performed a set of N-body simulations to reproduce the observed NGC922-intruder interaction, suggesting a new scenario for the formation of its tidal ring from the infall of a gas-rich satellite around 150 Myr ago. Finally, our deep images also reveal a tidal shell around the dwarf galaxy PGC 3080368, a possible fossil of a recent merger with a smaller satellite, which may suggest it is in its first infall towards NGC 922.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Extremely large magnetoresistance in high-mobility SrNbO 3 /SrTiO 3 heterostructures

In this report an extremely large linear magnetoresistance (LMR) is a ubiquitous phenomenon emerging from topological Dirac and Weyl semimetals. However, the connection between an LMR and a nontrivial topology is under extensive debate. In this paper, by precisely controlling the thickness of SrNbO 3 thin films grown on SrTiO 3 substrates, we observe an LMR over a large carrier density range with a magnetoresistance as high as 150000% at a carrier density n~10 21 cm -3 , far away from the quantum-limit regime. The temperature-, magnetic-field-, and carrier-density-dependent LMR in SrNbO 3 /SrTiO 3 heterostructures provides compelling evidence of a mobility-driven LMR in coherent electronic systems. Our results uncover the general principle of an LMR and shed light on proper categorization of transport properties in topological and correlated materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1995

On the deficit problem of mass and energy of solar coronal mass ejections connected with interplanetary shocks

Mean values of a number of parameters of the most powerful coronal mass ejections (CMEs) and interplanetary shocks generated by these ejections are estimated using an analysis of data obtained by the cosmic coronagraphs and spacecrafts, and geomagnetic storm measurements. It was payed attention that the shock mass and mechanical energy, averaging 5 x 10(exp 16) grm and 2 x 10(exp 32) erg respectively, are nearly 10 times larger than corresponding parameters of the ejections. So, the CME energy deficit problem seems to exist really. To solve this problem one can make an assumption that the process of the mass and energy growth of CMEs during their propagation out of the Sun observed in the solar corona is continued in supercorona too up to distances of 10-30 solar radii. This assumption is confirmed by the data analysis of five events observed using zodiacal light photometers of the HELIOS- I and HELIOS-2 spacecrafts. The mass growth rate is estimated to be equal to (1-7) x 10(exp 11) grm/sec. It is concluded that the CME contribution to mass and energy flows in the solar winds probably, is larger enough than the value of 3-5% adopted usually.

Ivanchuk, V. I.↗
NASA NTRS1982

Spaceborne lidar measurement accuracy - Simulation of aerosol, cloud, molecular density, and temperature retrievals

In connection with studies concerning the use of an orbiting optical radar (lidar) to conduct aerosol and cloud measurements, attention has been given to the accuracy with which lidar return signals could be measured. However, signal-measurement error is not the only source of error which can affect the accuracy of the derived information. Other error sources are the assumed molecular-density and atmospheric-transmission profiles, and the lidar calibration factor (which relates signal to backscatter coefficient). The present investigation has the objective to account for the effects of all these errors sources for several realistic combinations of lidar parameters, model atmospheres, and background lighting conditions. In addition, a procedure is tested and developed for measuring density and temperature profiles with the lidar, and for using the lidar-derived density profiles to improve aerosol retrievals.

Russell, P. B.↗
NASA NTRS2002

Design and Fabrication of Two-Dimensional Semiconducting Bolometer Arrays for the High Resolution Airborne Wideband Camera (HAWC) and the Submillimeter High Angular Resolution Camera II (SHARC-II)

The High resolution Airborne Wideband Camera (HAWC) and the Submillimeter High Angular Resolution Camera II (SHARC 11) will use almost identical versions of an ion-implanted silicon bolometer array developed at the National Aeronautics and Space Administration's Goddard Space Flight Center (GSFC). The GSFC "Pop-Up" Detectors (PUD's) use a unique folding technique to enable a 12 x 32-element close-packed array of bolometers with a filling factor greater than 95 percent. A kinematic Kevlar(Registered Trademark) suspension system isolates the 200 mK bolometers from the helium bath temperature, and GSFC - developed silicon bridge chips make electrical connection to the bolometers, while maintaining thermal isolation. The JFET preamps operate at 120 K. Providing good thermal heat sinking for these, and keeping their conduction and radiation from reaching the nearby bolometers, is one of the principal design challenges encountered. Another interesting challenge is the preparation of the silicon bolometers. They are manufactured in 32-element, planar rows using Micro Electro Mechanical Systems (MEMS) semiconductor etching techniques, and then cut and folded onto a ceramic bar. Optical alignment using specialized jigs ensures their uniformity and correct placement. The rows are then stacked to create the 12 x 32-element array. Engineering results from the first light run of SHARC II at the CalTech Submillimeter Observatory (CSO) are presented.

Voellmer, George M.↗
NASA NTRS2002

Design and Fabrication of Two-Dimensional Semiconducting Bolometer Arrays for the High Resolution Airborne Wideband Camera (HAWC) and the Submillimeter High Angular Resolution Camera II (SHARC-II)

The High resolution Airborne Wideband Camera (HAWC) and the Submillimeter High Angular Resolution Camera II (SHARC II) will use almost identical versions of an ion-implanted silicon bolometer array developed at the National Aeronautics and Space Administration's Goddard Space Flight Center (GSFC). The GSFC 'Pop-up' Detectors (PUD's) use a unique folding technique to enable a 12 x 32-element close-packed array of bolometers with a filling factor greater than 95 percent. A kinematic Kevlar(trademark) suspension system isolates the 200 mK bolometers from the helium bath temperature, and GSFC - developed silicon bridge chips make electrical connection to the bolometers, while maintaining thermal isolation. The JFET preamps operate at 120 K. Providing good thermal heat sinking for these, and keeping their conduction and radiation from reaching the nearby bolometers, is one of the principal design challenges encountered. Another interesting challenge is the preparation of the silicon bolometers. They are manufactured in 32-element, planar rows using Micro Electro Mechanical Systems (MEMS) semiconductor etching techniques, and then cut and folded onto a ceramic bar. Optical alignment using specialized jigs ensures their uniformity and correct placement. The rows are then stacked to create the 12 x 32-element array. Engineering results from the first light run of SHARC II at the Caltech Submillimeter Observatory (CSO) are presented.

Voellmer, George M.↗
DOE OSTI2022

Green diatom mutants reveal an intricate biosynthetic pathway of fucoxanthin

Fucoxanthin is a major light-harvesting pigment in ecologically important algae such as diatoms, haptophytes, and brown algae (Phaeophyceae). Therefore, it is a major driver of global primary productivity. Species of these algal groups are brown colored because the high amounts of fucoxanthin bound to the proteins of their photosynthetic machineries enable efficient absorption of green light. While the structure of these fucoxanthin-chlorophyll proteins has recently been resolved, the biosynthetic pathway of fucoxanthin is still unknown. Here, we identified two enzymes central to this pathway by generating corresponding knockout mutants of the diatom Phaeodactylum tricornutum that are green due to the lack of fucoxanthin. Complementation of the mutants with the native genes or orthologs from haptophytes restored fucoxanthin biosynthesis. We propose a complete biosynthetic path to fucoxanthin in diatoms and haptophytes based on the carotenoid intermediates identified in the mutants and in vitro biochemical assays. It is substantially more complex than anticipated and reveals diadinoxanthin metabolism as the central regulatory hub connecting the photoprotective xanthophyll cycle and the formation of fucoxanthin. Moreover, our data show that the pathway evolved by repeated duplication and neofunctionalization of genes for the xanthophyll cycle enzymes violaxanthin de-epoxidase and zeaxanthin epoxidase. Brown algae lack diadinoxanthin and the genes described here and instead use an alternative pathway predicted to involve fewer enzymes. Our work represents a major step forward in elucidating the biosynthesis of fucoxanthin and understanding the evolution, biogenesis, and regulation of the photosynthetic machinery in algae.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Light-powered end-to-end neutron detection and imaging with an edge-deployed optical AI chip

Neutron detection is widely used in many applications including nuclear physics, nuclear energy, nuclear technologies and nuclear safeguards. Developing an end-to-end neutron detection and imaging workflow paves way towards fully automated processes for many applications. We implemented an automated workflow for neutron detection experiments which use a solid state image sensor to capture neutron hits as a digital image. We deploy the workflow to an edge-based optical neural network (ONN) to increase the radiation-hardness and lifetime of neutron detection instruments. We present a two-stage neural network framework for detection of neutrons at sub-pixel resolution. The first stage uses a region proposal network to efficiently detect and extract neutron hits from the input camera image. The second stage feeds the extracted hits into a fully connected neural network to predict the sub-pixel hit position. The performance of the two-stage framework is evaluated using the edge-based ONN. The results show that we can achieve above 96% neutron detection accuracy as well as sub-pixel and sub-micron position resolution, while enjoying the advantages of the ONN hardware including radiation-hardness, low energy consumption and high computing speed for integrated edge camera and hardware deployment, when compared with electronic counterparts.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

A stable and highly selective metalloporphyrin based framework for the catalytic oxidation of cyclohexene

A new metalloporphyrin framework of molybdenum Mo 2 O 4 (C 48 H 28 N 4 O 8 )·(CH 3 ) 2 NH·5H 2 O·2DMF (Mo 2 TCPP) was synthesized from tetrakis(4-carboxyphenyl)porphyrin (H 4 TCPP) and sodium molybdate dihydrate by a hydrothermal method. Mo 2 TCPP is a 3D network with two sub-units, in which both TCPP ligands and each Mo 2 dimer act as four connection nodes. The crystal structure was determined by single crystal analysis and further characterized by FTIR, SEM, EDX, PXRD, XPS and TGA. Here cumene hydrogen peroxide and hydrogen peroxide were used as oxidants to study the catalytic activity of new metalloporphyrins in the oxidation of cyclohexene at different temperatures. The conversion rate of cyclohexene and the selectivity of epoxycyclohexane were both higher than 99%, which was better than the previously published research results. The stability of the catalyst before and after the reaction was further tested for 10 runs without obvious degradation. The catalyst was stable in different solutions such as acidic, water and alkaline. These results shed light on the future development of new catalytic materials based on metalloporphyrin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Nonparametric Method for the Inference of Halo Occupation Distributions

The galaxy–halo connection traces processes by which galaxies form and evolve. The halo occupation distribution (HOD) describes the relationship between galaxies and their host dark matter haloes. Measurements of the galaxy two-point correlation function (2PCF) allow us to extract information about the HODs of observed galaxy samples. Several parametric HOD models have been proposed in the literature, but the choice of parameterization restricts the space of possible HODs. To resolve this issue, we introduce a nonparametric HOD fitting method in which we train an emulator to learn the mappings among the galaxy 2PCF, physical properties used to select galaxy samples, and the HOD, all obtained from simulated past light cones constructed with the Santa Cruz semianalytic model. Implementing this emulator within a likelihood analysis framework, we derive constraints on the HOD of a galaxy sample when provided with a measurement of its 2PCF. Using the emulator to accelerate likelihood evaluations, we test the nonparametric HOD approach on a set of 2PCFs for mock galaxy samples drawn from the TNG100-1 simulation and selected above threshold values of stellar mass and star formation rate. Our framework is able to recover TNG100-1 HODs within 0.2 dex. We use the TNG100-1 mocks to tune the reported uncertainties to estimate those expected in the analysis of observations. Comparing to parametric HOD modelling routines applied to the same mock galaxy samples, our approach consistently infers the HOD with comparable or greater precision and accuracy.

Kennedy, Jacob [Rutgers Univ., Piscataway, NJ (Uni↗
DOE OSTI2024

Determining Key Factors for the Open-Loop Control of Molecular Fragmentation Using Shaped Strong Fields

Pulse shaping has long been employed for tailoring femtosecond laser pulses to study and control the fragmentation of polyatomic molecules. In many cases, a physical explanation connecting the properties of the field to the observed control is difficult to ascertain. We utilized 80 bit binary spectral phase functions to parametrize and map the search space, gaining insight into which pulse parameters most impact the ion yield and fragmentation pattern for the relatively large triethylamine [N(C 2 H 5 ) 3 ] molecule. Pulse structures used to control the m/z 86 branching ratio beyond a simple intensity dependence are identified and compared to pump–probe results. All of these findings are explained in terms of control via a dissociative Rydberg state in the neutral molecule. This methodology may be used to discover new control mechanisms and shed light onto which pulse parameters most influence the interaction between strong field lasers and matter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Movement with meaning: integrating information into meta-ecology

Fluxes of matter, energy and information over space and time contribute to ecosystems' functioning and stability. The meta-ecosystem framework addresses the dynamics of ecosystems linked by these fluxes but, to date, has focused solely on energy and matter. Here, we synthesize existing knowledge of information's effects on local and connected ecosystems and demonstrate how new hypotheses emerge from the integration of ecological information into meta-ecosystem theory. First, we begin by defining information and reviewing how it flows among ecosystems to affect connectivity, local ecosystem function and meta-ecosystem dynamics. We focus on the role of semiotic information: that which can reduce an individual's – or a group's – uncertainty about the state of the world. Semiotic information elicits behavioral, developmental and life history responses from organisms, potentially leading to fitness consequences. Organisms' responses to information can ripple through trophic interactions to influence ecosystem processes, their local and regional dynamics, and the spatiotemporal flows of energy and matter, therefore information should affect meta-ecosystem dynamics such as stability and productivity. While specific subdisciplines of ecology currently consider different types of information (e.g. social and cultural information, natural and artificial light or sound, body condition, genotype and phenotype), many ecological models currently account for neither the spatio–temporal distribution of information nor its perception by organisms. We identify the empirical, theoretical and philosophical challenges in developing a robust information meta-ecology and offer ways to overcome them. Finally, we present new hypotheses for how accounting for realistic information perception and responses by organisms could impact processes such as home range formation and spatial insurance, and thus our understanding of ecological dynamics across spatial and temporal scales. Accounting for information will be essential to understanding how dynamics such as fitness, organismal movement and trophic interactions influence meta-ecosystem functioning, and predicting how ecosystem processes are affected by anthropogenic pressures.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

Wireless Temperature-Monitoring System

A relatively inexpensive instrumentation system that includes units that are connected to thermocouples and that are parts of a radio-communication network has been developed to enable monitoring of temperatures at multiple locations. Because there is no need to string wires or cables for communication, the system is well suited for monitoring temperatures at remote locations and for applications in which frequent changes of monitored or monitoring locations are needed. The system can also be adapted to monitoring of slowly varying physical quantities, other than temperature, that can be transduced by solid-state electronic sensors. electronic sensors. The system comprises any number of transmitting units and a single receiving unit. Each transmitting unit includes connections for as many as four external thermocouples, a signal-conditioning module, a control module, and a radio-communication module. The signal-conditioning module acts as an interface between the thermocouples and the rest of the transmitting unit and includes a built-in solid ambient temperature sensor that is in addition to the external thermocouples. The control module is a system-on-chip embedded processor that includes analog-to-digital converters, serial and parallel data ports, and an interface for local connection to an analog meter that is used during installation to verify correct operation. The radio-communication module contains a commercial spread-spectrum transceiver that operates in the 900-MHz industrial, scientific, and medical (ISM) frequency band. This transceiver transmits data to the receiving unit at a rate of 19,200 baud. The receiving unit includes a transceiver like that of a transmitting unit, plus a control module that contains a system-on-chip processor that includes serial data port for output to a computer that runs monitoring and/or control software, a parallel data port for output to a printer, and a seven-segment light-emitting-diode display. Each transmitting unit is battery-powered and can operate for at least seven days continuously while reporting temperatures every half hour. The receiving unit is powered by a wall-mounted transformer source. The receiving unit responds to each transmitting unit and reports the readings of each of the four thermocouples and of the ambient-temperature sensor of the transmitting unit. The end-to-end accuracy of the system is plus or minus 0.2 C over the temperature range from 0 to 100 C. The radio-communication range between the receiving and transmitting units is approximately equal to 0.5 mile (approximately equal to 0.8 km).

Solano, Wanda↗