Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “backing layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

In situ Oxidation of Ultrathin Silver Films on Ni(111)

Oxidation of silver films of one- and two-monolayer thicknesses on the Ni(111) surface was investigated by low-energy electron microscopy at temperatures of 500 and 600 K. Additionally, intensity-voltage curves were measured in situ during oxidation to reveal the local film structure on a nanometer scale. At both temperatures, we find that exposure to molecular oxygen leads to the destabilization of the Ag film with subsequent relocation of the silver atoms to small few-layer-thick silver patches and concurrent evolution of NiO(111) regions. Subsequent exposure of the oxidized surface to ethylene initiates the transformation of bilayer islands back into monolayer islands, demonstrating at least partial reversibility of the silver relocation process at 600 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High throughput CIGS solar cell fabrication via ultra-thin absorber layer with optical confinement and (Cd, CBD)-free heterojunction partner

The main objective of this proposal was to use several pathways to reduce the production cost of Cu(In,Ga)Se 2 (CIGS) PV modules and therefore the levelized cost of energy (LCOE) associated with this technology. Three high cost drivers were identified, nominally: 1) Materials cost and availability; 2) Large scale uniformity; 3) Improved throughput These three cost drivers were targeted using the following pathways: 1) Reducing the thickness of the CIGS layer while enhancing materials quality; 2) Developing and applying enhanced in-situ metrology via real time spectroscopic ellipsometry; 3) Looking into alternative heterojunction partner, back contact and anti-reflection (AR) coating Eleven main Tasks were then defined to achieve these goals (5 in Phase 1 and 6 in Phase 2), with 11 Milestones and 2 Go/No-go decision points at the end of Phase 1. The key results are summarized below

14 SOLAR ENERGY↗

Wind River Experimental Forest Subcanopy Tower Information Sheet

Wind River was one of three sites that collected 3d sonic anemometer data for an ICOS subcanopy observation study. The three sites were defined by the following features and terrain: a deciduous broadleaf forest in flat terrain (Lanžhot, Czech Republic), a coniferous forest in mountainous terrain (Renon, Italy), and a tall conifer forest in mountain-valley terrain (Wind River, USA). The Wind River subcanopy towers were deployed in a high LAI, old-growth evergreen conifer forest and collected approximately 11 months of data. The site is an ecologically rich temperate rainforest in the western Cascade Mountains, and the biological carbon sink and source strength has been measured since 1998 using eddy covariance on the top of a 74 m tall flux tower (currently called the Wind River NEON tower). Additionally, forest inventory records date back to the 1920s. In 2024, four subcanopy towers were installed near the Wind River NEON tower to measure wind flow in the understory canopy layer for better understanding canopy flow coupling and decoupling in the subcanopy and how this affects the interpretation of overstory fluxes. The subcanopy tower installation was done by Lawrence Livermore National Laboratory and Washington State University (WSU) with collaborations from the University of Utah and the National Ecological Observatory Network (NEON).

54 ENVIRONMENTAL SCIENCES↗

Peeled film GaAs solar cells for space power

Gallium arsenide (GaAs) peeled film solar cells were fabricated, by Organo-Metallic Vapor Phase Epitaxy (OMVPE), incorporating an aluminum arsenide (AlAs) parting layer between the device structure and the GaAs substrate. This layer was selectively removed by etching in dilute hydrofloric (HF) acid to release the epitaxial film. Test devices exhibit high series resistance due to insufficient back contact area. A new design is presented which uses a coverglass superstrate for structural support and incorporates a coplanar back contact design. Devices based on this design should have a specific power approaching 700 W/Kg.

Wilt, D. M.↗

Weathering processes implied from analysis of small Martian avalanche chutes

It has been proposed that the smaller features of martian spur and gully slope morphology, located along the upper walls of Valles Marineris, are avalanche chutes. A three-dimensional stability back-analysis technique was developed and applied to these small avalanche chutes, yielding average values of cohesion and angle of internal friction for the mobile layer materials on these slopes at the time of each slope failure. Generally, the analysis showed that at the time of each slope failure material strengths had been reduced to those of moderately cohesive debris down through depths of tens of meters. These results have implications and possible constraints for the nature and rate of martian weathering processes.

Sullivan, R.↗

Material Measurements Using Groundplane Apertures

A technique for material parameter determination using an aperture in a groundplane is studied. The material parameters are found by relating the measured reflected field in the aperture to a numerical model. Two apertures are studied which can have a variety of different material configurations covering the aperture. The aperture cross-sections studied are rectangular and coaxial. The material configurations involved combinations of single layer and dual layers with or without a resistive exterior resistive sheet. The resistivity of the resistive sheet can be specified to simulate a perfect electric conductor (PEC) backing (0 Ohms/square) to a free space backing (infinity Ohms/square). Numerical parameter studies and measurements were performed to assess the feasibility of the technique.

Komisarek, K.↗

Effect of Convection on the Tropical Tropopause Layer over the Tropical Americas

Water vapor and ozone are the most important gases that regulate the radiative balance of the Tropical Tropopause Layer (TTL). Their radiative contribution dictates the height within the TTL and the rate at which air either ascends into the tropical stratosphere or subsides back to the tropical troposphere. The details of the mechanisms that control their concentration, however, are poorly understood. One of such mechanisms is convection that reaches into the TTL. ill this study, we will present evidence from space-borne observations of the impact that convection has on water vapor, ozone, and temperature in the TTL over the Tropical Americas where deep and overshooting convection have the highest frequency of occurrence in the tropics. We explore the effect of convective systems such as hurricanes during the 2005 season using the Microwave Limb Sounder (MLS) on Aura version 1.5 data and more recent tropical systems using the newly released version 2 data with higher vertical resolution. ill order to provide the horizontal extent and the vertical structure of the convective systems, we use data from the Moderate Resolution Imaging Spectroradiometer (MODIS) on Aqua, the Microwave Humidity Sensor (MHS) on NOAA~18, and CloudSat when available.

Pittman, Jasna↗

Regenerable non-venting cooler for protective suit

A life support back pack 14 for use during extravehicular activity in space incorporates a cooling apparatus 20 comprised of five panels 22 each of which include in layered fashion a LCG coolant heat exchange coil 32, a heat distribution plate 42, and a heat dissipation module 50A or 50B having an outer radiator surface 52. Each module 50A houses a first phase change material 55A, for example hexadecane paraffin, and each module 50B houses a second phase change material 55B, for example tetradecane paraffin, which has a phase change temperature which is less than the phase change temperature of the first phase change material 55A. The cooling apparatus 20 is equipped with a coolant heat exchange circuit provided with mode selection valves 84 and 86 which are operated by a controller 88 to selectively direct the LCG coolant to be cooled through the cooling apparatus in one of three operating modes.

Roebelen, Jr., George J.↗

2012 Ground Testing Highlights

As part of the Fundamental Aeronautics Program and a collaborative effort with Boeing, and Lockheed Martin this past year a series of sonic boom test were completed in the NASA Ames Unitary Plan Wind Tunnel (UPWT). One of the goals was to develop new test techniques and hardware for measuring sonic boom signatures in the transonic and supersonic regimes. Data for various model designs and configurations were collected and will be used to validate CFD predictions of sonic boom signatures. Reactivation of the NASA Ames Mitsubishi compressor system was completed this past year. The compressor is intended to replace and augment the existing UPWT Clark Compressor as the primary Make Up Air (MUA) source. The MUA system provides air and vacuum pumping capability to the Ames UPWT. It will improve productivity and reliability of the UPWT as a vital testing and research facility for the U.S. aerospace industry and NASA. Funding for this task was provided from the American Recovery Investment Act (ARRA). Installation and validation of a Noncontact Stress Monitoring System (NSMS) for the 3-stage compressor was completed at the 11-foot Transonic Wind Tunnel. The system, originally developed at AEDC, consists of 36 pairs of LED light sources with optic beam send and receive probes along a 1-per rev signal. The new system allows for continuous monitoring and recording of compressor blade bending and torsion stress during normal test operations. A very unusual test was completed in the 11 FT TWT to acquire aerodynamic and flow field data for the Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS) to validate CFD methods and tools. Surface pressure distribution measurements and velocity measurements in the wake of the command module back to the drogues parachute location were acquired. Testing methods included Particle Image Velocimetry (PIV), Pressure Sensitive Paint (PSP), Schlieren Infrared Imaging (IR) and boundary layer survey and skin friction.

Buchholz, Steven J.↗

Multi-frequency Tomography Radar Observations of Snow Stratigraphy at Fraser during SnowEx

SnowEx is a multi-year airborne snow campaign led by NASA. The purpose of SnowEx is to figure out how much water is stored in Earth’s terrestrial snow-covered regions. As part of the 2017 NASA SnowEx campaign, we deployed a portable triple-frequency (9.6GHz, 13.5GHz and 17.2GHz) and fully polarimetric frequency-modulated continuous-wave (FMCW) radar at Fraser, Colorado. The radar was installed on a 60cmx60cm frame to enable a full reconstruction of the three-dimensional variability per each radar channel. The tomography technique uses the radar echo from the multiple viewing positions and provides a unique access to the vertical structure of the snow layer. With current setup, the range resolution is 30cm. In this paper, we will review the radar design and signal-processing algorithm – time domain back projection. The generated vertical images show the snow stratigraphy, which is consistent with ground snow pit measurement. The continuous operation demonstrates diurnal thawing and refreezing process. The snow density is retrieved by comparing to the snow free image.

Esteban-Fernandez, Daniel↗

Satellite characterization of global stratospheric sulfate aerosols released by Tonga volcano

Large volcanic eruptions create an enhanced layer of sulfate aerosols in the stratosphere. These sulfuric acid droplets persist for many months, altering the climate and stratospheric chemistry. Sulfate aerosols scatter sunlight back to space, cooling the surface of the Earth and absorb outgoing thermal radiation, heating the stratosphere. The calculation of the climate impact of sulfate aerosols depends on their physical properties such as droplet size and chemical composition. These properties are not well known, and this uncertainty contributes to the errors in climate model predictions. Here we derive the first empirical formula that predicts the composition of stratospheric sulfate aerosols from volcanic eruptions from the air temperature and water vapor pressure. Measurements of atmospheric infrared transmittance of the Hunga Tonga-Hunga Ha'apai sulfate aerosol plume by the Atmospheric Chemistry Experiment (ACE) satellite were analyzed to determine composition (weight percent of sulfuric acid) and median particle radius. These data are supplemented by measurements of the Raikoke and Nabro eruptions. Our analysis allows the properties of volcanic aerosols in the stratosphere to be predicted reliably in atmospheric models.

P Bernath↗

Passivated Tunneling Contacts to N-Type Wafer Silicon and Their Implementation into High Performance Solar Cells: Preprint

We present a case that passivated contacts based on a thin tunneling oxide layer, combined with a transport layer with properly selected work function and band offsets, can lead to high efficiency c-Si solar cells. Passivated contacts contribute to cell efficiency as well as design flexibility, process robustness, and a simplified process flow. Material choices for the transport layer are examined, including transparent n-type oxides and n+-doped poly-Si. SiO2/n+-poly-Si full-area, induced-junction back surface field contacts to n-FZ and n-Cz Si are incorporated into high efficiency cells with deep, passivated boron emitters.

14 SOLAR ENERGY↗

Decoupling Thin Film CdTe Growth from Packaging: Toward Record Specific Power in Low Cost Polycrystalline PV: Preprint

There are critical material and scientific barriers to producing high efficiency, flexible, lightweight solar cells that maximize specific power in a cost-effective manner. GaAs solar cells produce the highest specific power of any photovoltaic (PV) technology due to their low weight and extremely high efficiency, but they are also among the most expensive to produce. This work explores a novel lift-off approach with thin-film solar cells, particularly CdTe, to achieve high specific power at low costs. Thin-film devices can be delaminated from their heavy, glass growth substrates post-growth by exploiting a mismatch in coefficient of thermal expansion between the two. This allows thin-film PV to be decoupled from high temperature growth requirements and repackaged using lightweight materials. Currently, the most consistent method of achieving complete delamination of CdTe films is to apply a glass handle at the back contact of the device using epoxy and submerge it in liquid nitrogen. By Tthen re-depositing a transparent front contact but be re-deposited and selectively etcheding to expose the back contact to produce, a functioning lifted-off devices have been produced. Effects of delamination and contributions to device functionality from CdCl2 and CdS layers are discussed. Reproducible delamination of high efficiency, thin-film solar cells over large areas will enable work to further improve device efficiency through passivation and reconstruction of the previously buried interface between the transparent contact and CdS.

14 SOLAR ENERGY↗

Charge trapping of Ge-nanocrystals embedded in TaZrO{sub x} dielectric films

Ge-nanocrystals (NCs) were synthesized in amorphous TaZrO{sub x} by thermal annealing of co-sputtered Ge-TaZrO{sub x} layers. Formation of spherical shaped Ge-NCs with small variation of size, areal density, and depth distribution was confirmed by high-resolution transmission electron microscopy. The charge storage characteristics of the Ge-NCs were investigated by capacitance-voltage and constant-capacity measurements using metal-insulator-semiconductor structures. Samples with Ge-NCs exhibit a maximum memory window of 5 V by sweeping the bias voltage from −7 V to 7 V and back. Below this maximum, the width of the memory window can be controlled by the bias voltage. The fitted slope of the memory window versus bias voltage characteristics is very close to 1 for samples with one layer Ge-NCs. A second layer Ge-NCs does not result in a second flat stair in the memory window characteristics. Constant-capacity measurements indicate charge storage in trapping centers at the interfaces between the Ge-NCs and the surrounding materials (amorphous matrix/tunneling oxide). Charge loss occurs by thermal detrapping and subsequent band-to-band tunneling. Reference samples without Ge-NCs do not show any memory window.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase-constant-nonreciprocal composite right/left-handed metamaterials based on coplanar waveguides

The purely phase-constant-nonreciprocal composite right-left handed metamaterial structure is proposed based on coplanar waveguides loaded with a ferrite layer. The structure exhibits considerably large nonreciprocity in phase constant which depends on the effective magnetization and whose magnitude can remain in leaky wave region of wavenumbers or can overcome a boundary to slow wave region. The nonreciprocity in amplitude of transmission coefficients, on the other hand, is effectively reduced by using a cavity-backed design to prevent undesired nonreciprocal radiation loss.

36 MATERIALS SCIENCE↗

Planarized arrays of aligned, untangled multiwall carbon nanotubes with Ohmic back contacts

Vertically aligned, untangled planarized arrays of multiwall carbon nanotubes (MWNTs) with Ohmic back contacts were grown in nanopore templates on arbitrary substrates. The templates were prepared by sputter depositing Nd-doped Al films onto W-coated substrates, followed by anodization to form an aluminum oxide nanopore array. The W underlayer helps eliminate the aluminum oxide barrier that typically occurs at the nanopore bottoms by instead forming a thin WO 3 layer. The WO 3 can be selectively etched to enable electrodeposition of Co catalysts with control over the Co site density. This led to control of the site density of MWNTs grown by thermal chemical vapor deposition, with the W also serving as a back electrical contact. As a result, Ohmic contact to MWNTs was confirmed, even following ultrasonic cutting of the entire array to a uniform height.

36 MATERIALS SCIENCE↗

Computational Prediction of Infrasound Arrival Times and Directions from Stationary and Moving Impulsive Sources

This report addresses the need to predict infrasound signal arrival times and back azimuths at monitoring stations, enabling more focused and efficient searches within recorded waveform data. The primary challenge is estimating expected signal arrival windows for stationary and moving acoustic sources, such as chemical explosions, volcanic eruptions, meteoroids, and spacecraft re-entry events. To address this challenge, a reproducible methodology is described that uses simplified propagation speeds for boundary layer, tropospheric, stratospheric, and thermospheric atmospheric waveguides. While the Python source code itself is not freely available, this document provides detailed, step-by-step instructions, and equations enabling users to replicate and adapt the method independently. The method reliably predicts signal arrival intervals and back azimuths, thereby supporting rapid detection and accurate interpretation of infrasound events. Results demonstrate that this method effectively identifies plausible signal arrival intervals and directions, facilitating faster event detection and more reliable interpretation. This methodology directly supports atmospheric monitoring, planetary defense, and forensic analysis of explosive atmospheric events.

47 OTHER INSTRUMENTATION↗