Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “alternative fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Investigation of Ruthenium Dissolution in Advanced Membrane Electrode Assemblies for Direct Methanol Based Fuel Cell Stacks

Dissolution of ruthenium was observed in the 80-cell stack. Duration testing was performed in single cell MEAs to determine the pathway of cell degradation. EDAX analysis on each of the single cell MEAs has shown that the Johnson Matthey commercial catalyst is stable in DMFC operation for 250 hours, no ruthenium dissolution was observed. Changes in the hydrophobicity of the cathode backing papers was minimum. Electrode polarization analysis revealed that the MEA performance loss is attributed to changes in the cathode catalyst layer. Ruthenium migration does not seem to occur during cell operation but can occur when methanol is absent from the anode compartment, the cathode compartment has access to air, and the cells in the stack are electrically connected to a load (Shunt Currents). The open-to-air cathode stack design allowed for: a) The MEAs to have continual access to oxygen; and b) The stack to sustain shunt currents. Ruthenium dissolution in a DMFC stack can be prevented by: a) Developing an internally manifolded stacks that seal reactant compartments when not in operation; b) Bringing the cell voltages to zero quickly when not in operation; and c) Limiting the total number of cells to 25 in an effort to limit shunt currents.

alternative power sources↗
NASA NTRS2009

Biofuels as an Alternative Energy Source for Aviation-A Survey

The use of biofuels has been gaining in popularity over the past few years because of their ability to reduce the dependence on fossil fuels. As a renewable energy source, biofuels can be a viable option for sustaining long-term energy needs if they are managed efficiently. We investigate past, present, and possible future biofuel alternatives currently being researched and applied around the world. More specifically, we investigate the use of ethanol, cellulosic ethanol, biodiesel (palm oil, algae, and halophytes), and synthetic fuel blends that can potentially be used as fuels for aviation and nonaerospace applications. We also investigate the processing of biomass via gasification, hydrolysis, and anaerobic digestion as a way to extract fuel oil from alternative biofuels sources.

McDowellBomani, Bilal M.↗
DOE OSTI2025

Mechanistic nuclear fuel performance modeling of uranium nitride

Uranium mononitride (UN) is a nuclear fuel candidate for advanced reactor designs and an alternative being considered for light water reactors due to its higher thermal conductivity and uranium density than UO 2 . As with any nuclear fuel, swelling and fission gas release are important factors for safety, while also being some of the hardest phenomena to predict with a high degree of confidence. Getting a grasp on the gas swelling behavior and release is crucial to lower the barrier for UN utilization. An accelerated swelling rate at high temperatures observed experimentally, sometimes referred to as “breakaway swelling,” further complicates the prediction of fuel performance of UN. A mechanistic model has been developed using a multiscale approach to describe the intragranular and intergranular fission gas behavior. Lower-length-scale calculations have been employed to inform models of the gas and self-diffusion behavior, resolution rate, and bubble shape. Leveraging previous work on high burnup UO 2 , two populations of intragranular bubbles are considered; small bulk bubbles and larger bubbles located along dislocations. The dislocation bubbles were found to be crucial to the overall swelling behavior, and the breakaway swelling transition was associated with the transition in the gas atom diffusion mechanism from an irradiation-induced athermal diffusion regime at lower temperatures to an intrinsic thermal equilibrium regime at higher temperatures, accelerating the growth of the dislocation bubbles. Similarly, the threshold for fission gas release was associated with the grain boundary vacancy diffusivity surpassing the gas atom diffusivity at sufficiently high temperatures, allowing the over-pressurized grain boundary bubble to grow in size and interconnect. Using thermo-mechanical models with the fission gas model, two integral fuel pin assessment cases were simulated. Finally, this work demonstrates the ability of a multiscale approach to accelerate the understanding of advanced fuel forms when experimental data is limited.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Sensors for measuring thermal conductivity and related methods

A sensor for measuring thermal conductivity includes an insulator, a test material over the insulator, a conductor over the test material, and a gas within an open volume adjacent the test material and the conductor. An electrical source is configured to provide an alternating current through the conductor to heat the test material. Leads are connected to the conductor and configured to connect to a voltmeter. A method of measuring thermal conductivity includes disposing the sensor in a reactor core in which a nuclear fuel undergoes irradiation and radioactive decay. An alternating current is provided from the electrical source through the conductor to heat the test material. A voltage is measured as a function of time at the leads connected to the conductor. A thermal conductivity of the test material is calculated based on the voltage measured as a function of time. Methods of forming a sensor are also disclosed.

Daw, Joshua↗
DOE OSTI2021

Variations in cell wall traits impact saccharification potential of Salix famelica and Salix eriocephala

Increasing global populations, finite arable land, and the anthropogenic release of carbon dioxide into the atmosphere are driving the search for bio-based alternatives to the petroleum-derived fuels and chemicals that underpin the global economy. With rapid growth rates, a propensity for coppicing, and a wide geographic range across Canada, native shrub willows (Salix spp.) are an attractive source of low-input, high-volume biomass. To date, most willow research has focused on increasing yields and improving cropping systems, while comparatively little work has been done to assess the intrinsic diversity in cell wall traits and bioenergy potential. In this study, we characterized the cell wall composition and wood ultrastructure of 338 xylem samples from two Canadian willow species, Salix famelica and Salix eriocephala, harvested from a common garden experimental plot. Lignin content ranged from 17.5–25.1% in S. famelica and 18.6–24.3% in S. eriocephala. Following alkali pretreatment with 62.5 mM NaOH at 90 °C for 3 h and a 70-h enzymatic digestion with Accellerase 1000, glucose release ranged from 23.0–38.9 wt% in S. famelica and from 20.5–37.7 wt% in S. eriocephala, while xylose release ranged from 9.4–14.9% in S. famelica and from 9.5–15.2% in S. eriocephala. Here, partial least squares regression modelling showed that lignin content and composition were important negative regulators of glucose release. Overall, this work highlights the innate variability in cell wall traits of native willows and identifies potential genotypes that should be considered in future breeding and deployment strategies for Canadian bioenergy production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Multimodal analysis and characterization of the boehmite layer formed on AA6061 before and after alkaline etching

Low-enriched uranium (LEU) alloyed with 10% Mo (U-10Mo) is being considered as a promising alternative to oxide-based dispersion fuel with high-enriched uranium for use in research reactors. The configuration of this proposed LEU monolithic LEU fuel plate consists of a U-10Mo plate-type fuel foil with a 25 µm zirconium interlayer barrier clad with an aluminum alloy (AA6061). In certain research reactors, the clad AA6061 is coated with a boehmite layer to prevent corrosion. The boehmite layer has a high-pH passivation range, which makes it resistant to oxidation. Boehmite is usually formed on the AA6061 surface by autoclave processing. Before the boehmite layer is added, the surface of the AA6061 is cleaned using techniques such as polishing and wet etching. In this study, we use multimodal analysis to examine how pretreatment of AA6061 using polishing followed by alkaline etching affects the chemical composition of the boehmite layer. X-ray photoelectron microscopy (XPS), transmission electron microscopy (TEM), and x-ray diffraction (XRD) were used to study the chemical changes in the boehmite layer caused by alkaline etching pretreatment. XPS provides quantitative analysis for the Al:O ratio as well as oxidation states present on the surface, which suggests slight oxidation of the boehmite surface after alkaline etching of the AA6061 surface. We further explored this suggested oxidation of the boehmite surface using high-resolution transmission electron microscopy with selected area electron diffraction (SAED) and grazing incidence x-ray diffraction (GI-XRD), which suggested only a small amount of aluminum oxide at the surface. The multimodal analysis and imaging yielded new insights for optimizing boehmite growth on AA6061 for research reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of heavy-duty vehicle representative driving cycles via decision tree regression

Previously, researchers who developed representative driving cycles mainly focused on light-duty vehicles and only considered vehicle speed and related derivations. In this paper, we propose a novel approach to develop representative cycles for heavy-duty vehicles. By implementing decision tree regression (DTR) to the Fleet DNA on-road vehicle data, a broader set of metrics, such as engine power and fuel consumption, can be used for more robust cycle development. Additionally, the influence of each metric on the regression target is also accounted for by a weighted number derived through the DTR to enhance the representativenss of the developed cycle. As case studies, we applied the proposed method to five heavy-duty vocations (drayage, long haul, regional haul, local delivery, and transit bus) and derived the most representative cycle, as well as four extreme cycles (maximal energy consumption, maximal power-weighted work, maximal fraction of high speed, and minimal fuel economy) to advance the related alternative powertrain design.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Ternary PtIrNi Catalysts for Efficient Electrochemical Ammonia Oxidation

Due to high energy density, carbon-free feature, and easiness to be liquefied, ammonia (NH 3 ) has proved to be an effective alternative to hydrogen in low temperature fuel cells via its direct the ammonia oxidation reaction (AOR) for electricity generation. However, the kinetically sluggish AOR has prohibitively hindered the attractive direct ammonia fuel cell (DAFC) applications. Here we report an efficient AOR catalyst, in which ternary PtIrNi alloy nanoparticles well dispersed on a binary composite support consisting of porous silicon dioxide (SiO 2 ) and carboxyl-functionalized carbon nanotube (PtIrNi/SiO 2 -CNT-COOH) through a sonochemical-assisted synthesis strategy. The PtIrNi alloy nanoparticles, with the aid of abundant OHad provided by porous SiO 2 , and the improved electrical conductivity by CNTs, exhibit remarkable catalytic activity for the AOR in alkaline media. It is evidenced by a lower onset potential (~0.40 V vs. RHE) at room temperature, than that of commercial PtIr/C (ca. 0.43 V vs. RHE). Increasing NH 3 concentrations and operation temperatures significantly improve AOR performance of this catalyst. Specifically, AOR activity of the optimal PtIrNi nanoparticle catalyst can be significantly enhanced by elevating the temperature to 80ºC, with a much lower onset potential (~0.32 V vs. RHE), indicating that DAFC can be operated at higher temperature for increased performance. Constant-potential density functional theory (DFT) calculations showed that the Pt-Ir ensembles on {100}-terminated surfaces serve as the active site. Importantly, the introduction of Ni raises the center energy of the density of states projected onto the group d-orbitals of surface sites and thus lowers the theoretical onset potential for *NH 2 dehydrogenation to *NH when compared to Pt and Pt 3 Ir alloy.

25 ENERGY STORAGE↗
DOE OSTI2021

Double-Site Substitution of Ce into (Ba, Sr)MnO 3 Perovskites for Solar Thermochemical Hydrogen Production

Solar thermochemical hydrogen production (STCH) is a renewable alternative to hydrogen production using fossil fuels. While serial bulk experimental methods can accurately measure STCH performance, screening chemically complex materials systems for new promising candidates is more challenging. Here we identify double-site Ce-substituted (Ba,Sr)MnO 3 oxide perovskites as promising STCH candidates using a combination of bulk synthesis and high-throughput thin-film experiments. The Ce substitution on the B-site in 10H-BaMnO 3 and on the A-site in -SrMnO 3 leads to 2–3 times higher hydrogen production compared to CeO 2 , but these bulk single-site substituted perovskites suffer from incomplete reoxidation. Double-site Ce substitution on both A- and B-sites in (Ba,Sr)MnO 3 thin films increases Ce solubility and extends the stability of 10H and 3C structures, which is promising for their thermochemical reversibility. This study demonstrates a high-throughput experimental method for screening complex oxide materials for STCH applications.

08 HYDROGEN↗
DOE OSTI2021

Microbial production of advanced biofuels

Concerns over climate change have necessitated a rethinking of our transportation infrastructure. One possible alternative to carbon-polluting fossil fuels is biofuels produced by engineered microorganisms that use a renewable carbon source. Two biofuels, ethanol and biodiesel, have made inroads in displacing petroleum-based fuels, but their uptake has been limited by the amounts that can be used in conventional engines and by their cost. Further, advanced biofuels that mimic petroleum-based fuels are not limited by the amounts that can be used in existing transportation infrastructure but have had limited uptake due to costs. In this Review, we discuss engineering metabolic pathways to produce advanced biofuels, challenges with substrate and product toxicity with regard to host microorganisms and methods to engineer tolerance, and the use of functional genomics and machine learning approaches to produce advanced biofuels and prospects for reducing their costs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Biomimetic Catalysts Based on Au@ZnO–Graphene Composites for the Generation of Hydrogen by Water Splitting

For some decades, the scientific community has been looking for alternatives to the use of fossil fuels that allow for the planet’s sustainable and environmentally-friendly development. To do this, attempts have been made to mimic some processes that occur in nature, among which the photosystem-II stands out, which allows water splitting operating with different steps to generate oxygen and hydrogen. This research presents promising results using synthetic catalysts, which try to simulate some natural processes, and which are based on Au@ZnO–graphene compounds. These catalysts were prepared by incorporating different amounts of gold nanoparticles (1 wt.%, 3 wt.%, 5 wt.%, 10 wt.%) and graphene (1 wt.%) on the surface of synthesized zinc oxide nanowires (ZnO NWs), and zinc oxide nanoparticles (ZnO NPs), along with a commercial form (commercial ZnO) for comparison purposes. The highest amount of hydrogen (1127 μmol/hg) was reported by ZnO NWs with a gold and graphene loadings of 10 wt.% and 1 wt.%, respectively, under irradiation at 400 nm. Quantities of 759 μmol/hg and 709 μmol/hg were obtained with catalysts based on ZnO NPs and commercial ZnO, respectively. The photocatalytic activity of all composites increased with respect to the bare semiconductors, being 2.5 times higher in ZnO NWs, 8.8 times higher for ZnO NPs, and 7.5 times higher for commercial ZnO. The high photocatalytic activity of the catalysts is attributed, mainly, to the synergism between the different amount of gold and graphene incorporated, and the surface area of the composites.

Machín, Abniel (ORCID:0000000341343344)↗
NASA NTRS1977

Design and calculated performance and cost of the ECAS Phase II open cycle MHD power generation system

A 2000 MWe MHD/steam plant for central station applications has been designed and costed as part of the Energy Conversion Alternatives Study (ECAS). This plant is fueled by Illinois No. 6 coal, rejects heat through mechanical draft wet cooling towers, and includes coal processing equipment, seed reprocessing, electrical inversion of the MHD generator output and emission controls to current EPA standards. It yields an estimated overall efficiency of 0.483 (7066 Btu/kWe-hr), a capital cost of $718 per kWe (1975 dollars), and a cost of electricity at 65% capacity factor of 32 mills per kWe-hr. If the assumed life and reliability could be achieved with these performance parameters, the MHD system should prove attractive.

Harris, L. P.↗
NASA NTRS1983

Parametric study of flame radiation characteristics of a tubular-can combustor

A series of combustor tests were conducted with a tubular-can combustor to study flame radiation characteristics and effects with parametric variations in combustor operating conditions. Two alternate combustor assemblies using a different fuel nozzle were compared. Spectral and total radiation detectors were positioned at three stations along the length of the combustor can. Data were obtained for a range of pressures from 0.34 to 2.07 MPa (50 to 300 psia), inlet temperatures from 533 to 700K (500 to 800 F), for Jet A (13.9 deg hydrogen) and ERBS (12.9% hydrogen) fuels, and with fuel-air ratios nominally from 0.008 to 0.021. Spectral radiation data, total radiant heat flux data, and liner temperature data are presented to illustrate the flame radiation characteristics and effects in the primary, secondary, and tertiary combustion zones.

Humenik, F. M.↗
NASA NTRS1990

Numerical analysis of secondary flow in a two-stage turbine

The three-dimensional viscous average passage flow in the Pratt and Whitney alternate design Space Shuttle Main Engine fuel turbine has been simulated. The effect of secondary flows generated by upstream blade rows on the performance of downstream blade rows is studied. The numerical results are compared to the design intent to validate improved models in the average passage equations. Analysis of the results centers on the primary spanwise mixing mechanism in this low aspect ratio turbine. A multigrid method has also been incorporated to improve the overall convergence rate of the numerical algorithm.

Kirtley, K. R.↗
NASA NTRS1991

Seal-rotordynamic-coefficient test results for a model SSME ATD-HPFTP turbine interstate seal with and without a swirl brake

The predictions of Scharrer's (1988) theory for rotordynamic coefficients of labyrinth gas seals were compared with measurements for a model SSME Alternate Turbopump Development High-Pressure Fuel Turbopump with and without swirl brakes. Using the test apparatus described by Childs et al. (1986, 1990), tests were conducted with supply pressures up to 18.3 bars and speeds up to 16,000 rpm. Seal back pressure was controlled to provide four pressure ratios at all supply pressures. No measurable difference in leakage was detected for the seal with and without the swirl brakes. Comparisons of the measurement results for the seal without a swirl brake with the Scharrer theory showed that the theory can be used only to provide design guidelines; systematic differences were observed between theory and experiment due to changes in running speed, supply pressure, and pressure ratio.

Childs, D. W.↗
NASA NTRS1993

The effect of unsteadiness on the time-mean thermal loads in a turbine stage

Two steady numerical analysis methods and one unsteady method are used to study the viscous three-dimensional flow in the middle stage of the Pratt & Whitney alternate design Space Shuttle Main Engine fuel turbine. The principal characteristic of this flow is that the secondary flows generated in the rotor blade reconfigure a radial inlet total temperature distortion into one with a pitchwise exit hot streak distortion. Secondary flows in the following vane redistribute the radial variation while unsteadiness causes a segregation of hot and cold flow from the hot streak within the vane. Such redistribution and segregation can lead to unexpected thermal loads and reduced durability. The physical phenomena and the ability of a steady analysis to capture them are investigated by performing a numerical experiment whereby the results of the two steady analysis methods are compared to the time-mean of the unsteady simulation. The flow physics related to the segregation and mixing of total temperature are discussed.

Kirtley, K. R.↗
NASA NTRS2002

Numerical Propulsion System Simulation (NPSS): An Award Winning Propulsion System Simulation Tool

The Numerical Propulsion System Simulation (NPSS) is a full propulsion system simulation tool used by aerospace engineers to predict and analyze the aerothermodynamic behavior of commercial jet aircraft, military applications, and space transportation. The NPSS framework was developed to support aerospace, but other applications are already leveraging the initial capabilities, such as aviation safety, ground-based power, and alternative energy conversion devices such as fuel cells. By using the framework and developing the necessary components, future applications that NPSS could support include nuclear power, water treatment, biomedicine, chemical processing, and marine propulsion. NPSS will dramatically reduce the time, effort, and expense necessary to design and test jet engines. It accomplishes that by generating sophisticated computer simulations of an aerospace object or system, thus enabling engineers to "test" various design options without having to conduct costly, time-consuming real-life tests. The ultimate goal of NPSS is to create a numerical "test cell" that enables engineers to create complete engine simulations overnight on cost-effective computing platforms. Using NPSS, engine designers will be able to analyze different parts of the engine simultaneously, perform different types of analysis simultaneously (e.g., aerodynamic and structural), and perform analysis in a more efficient and less costly manner. NPSS will cut the development time of a new engine in half, from 10 years to 5 years. And NPSS will have a similar effect on the cost of development: new jet engines will cost about a billion dollars to develop rather than two billion. NPSS is also being applied to the development of space transportation technologies, and it is expected that similar efficiencies and cost savings will result. Advancements of NPSS in fiscal year 2001 included enhancing the NPSS Developer's Kit to easily integrate external components of varying fidelities, providing the initial Visual-Based Syntax (VBS) capability, and developing additional capabilities to support space transportation. NPSS was supported under NASA's High Performance Computing and Communications Program. Through the NASA/Industry Cooperative Effort agreement, NASA Glenn and its industry and Government partners are developing NPSS. The NPSS team consists of propulsion experts and software engineers from GE Aircraft Engines, Pratt & Whitney, The Boeing Company, Honeywell, Rolls-Royce Corporation, Williams International, Teledyne Continental Motors, Arnold Engineering Development Center, Wright Patterson Air Force Base, and the NASA Glenn Research Center. Glenn is leading the way in developing NPSS--a method for solving complex design problems that's faster, better, and cheaper.

Stauber, Laurel J.↗
NASA NTRS2005

Investigation of Ruthenium Dissolution in Advanced Membrane Electrode Assemblies for Direct Methanol Based Fuel Cells Stacks

This viewgraph presentation gives a detailed review of the Direct Methanol Based Fuel Cell (DMFC) stack and investigates the Ruthenium that was found at the exit of the stack. The topics include: 1) Motivation; 2) Pathways for Cell Degradation; 3) Cell Duration Testing; 4) Duration Testing, MEA Analysis; and 5) Stack Degradation Analysis.

Direct Methanol Fuel Cells, (DMFC)↗