Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Variational methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Thickness-Independent Ultrasonic Imaging Applied to Abrasive Cut-Off Wheels: An Advanced Aerospace Materials Characterization Method for the Abrasives Industry. A NASA Lewis Research Center Technology Transfer Case History

Abrasive cut-off wheels are at times unintentionally manufactured with nonuniformity that is difficult to identify and sufficiently characterize without time-consuming, destructive examination. One particular nonuniformity is a density variation condition occurring around the wheel circumference or along the radius, or both. This density variation, depending on its severity, can cause wheel warpage and wheel vibration resulting in unacceptable performance and perhaps premature failure of the wheel. Conventional nondestructive evaluation methods such as ultrasonic c-scan imaging and film radiography are inaccurate in their attempts at characterizing the density variation because a superimposing thickness variation exists as well in the wheel. In this article, the single transducer thickness-independent ultrasonic imaging method, developed specifically to allow more accurate characterization of aerospace components, is shown to precisely characterize the extent of the density variation in a cut-off wheel having a superimposing thickness variation. The method thereby has potential as an effective quality control tool in the abrasives industry for the wheel manufacturer.

Roth, Don J.↗
NASA NTRSDate not supplied

Quantum-Compatible Variational Segmentation for Image-to-Image Wildfire Detection Using Satellite Data

Wildfire occurrences have been increasing for the past decade, leaving devastating traces across the world. In the recent efforts, remote sensing and airborne missions have been utilized to better understand and manage wildfires. This has resulted in an exponential increase in volume of remote sensing data, which has pushed the need for intelligent automation of data extraction for wildfire studies. Machine learning offers accurate automation in detecting such natural anomalies and enable decision-makers to take actions in a timely manner. Recent advances in machine learning algorithms, namely probabilistic generative methods, allow researchers and decisionmakers to step beyond detection and study “what-if” scenarios for wildfire occurrences. Additionally, they offer better imitations to the stochastic behavior of nature, and wildfire events. However, optimizing the performance of these probabilistic generative models is a computationally expensive process, specially using digital computers. On the other hand, quantum computers have recently shown a promise to reduce computationally costly training of such models and provide performance improvements. There is a body of research investigating the potential for improved machine learning methods in which key operations are performed on a quantum computer. In this study, we propose a probabilistic image-toimage segmentation approach combining a very well-known segmentation method, U-NET, with a Conditional Variational Auto-Encoder (CVAE) to not only detect wildfires but also describe the stochasticity of the phenomenon and be capable of running “what-if” scenarios. Our proposed model is compatible with training on quantum computers, which results in a quantum-assisted image-to-image segmentation approach and can be used to benchmark the potential benefit of quantum computing over the classical one.

quantum↗
NASA NTRS2013

Assessment of Ice Shape Roughness Using a Self-Orgainizing Map Approach

Self-organizing maps are neural-network techniques for representing noisy, multidimensional data aligned along a lower-dimensional and nonlinear manifold. For a large set of noisy data, each element of a finite set of codebook vectors is iteratively moved in the direction of the data closest to the winner codebook vector. Through successive iterations, the codebook vectors begin to align with the trends of the higher-dimensional data. Prior investigations of ice shapes have focused on using self-organizing maps to characterize mean ice forms. The Icing Research Branch has recently acquired a high resolution three dimensional scanner system capable of resolving ice shape surface roughness. A method is presented for the evaluation of surface roughness variations using high-resolution surface scans based on a self-organizing map representation of the mean ice shape. The new method is demonstrated for 1) an 18-in. NACA 23012 airfoil 2 AOA just after the initial ice coverage of the leading 5 of the suction surface of the airfoil, 2) a 21-in. NACA 0012 at 0AOA following coverage of the leading 10 of the airfoil surface, and 3) a cold-soaked 21-in.NACA 0012 airfoil without ice. The SOM method resulted in descriptions of the statistical coverage limits and a quantitative representation of early stages of ice roughness formation on the airfoils. Limitations of the SOM method are explored, and the uncertainty limits of the method are investigated using the non-iced NACA 0012 airfoil measurements.

Icing↗
NASA NTRS1991

A new finite element formulation for computational fluid dynamics. X - The compressible Euler and Navier-Stokes equations

A space-time element method is presented for solving the compressible Euler and Navier-Stokes equations. The proposed formulation includes the variational equation, predictor multi-corrector algorithms and boundary conditions. The variational equation is based on the time-discontinuous Galerkin method, in which the physical entropy variables are employed. A least-squares operator and a discontinuity-capturing operator are added, resulting in a high-order accurate and unconditionally stable method. Implicit/explicit predictor multi-corrector algorithms, applicable to steady as well as unsteady problems, are presented; techniques are developed to enhance their efficiency. Implementation of boundary conditions is addressed; in particular, a technique is introduced to satisfy nonlinear essential boundary conditions, and a consistent method is presented to calculate boundary fluxes. Numerical results are presented to demonstrate the performance of the method.

Shakib, Farzin↗
NASA NTRS2010

Interlaminar Stresses by Refined Beam Theories and the Sinc Method Based on Interpolation of Highest Derivative

Computation of interlaminar stresses from the higher-order shear and normal deformable beam theory and the refined zigzag theory was performed using the Sinc method based on Interpolation of Highest Derivative. The Sinc method based on Interpolation of Highest Derivative was proposed as an efficient method for determining through-the-thickness variations of interlaminar stresses from one- and two-dimensional analysis by integration of the equilibrium equations of three-dimensional elasticity. However, the use of traditional equivalent single layer theories often results in inaccuracies near the boundaries and when the lamina have extremely large differences in material properties. Interlaminar stresses in symmetric cross-ply laminated beams were obtained by solving the higher-order shear and normal deformable beam theory and the refined zigzag theory with the Sinc method based on Interpolation of Highest Derivative. Interlaminar stresses and bending stresses from the present approach were compared with a detailed finite element solution obtained by ABAQUS/Standard. The results illustrate the ease with which the Sinc method based on Interpolation of Highest Derivative can be used to obtain the through-the-thickness distributions of interlaminar stresses from the beam theories. Moreover, the results indicate that the refined zigzag theory is a substantial improvement over the Timoshenko beam theory due to the piecewise continuous displacement field which more accurately represents interlaminar discontinuities in the strain field. The higher-order shear and normal deformable beam theory more accurately captures the interlaminar stresses at the ends of the beam because it allows transverse normal strain. However, the continuous nature of the displacement field requires a large number of monomial terms before the interlaminar stresses are computed as accurately as the refined zigzag theory.

Slemp, Wesley C. H.↗
NASA NTRSDate not supplied

Predictions of the Azimuthal Variation of the Noise from Chevron Jets using an Acoustic Analogy

An existing acoustic analogy formulation is used to make predictions of the turbulent mixing noise from a series of chevron jets tested at NASA Glenn Research Center. Reynolds-averaged Navier-Stokes solutions are used as input to provide the mean flow and turbulence quantities needed to compute the Green’s function and parameterize the source model. The Green’s function for the non-axisymmetric mean flows generated by these nozzles is computed using a second-order finite volume method. A slightly modified version of an existing source model originally developed for round jets is used to assess its capability in these non-axisymmetric flows. Prediction results are compared with experimental data for a range of azimuthal orders of the nozzle geometry and flow speeds. The results show that the RANS-based acoustic analogy prediction method is able to capture the observed azimuthal variation of the sound field fairly well at relatively low jet exit velocities. At higher speeds, the prediction method still captures the observed trends in azimuthal directivity but not the absolute levels, particularly at higher frequencies. Areas for potential improvement of the method are suggested.

Jet Noise↗
NASA NTRSDate not supplied

Predictions of the Azimuthal Variation of the Noise from Chevron Jets using an Acoustic Analogy

An existing acoustic analogy formulation is used to make predictions of the turbulent mixing noise from a series of chevron jets tested at NASA Glenn Research Center. Reynolds-averaged Navier-Stokes solutions are used as input to provide the mean flow and turbulence quantities needed to compute the Green’s function and parameterize the source model. The Green’s function for the non-axisymmetric mean flows generated by these nozzles is computed using a second-order finite volume method. A slightly modified version of an existing source model originally developed for round jets is used to assess its capability in these non-axisymmetric flows. Prediction results are compared with experimental data for a range of azimuthal orders of the nozzle geometry and flow speeds. The results show that the RANS-based acoustic analogy prediction method is able to capture the observed azimuthal variation of the sound field fairly well at relatively low jet exit velocities. At higher speeds, the prediction method still captures the observed trends in azimuthal directivity but not the absolute levels, particularly at higher frequencies. Areas for potential improvement of the method are suggested.

Jet Noise↗
NASA NTRS1993

A global/local analysis method for treating details in structural design

A method for analyzing global/local behavior of plate and shell structures is described. In this approach, a detailed finite element model of the local region is incorporated within a coarser global finite element model. The local model need not be nodally compatible (i.e., need not have a one-to-one nodal correspondence) with the global model at their common boundary; therefore, the two models may be constructed independently. The nodal incompatibility of the models is accounted for by introducing appropriate constraint conditions into the potential energy in a hybrid variational formulation. The primary advantage of this method is that the need for transition modeling between global and local models is eliminated. Eliminating transition modeling has two benefits. First, modeling efforts are reduced since tedious and complex transitioning need not be performed. Second, errors due to the mesh distortion, often unavoidable in mesh transitioning, are minimized by avoiding distorted elements beyond what is needed to represent the geometry of the component. The method is applied reduced to a plate loaded in tension and transverse bending. The plate has a central hole, and various hole sixes and shapes are studied. The method is also applied to a composite laminated fuselage panel with a crack emanating from a window in the panel. While this method is applied herein to global/local problems, it is also applicable to the coupled analysis of independently modeled components as well as adaptive refinement.

Aminpour, Mohammad A.↗
NASA NTRS2003

Monte Carlo Simulation of Sudden Death Bearing Testing

Monte Carlo simulations combined with sudden death testing were used to compare resultant bearing lives to the calculated hearing life and the cumulative test time and calendar time relative to sequential and censored sequential testing. A total of 30 960 virtual 50-mm bore deep-groove ball bearings were evaluated in 33 different sudden death test configurations comprising 36, 72, and 144 bearings each. Variations in both life and Weibull slope were a function of the number of bearings failed independent of the test method used and not the total number of bearings tested. Variation in L10 life as a function of number of bearings failed were similar to variations in lift obtained from sequentially failed real bearings and from Monte Carlo (virtual) testing of entire populations. Reductions up to 40 percent in bearing test time and calendar time can be achieved by testing to failure or the L(sub 50) life and terminating all testing when the last of the predetermined bearing failures has occurred. Sudden death testing is not a more efficient method to reduce bearing test time or calendar time when compared to censored sequential testing.

Vlcek, Brian L.↗
NASA NTRS2003

Measuring Diffusion of Liquids by Common-Path Interferometry

A method of observing the interdiffusion of a pair of miscible liquids is based on the use of a common-path interferometer (CPI) to measure the spatially varying gradient of the index refraction in the interfacial region in which the interdiffusion takes place. Assuming that the indices of refraction of the two liquids are different and that the gradient of the index of refraction of the liquid is proportional to the gradient in the relative concentrations of either liquid, the diffusivity of the pair of liquids can be calculated from the temporal variation of the spatial variation of the index of refraction. This method yields robust measurements and does not require precise knowledge of the indices of refraction of the pure liquids. Moreover, the CPI instrumentation is compact and is optomechanically robust by virtue of its common- path design. The two liquids are placed in a transparent rectangular parallelepiped test cell. Initially, the interface between the liquids is a horizontal plane, above which lies pure liquid 2 (the less-dense liquid) and below which lies pure liquid 1 (the denser liquid). The subsequent interdiffusion of the liquids gives rise to a gradient of concentration and a corresponding gradient of the index of refraction in a mixing layer. For the purpose of observing the interdiffusion, the test cell is placed in the test section of the CPI, in which a collimated, polarized beam of light from a low-power laser is projected horizontally through a region that contains the mixing layer.

Rashidnia, Nasser↗
NASA NTRS1991

An efficient method for estimating neighboring steady-state numerical solutions to the Euler equations

The paper concentrates on a linear approximation method for predicting the changes occurring in steady-state numerical solutions of the Euler equations as a consequence of small changes in the independent variables which control the problem. The importance of proper boundary-condition treatment and other issues concerning the problem are covered along with the importance of proper algorithm selection for a fully supersonic inviscid flow. The method is applied to a subsonic nozzle involving variation of the pressure on the outflow boundary and to a supersonic inlet involving variation of the inflow Mach number. In the subsonic test case, the comparisons between the predicted and conventional numerical solutions are shown to be good, while in the supersonic test case, the agreement between the approximation method and conventional numerical solution starts out well but rapidly degenerates at some point in the flowfield as the perturbation of the boundary conditions is increased.

Taylor, Arthur C., III↗
NASA NTRS1992

Digital time series analysis for flutter test data

An application of digital time series analysis to flutter test data processing was conducted. A numerical investigation was used to evaluate the method, as well as its sensitivity to noise and parameter variations. These parameters included those involved with data acquisition, as well as system response characteristics. This digital time series method was then used to predict flutter speed from subcritical response wind tunnel tests. Flutter speeds predicted from forced response, subcritical wind tunnel tests were compared to the experimental flutter speeds.

Batill, S. M.↗
NASA NTRS1975

Short-periodic variations and second-order numerical averaging

The principal disadvantage of the method of numerical averaging is that it provides only the average time history of the orbital elements and yields no information about the high-frequency or short-periodic variations that occur inside the averaging interval. This paper contains a description of a technique for recovering the short-periodic variations by minor modifications to the averaging process so as to permit the construction of a Fourier series for the osculating elements. The availability of this series permits the extension of the averaging technique to higher order and allows us to account for short-periodic coupling of the perturbations. Comparisons of the results with numerically integrated solutions are presented for three distinct orbit prediction problems.

Lutzky, D.↗
NASA NTRS1992

A probabilistic approach to the evaluation of fatigue damage in a space propulsion system injector element

The fatigue damage of a space propulsion system component is computed using probabilistic structural analysis methods. The analysis takes into account the variations in static and dynamic loads, the uncertainty in structural damping, and the scatter in material fatigue resistance. The key elements of the probabilistic approach include: (1) a numerical engine model for describing the global component interface loads consistent with engine balance, (2) models for computing the local mode boundary conditions on the component, (3) a static structural analysis model that captures the strains at a damage critical location as a function of engine performance variables, (4) a finite element model for assessment of the random amplitude stress response due to random base and pressure excitations with uncertain power and correlation length, and (5) advanced first order reliability methods for computing the probabilities associated with the fatigue damage.

Rajagopal, K. R.↗
NASA NTRS2001

Stress Formulation in Three-Dimensional Elasticity

The theory of elasticity evolved over centuries through the contributions of eminent scientists like Cauchy, Navier, Hooke Saint Venant, and others. It was deemed complete when Saint Venant provided the strain formulation in 1860. However, unlike Cauchy, who addressed equilibrium in the field and on the boundary, the strain formulation was confined only to the field. Saint Venant overlooked the compatibility on the boundary. Because of this deficiency, a direct stress formulation could not be developed. Stress with traditional methods must be recovered by backcalculation: differentiating either the displacement or the stress function. We have addressed the compatibility on the boundary. Augmentation of these conditions has completed the stress formulation in elasticity, opening up a way for a direct determination of stress without the intermediate step of calculating the displacement or the stress function. This Completed Beltrami-Michell Formulation (CBMF) can be specialized to derive the traditional methods, but the reverse is not possible. Elasticity solutions must be verified for the compliance of the new equation because the boundary compatibility conditions expressed in terms of displacement are not trivially satisfied. This paper presents the variational derivation of the stress formulation, illustrates the method, examines attributes and benefits, and outlines the future course of research.

Patnaik, Surya N.↗
NASA NTRS1991

A finite element model of conduction, convection, and phase change near a solid/melt interface

Detailed understanding of heat transfer and fluid flow is required for many aerospace thermal systems. These systems often include phase change and operate over a range of accelerations or effective gravitational fields. An approach to analyzing such systems is presented which requires the simultaneous solution of the conservation laws of energy, momentum, and mass, as well as an equation of state. The variable property form of the governing equations are developed in two-dimensional Cartesian coordinates for a Newtonian fluid. A numerical procedure for solving the governing equations is presented and implemented in a computer program. The Galerkin form of the finite element method is used to solve the spatial variation of the field variables, along with the implicit Crank-Nicolson time marching algorithm. Quadratic Langrangian elements are used for the internal energy and the two components of velocity. Linear Lagrangian elements are used for the pressure. The location of the solid/liquid interface as well as the temperatures are determined form the calculated internal energy and pressure. This approach is quite general in that it can describe heat transfer without phase change, phase change with a sharp interface, and phase change without an interface. Analytical results from this model are compared to those of other researchers studying transient conduction, convection, and phase change and are found to be in good agreement. The numerical procedure presented requires significant computer resources, but this is not unusual when compared to similar studies by other researchers. Several methods are suggested to reduce the computational times.

Viterna, Larry A.↗
NASA NTRS1982

Stability of compressible three-dimensional boundary-layer flows

For compressible three-dimensional flow, the method of multiple scales to formulate the three-dimensional stability problem and determine the partial-differential equations governing variations of the amplitude and complex wavenumbers is used. A method for following one specific wave along its trajectory to ascertain the characteristics of the most unstable disturbance is proposed. Numerical results using the flow over the X-21 wing as calculated from the Kaups-Cebeci code will be presented.

Reed, H. L.↗
NASA NTRS1991

Slope variations on the surface of Phobos

It has been suggested that slope fluctuations on the scale of pixel dimensions could be determined by statistical photoclinometry. A closer study of the surface of Phobos reveals variations in the scattering properties of single particles and microstructures formed by the particles. In the present context, the photoclinometric method of brightness moments is extended to account for these variations by allowing statistical fluctuations in the phase function of the assumed Lommel-Seeliger scattering law. The mean slope on the investigated regions of Phobos has been found to vary from about 12 deg on a 61 m scale to about 7 deg on a 216 - 272 m scale. On the same scales, a value of the order of 2 percent has been obtained for the standard deviation of the scattering phase function. Hints of a fractal-like scale-invariance have been noticed in the covariance function of brightness.

Muinonen, Karri↗