Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Phases of Theories with ℤ 𝑁 1-Form Symmetry, and the Roles of Center Vortices and Magnetic Monopoles

We analyze the phases of theories having a microscopic ℤ 𝑁 1-form symmetry, starting with a topological BF theory and deforming it so that only the microscopic symmetry is preserved. These theories have a well-defined notion of confinement, prototypical examples being pure SU⁡(𝑁) and ℤ 𝑁 gauge theories in the continuum and on the lattice. Our analysis shows that the generic phases are in 𝑑 = 2, only the confined phase; in 𝑑 = 3, both the confined phase and the topological BF phase; and in 𝑑 = 4, the confined phase, the topological BF phase, and a Coulomb phase. We construct a ℤ𝑁 lattice gauge theory with a deformation that, surprisingly, produces up to (𝑁−1) photons. We give an interpretation of these findings in terms of the behaviors of two competing drivers of confinement—magnetic monopoles and center vortices—and conclude that proliferation of center vortices is necessary but insufficient for confinement, while proliferation of magnetic monopoles is both necessary and sufficient.

Color confinement↗
DOE OSTI2020

III-V/Si Tandem Cells Utilizing Interdigitated Back Contact Si Cells and Varying Terminal Configurations

Integrating wide-bandgap III-V with Si solar cells has been shown to yield higher efficiencies than Si alone: As also presented at this conference, four-terminal efficiencies exceeding 32% have been attained. In this contribution, independent and electrically connected operation of the subcells in such tandem cells is examined. The optics of the tandem cell change significantly if a conducting interconnect, rather than an insulating glass slide, is required between the subcells. These effects are studied, and optically optimized structures for different types of tandem cell operation are presented. It is found that minimizing reflection at the conductive interface between the two cells while maintaining conductivity is the key challenge faced in such devices.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2022

Revisiting the growth rate hypothesis: Towards a holistic stoichiometric understanding of growth

The growth rate hypothesis (GRH) posits that variation in organismal stoichiometry (C:P and N:P ratios) is driven by growth-dependent allocation of P to ribosomal RNA. The GRH has found broad but not uniform support in studies across diverse biota and habitats. We synthesise information on how and why the tripartite growth-RNA-P relationship predicted by the GRH may be uncoupled and outline paths for both theoretical and empirical work needed to broaden the working domain of the GRH. We found strong support for growth to RNA (r 2 = 0.59) and RNA-P to P (r 2 = 0.63) relationships across taxa, but growth to P relationships were relatively weaker (r 2 = 0.09). Together, the GRH was supported in ~50% of studies. Mechanisms behind GRH uncoupling were diverse but could generally be attributed to physiological (P accumulation in non-RNA pools, inactive ribosomes, translation elongation rates and protein turnover rates), ecological (limitation by resources other than P), and evolutionary (adaptation to different nutrient supply regimes) causes. These factors should be accounted for in empirical tests of the GRH and formalised mathematically to facilitate a predictive understanding of growth.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Modeling suggests SARS-CoV-2 rebound after nirmatrelvir-ritonavir treatment is driven by target cell preservation coupled with incomplete viral clearance

In a subset of SARS-CoV-2-infected individuals treated with the antiviral nirmatrelvir-ritonavir, the virus rebounds following treatment. The mechanisms driving this rebound are not well understood. We used a mathematical model to describe the longitudinal viral load dynamics of 51 individuals treated with nirmatrelvir-ritonavir, 20 of whom rebounded. Target cell preservation, either by a robust innate immune response or initiation of N-R near the time of symptom onset, coupled with incomplete viral clearance, appears to be the main factor leading to viral rebound. Moreover, the occurrence of viral rebound is likely influenced by the time of treatment initiation relative to the progression of the infection, with earlier treatments leading to a higher chance of rebound. A comparison with an untreated cohort suggests that early treatments with nirmatrelvir-ritonavir may be associated with a delay in the onset of an adaptive immune response. Nevertheless, our model demonstrates that extending the course of nirmatrelvir-ritonavir treatment to a 10-day regimen may greatly diminish the chance of rebound in people with mild-to-moderate COVID-19 and who are at high risk of progression to severe disease. Altogether, our results suggest that in some individuals, a standard 5-day course of nirmatrelvir-ritonavir starting around the time of symptom onset may not completely eliminate the virus. Thus, after treatment ends, the virus can rebound if an effective adaptive immune response has not fully developed. These findings on the role of target cell preservation and incomplete viral clearance also offer a possible explanation for viral rebounds following other antiviral treatments for SARS-CoV-2.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

In Operando XANES Imaging of High Capacity Intermetallic Anodes for Lithium Ion Batteries

In operando 2D X-ray absorption near edge structure (XANES) imaging was performed near the Cu K-edge during cycling of Cu 6 Sn 5 composite anodes for lithium ion batteries. Galvanostatic lithiation and delithiation with intermittent constant voltage holds near reaction plateaus show evolution of absorption spectra for active material particles. XANES spectra obtained from images taken during cycling were compared to standard spectra for Cu, Cu 6 Sn 5 , and Li 2 CuSn. Chemical composition was assessed for Cu-containing phases. Distinct Cu, Cu 6 Sn 5 , and Li 2 CuSn regions were identified for each voltage plateau. Mechanical degradation, electrode particle fracture and expansion were observed during delithiation. Furthermore, movement of particles during cycling suggests that expansion also impacts the supporting secondary phases and the transport networks therein. These results demonstrate that spectroscopic X-ray imaging methods can clearly distinguish chemically distinct phases in alloy electrodes and have the versatility to observe the evolution of these phases during lithiation and delithiation.

25 ENERGY STORAGE↗
DOE OSTI2020

Smelly-Odor Webtool (Smelly) v1

Smelly is an interactive webtool displaying odor dispersion from various potential waste-to-energy sites across California. It currently displays data for dry anaerobic digestion technology with organic waste intake of 90,000 tons per year. The model addresses meteorological and geographical differences in offsite odor impacts (Jin et al. 2019). In addition to interactive display of odor dispersions, the embedded emission calculator provides two additional functionalities: (1) determine the impact distance for given onsite odor emission rates; and (2) determine allowable odor emission rates at given separation distance between the facility and its downwind communities. Please note that data and model is preliminary at this point and serve as a Proof of Concept. Additional data collection, modeling and research is needed for final application.

Jin, Ling↗
DOE OSTI2024

Automobile and Technology Lifecycle-Based Assignment (ATLAS) v2.0.12

ATLAS is a comprehensive vehicle transaction and technology adoption microsimulator. ATLAS evolves the fleet mix of individual households by simulating the transaction (vehicle addition, disposal, and replacement) and choice (vehicle type, vintage, powertrain, and tenure) decisions in response to the co-evolving demographics, land use, and vehicle technology simulations. Different from the existing vehicle models that are either static or aggregated (e.g. stock model), ATLAS is fully disaggregated and dynamic following a sequential and circumstantial decision-making trajectory. This fine-grained approach not only enhances the realism of the simulation but also provides a nuanced understanding of the dynamics inherent in vehicle fleet evolution. ATLAS outputs are fully compatible with subsequent agent-based transportation modeling system and can enable distributional effect analysis regarding the fleet turnover among heterogeneous populations. ATLAS expands the typical new sale focused vehicle choice modeling to including used vehicle transactions that are of increasing interests to understanding the vehicle adoption behavior among lower income households.

Jin, Ling↗
DOE OSTI2023

Progress and outlook of Sn–Pb mixed perovskite solar cells

Abstract Organic–inorganic hybrid perovskites have revolutionized solar cell research owing to their excellent material properties. Most previous research has been done on Pb-based perovskites. Recently, efforts to discover a Pb-free or Pb-less perovskite material with an ideal bandgap ranging 1.1–1.3 eV have led researchers to investigate Sn–Pb mixed perovskites. Sn–Pb mixed perovskites have a bandgap of ~ 1.25 eV, which is suitable for high-efficiency single-junction and perovskite/perovskite tandem solar cells. Moreover, the Pb content of Sn–Pb mixed perovskites is 50–60% lower than that of Pb-based perovskites, partially mitigating the Pb toxicity issue. However, incorporating Sn 2+ into the crystal structure also causes various drawbacks, such as inhomogeneous thin film morphologies, easy oxidation of Sn 2+ , and more vulnerable surface properties. Researchers have made substantial progress in addressing these challenges through improvements in compositional design, structural optimization, precursor design, and surface treatments. In this review, we provide a comprehensive overview of the progress in Sn–Pb mixed perovskite solar cells. Furthermore, we analyze the key variables and trends as well as provide an outlook for future directions in the research on Sn–Pb mixed perovskites. Graphical Abstract

14 SOLAR ENERGY↗
DOE OSTI2026

Optical suppression of defect-related photoluminescence in GeSn

Reports of photoluminescence from GeSn grown on Ge substrates by molecular beam epitaxy have been limited. We find that one limiting factor to observing photoluminescence is due to localized defect states marked by photoluminescence at 2400 nm and originating from the Ge substrate and buffer layer. In this study, we report on an optical study utilizing doped Ge(001) substrates to effectively suppress defect-related photoluminescence in GeSn layers by filling localized defect trap states. For this experiment, a GeSn layer with Sn content up to 10.5 ± 0.5% was grown on a doped Ge(001) substrate. Analysis of the physics of the photoluminescence spectrum collected from the GeSn thin film shows an emission at the expected wavelength of 2300 nm for 10.5 ± 0.5% Sn content and the absence of the typically observed defect-related signal at 2400 nm. This understanding is further confirmed using short-pulse optical excitation of the GeSn grown on undoped Ge substrates.

Chemical vapor deposition↗
DOE OSTI2024

Modeling the emergence of viral resistance for SARS-CoV-2 during treatment with an anti-spike monoclonal antibody

To mitigate the loss of lives during the COVID-19 pandemic, emergency use authorization was given to several anti-SARS-CoV-2 monoclonal antibody (mAb) therapies for the treatment of mild-to-moderate COVID-19 in patients with a high risk of progressing to severe disease. Monoclonal antibodies used to treat SARS-CoV-2 target the spike protein of the virus and block its ability to enter and infect target cells. Monoclonal antibody therapy can thus accelerate the decline in viral load and lower hospitalization rates among high-risk patients with variants susceptible to mAb therapy. However, viral resistance has been observed, in some cases leading to a transient viral rebound that can be as large as 3–4 orders of magnitude. As mAbs represent a proven treatment choice for SARS-CoV-2 and other viral infections, evaluation of treatment-emergent mAb resistance can help uncover underlying pathobiology of SARS-CoV-2 infection and may also help in the development of the next generation of mAb therapies. Although resistance can be expected, the large rebounds observed are much more difficult to explain. We hypothesize replenishment of target cells is necessary to generate the high transient viral rebound. Thus, we formulated two models with different mechanisms for target cell replenishment (homeostatic proliferation and return from an innate immune response antiviral state) and fit them to data from persons with SARS-CoV-2 treated with a mAb. We showed that both models can explain the emergence of resistant virus associated with high transient viral rebounds. We found that variations in the target cell supply rate and adaptive immunity parameters have a strong impact on the magnitude or observability of the viral rebound associated with the emergence of resistant virus. Both variations in target cell supply rate and adaptive immunity parameters may explain why only some individuals develop observable transient resistant viral rebound. Our study highlights the conditions that can lead to resistance and subsequent viral rebound in mAb treatments during acute infection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Understanding early HIV-1 rebound dynamics following antiretroviral therapy interruption: The importance of effector cell expansion

Most people living with HIV-1 experience rapid viral rebound once antiretroviral therapy is interrupted; however, a small fraction remain in viral remission for an extended duration. Understanding the factors that determine whether viral rebound is likely after treatment interruption can enable the development of optimal treatment regimens and therapeutic interventions to potentially achieve a functional cure for HIV-1. We built upon the theoretical framework proposed by Conway and Perelson to construct dynamic models of virus-immune interactions to study factors that influence viral rebound dynamics. We evaluated these models using viral load data from 24 individuals following antiretroviral therapy interruption. The best-performing model accurately captures the heterogeneity of viral dynamics and highlights the importance of the effector cell expansion rate. Our results show that post-treatment controllers and non-controllers can be distinguished based on the effector cell expansion rate in our models. Furthermore, these results demonstrate the potential of using dynamic models incorporating an effector cell response to understand early viral rebound dynamics post-antiretroviral therapy interruption.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Thermal Energy Grid Storage (TEGS) Using Multi-Junction Photovoltaics (MPV) (Final Technical Report)

The project aimed to develop a thermal energy storage battery that converts electricity to heat and stores heat at ultra-high temperatures (>2000°C) in graphite blocks. The thermal battery discharge uses TPV cells that directly convert thermal energy to electrical energy without any moving parts. All components of this technology were successfully demonstrated at the laboratory scale in this project. Development of extremely low cost (< $20/kWh) grid level energy storage is a crucial necessity to reach high penetrations of renewables. The thermal battery technology developed in this project is expected to meet the cost targets that would enable full renewable penetration. The project focused on four key aspects of this technology: Converting electricity to ultra-high temperature heat: This was done through development of graphite Joule heaters. Major issues related to arcing, heater evaporation and deterioration due to long term oxidation were addressed to ensure lifetime exceeding the service lifetime of the battery. Converting ultra-high temperature heat back to electricity: This was done through development of beyond state-of-the-art TPV cells. We demonstrated energy conversion efficiency of >40% that is a world record and exceeds the average energy conversion efficiency of turbines in the USA. The findings are peer-reviewed and published in Nature, and received a wide media attention globally. Protecting the TPV cells to ensure lifetime: Deposition of volatilized material, such as sublimated material or particles, on the TPV cell could greatly reduce the efficiency and lifetime of the TPV cells by blocking their view to the heat source and causing cell overheating. In this project we developed and demonstrated an approach that reduces the deposition rate, ensuring long > 30 year life. Technoeconomic feasibility and commercialization: In collaboration with the project’s technical advisory board, we developed a technoeconomic model. The model shows that, at large scales (> 1GWh) the thermal battery technology is projected to reach a cost of energy stored below $10/kWh-e, with a cost per unit power < $0.5/W-e and a roundtrip efficiency of 50%. These results, along with the technical achievements in the project led to the creation of a startup company (i.e., Fourth Power) that is pursuing commercialization of the technology.

25 ENERGY STORAGE↗
DOE OSTI2026

Collaborative R&D with REEL Solar Inc (REEL) to Understand and Overcome Performance Limitations in CdTe Solar Cells: Cooperative Research and Development (Final Report)

This CRADA will focus on processing, advanced characterization, and testing of photovoltaic materials and devices to understand and improve REEL CdTe solar technology. This will include examining process variations and different buffer, absorber, and contact layers from REEL and NLR to maximize performance. The unique and diverse advanced characterization tools at NLR, such as time-resolved photoluminescence, capacitance-voltage measurements, electron beam scattered diffraction, cathodoluminescence, electron microscopy, TOF-SIMS, and other measurements will be applied to characterize REEL processing to improve understanding and guide experimental directions. Accelerated stability and potential induced degradation tests will be used to analyze metastability, short-and-long term degradation, and improve bankability. A second and major thrust this period will be joint development of Si/CdTe tandem solar cells to overcome industry wide terrestrial solar efficiency limits with the two lowest cost and manufacturable solar materials today. This will include developing novel transparent back contacts that can be incorporated into tandem structures and other novel solar applications, detailed analysis of designs and configurations for CdTe/Si tandem modules, and prototyping REEL CdTe Technology with Si bottom cells in tandem structures.

14 SOLAR ENERGY↗
DOE OSTI2022

What Makes You Hold on to That Old Car? Joint Insights From Machine Learning and Multinomial Logit on Vehicle-Level Transaction Decisions

What makes you hold on to that old car? While the vast majority of household vehicles are still powered by conventional internal combustion engines, the progress of adopting emerging vehicle technologies will critically depend on how soon the existing vehicles are transacted out of the household fleet. Leveraging a nationally representative longitudinal data set, the Panel Study of Income Dynamics, this study examines how household decisions to dispose of or replace a given vehicle are: 1) influenced by the vehicle’s attributes, 2) mediated by households’ concurrent socio-demographic and economic attributes, and 3) triggered by key life cycle events. Coupled with a newly developed machine learning interpretation tool, TreeExplainer, we demonstrate an innovative use of machine learning models to augment traditional logit modeling to both generate behavioral insights and improve model performance. We find the two gradient-boosting-based methods, CatBoost and LightGBM, are the best performing machine learning models for this problem. The multinomial logistic model can achieve similar performance levels after its model specification is informed by TreeExplainer. Both machine learning and multinomial logit models suggest that while older vehicles are more likely to be disposed of or replaced than newer ones, such probability decreases as the vehicles serve the family longer. Pickup trucks and sport utility vehicles are less likely to be disposed of or replaced than cars, and leased vehicles are more likely to be transacted than owned vehicles. We find that married families, families with higher education levels, homeowners, and older families tend to keep their vehicles longer. Life events such as childbirth, residential relocation, and change of household composition and income are found to increase vehicle disposal and/or replacement. We provide additional insights on the timing of vehicle replacement or disposal, in particular, the presence of children and childbirth events are more strongly associated with vehicle replacement among younger parents.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Rich Dynamics of a General Producer–Grazer Interaction Model under Shared Multiple Resource Limitations

Organism growth is often determined by multiple resources interdependently. However, growth models based on the Droop cell quota framework have historically been built using threshold formulations, which means they intrinsically involve single-resource limitations. In addition, it is a daunting task to study the global dynamics of these models mathematically, since they employ minimum functions that are non-smooth (not differentiable). To provide an approach to encompass interactions of multiple resources, we propose a multiple-resource limitation growth function based on the Droop cell quota concept and incorporate it into an existing producer–grazer model. The formulation of the producer’s growth rate is based on cell growth process time-tracking, while the grazer’s growth rate is constructed based on optimal limiting nutrient allocation in cell transcription and translation phases. We show that the proposed model captures a wide range of experimental observations, such as the paradox of enrichment, the paradox of energy enrichment, and the paradox of nutrient enrichment. Together, our proposed formulation and the existing threshold formulation provide bounds on the expected growth of an organism. Moreover, the proposed model is mathematically more tractable, since it does not use the minimum functions as in other stoichiometric models.

59 BASIC BIOLOGICAL SCIENCES↗