Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Systematics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Stellar winds in the Small Magellanic Cloud

According to the predictions of line-driven stellar wind theory, the mass loss from luminous stars should be proportional to some power of the metallicity, yet previous studies have not shown this effect clearly. The authors have observed 22 main-sequence and giant O-type stars n the SMC with the low-resolution mode of the IUE in order to study the stellar winds in a particularly metal-poor galaxy. These stars are compared with carefully selected Galactic counterparts for wind terminal velocities and line strengths of C IV and N v. While the wind velocities in the SMC stars are confirmed to be systematically lower than in Galactic stars, as theory predicts, the mass-loss rates which are inferred from these data are comparable to those in the Galactic stars. The possible reasons for this result are discussed, including systematic effects in the data, assumed metal abundance, different ionization structure, and different physical parameters for the SMC stars.

Garmany, Catharine D.↗

Observations of photospheric magnetic fields and shear flows in flaring active regions

Horizontal flows in the photosphere and subsurface convection zone move the footpoints of coronal magnetic field lines. Magnetic energy to power flares can be stored in the corona if the flows drive the fields far from the potential configuration. Videodisk movies were shown with 0.5 to 1 arcsecond resolution of the following simultaneous observations: green continuum, longitudinal magnetogram, Fe I 5576 A line center (mid-photosphere), H alpha wings, and H alpha line center. The movies show a 90 x 90 arcsecond field of view of an active region at S29, W11. When viewed at speeds of a few thousand times real-time, the photospheric movies clearly show the active region fields being distorted by a remarkable combination of systematic flows and small eruptions of new flux. Magnetic bipoles are emerging over a large area, and the polarities are systematically flowing apart. The horizontal flows were mapped in detail from the continuum movies, and these may be used to predict the future evolution of the region. The horizontal flows are not discernable in H alpha. The H alpha movies strongly suggest reconnection processes in the fibrils joining opposite polarities. When viewed in combination with the magnetic movies, the cause for this evolution is apparent: opposite polarity fields collide and partially cancel, and the fibrils reconnect above the surface. This type of reconnection, driven by subphotospheric flows, complicates the chromospheric and coronal fields, causing visible braiding and twisting of the fibrils. Some of the transient emission events in the fibrils and adjacent plage may also be related.

Tarbell, T.↗

Research in planetary astronomy

The objective is the continuation of a long-term research program designed to study the composition, structure and processes operating on the surfaces of solar system objects using the Mauna Kea Observatory with techniques and modern instrumentation. Reflectance spectroscopy and multispectral imaging in the spectral region, 0.3 to 5.0 micrometer are the major techniques used, although thermal (10 micrometer and 20 micrometer) radiometry are used in some aspects of the research. Some specific projects include: (1) systematic spectral imaging observations of the Moon; (2) systematic spectral imaging and spectral monitoring of the Martian surface; (3) thermal radiometry of asteroids as part of the IRAS follow-up and other target specific programs; (4) searches for asteroid satellites and dust belts using a stellar coronagraph; and (5) studies of circumstellar disks using a stellar coronagraph. Progress for each of the programs included is discussed. minerals; (2) completed observations of lunar multi-ringed basins and crater deposits in search of high-Ca spectral anomalies; (3) completed data reduction of an additional 5 asteroids observed by the coronagraphic technique in the search for asteroids satellites and debris clouds; and (4) completed the reduction and calibration of 350 asteroids observed at 10 micron and 20 micron using the NASA IRTF.

Mccord, Thomas B.↗

Predictions of silicon avalanche photodiode detector performance in water vapor differential absorption lidar

Performance analyses are presented which establish that over most of the range of signals expected for a down-looking differential absorption lidar (DIAL) operated at 16 km the silicon avalanche photodiode (APD) is the preferred detector for DIAL measurements of atmospheric water vapor in the 730 nm spectral region. The higher quantum efficiency of the APD's, (0.8-0.9) compared to a photomultiplier's (0.04-0.18) more than offsets the higher noise of an APD receiver. In addition to offering lower noise and hence lower random error the APD's excellent linearity and impulse recovery minimize DIAL systematic errors attributable to the detector. Estimates of the effect of detector system parameters on overall random and systematic DIAL errors are presented, and performance predictions are supported by laboratory characterization data for an APD receiver system.

Kenimer, R. L.↗

Variation of the quiet sun at 21 cm - 1981-1987

The sun was imaged at a wavelength of about 21 cm during 1981-1987 using the VLA, the Green Bank 91-m telescope, the Arecibo 305 m telescope, and powerful maximum entropy image reconstruction techniques. There was a systematic decrease in the quiet sun's brightness temperature at 21 cm as the sun declined from sunspot maximum to sunspot minimum; this was accompanied by a systematic decrease in the sun's radius. The two-fold decrease in the electron number density in the solar transition region and low corona could have been the cause of these variations.

Bastian, T. S.↗

The mean ozone profile and its temperature sensitivity in the upper stratosphere and lower mesosphere - An analysis of LIMS observations

Multiple simultaneous LIMS (Limb Infrared Monitor of the Stratosphere) observations of both O3 and temperature T in the upper stratosphere and lower mesosphere are analyzed to derive O3-T correlations for comparisons with model calculations. The zonally averaged O3 profile is compared with results from a simplified photochemical model that assumes O3 to be in a photochemical steady state. The model profile is systematically lower than the observed profile. Key parameters are identified in which changes can systematically increase the O3 profile in both the stratosphere and the mesosphere. The LIMS-derived values for the sensitivity of O3 to changes in T are compared with equilibrium model calculations which include the T-driven opacity feedback effect on photodissociation rate constants. The theoretical O3 response to temperature perturbations is investigated. It is shown how the O3-T sensitivity coefficient is affected by zonal and vertical advection terms as well as by the photochemical coupling between O3 and T.

Froidevaux, Lucien↗

The kinematics of Milky Way halo gas. I - Observations of low-ionization species

Ultraviolet interstellar line day observed with the IUE toward 70 halo stars and four extragalactic sight lines are analyzed in a study of the large-scale kinematic properties of the Milky Way halo gas. The motions of the low-ionization gas is focused on. Large systematic velocities are found, and a pronounced asymmetry in the absorption characteristics of halo gas toward the Galactic poles is indicated. In the north, substantial amounts of material are falling toward the disk at velocities up to about 120 km/s in the most extreme case. Toward the south, low-ionization material shows no extreme or systematic motions.

Danly, Laura↗

Model interpretation of type III radio burst characteristics. II - Temporal aspects

A model of the radio emission region for kilometric type II bursts is used to interpret systematic variations observed in the temporal behavior of the burst parameters. The temporal behavior of the burst parameters observed by the ISEE-3 spacecraft is reviewed, and it is pointed out that the phase and modulation of the antenna signal vary in a systematic way with both time and observing frequency. The source azimuth is observed to drift with time, with the magnitude and sense of the drift depending on the location of the radio source relative to the observer. The modulation factor usually decreases uniformly with time and is frequently peaked near the burst onset. The model of the radio emission region is developed and used to obtain the intensity, phase, and modulation of the radio signal. Model results are used to show how the behavior of the burst parameters are related to attributes of the source region. It is shown that the temporal behavior of the radio parameters for an observed type II burst is well represented by the model.

Reiner, M. J.↗

Disturbance-Accommodating Controller Would Aim Antenna

Proposed system for aiming large paraboloidal-dish antenna based on theory of disturbance-accommodating control. Existing methods of control combined to suppress systematic errors. Approach is to cancel static errors for precise pointing of antenna by treating systematic misalignment errors, as well as servo-commands, as disturbances to controlled system. In controller, another vector estimated simultaneously with estimation of state vector. Other vector represents disturbance state, used in determining more-complete control strategy. Aiming improved through sequence of modifications solely in existing software.

Gresham, L. L.↗

Diffraction Analysis Of Distorted Reflector Antennas

Effects of systematic distortions of surfaces on radiation patterns predicted. Computer program for Diffraction Analysis of Reflector Antennas Subject to Systematic Distortions predicts performance of reflector antennas subject to sinusoidal, thermal, or gravitational distortions. Provides local interpolation algorithm readily applied to nonregular distribution of data. Developed in UNIVAC FORTRAN 77 for UNIVAC computer.

Rahmat-Samii, Yahya↗

The reduction correction in North America

An inverse Poisson integral technique was used to determine a gravity field on the geoid which, when continued by analytic free space methods to the topographic surface, agrees with the observed field. The computation is performed in three stages, each stage refining the previous solution using data at progressively increasing resolution (1 x 1 deg, 5 x 5', 5/8 x 5/8') from a decreasing area of integration. Reduction corrections are computed at 5/8 x 5/8' granularity by differencing the geoidal and surface values, smoothed by low-pass filtering and sub-sampled at 5' intervals. The 1 x 1 deg averages of the reduction corrections thus obtained for 172 1 x 1 deg squares in western North America are discussed. The 1 x 1 deg mean reduction corrections are predominantly positive, varying from -3 to +15 mgal, with values in excess of 5 mgal for 26 squares. Their mean and rms values are +2.4 and 3.6 mgal respectively and they correlate well with the mean terrain corrections. The mean and rms contributions from the three stages of computation are: 1 x 1 deg stage +0.15 and 0.7 mgal; 5 x 5' stage + 1.0 and 1.6 mgal; and 5/8 x 5/8' stage +1.3 and 1.8 mgal. These results reflect a tendency for the contributions to become larger and more systematically positive as the wavelengths involved become shorter. The results are discussed in terms of two mechanisms; the first is a tendency for the absolute values of both positive and negative anomalies to become larger when continued downwards and, the second, a non-linear rectification, due to the correlation between gravity anomaly and topographic height, which results in the values continued to a level surface being systematically more positive than those on the topography.

Martzen, P. D.↗

Distortions in memory for visual displays

Systematic errors in perception and memory present a challenge to theories of perception and memory and to applied psychologists interested in overcoming them as well. A number of systematic errors in memory for maps and graphs are reviewed, and they are accounted for by an analysis of the perceptual processing presumed to occur in comprehension of maps and graphs. Visual stimuli, like verbal stimuli, are organized in comprehension and memory. For visual stimuli, the organization is a consequence of perceptual processing, which is bottom-up or data-driven in its earlier stages, but top-down and affected by conceptual knowledge later on. Segregation of figure from ground is an early process, and figure recognition later; for both, symmetry is a rapidly detected and ecologically valid cue. Once isolated, figures are organized relative to one another and relative to a frame of reference. Both perceptual (e.g., salience) and conceptual factors (e.g., significance) seem likely to affect selection of a reference frame. Consistent with the analysis, subjects perceived and remembered curves in graphs and rivers in maps as more symmetric than they actually were. Symmetry, useful for detecting and recognizing figures, distorts map and graph figures alike. Top-down processes also seem to operate in that calling attention to the symmetry vs. asymmetry of a slightly asymmetric curve yielded memory errors in the direction of the description. Conceptual frame of reference effects were demonstrated in memory for lines embedded in graphs. In earlier work, the orientation of map figures was distorted in memory toward horizontal or vertical. In recent work, graph lines, but not map lines, were remembered as closer to an imaginary 45 deg line than they had been. Reference frames are determined by both perceptual and conceptual factors, leading to selection of the canonical axes as a reference frame in maps, but selection of the imaginary 45 deg as a reference frame in graphs.

Tversky, Barbara↗

Characterization of robotics parallel algorithms and mapping onto a reconfigurable SIMD machine

The kinematics, dynamics, Jacobian, and their corresponding inverse computations are six essential problems in the control of robot manipulators. Efficient parallel algorithms for these computations are discussed and analyzed. Their characteristics are identified and a scheme on the mapping of these algorithms to a reconfigurable parallel architecture is presented. Based on the characteristics including type of parallelism, degree of parallelism, uniformity of the operations, fundamental operations, data dependencies, and communication requirement, it is shown that most of the algorithms for robotic computations possess highly regular properties and some common structures, especially the linear recursive structure. Moreover, they are well-suited to be implemented on a single-instruction-stream multiple-data-stream (SIMD) computer with reconfigurable interconnection network. The model of a reconfigurable dual network SIMD machine with internal direct feedback is introduced. A systematic procedure internal direct feedback is introduced. A systematic procedure to map these computations to the proposed machine is presented. A new scheduling problem for SIMD machines is investigated and a heuristic algorithm, called neighborhood scheduling, that reorders the processing sequence of subtasks to reduce the communication time is described. Mapping results of a benchmark algorithm are illustrated and discussed.

Lee, C. S. G.↗

Erosional development of bedrock spur and gully topography in the Valles Marineris, Mars

Gully networks separated by resistant bedrock spurs are a common erosional feature along the escarpments that border the Valles Marineris. The resistant spur topography is best developed where the base of the slope is truncated by linear scarps interpreted as fault scarps. Regional variations in slope morphology imply that spur and gully topography undergoes a systematic progressive degradation through time associated with the erosional destruction of the basal fault scarps. The comparative morphometry of the divide networks indicates that the density of the spur networks and the number of first-order unbranched spurs decreases as the basal slope break becomes more sinuous. Abstraction of the spurs occurs through regolith storage in adjacent gullies at the slope base and the most degraded slope forms are entirely buried in talus. The basal fault scarps apparently control regolith transport by allowing debris to drain from the slope. As these basal scarps decay the slope base becomes increasingly sinuous and the slopes become transport limited. Dry mass-wasting may be the most important process acting on these slopes where a continually lowered base level is required to maintain the spur topography. In contrast to the Martian slopes, range front fault escarpments in the western U.S. show no systematic trend in spur network geometry as they are eroded. These weathering limited slopes are controlled by the more efficient removal of regolith through fluvial processes which rapidly create quasi-equilibrium drainage networks.

Patton, Peter C.↗

The correlated-k method for radiation calculations in nonhomogeneous atmospheres

The accuracy of the correlated-k method, which is a technique for radiation calculations with spectrally averaged data in nonhomogeneous atmospheres, is investigated. Comparisons are made for scattering and absorbing atmospheres containing CO2, H2O, and O3, and it is concluded that: (1) the errors in correlated-k are generally of order of magnitude 1 percent, (2) much larger errors occur only when a radiative quantity is very much smaller than its average value, (3) errors do not depend systematically on the gas molecule, the distributions of gases and aerosols, or on the aerosol optical properties, and (4) errors do not systematically increase with the order of differencing. It is shown that the multiplication property for transmission by overlapping bands can be incorporated into correlated-k, that temperature effects can be interpolated on a coarse grid, and that 10 quadrature points are often sufficient to average over complex spectral intervals containing thousands of lines.

Goody, Richard↗

Trellis-coded multidimensional phase modulation

A 2L-dimensional multiple phase-shift keyed (MPSK) (L x MPSK) signal set is obtained by forming the Cartesian product of L two-dimensional MPSK signal sets. A systematic approach to partitioning L x MPSK signal sets that is based on block coding is used. An encoder system approach is developed. It incorporates the design of a differential precoder, a systematic convolutional encoder, and a signal set mapper. Trellis-coded L x 4PSK, L x 8PSK, and L x 16PSK modulation schemes are found for L = 1-4 and a variety of code rates and decoder complexities, many of which are fully transparent to discrete phase rotations of the signal set. The new codes achieve asymptotic coding gains up to 5.85 dB.

Pietrobon, Steven S.↗

Phase-referenced VLBI observations of weak radio sources - Milliarcsecond position of Algol

The Fourier inversion of all the delay/rate referenced visibilities of Algol was used to form a 'dirty' map which has dramatically improved VLBI array sensitivity. The Algol system, in a very low state of activity with a total flux density of only 3 mJy, was observed alternatively with the reference source 0309 + 411, about 1 deg away, throughout the 7 hr VLBI experiment. By combining all the individual VLBI observations, the resulting coherent integration time for Algol is 4.2 hr and the corresponding SNR is 12. Internal consistency checks and an analysis of possible systematic astrometric errors indicate that the accuracy of the relative VLBI position of Algol is + or - 0.0005 arcsec in both coordinates and that unknown systematic effects are presently limiting this astrometric measurement.

Lestrade, J.-F.↗

The role of NDE in ceramic turbine engine component development

A systematic approach to the use of nondestructive evaluation (NDE) throughout the ceramic engine component development cycle is necessary to achieve the high reliability required for turbine engine applications. Specifically, NDE techniques must be developed and applied to component design, development, fabrication, and test to ensure adequate materials characterization. This approach has the potential of reducing ceramic component cost by optimizing the initial design and eliminating unacceptable components early in the fabrication cycle. Although research NDE techniques have been developed that have the potential to solve the problems of ceramic component inspection, systematic application of these NDE techniques for inspection and process control has not yet occurred. The application of NDE techniques for both material characterization and flaw detection is discussed as well as an approach for applying NDE throughout the fabrication process to achieve highly reliable ceramic components.

Minter, Janet↗