Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface Deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Nematic transitions in iron pnictide superconductors imaged with a quantum gas

The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) uses an atomic Bose–Einstein condensate to measure magnetic fields emanating from solid-state samples. The quantum sensor does so with unprecedented d.c. sensitivity at micrometre resolution, from room to cryogenic temperatures. An additional advantage of the SQCRAMscope is the preservation of optical access to the sample so that magnetometry imaging of, for example, electron transport may be performed in concert with other imaging techniques. Here, we apply this multimodal imaging capability to the study of nematicity in iron pnictide high-temperature superconductors, where the relationship between electronic and structural symmetry breaking resulting in a nematic phase is under debate. We combine the SQCRAMscope with an in situ microscope that measures optical birefringence near the surface. This enables simultaneous and spatially resolved detection of both bulk and near-surface manifestations of nematicity via transport and structural deformation channels, respectively. By performing local measurements of emergent resistivity anisotropy in iron pnictides, we observe sharp, nearly concurrent transport and structural transitions. More broadly, these measurements demonstrate the SQCRAMscope’s ability to reveal important insights into the physics of complex quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Steady-State Mechanical Analysis for Target Assembly in the Material Plasma Exposure eXperiment Facility

The Material Plasma Exposure eXperiment (MPEX) steady-state linear plasma facility is currently under design at Oak Ridge National Laboratory to expose target specimens to fusion divertor regimes. The neutron-irradiated target is actively cooled and remote handled in the MPEX facility for conducting plasma-material–interaction (PMI) experiments. Here, the steady-state stresses in the target and target assembly system are investigated using two-dimensional (2-D) and three-dimensional (3-D) models to provide expected stresses/strains under the heat loads to which various system components would be exposed during MPEX operation. The calculated temperatures from the 2-D axisymmetric mechanical model were found to be in excellent agreement with those from the full 3-D thermohydraulic model, providing a strong model validation. Numerical simulation results for the steady-state mechanical model indicate nonuniform distributions for the temperature, stress, and deformation within the critical components. For the initial design, the deformation results indicate possible gap openings between contacting surfaces below the plasma-facing materials. To reduce the possibility of interfacial gap opening, the target assembly was slightly changed and evaluated using the 2-D stress model. Numerical simulation results indicate that the interfacial gap openings can be minimized without drastically changing the entire target assembly. The stress-strain conditions for the target will be further used to assess the appropriate operation during MPEX experiments and gain insight into materials science phenomena during PMI.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Bubble Transport through a Porous Lattice with an Applied Inlet Flow

Within gas-evolving electrochemical systems, bubbles negatively impact performance by covering electrode active sites for reactions, blocking electric field lines, and obstructing liquid electrolyte flow causing pressure buildup. Recent additive manufacturing advances have enabled tuned porous electrode microstructures to be created, but producing systems that maximize electrochemical throughput and minimize bubble impact remains challenging. Thus, improved physical understanding of and modeling capabilities for bubble behavior are critical to improve electrolyzer design. To address this need, this study examines rising stage bubbles within a lattice with an applied liquid flow—an underexplored regime that strongly influences an electrochemical bubble’s fate. Notably, theoretical predictions and resolved bubble simulations are complemented by experiments from a 3D-printed visualization cell that matches the simulation geometry. The minimum threshold flow rate to achieve bubble breakthrough is found to be larger for higher porosities and for smaller bubbles. Different-sized bubbles decrease expected electrochemical performance in different ways; smaller bubbles tend to stay stuck but cover less solid surface, while larger bubbles more readily break through but cover more surface while in the lattice. The bubble trajectory, deformation, and contact area provide insight into these different behaviors. These findings provide design guidelines toward creating more effective electrolyzers.

Guo, Jack [Lawrence Livermore National Laboratory ↗
DOE OSTI2026

Mechanism-Resolved PFM of Ferroionic and Ferroelectric Responses in Thickness-Gradient Hf 0.5 Zr 0.5 O 2 Libraries

Resolving growth mechanisms and thickness evolution of functional properties is one of the key tasks in materials discovery and optimization involving thin-film materials, traditionally requiring significant experimental budgets. Here we introduce the combination of thickness-gradient libraries and automated scanning probe microscopy as a systematic pathway to elucidate growth modes and disentangle ferroelectric and electrochemical contributions in ferroelectric thin films. As a model system, we explore the Hf 0.5 Zr 0.5 O 2 (HZO) gradient thin films grown on La x Sr 1-x MnO 3 (LSMO) bottom electrode thin films. Automated piezoresponse force microscopy, spectroscopy, and lithography reveals that irreversible topographic deformation arises from electrochemical activity at the LSMO surface, whereas reversible phase inversion in HZO reflects ferroelectric switching. Automated topography height-map scans are used to further quantify nucleation density, particle-size evolution, and roughness correlations across the thickness-gradient, demonstrating that improved plume stabilization during growth suppresses interfacial reactions and promotes dense, fine-grained HZO conducive to ferroelectric phase formation. This combined materials-engineering and automated-SPM framework establishes a platform for high-throughput, mechanism-resolved characterization of ferroionic and ferroelectric responses in complex oxide films.

FOS: Physical sciences↗
NASA NTRS1971

Friction, wear, and lubrication in vacuum

A review of studies and observations on the friction, wear, and lubrication behavior of materials in a vacuum environment is presented. The factors that determine and influence friction and wear are discussed. They include topographical, physical, mechanical, and the chemical nature of the surface. The effects of bulk properties such as deformation characteristics, fracture behavior, and structure are included.

Buckley, D. H.↗
NASA NTRS1973

Low-closing-force seal

Compress soft, inert metal gasket between cone and corresponding socket to attach tubes to vessels containing gas samples. Technique effects seals with minimum of applied force and does not contaminate contents. Seal is formed when port connector is pushed firmly into its socket. Gold washer is deformed and forced to flow into imperfections in surfaces.

Bergquist, L. E.↗
NASA NTRS1981

Development of a simplified procedure for thrust chamber life prediction

An analytical design procedure for predicting thrust chamber life considering cyclically induced thinning and bulging of the hot gas wall is developed. The hot gas wall, composed of ligaments connecting adjacent cooling channel ribs and separating the coolant flow from the combustion gas, is subjected to pressure loading and severe thermal cycling. Thermal transients during start up and shut down cause plastic straining through the ligaments. The primary bending stress superimposed on the alternate in-plane cyclic straining causes incremental bulging of the ligaments during each firing cycle. This basic mechanism of plastic ratcheting is analyzed and a method developed for determining ligament deformation and strain. The method uses a yield surface for combined bending and membrane loading to determine the incremental permanent deflection and pregressive thinning near the center of the ligaments which cause the geometry of the ligaments to change as the incremental strains accumulate. Fatigue and tensile instability are affected by these local geometry changes. Both are analyzed and a failure criterion developed.

Porowski, J. S.↗
NASA NTRS1982

Subsonic aerodynamic and flutter characteristics of several wings calculated by the SOUSSA P1.1 panel method

Several applications of the steady, oscillatory, and unsteady subsonic and supersonic aerodynamics (SOUSSA) computer program to wings with steady and oscillatory motion, including flutter, are discussed. The program employs a generalized Green's function to the full, time-dependent potential-flow equation to obtain an integral equation for the velocity potential at any point in a flow, even points on a body or whole bodies in a flow. Aerodynamic calculations are provided for two rectangular wings, a clipped-tip delta wing, and two swept wings with and without a fuselage. The number and distribution of the finite element panels are varied in order to demonstrate the convergence of the results. The results are shown to be close to those of lifting-surface theory, and further applications with bodies having deformities, arbitrary shapes, motions, and deformations are indicated.

Yates, E. C., Jr.↗
NASA NTRS1985

Geologic processes on Venus: An update

Studies of Venera 15 and 16 radar image and altimetry data and reevaluation of Pioneer Venus and earlier Venera data have greatly expanded the perception of the variety and complexity of geologic processes on Venus. PV data have discriminated four highland regions (each different in geomorphic appearance), a large upland rolling plains region, and smaller areas of lowland plains. Two highland volcanic centers were identified that may be presently active, as suggested by their geomorphologic appearance combined with positive gravity anomalies, lightning strike clusters, and a change in SO2 content in the upper atmosphere. Geochemical data obtained by the Venera landers have indicated that one upland area and nearby rolling plains are composed of volcanic rocks, probably basalts or syenites. New Venera radar images of the Ishtar Terra region show folded and/or faulted linear terrain and associated volcanic features that may have been deformed by both compressional and extensional forces. Lowland surfaces resemble the mare basaltic lava flows that fill basins on the Moon, Mars and Earth. Ubiquitous crater like forms may be of either volcanic or impact origin; the origin of similar lunar features was determined by the character of their ejecta deposits.

Masursky, H.↗
NASA NTRS1985

Structure and properties of polyethylene films used in heavy lift balloons

The following features of five polyethylene films used by NASA in the construction of heavy lift balloons have been examined: molecular weight, molecular weight distribution, branching, melting behavior, density, surface texture, birefringence, orientation of crystalline regions, unlaxial deformation in the machine and transverse directions, and the effect of sample geometry and strain rate on deformation behavior. The goal of this exploratory study was to determine whether there are significant differences in any of the above mentioned features, or combination of features between the films. The acquisition of such information is a first step towards determining whether there are any specific correlations between film characteristics and the incidence of catastrophic failure of balloons during ascent through the troposphere. This exploratory study has resulted in the identification of similarities and differences between various features of the films.

Khoury, F.↗
NASA NTRS1991

Uranus atmospheric dynamics and circulation

The observations, models, and theories relevant to the atmospheric dynamics and meteorology of Uranus are discussed. The available models for the large-scale heat transport and atmospheric dynamics as well as diagnostic interpretations of the Voyager data are reviewed. Some pertinent ideas and questions regarding the global circulation balance are considered, partly in comparison with other planetary atmospheres. The available data indicate atmospheric rotation at midlatitudes nearly 200 m/s faster than that of the planetary magnetic field. Analysis of the dynamical deformation of the shape and size of isobaric surfaces measured by the Voyager radio-occultation experiment suggests a subrotating equator at comparable altitudes. Infrared temperature retrievals above the cloud deck indicate a smaller equator-to-pole contrast than expected for purely radiative-convective equilibrium, but show local variations implying a latitudinally correlated decrease with altitude in the cloud-tracked wind.

Allison, Michael↗
NASA NTRS1994

Thermocapillary flow with evaporation and condensation and its effect on liquid retention in low-G fluid acquisition devices

The steady motion, thermal and free surface behavior of a volatile, wetting liquid in microgravity are studied using scaling and numerical techniques. The objective is to determine whether the thermocapillary and two-phase convection arising from thermodynamic nonequilibrium along the porous surfaces of spacecraft liquid acquisition devices could cause the retention failures observed with liquid hydrogen and heated vapor pressurant. Why these devices seem immune to retention loss when pressurized with heated helium or heated directly through the porous structure was also examined. Results show that highly wetting fluids exhibit large negative and positive dynamic pressure gradients towards the meniscus interline when superheated and subcooled, respectively. With superheating, the pressure variation and recoil force arising from liquid/vapor phase change exert the same influence on surface morphology and promote retention. With subcooling, however, the pressure distribution produces a suction that degrades mechanical equilibrium of the surface. This result indicates that thermocapillary-induced deformation arising from subcooling and condensation is the likely cause for retention loss. In addition, increasing the level of nonequilibrium by reducing accommodation coefficient suppresses deformation and explains why this failure mode does not occur in instances of direct screen heating or pressurization with a heated inert gas.

Schmidt, George R.↗
NASA NTRS1999

Practical Aerodynamic Design Optimization Based on the Navier-Stokes Equations and a Discrete Adjoint Method

Compressible and incompressible versions of a three-dimensional unstructured mesh Reynolds-averaged Navier-Stokes flow solver have been differentiated and resulting derivatives have been verified by comparisons with finite differences and a complex-variable approach. In this implementation, the turbulence model is fully coupled with the flow equations in order to achieve this consistency. The accuracy demonstrated in the current work represents the first time that such an approach has been successfully implemented. The accuracy of a number of simplifying approximations to the linearizations of the residual have been examined. A first-order approximation to the dependent variables in both the adjoint and design equations has been investigated. The effects of a "frozen" eddy viscosity and the ramifications of neglecting some mesh sensitivity terms were also examined. It has been found that none of the approximations yielded derivatives of acceptable accuracy and were often of incorrect sign. However, numerical experiments indicate that an incomplete convergence of the adjoint system often yield sufficiently accurate derivatives, thereby significantly lowering the time required for computing sensitivity information. The convergence rate of the adjoint solver relative to the flow solver has been examined. Inviscid adjoint solutions typically require one to four times the cost of a flow solution, while for turbulent adjoint computations, this ratio can reach as high as eight to ten. Numerical experiments have shown that the adjoint solver can stall before converging the solution to machine accuracy, particularly for viscous cases. A possible remedy for this phenomenon would be to include the complete higher-order linearization in the preconditioning step, or to employ a simple form of mesh sequencing to obtain better approximations to the solution through the use of coarser meshes. An efficient surface parameterization based on a free-form deformation technique has been utilized and the resulting codes have been integrated with an optimization package. Lastly, sample optimizations have been shown for inviscid and turbulent flow over an ONERA M6 wing. Drag reductions have been demonstrated by reducing shock strengths across the span of the wing. In order for large scale optimization to become routine, the benefits of parallel architectures should be exploited. Although the flow solver has been parallelized using compiler directives. The parallel efficiency is under 50 percent. Clearly, parallel versions of the codes will have an immediate impact on the ability to design realistic configurations on fine meshes, and this effort is currently underway.

Grossman, Bernard↗
NASA NTRS1999

Practical Aerodynamic Design Optimization Based on the Navier-Stokes Equations and a Discrete Adjoint Method

The technical details are summarized below: Compressible and incompressible versions of a three-dimensional unstructured mesh Reynolds-averaged Navier-Stokes flow solver have been differentiated and resulting derivatives have been verified by comparisons with finite differences and a complex-variable approach. In this implementation, the turbulence model is fully coupled with the flow equations in order to achieve this consistency. The accuracy demonstrated in the current work represents the first time that such an approach has been successfully implemented. The accuracy of a number of simplifying approximations to the linearizations of the residual have been examined. A first-order approximation to the dependent variables in both the adjoint and design equations has been investigated. The effects of a "frozen" eddy viscosity and the ramifications of neglecting some mesh sensitivity terms were also examined. It has been found that none of the approximations yielded derivatives of acceptable accuracy and were often of incorrect sign. However, numerical experiments indicate that an incomplete convergence of the adjoint system often yield sufficiently accurate derivatives, thereby significantly lowering the time required for computing sensitivity information. The convergence rate of the adjoint solver relative to the flow solver has been examined. Inviscid adjoint solutions typically require one to four times the cost of a flow solution, while for turbulent adjoint computations, this ratio can reach as high as eight to ten. Numerical experiments have shown that the adjoint solver can stall before converging the solution to machine accuracy, particularly for viscous cases. A possible remedy for this phenomenon would be to include the complete higher-order linearization in the preconditioning step, or to employ a simple form of mesh sequencing to obtain better approximations to the solution through the use of coarser meshes. . An efficient surface parameterization based on a free-form deformation technique has been utilized and the resulting codes have been integrated with an optimization package. Lastly, sample optimizations have been shown for inviscid and turbulent flow over an ONERA M6 wing. Drag reductions have been demonstrated by reducing shock strengths across the span of the wing.

Grossman, Bernard↗
NASA NTRS1997

Chicxulub Impact Ejecta in Belize

Chicxulub ejecta deposits in Belize provide the closest exposures of ejecta to the crater and the only exposures of proximal ejecta deposited in a terrestrial environment. A quarry on Albion Island in northern Belize exposes Late Cretaceous, possibly Maastrichtian, carbonate platform sediments that were folded, eroded, and subaerially weathered prior to the deposition of coarse ejecta from Chicxulub. These ejecta deposits are composed of a basal, about 1-m-thick clay and dolomite Spheroid Bed overlain by a about 15-m-thick coarse Diamictite Bed. Many and perhaps most of the clay spheroids are altered glass. Many dolomite spheroids have concentric layers and angular cores are probably of accretionary lapilli origin. A slight Ir concentration (111-152 ppt) was detected in the base of the Spheroid Bed. The Diamictite Bed contains about 10% altered glass, rare shocked quartz, 3-8 m diameter boulders and striated and polished cobbles, one with a penetrating rock chip that plastically deformed the cobble. Ejecta deposits extend to the surface at Albion and the maximum thickness in this area is not known. Ejecta deposits are exposed in several roadside quarries in the Cayo District of central Belize. The Late Cretaceous here is also represented by carbonate platform sediments. The upper surface of the carbonate platform is a highly irregular and extensively recrystallized horizon possibly representing deep karst weathering. Approximately 30 in of diamictite overlies this horizon with a texture similar to the Diamictite Bed at the Albion quarry, but with a more diverse lithology. In three locations the Cayo diamictites, contain red clay layers with abundant polished and striated limestone pebbles and cobbles called Pook's Pebbles, several of which have penetrating rock chips and ablated surfaces. We interpret the Albion Spheroid Bed as a deposit from the impact vapor plume and the Albion and Cayo diamictites as the result of a turbulent flow that contained debris derived from the ejecta curtain and local scouring. The polished, striated, and ablated Pook's Pebbles are interpreted as high altitude ballistic ejecta.

Ocampo, A.↗
NASA NTRS2003

Rapid Technology Assessment via Unified Deployment of Global Optical and Virtual Diagnostics

This paper discusses recent developments in rapid technology assessment resulting from an active collaboration between researchers at the Air Force Research Laboratory (AFRL) at Wright Patterson Air Force Base (WPAFB) and the NASA Langley Research Center (LaRC). This program targets the unified development and deployment of global measurement technologies coupled with a virtual diagnostic interface to enable the comparative evaluation of experimental and computational results. Continuing efforts focus on the development of seamless data translation methods to enable integration of data sets of disparate file format in a common platform. Results from a successful low-speed wind tunnel test at WPAFB in which global surface pressure distributions were acquired simultaneously with model deformation and geometry measurements are discussed and comparatively evaluated with numerical simulations. Intensity- and lifetime-based pressure-sensitive paint (PSP) and projection moire interferometry (PMI) results are presented within the context of rapid technology assessment to enable simulation-based R&D.

Jordan, Jeffrey D.↗
NASA NTRS1993

The Earth Viewed as a Deforming Polyhedron: Method and Results

GPS is quite unlike any other geodetic technique, because we can use it to look at the Earth with high spatial and temporal resolution. For example, the GPS global network provides us with a daily snapshot of the Earth, allowing us to look with high temporal resolution at the motion of sites before, during, and after a large earthquake.The main focus of this paper is to view the Earth as an evolving polyhedron, whose vertices are defined by the GPS sites.

GPS global network GPS GPS sites deforming polyhed↗
NASA NTRS2008

Jet Engine Fan Blade Containment Using an Alternate Geometry

With a goal of reducing jet engine weight, simulations of a fan blade containment system with an alternate geometry were tested and analyzed. A projectile simulating a fan blade was shot at two alternate geometry containment case configurations using a gas gun. The first configuration was a flat plate representing a standard case configuration. The second configuration was a flat plate with a radially convex curve section at the impact point. The curved surface was designed to force the blade to deform plastically, dissipating energy before the full impact of the blade is received by the plate. The curved case was able to tolerate a higher impact velocity before failure. The computational model was developed and correlated with the tests and a weight savings assessment was performed. For the particular test configuration used in this study the ballistic impact velocity of the curved plate was approximately 60 m/s (200 ft/s) greater than that of the flat plate. For the computational model to successfully duplicate the test, the very high strain rate behavior of the materials had to be incorporated.

Carney, K.S.↗