Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Suppression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Open-Loop Acquisition Of Suppressed Carrier Signals

Three digital techniques for open-loop acquisition of suppressed carrier signals in presence of binary-phase-shift-keyed (BPSK) modulation representing non-return-to-zero (NRZ) data symbols. Based on assumption that offset, tau, between timing of symbols and clock in receiver unknown, but fixed fraction of symbol period, T. In all three, fast Fourier transforms (FFT's) performed on outputs of integrate-and-dump filters that are parts of Costas-type loops used to demodulate BPSK signals. Timing of integrate-and-dump filters constant. Outputs mixed to obtain an error signal.

Shah, Biren N.↗
NASA NTRS1991

Suppressed carrier full-spectrum combining

A technique to accomplish full spectrum arraying where all the telemetry power is put into the subcarrier sidebands (suppressed carrier) is described. The matched filter needed in each antenna prior to cross correlation for deriving the coherence delay and phase offsets is an open loop version of the telemetry phase lock loop provided in the Advanced Digital Receiver. In analogy with a Costas loop telemetry receiver, a squaring loss is derived, and a signal to noise ratio for the cross correlation loop phase is presented.

Rogstad, D. H.↗
NASA NTRS1991

Helicopter air resonance modeling and suppression using active control

A coupled rotor/fuselage helicopter analysis with the important effects of blade torsional flexibility, unsteady aerodynamics, and forward flight is presented. Using this mathematical model, a nominal configuration is selected with an air resonance instability throughout most of its flight envelope. A multivariable compensator is then designed using two swashplate inputs and a single-body roll rate measurement. The controller design is based on the linear quadratic Gaussian technique and the loop transfer recovery method. The controller is shown to suppress the air resonance instability throughout a wide range of helicopter loading conditions and forward flight speeds.

Takahashi, M. D.↗
NASA NTRS1992

An analytical and experimental investigation of flutter suppression via piezoelectric actuation

The feasibility of using piezoelectric material actuators to suppress flutter was investigated analytically and experimentally. For this purpose, a two-degree of freedom wind-tunnel model was designed, analyzed, and tested. A digital control law was designed and implemented based on a discretized model. Experiments consisted of open- and closed-loop flutter tests. It is shown that analytical predictions agree well with experimental results. The open-loop flutter velocity prediction was 3.5 percent conservative, while the closed-loop prediction was 7.6 percent conservative. Results of the analysis showed that the flutter velocity would be increased by 15.7 percent with the control law, while 20 percent improvement was observed experimentally.

Heeg, Jennifer↗
NASA NTRS1991

Sizing of active piezoelectric struts for vibration suppression on a space-based interferometer

The present paper concerns itself with the active suppression of mechanical vibrations on a representative future spaceborne optical interferometer. This is accomplished by the incorporation of a set of piezoelectric struts into the truss structure of the interferometer and the use of these active struts to modify the damping and stiffness characteristics of the truss. It is shown that vibration propagation can be significantly reduced through the use of very simple control laws. It is further shown that the force and stroke requirements for the active struts for this application are rather modest and fall well within the capabilities already demonstrated by prototype hardware in ground testing.

Sirlin, S. W.↗
NASA NTRS1990

On the nature of the interaction between structures and actuators in vibration suppression

This lecture presents a summary of work on the analysis of the interaction between a structure, an actuator used to suppress the vibration of the structure, and the control law implemented by the actuator. Two control applications are considered. First, a proof-mass actuator with experimentally verified dynamics, capable of being used in a space structure configuration is examined. This is connected to a cantilevered beam modeled as a single degree of freedom system. Secondly, an electric motor, again with experimentally verified dynamics, is used to slew a beam modeled by a partial differential equation. Both the experimental and numerical configuration predict the presence of potential instabilities in system performance if proper consideration is not given to interactions between the control law, the structure and the actuator. In addition, an understanding of the interaction is shown to greatly effect performance. In particular it is shown that judicious choice of actuator parameters greatly improves closed loop performance.

Inman, Daniel J.↗
NASA NTRS1992

Application of piezoelectric devices to vibration suppression - From modeling and controller designs to implementation

Embedded piezoelectric devices may be ideally suited for vibration control of space structures, which lack an inertial ground. When subjected to an input voltage, an embedded piezoelectric actuator changes its dimensions, which in turn generates a pair of forces exerted on adjacent structural members. From the direct piezoelectric effect, an embedded piezoelectric transducer generates an electric charge proportional to the structural dynamic response. In this paper, the implementation, testing and modeling of an active truss structure consisting of piezoelectric sensors and actuators are described. Linear quadratic Gaussian (LQG), second-order, and direct rate feedback control schemes are designed to suppress the vibrations of the active structure. Simulation and test results are presented. It is shown that special model reduction considerations are required to achieve good correlation between test and analysis.

Won, Chin C.↗
NASA NTRS1993

Suppressing Spurious Reflections In An Interferometer

Dynamic-aperture fringe discriminator is simple device enhancing operation of interferometer of spherical-wave-front type used to test lenses, telescopes, and other optical instruments. Device suppresses reflections from surfaces of refractive optical elements in instrument and/or test setup. Reflections from refractive optical components eliminated by blocking half of interferometer aperture.

Steimle, Lawrence J.↗
NASA NTRS1992

X-ray suppression in gamma-ray bursts through resonant Compton scattering

An X-ray that scatters with an electron in the first Landau level of a strong magnetic field is converted into a gamma ray. This process has a resonant cross section at X-ray energies and is therefore highly likely to occur even when the first Landau level is sparsely populated. Converted X-rays are cyclotron absorbed, maintaining the equilibrium between the cyclotron photon density and the population of the first Landau level. By suppressing a neutron star's black body emission, this mechanism can produce a gamma-ray burst with a low X-ray flux.

Brainerd, J. J.↗
NASA NTRS1993

Nonlinear effects of a modal domain optical fiber sensor in a vibration suppression control loop for a flexible structure

Recently, a modal domain optical fiber sensor has been demonstrated as a sensor in a control system for vibration suppression of a flexible cantilevered beam. This sensor responds to strain through a mechanical attachment to the structure. Because this sensor is of the interferometric type, the output of the sensor has a sinusoidal nonlinearity. For small levels of strain, the sensor can be operated in its linear region. For large levels of strain, the detection electronics can be configured to count fringes. In both of these configurations, the sensor nonlinearity imposes some restrictions on the performance of the control system. In this paper we investigate the effects of these sensor nonlinearities on the control system, and identify the region of linear operation in terms of the optical fiber sensor parameters.

Lindner, D. K.↗
NASA NTRS1992

Digital implementation of vibration suppression controllers for LSS

A synthesis procedure for positivity controllers is described, and both simulation and experimental results for vibration suppression control experiments at the NASA Marshall ACES and the NASA Langley MiniMAST ground test facilities are presented. Positivity-designed controllers provide general stability robustness to modeling errors, coupled with controller phase compensation which provides stability margins required for actual implementation. A multivariable scaling method of positivity-designed controllers is used for the on-line tuning of nominal digital controllers. A phase compensation method uses model information to predict system measurements and controller states for compensating the nominal controllers for unmodeled time delays in the system.

Bosse, A.↗
NASA NTRS1994

Vibration suppression with approximate finite dimensional compensators for distributed systems: Computational methods and experimental results

Based on a distributed parameter model for vibrations, an approximate finite dimensional dynamic compensator is designed to suppress vibrations (multiple modes with a broad band of frequencies) of a circular plate with Kelvin-Voigt damping and clamped boundary conditions. The control is realized via piezoceramic patches bonded to the plate and is calculated from information available from several pointwise observed state variables. Examples from computational studies as well as use in laboratory experiments are presented to demonstrate the effectiveness of this design.

Banks, H. T.↗
NASA NTRS1994

Sub-Poissonian light and photocurrent shot-noise suppression in closed opto-electronic loop

We examine experimentally photocurrent noise reduction in the opto-electronic closed loop. Photocurrent noise density 12.5 dB below the shot-noise was observed. So large suppression was not reached in previous experiments and cannot be explained in terms of an ordinary sub-Poissonian light in the loop. We propose the concept of anticorrelation state for the description of light in the loop.

Masalov, A. V.↗
NASA NTRS1992

Fundamental concepts in the suppression of delamination buckling by stitching

Elementary results are presented for the buckling of stitched, laminated composites containing delamination cracks. The stitching fibers are assumed to provide continuous, linear restoring tractions opposing the deflection of the delaminated layer adjacent to the crack. It is shown that there exists a characteristic length a(0) for buckling: if the length, 2a, of the delamination crack exceeds 2a(0), then, when buckling occurs, it will consist of waves of period 2a(0) and will usually not span the whole delamination. Simple expressions are derived for the critical buckling load and the minimum stitching density required to suppress buckling of the delaminated layer.

Cox, B. N.↗
NASA NTRS1995

Residual and suppressed-carrier arraying techniques for deep-space communications

Three techniques that use carrier information from multiple antennas to enhance carrier acquisition and tracking are presented. These techniques in combination with baseband combining are analyzed and simulated for residual and suppressed-carrier modulation. It is shown that the carrier arraying using a single carrier loop technique can acquire and track the carrier even when any single antenna in the array cannot do so by itself. The carrier aiding and carrier arraying using multiple carrier loop techniques, on the other hand, are shown to lock on the carrier only when one of the array elements has sufficient margin to acquire the carrier on its own.

Shihabi, M.↗
NASA NTRS1995

Neural-Network Controller For Vibration Suppression

Neural-network-based adaptive-control system proposed for vibration suppression of flexible space structures. Controller features three-layer neural network and utilizes output feedback. Measurements generated by various sensors on structure. Feed forward path also included to speed up response in case plant exhibits predominantly linear dynamic behavior. System applicable to single-input single-output systems. Work extended to multiple-input multiple-output systems as well.

Boussalis, Dhemetrios↗