Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solvent effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Effect of Variable Gravity on Evaporation of Binary Fluids in a Capillary Pore Evaporator

The research project focuses on experimental investigation of the capillary-pumped evaporative heat transfer phenomenon. The objective is to examine whether the heat transfer and stability of a heated meniscus in a capillary pore can be enhanced by adding trace amounts of a non-volatile solute to a solvent and to understand the changes that occur. The experimental setup consists of a single pore evaporator connected to a reservoir which supplies liquid to the evaporator. In addition to the experiments of capillary-pumped evaporation, a parallel experimental study has been conducted to systematically investigate the effects of gravity as well as the effects of bulk composition on the heat transfer characteristics of evaporating binary thin films near the contact line region along an inclined heated surface. To investigate the buoyancy effects on evaporation along an inclined heated surface, the angle of inclination from a horizontal plane was varied fro 15 C to 90 C. An optimum concentration between 0.5% and 1% decane in pentane/decane solutions has been demonstrated at different angles of inclination. Improved heat transfer was found for the geometry with the smallest angle of inclination of 15 degrees. In addition, flow visualization has revealed that at low inclination angles effective heat transfer takes place primarily due to an extension of the thin film near the contact line. At these low inclination angles, the optimum concentration is associated with enhanced wetting characteristics and reduced thermocapillary stresses along the interface.

Girgis, Morris M.↗
DOE OSTI2026

Investigating Lignin Aggregation and Interactions with Solvents during γ-Valerolactone (GVL) Pretreatment: A Combined Small Angle Neutron Scattering and Molecular Simulations Study

The strong tendency of lignin to aggregate in solution, coupled with limited understanding of how its molecular structure governs this behavior, hinders its effective utilization in biorefineries. Here, in this study, we investigated the solution behavior of lignin extracted from poplar using γ-valerolactone/water (GVL/H2O, 9:1 wt/wt) through combined small-angle neutron scattering (SANS) and molecular dynamics (MD) simulations. Lignin samples obtained at 100 °C (L100) and 120 °C (L120) differed in β–O–4 content, hydroxyl distribution, and S/G ratio, enabling direct assessment of how molecular composition governs solvation and aggregation. SANS showed that L120 formed rigid and elongated cylindrical aggregates at 25 °C that transitioned to more flexible spheroidal structures by 50 °C and remained stable up to 80 °C, whereas L100 adopted globular aggregates that progressively collapsed with increasing temperature. MD simulations reinforced these observations by showing that S-rich (L120-like) oligomers had larger radii of gyration, stronger solvent coordination driven by methoxy groups, and fewer lignin–lignin contacts. In contrast, G-rich (L100-like) oligomers displayed persistent aggregation and lower solubility. Collectively, these results reveal that increased aromatic methoxylation enhances lignin–solvent interactions and suppresses self-association, whereas reduced methoxylation and higher β–O–4 content promote persistent aggregation into colloid-like structures with restricted solvent penetration into the aggregate interior.

biorefinery pretreatment↗
DOE OSTI2025

Storage-Induced Collapse of Lignin Macromolecular Structure and Its Impacts on the Biorefinery

Lignin plays a vital role in the economics of biorefineries, serving as a source of process energy and a feedstock for sustainable fuels and chemical production. While understanding lignin’s chemical composition is crucial, emerging evidence suggests that a more comprehensive understanding of its macromolecular structure is critical to explaining its complex behavior in the biorefinery. This study investigated the partial collapse of the lignin network in corn stover feedstock after harvest and storage as a result of the microbial digestion of hemicellulose. Fluorescence microscopy was used to detect the collapse of lignin in terms of lignin’s inter-molecular interaction and the re-orientation of lignin’s chromophores, by the changes in lignin’s fluorescence lifetime, anisotropy, and the number of effective emitters. With minimal sample perturbation, our in-situ microscopic results revealed lignin's coil-globule transition phenomena, which was only previously predicted by molecular dynamics modeling extracted lignin in solvent. This collapse of lignin macromolecular structure was confirmed by results from NMR, IR, Raman, and powder X-ray diffraction. We also investigated the impact of this storage-induced collapse on the downstream biorefinery processes. Our study revealed that the two major approaches for lignin valorization in the lignin-first biorefinery model, namely monomer extraction and milled wood lignin extraction, were negatively impacted by the lignin collapse. As changes during storage are a source of feedstock variability, our study highlights the importance of understanding the effect of feedstock handling on biorefinery operations and economics.

09 BIOMASS FUELS↗
DOE OSTI2024

Nuclear Fuel and Pu Redox Studies from The Glenn T. Seaborg Institute at Idaho National Laboratory

The Glenn T. Seaborg Institute at Idaho National Laboratory (INL-GTSI) focuses on advancing fundamental research in the actinide sciences by providing unique opportunities to early career scientists and engineers to gain experience studying the actinide elements and their associated systems. The INL-GTSI is built from three focus areas that are based on the expertise and supporting infrastructure at INL and include solid state chemistry and physics, solution phase chemistry and physics, and forensic and isotope science. INL is the lead Laboratory for nuclear energy research and development in the U. S. and the research on nuclear fuels performed under the INL-GTSI gives good examples of solid state studies. Uranium-Molybdenum (U-Mo) alloys are leading fuel candidates for conversion of high performance research and test reactors to low-enriched fuels. During irradiation, generated fission gas accumulates into bubbles and self-organizes into a gas bubble superlattice (GBS) that effectively stores fission gases and inhibits fuel swelling. A study on the early self- organizing behavior of the GBS shows that not only grain boundaries but the interfaces between the U-Mo matrix and uranium carbide (UC) impurities are important to GBS formation.[1] In solution, understanding the complex redox behavior of plutonium in aqueous environments is critical for establishing optimized nuclear waste reprocessing solvent systems and storage tank environments. INL-GTSI researchers have produced an experimentally validated multi-scale model of the gamma radiation induced behavior of plutonium ions in concentrated aqueous HNO3 solutions.[2] Here, gamma radiation effected only minimal steady state changes in the redox distribution of the plutonium oxidation states. The redox cycling between Pu(IV) and Pu(III) is demonstrated to be mediated by the •OH/NO3• radical oxidation of Pu(III) and the H2O2/HNO3 driven reduction of Pu(IV). The INL-GTSI offers young researchers the unique chance to work directly with actinide bearing materials in a U. S. National Laboratory environment. Further topical areas of interest to the INL-GTSI include, but are not limited to, fundamental actinide properties, structure/property (electronic, magnetic, thermal) relations, actinide quantum criticality, f- electron interactions, electron correlations, computational studies, new phases, defect effects, interface interactions, isotope production and separation, forensic analytical chemistry, structure and dynamic properties of actinides in non-aqueous media, separations chemistry and kinetics for advanced nuclear fuel cycles, radiation effects, and innovative and advanced ligand design for complexation of the actinides.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Janthinobacter additions reduce rotifer grazing of microalga Microchloropsis salina in biotically complex communities

Grazing and parasitism in algal production systems are significant causes of crop loss. Biological control of algal ponds, such as application of protective bacteria, represents a promising alternative to current mitigation strategies. The major barriers to probiotic methods are the lack of identified protective bacteria and uncertainty of scale-up effects, including potential negative interactions with the resident algal microbiome. Here, we report that application of Janthinobacter lividum affords robust protection against rotifer (Brachionus plicatilis) grazing on Microchloropsis salina. Protection was observed at laboratory scale from live bacteria and solvent extract additions as well as in biologically complex communities from bacterial additions to outdoor mesocosms. J. lividum persisted in outdoor communities for at least 3 days following addition, and did not lead to selective exclusion of specific taxa in the resident microbiome. These results demonstrate that J. lividum can provide protection against grazers in these diverse communities, without severe effects on the resident microbiome. Our results suggest that J. lividum is a promising treatment to mitigate algal crop losses due to pests. Additionally, the study highlights the importance of an ecologically-informed approach to algal crop management that will aid future applications in the biological control of algal ponds.

09 BIOMASS FUELS↗
DOE OSTI2025

An Application of Molecular Recognition for the Efficient Removal of Cesium from Hanford Nuclear Waste by Modular Solvent Extraction

In this work, experimental results leading to flowsheet design are presented showing how a calixarene-crown ether based solvent-extraction process can meet the challenge of cesium removal from nuclear tank wastes stored at the US Department of Energy Hanford site. Cleanup of legacy Cold War nuclear waste stored in underground tanks represents one of the greatest environmental challenges facing the US Department of Energy in terms of risk, cost, and effectiveness of applicable science and technology. Planning for the cleanup at the Hanford Site calls for the removal of the radioactive fission product 137Cs from its alkaline salt waste, including the use of modular processes that can be deployed near the tank farms. To meet the resulting need for extremely high selectivity, the Next-Generation Caustic-Side Solvent Extraction (NG-CSSX) process employing a calix[4]arene-crown ether in modified kerosene has been adapted to remove sub-millimolar cesium in competition with molar sodium and potassium in a high-nitrate alkaline matrix. Potassium loading in the solvent was determined in extraction, scrubbing, and stripping, leading to an empirical model closely approximating cesium distribution ratios for a variety of Hanford waste types. Process chemistry has been developed based on this molecular-recognition approach, focusing on the competitive effect of potassium loading and the mitigating process modifications needed, including extending the scrub section. The result is a modular flowsheet design that can achieve cesium decontamination factors well in excess of 15,000 even for the worst-case Hanford waste.

Williams, Neil [ORNL] (ORCID:000000023159226X)↗
DOE OSTI2026

Temperature‐Dependent Crystallization in Two‐Step Perovskite Deposition Revealed by In Situ GIWAXS and Machine Learning‐Guided Analysis

The performance and stability of perovskite solar cells are strongly governed by the crystallization behavior of their active layer. In two-step sequential deposition, early-stage film formation plays a decisive role in determining final phase purity and device quality. Guided by a data-driven analysis of nearly 39 000 devices in the FAIR perovskite database, we identified solvent-mediated quenching and thermal processing as key variables affecting power conversion efficiency (PCE), particularly in two-step fabrication. Here, to investigate these effects in real time, we designed and implemented a custom-built, temperature-controlled spin-coating system, enabling precise thermal modulation during precursor deposition. Using this platform, we performed in situ GIWAXS measurements to study the crystallization dynamics of FA 0.5 MA 0.5 PbI 3 films over a temperature range of 30°C–90°C. Our results reveal a non-monotonic relationship between spin-coating temperature and α-phase formation, governed by the interplay between precursor interdiffusion, PbI 2 crystallinity, and δ-phase suppression. The custom thermal control enabled us to isolate and quantify these competing effects during the earliest stages of film formation, providing mechanistic insight into how spin-coating temperature governs both phase purity and kinetic pathways in two-step perovskite systems. Temperature-dependent SEM and photovoltaic device measurements further demonstrate that early-stage crystallization pathways directly translate into differences in morphology, charge-transport continuity, and device performance. These findings inform targeted strategies for optimizing deposition protocols to balance rapid nucleation, phase stability, and device performance.

Saadawy, Ahmed [King Fahd University of Petroleum ↗
DOE OSTI2023

Phase-field modeling of dislocation–interstitial interactions

The mechanical behavior of body-centered cubic (BCC) materials can be dramatically affected by the presence of interstitial solute atoms. Here we present a new phase-field dislocation dynamics formulation to include the diffusion of interstitials. Short-range interactions are accounted for by a concentration-dependent lattice energy, and long-range interactions are accounted for by modifications to the elastic energy. The interstitial diffusion law introduces gradients that require methods for minimizing Gibbs oscillations, which is done via a modified Green’s function. The formulation is general to any solute-solvent system and is applied here to Nb-O as a model system, whose interstitial parameters are obtained from ab initio calculations. The effect of O on the core structures of Nb edge and screw dislocations is calculated. The diffusion of O to form interstitial atmospheres around dislocation cores is simulated, as well as the critical stresses required for dislocations to break away or cross slip from these atmospheres. Future applications of the method to simulate complex interstitial embrittlement mechanisms are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

One-pot hydrodeoxygenation (HDO) of lignin monomers to C9 hydrocarbons co-catalysed by Ru/C and Nb 2 O 5

A physical mixture of Ru/C and Nb 2 O 5 is an effective catalyst for upgrading lignin monomers under low H 2 pressure at 250 °C to a clean cut of hydrocarbon liquid fuels. The reaction solvent is water with a small amount of methanol additive. Hydrodeoxygenation (HDO) was evaluated using dihydroeugenol (DHE) as an exemplary lignin monomer model. Under optimized conditions, 100% conversion of DHE and very high selectivity to propyl cyclohexane (C9 hydrocarbon) was achieved. Nb 2 O 5 was prepared at a low temperature (450 °C) and was shown to contain acid sites that enhance the production of fully deoxygenated products. The methanol additive serves as a hydrogen source for the Ru/C catalysed reduction of the aromatic ring. In addition, when a substrate mixture of DHE, isoeugenol and 4-allylsyringol simulating lignin products was employed, 100% conversion to propyl cyclohexane (76%) and propyl benzene (24%) was observed, thereby suggesting the general applicability of this catalyst system for funneling lignin monomers into a clean cut of hydrocarbon liquid fuels. This study sheds light on the function of each catalyst component and provides a simple and green utilization of biomass monomers as a feedstock for renewable hydrocarbon fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Description of reaction and vibrational energetics of CO 2 –NH 3 interaction using quantum computing algorithms

CO 2 capture is critical to solving global warming. Amine-based solvents are extensively used to chemically absorb CO 2 . Thus, it is crucial to study the chemical absorption of CO 2 by amine-based solvents to better understand and optimize CO 2 capture processes. Here, we use quantum computing algorithms to quantify molecular vibrational energies and reaction pathways between CO 2 and a simplified amine-based solvent model—NH 3 . Molecular vibrational properties are important to understanding kinetics of reactions. However, the molecule size correlates with the strength of anharmonicity effect on vibrational properties, which can be challenging to address using classical computing. Quantum computing can help enhance molecular vibrational calculations by including anharmonicity. We implement a variational quantum eigensolver (VQE) algorithm in a quantum simulator to calculate ground state vibrational energies of reactants and products of the CO 2 and NH 3 reaction. The VQE calculations yield ground vibrational energies of CO 2 and NH 3 with similar accuracy to classical computing. In the presence of hardware noise, Compact Heuristic for Chemistry (CHC) ansatz with shallower circuit depth performs better than Unitary Vibrational Coupled Cluster. The “Zero Noise Extrapolation” error-mitigation approach in combination with CHC ansatz improves the vibrational calculation accuracy. Excited vibrational states are accessed with quantum equation of motion method for CO 2 and NH 3 . Using quantum Hartree–Fock (HF) embedding algorithm to calculate electronic energies, the corresponding reaction profile compares favorably with Coupled Cluster Singles and Doubles while being more accurate than HF. Our research showcases quantum computing applications in the study of CO 2 capture reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Tunable structural color of bottlebrush block copolymers through direct-write 3D printing from solution

Additive manufacturing of functional materials is limited by control of microstructure and assembly at the nanoscale. In this work, we integrate nonequilibrium self-assembly with direct-write three-dimensional (3D) printing to prepare bottlebrush block copolymer (BBCP) photonic crystals (PCs) with tunable structure color. After varying deposition conditions during printing of a single ink solution, peak reflected wavelength for BBCP PCs span a range of 403 to 626 nm (blue to red), corresponding to an estimated change in d-spacing of >70 nm (Bragg- Snell equation). Physical characterization confirms that these vivid optical effects are underpinned by tuning of lamellar domain spacing, which we attribute to modulation of polymer conformation. Using in situ optical microscopy and solvent-vapor annealing, we identify kinetic trapping of metastable microstructures during printing as the mechanism for domain size control. More generally, we present a robust processing scheme with potential for on-the-fly property tuning of a variety of functional materials.

36 MATERIALS SCIENCE↗
NASA NTRS1974

Salt-dependent properties of proteins from extremely halophilic bacteria

Based on information concerning the interaction of salts and macromolecules the literature of the enzymes of halophilic bacteria and their constituents is examined. Although in halophilic systems the salt requirement of enzyme activity is variable the enzymes investigated show a time-dependent inactivation at lower salt concentrations especially in the absence of salt. The studies described show that in some halophilic systems the effect of salt may be restricted to a small region on the protein molecule. The concept of the hydrophobic bond to consider certain solvent-dependent phenomena is introduced. It is shown that some halophilic enzymes are unable to maintain their structure without the involvement of hydrophobic interactions that are usually not supported by water. A table lists indices of hydrophobicity and polarity for various halophilic and nonhalophilic proteins.

Lanyi, J. K.↗
NASA NTRS1981

Physical aging of linear and network epoxy resins

Network and linear epoxy resins principally based on the diglycidyl ether of bisphenol-A and its oligomers are prepared and studied using diamine and anhydride crosslinking agents. Rubber modified epoxies and a carbon fiber reinforced composite are also investigated. All materials display time-dependent changes when stored at temperatures below the glass transition temperature after quenching (sub-T/g/ annealing). Solvent sorption experiments initiated after different sub-T(g) annealing times demonstrate that the rate of solvent uptake can be indirectly related to the free volume of the epoxy resins. Residual thermal stresses and water are found to have little effect on the physical aging process, which affects the sub-T(g) properties of uniaxial carbon fiber reinforced epoxy material. Finally, the importance of the recovery phenomenon which affects the durability of epoxy glasses is considered.

Kong, E. S.-W.↗
NASA NTRS1999

Growth of Solid Solution Single Crystals

The objective of the study is to establish the effects of processing semiconducting, solid solution, single crystals in a microgravity environment on the metallurgical, compositional, electrical, and optical characteristics of the crystals. The alloy system being investigated is the solid solution semiconductor Hg(1-x)Cd(x)Te, with x-values appropriate for infrared detector applications in the 8 to 14 mm wavelength region. Both melt and Te-solvent growth are being performed. The study consists of an extensive ground-based experimental and theoretical research effort followed by flight experimentation where appropriate. The ground-based portion of the investigation also includes the evaluation of the relative effectiveness of stabilizing techniques, such as applied magnetic fields, for suppressing convective flow during the melt growth of the crystals.

Lehoczky, Sandor L.↗
DOE OSTI2025

Dual aggregation steering in bulk-heterojunction via solvent engineering toward efficient and stable binary organic solar cells

In high-performance organic solar cells (OSCs), efficient charge transport hinges on a well-optimized morphology of the photoactive layer, which depends critically on controlled aggregation and favorable interactions between donor and acceptor materials. In this work, we introduce a cascade solvent system comprising high-boiling-point ethylbenzene (EB) and low-boiling-point chloroform (CF) to finely tune the aggregation behavior of the D18 donor and L8-BO acceptor. The incorporation of EB not only promotes the H-aggregation of D18 and the J-aggregation of L8-BO but also facilitates the formation of ideal nanoscale phase separation, thereby suppressing bimolecular recombination. As a result, devices processed with the EB/CF solvent blend achieve a best power conversion efficiency (PCE) of 19.6 % and enhanced operational stability, outperforming those fabricated with pure CF (17.1 %). In conclusion, this study offers a reliable and effective strategy for optimizing donor and acceptor aggregation, providing a viable pathway toward higher-performance OSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Efficient simulation of optical spectra via machine learning and physical decomposition of environmental effects

Simulations of optical spectra can provide key insights to aid experimental interpretation of electronic excitation phenomena. For chromophores in the condensed phase, these spectra, which incorporate the coupling between electronic excitation and molecular and solvent nuclear motions, can be simulated using excitation energies obtained from molecular dynamics simulations of the chromophore and solvent. Here, we present a hybrid scheme that exploits machine learning and physically informed spectral densities to show that as few as 25 ground and excited state energetic gradient calculations can be used to construct models that accurately predict environment-influenced vibronic coupling in optical spectra. We demonstrate our approach for the green fluorescent protein chromophore in water and the cresyl violet chromophore in methanol. We show that our hybrid approach, employing a machine learning model for the high-frequency spectral density and an ab initio parameterized Debye spectral density for the low-frequency, results in a systematic improvement of the optical absorption lineshape, leading to a simple machine learning scheme that can be used for the simulation of spectral densities and optical spectra.

Snider, Andrew [Univ. of California, Merced, CA (U↗
DOE OSTI2025

Rapid Sensing to Facilitate Purification of Rare Earth Element-Containing Process Streams Produced Through Membrane-Assisted Solvent Extraction

The development of an economically competitive domestic supply of rare earth elements and yttrium (REY) is necessary for our nation’s economic growth and national security. The achievement of a secure domestic supply of REY requires not only the development of effective processes for recovery of REY from naturally occurring materials and/or recycled products, but also the development of downstream processes for the ultimate production of high-REY content solids. An impediment to the development of such processes is the scarcity of analytical methods that provide rapid determination of the process stream compositions. In this work, a membrane-based extraction process was used to selectively recover REYs from a dilute solution in the presence of much higher concentrations of Ca and Al. In tandem, the use of a portable spectrometer equipped with an immobilized zinc adeninate benzene tricarboxylate metal-organic framework sensing material makes possible the rapid detection of the presence of ppm concentrations of Tb and Eu in both weakly acidic and strongly acidic process streams within minutes. A solvent extraction processing time of 15-60 min maximized REY selectivity over gangue ions while achieving up to 80% REY and minimal gangue ion recovery. Taken together, these experiments highlight not only an innovative method for REY purification but also the importance of inexpensive, portable characterization methods for near real-time analysis of REY content.

Membrane-assisted solvent extraction↗