SEARCH · Engineering Papers

Results for “Soil”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Accumulation of Soil Microbial Necromass Controlled by Microbe–Mineral Interactions

Soil organic matter (SOM) is a key reservoir for global carbon (C), supporting soil fertility and influencing greenhouse gas emissions. Microbial residues, composed of dead cells and cellular fragments, are major contributors to SOM formation. Yet, mechanisms by which minerals enhance the accumulation of microbial residues remain poorly understood. Here, we used 13 C-labeled glucose in a year-long incubation to trace microbial residue in sandy and silty soils. Across both soils, approximately 89% of retained microbial 13 C was recovered in the fine (<53 μm) mineral-associated organic matter (MAOM) pool. Within this pool, the light MAOM fraction, enriched in poorly crystalline Fe minerals, held 4.3 times more 13 C than the heavy, phyllosilicate-dominated MAOM fraction, despite accounting for only 17.2% of the total MAOM mass and 12.3% of the total soil mass. Along with 13 C enrichment, the light MAOM fraction showed greater abundance of N-containing groups, e.g., (amides and amino groups), indicative of microbial-derived compounds like proteins and amino sugars. Fe oxides in light MAOM from both soils were spatially dispersed. Microbial residue accumulation was greater in finer-textured silty soil. These findings demonstrate that mineral composition and texture jointly regulate microbial necromass accrual, highlighting light MAOM as a key pool for enhancing soil C storage.

13C isotope labeling↗

DOE OSTI2024

Reparameterizing Litter Decomposition Using a Simplified Monte Carlo Method Improves Litter Decay Simulated by a Microbial Model and Alters Bioenergy Soil Carbon Estimates

Litter decomposition determines soil organic matter (SOM) formation and plant-available nutrient cycles. Therefore, accurate model representation of litter decomposition is critical to improving soil carbon (C) projections of bioenergy feedstocks. Soil C models that simulate microbial physiology (i.e., microbial models) are new to bioenergy agriculture, and their parameterization is often based on small datasets or manual calibration to reach benchmarks. Here, we reparameterized litter decomposition in a microbial soil C model (CORPSE - Carbon, Organisms, Rhizosphere, and Protection in the Soil Environment) using the continental-scale Long-term Inter-site Decomposition Experiment Team (LIDET) dataset which documents decomposition across a range of litter qualities over a decade. Here, we conducted a simplified Monte Carlo simulation that constrained parameter values to reduce computational costs. The LIDET-derived parameters improved modeled C and nitrogen (N) remaining, decomposition rates, and litter mean residence times as compared to Baseline parameters. We applied the LIDET litter decomposition parameters to a microbial bioenergy model (Fixation and Uptake of Nitrogen – Bioenergy Carbon, Rhizosphere, Organisms, and Protection) to examine soil C estimates generated by Baseline and LIDET parameters. LIDET parameters increased estimated soil C in bioenergy feedstocks, with even greater increases under elevated plant inputs (i.e., by increasing residue, N fertilization). This was due to the integrated effects of plant litter quantity, quality, and agricultural practices (tillage, fertilization). Collectively, we developed a simple framework for using large-scale datasets to inform the parameterization of microbial models that impacts projections of soil C for bioenergy feedstocks.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Synthetic soils for ecological and synthetic biology applications

Soils are heterogeneous and dynamic systems characterized by complex physical, chemical, and biological interactions. Understanding these interactions is critical, as they influence plant productivity, global biogeochemical cycles, and ecosystem resilience. While ecologists have long studied soils in field, greenhouse, and laboratory settings, their complexity and heterogeneity make it challenging to pinpoint key properties driving biological processes and derive mechanistic insights. Advancements in synthetic biology, which seeks to engineer and control biological processes in soils, have increased the demand for standardized and controllable experimental platforms. These platforms, referred to here as ‘synthetic soils’, are systems designed to reproduce selected physicochemical characteristics of natural soils in a simplified and defined format, allowing scientists to systematically change soil physicochemical properties (i.e. texture, mineralogy, pH) to study how biological components (i.e. microbes, plants, soil fauna, etc.) respond to, modify, or interact within these controlled environments. This review explores existing synthetic soils, their advantages, limitations, and applications in ecology and synthetic biology, and discusses potential directions for their future development.

artificial soils↗

DOE OSTI2026

Linking Plant and Microbial Traits to Soil Carbon for Reliable and Resilient Bioenergy Systems

Bioenergy systems in the United States offer a dual opportunity to supply renewable feedstocks while enhancing ecosystem services such as hydrologic regulation, erosion control, and soil carbon (C) storage. National assessments highlight the potential to grow perennial energy crops to improve soil function and ecosystem resilience. Realizing this potential requires understanding the ecological mechanisms that govern how C is added, transformed, and stabilized in soils. Plant traits determine the quantity, depth, and chemistry of organic inputs, while microbial processes—including carbon use efficiency, necromass formation, and trophic interactions—mediate their transformation and partitioning among soil carbon pools. These biological pathways are shaped by soil physical and chemical properties, including aggregation, texture, and mineralogy, and by environmental drivers such as temperature, moisture, and disturbance, leading to context-dependent outcomes across landscapes. Management practices that diversify feedstocks, minimize disturbance, and maintain soil cover can promote both biomass production and C retention, while microbial amendments and rhizosphere engineering offer emerging, but often context-dependent, tools to optimize plant–microbe interactions. Trade-offs between biomass yield and soil carbon storage may arise when systems favor rapid aboveground productivity at the expense of belowground inputs and microbial processing, underscoring the importance of trait combinations that support both functions. Advances in monitoring, reporting, and verification—spanning precision agriculture, remote sensing, and biosensing—are improving predictive capacity through microbial-explicit process models and model–experiment (ModEx) frameworks. By connecting soil, plant, and microbial processes with advances in modeling and biosensing, this review outlines research priorities focused on trait-based parameterization and ModEx integration. These priorities will support the design of bioenergy systems that are both reliable and resilient, enhancing renewable energy production and ecosystem sustainability.

bioenergy systems↗

DOE OSTI2026

A tale of two extremes: Temperature sensitivity of carbon loss from cool and hot soils

Soils represent the largest terrestrial carbon (C) pool, and the flux of carbon dioxide (CO 2 ) from soils to the atmosphere is ~ 6-10 times more than anthropogenic emissions. Understanding responses of soil CO 2 emissions to warming is crucial for evaluating feedback to ongoing environmental changes. The relationship between microbial respiration and temperature is typically modeled using a Q 10 function. Generally, observations of the apparent Q 10 of soil respiration are higher for cold vs. warm ecosystems, reflecting expected biophysical controls of Arrhenius kinetics. However, results from two field warming experiments in the tropics contradict this expectation, both observing extraordinarily high soil respiration responses to in situ warming. Our overall objective for the proposed work is to reduce uncertainty in temperature sensitivity of soil C loss by systematically synthesizing underlying mechanisms related to soil C turnover and stabilization. We are evaluating the temperature sensitivity of soil respiration in ecosystems across temperature extremes (e.g., arctic/boreal and tropical systems) by integrating data collected from field warming experiments with machine learning and biogeochemical models.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2023

Seasonal Soil Freeze/Thaw Variability Across North America via Ensemble Land Surface Modeling

Land surface modeling provides the opportunity to investigate winter soil processes such as soil freezing and thawing over large domains. However, the variability in simulated winter soil characteristics among land surface models and forcing datasets is not well understood. In this study, a nine-member ensemble was employed to characterize the spatial and inter-annual variability of three winter soil characteristics, annual number of frozen days, annual minimum temperature and annual number of freeze-thaw cycles over North America during the water years 2010–2016. The ensemble, including three land surface model (JULES, Noah2.7.1 and Noah-MP) and three forcing datasets (ECMWF, GDAS and MERRA2), was developed through the Snow Ensemble Uncertainty Project (SEUP). In many regions, there was remarkably good agreement across the ensemble for the winter soil temperatures. However, the variability among the ensemble's annual number of frozen days, as quantified with standard deviation, exceeded 150 days at the northern Pacific coastline. While the differences among the ensemble members' annual minimum temperature were typically <3 °C, the differences exceeded 6 °C north of 50°N. The ensemble members generally agreed within one to three freeze-thaw cycles in mid latitude regions, Alaska, and the south and west coasts of the USA. High variability among the ensemble, more than six freeze-thaw cycles, occurred in the Great Plains, northern Pacific coastline, and along the Appalachian Mountains. Differences in winter soil temperature characteristics were more apparent among the LSMs rather than the meteorological forcing datasets. Except for maritime regions, the Noah2.7.1 members had the fewest annual number of frozen days and the least number of freeze-thaw cycles. Noah2.7.1 also had the coldest annual minimum temperatures except for ephemeral regions. Comparisons between in-situ observations and the SEUP estimates of winter soil characteristics revealed that the modeled frozen period was much longer than observed, that the modeled annual minimum temperatures were much colder than observed, and the modeled freeze-thaw cycles occurred more frequently than observed. Excluding the high latitude sites, the observed frozen period is less than two months with the minimum temperature above − 5 °C at most of the studied sites, while the ensemble members simulated, on average, a four month frozen period with − 10 °C minimum temperature. Errors in capturing snow during the accumulation period appear to impact differences in modeled versus observed soil temperature throughout the entire winter.

Soil freeze/thaw↗

DOE OSTI2020

Soil Chamber Fluxes (CO2 and CH4) across a catena in the Luquillo Experimental Forest, Puerto Rico

Wet tropical forest soils contribute significantly to global emissions of carbon dioxide (CO2) and methane (CH4). Landscape topography largely influences the rate of CO2 versus CH4 emissions from wet tropical forest soils. This dataset contains soil chamber fluxes of CO2 and CH4 from 2016 (April 5 through July 18) across a catena in the Luquillo Experimental Forest, Puerto Rico. Soil CO2 fluxes followed the trend of ridge>slope>valley. However, soil CH4 emissions followed the opposite trend, where valley soils served as the major source of CH4 emissions. This dataset can improve our understanding of greenhouse gas (CO2 and CH4) emissions associated with complex topography in wet tropical forest soils.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Trace Metal Content and Speciation, Water and Soil Chemistry, and Methane Production for a Wetland in Missouri (September 2015) and in Florida (January 2016)

Data is associated with a manuscript in preparation for submission to explore whether low trace metal availability inhibits methane production in freshwater wetland soils. Reported data are from two field sites, one in Missouri and the second in Florida (see location data). At each site, surface water compositions and properties and soil compositions are reported. Trace metal availability is assessed via sequential chemical extractions, Ni K-edge X-ray absorption near edge structure (XANES) spectroscopy, and X-ray microfluorescence imaging. Soil mineralogy is determined via powder X-ray diffraction. Multi-energy X-ray microfluorescence imaging as well as bulk and microscale S K-edge XANES spectra assess sulfur speciation in the soils. This package also reports data from trace metal amendment experiments, specifically methane (CH4) production versus time in soil incubations, the dissolved trace metal concentrations in these incubations, and the Ni K-edge XANES and extended X-ray absorption fine structure (EXAFS) spectra of soils to which increasing concentrations of Ni were added. A final version of this package will be published upon acceptance of the associated manuscript.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Effects of Lead and Arsenic in Soils from Former Orchards on Growth of Three Plant Species

Abstract Historical use of lead arsenate as a pesticide in former orchards of eastern Washington State (USA) has resulted in legacy lead (Pb) and arsenic (As) soil contamination. However, the impacts on plant growth in soils with residual Pb and As contamination have not yet been quantified. To this end, a comparative study of plant growth impacts was performed for native bluegrass ( Poa secunda ), invasive cheatgrass ( Bromus tectorum ), and buttercrunch lettuce ( Lactuca sativa ). Using standard plant growth protocols, germination frequency and biomass growth were measured over a wide range of Pb and arsenate concentrations, with maximum concentrations of 3400 and 790 mg kg −1 for Pb and As, respectively. Results indicated that only the biomass growth for all species decreased in soils with the highest concentrations of Pb and As in the soil, with no impacts on soils with lower residual Pb and arsenate concentrations. No impact on percentage of germination was observed at any soil concentration. These results can be used to determine site‐specific soil screening levels for use in ecological risk assessments for Pb and arsenate in soils. Environ Toxicol Chem 2022;41:1459–1465. © 2022 Battelle Memorial Institute. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

An in-depth field validation of “DUSST”: A novel low-maintenance soiling measurement device

This study presents indoor and field validation results for two versions of the “DUSST” optical soiling sensor, intended to be a low-cost and low-maintenance device for measuring photovoltaic soiling losses. Indoor testing covers irradiance calibration and temperature dependencies, which are necessary to achieve high accuracy, low uncertainty field measurements. Field testing includes an array of different environments including Saudi Arabia, California, Utah, and Colorado. DUSST versions include a configuration with a 530-nm light emitting diode (LED) (discussed in previous work) and a unit with seven white LEDs and a polycarbonate collimating optic. The new design increases light intensity fivefold and demonstrates a single linear calibration coefficient is effective to measure soiling losses as high as 75%. Field data from Utah and California demonstrate that daily soiling loss measurements and soiling rate calculations closely match both reference cell and full-size module measurements of soiling losses and soiling rates. Corrective methods employed on the Utah DUSST sensor suggest that it is possible to achieve measurement errors as low as ±0.1% at two standard deviations. Field data from both Colorado and Saudi Arabia demonstrate that LED lens soiling can occur and that further design optimizations are needed. The lesson learned from all the field deployment locations suggests directions for future design improvements.

14 SOLAR ENERGY↗

DOE OSTI2026

Extracellular DNA Alters Detection of Subtle Bacterial Responses to Soil Rewetting

Microbial communities are often characterized using DNA-based sequencing, but these approaches also capture extracellular DNA (exDNA) released from dead cells, potentially altering inference about microbial responses to environmental change. This may be especially important during pulse disturbances, such as soil drying–rewetting, which can increase microbial mortality and transient necromass pools. We assessed whether exDNA altered inference about bacterial responses to drying–rewetting (an 80 mm simulated rainfall event following a 28-day drought) in conventionally tilled corn and perennial switchgrass soils. We quantified bacterial abundance (16 S rRNA gene copies), alpha diversity, and community composition in paired soil samples with exDNA included (+ exDNA) and in samples treated with propidium monoazide (PMAxx) to reduce amplification of exDNA (− exDNA). At our level of replication (n = 4), PMAxx treatment did not significantly alter overall temporal response patterns (i.e., no significant main effect of DNA treatment or DNA × time interaction). However, PMAxx treatment increased sensitivity to detect some pairwise temporal changes in bacterial abundance and community composition in corn soils following rewetting. exDNA pools were proportionally highest immediately after rewetting in corn soils, suggesting transient extracellular DNA may contribute to masking during disturbance recovery. In contrast, PMAxx treatment had comparatively small effects in switchgrass soils, which exhibited weaker temporal responses overall. Inclusion of exDNA also changed which taxa appeared most responsive to rewetting. Together, our results suggest that exDNA does not uniformly bias soil microbial inference, but may reduce detectability of subtle disturbance-driven shifts in certain soils. Future studies should advance knowledge of microbial turnover and necromass dynamics, particularly using multiple complementary methods, to help predict when exDNA is most likely to influence ecological inference.

drying-rewetting↗

DOE OSTI2021

Development of energetic and enzymatic limitations on microbial carbon cycling in soils

Soil organic carbon (SOC) constitutes an important reservoir in the global carbon cycle that is vulnerable to transformation and loss from land use and climate change. Anoxic conditions protect SOC from microbial degradation through limiting the energetics of respiration and inhibiting extracellular oxidative enzymes. Given growing evidence of prevalent anaerobic microsites in upland soils, we designed an experiment testing the development of dissolved organic carbon (DOC) signatures of energetic and enzymatic limitations on microbial carbon utilization across simulated soil aggregates or peds. Reactors comprised a soil column “aggregate” underlying an advective “macropore” channel. Soils received downward diffusive inputs of aerated porewater media with added nitrate, sulfate, or no amendment—where native ferrihydrite served as dominant anaerobic terminal electron acceptor (TEA). After 40 days, added nitrate resulted in highest bulk respiration and DOC production while sulfate did not differ from the control. Nominal oxidation state of carbon (NOSC) was higher (more favorable) with added TEAs at soil surfaces and decreased with depth, while NOSC in the non-amended soil remained lower and constant with depth. DOC generally increased with depth, which along with decreasing NOSC values indicates joint electron-donor and acceptor control over respiration energetics. Of all organic compound classes, only the relative abundance of phenolics increased between 0 and 0.5 cm depth, which aligns with the oxic-anoxic transition and suggests oxidative enzyme inhibition. Furthermore, our results suggest that oxygen limitation within upland soil aggregates may preserve SOC via both energetic and enzymatic C protection mechanisms, which are vulnerable upon exposure to oxygen.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Soil management legacy interacts with wheat genotype to determine access to organic N in a dryland system

Organic nutrient management through the application of compost and/or cover crops provides mineralizable sources of nutrients for plants while often building soil organic matter (SOM) and various aspects of soil health. Variability in nutrient acquisition strategies between crop genotypes may confer advantages under different soil health contexts and could be important for crop selection and breeding, but crop response under field conditions remains unexplored. We investigated the ability of different genotypes of winter wheat (Triticum aestivum L.) to access nitrogen (N) from newly added cover crop residues in two soils with contrasting levels of SOM and biological activity. We planted three previously characterized wheat genotypes in a long-term dryland compost amendment field trial: 1) Byrd (modern, deep roots, low exudation), 2) Cheyenne (historic, drought susceptible, intermediate exudation), and 3) Snowmass (modern, drought-susceptible, high exudation). 15 N-labelled cover crop residue was added to each plot and traced into wheat tissue. In the low SOM soil, the high exudate genotype Snowmass and historic genotype Cheyenne took up the most residue-derived N (6.4–8.1 kg N ha −1 ) compared to the low-exudate genotype Byrd (4.4 kg N ha −1 ), suggesting a strong exudate effect in the more carbon-limited soil. However, in the high SOM soil, the low-exudate, deep rooted genotype, Byrd, took up the most residue N (4.6 kg N ha −1 vs. 2.8 and 3.3 hg N ha −1 for Cheyenne and Snowmass, respectively), which indicated higher native N cycling activities and greater importance of drought resistance. Enzyme activity, inorganic N, and microbial communities were not influenced by genotype, though did show strong effects of compost application legacy. Furthermore, our results show that belowground allocation strategies that favor microbial stimulation may be less successful under water limitation, especially when high native SOM and biological activity can support mineralization of residue N without added investment in root inputs. Increased soil health through SOM-building management likely enhances nutrient cycling, and may better support root strategies that invest less in microbial stimulation in favor of other limiting resources.

Compost↗

DOE OSTI2020

Microbial potentiometric sensor array measurements in unsaturated soils

The overarching goal of this study is to demonstrate a novel technology for monitoring changes in electrical potential of unsaturated soils using biofilm-populated electrodes. The novelty of the study stems from the fact that it demonstrates a method for measuring open-circuit potentials (OCP) in environments without the presence of an electrolyte solution. This study also reveals that using a biofilm-populated electrode as a reference in stable environments could successfully be employed to assess and monitor the electrochemical potential generated by plants and microorganisms. The findings imply that long-term (months to years) and real-time measurements of the open-circuit potential in unsaturated soils are possible. Because MPS arrays can directly measure open-circuit potential from the biofilm, the challenges related to locally induced electrochemical changes caused by microorganisms in the soil to achieve optimum physiological levels are eliminated. The simplicity of the technology, which allows for multiple indicator electrodes to be referenced against an “internal” reference electrode, enables spatial-temporal monitoring of the changes in the soil and the generation of 2D- or 3D-signal patterns. Once a signal pattern, generated by an array of sensors, develops (usually after 30 to 90 days), it does not significantly change unless the soil is exposed to external stimuli. The observed OCP phenomena, however, suggests that the change in OCP signal is independent of changes in soil conductivity resulting from the addition of water. In brief, findings suggest that the proposed technology can enable multidimensional profiling and long-term monitoring of changes occurring in unsaturated soils without direct implications of presence of water. The changes in the 2D or 3-D signal patterns, however, can be correlated to other important parameters that characterize soil health.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Beneath the surface: Unsolved questions in soil virus ecology

Soil virus ecology is an exciting but still nascent field of research in soil microbiology. While there has been a recent surge in soil virus research studies, many fundamental questions remain unanswered, and a range of technical and bioinformatic challenges need to be overcome. In this perspective article, we present a series of key questions that highlight fruitful research areas for ongoing and future efforts. These include describing the challenges involved in understanding soil viral abundance and activity, spatiotemporal dynamics, life strategy prevalence, virus-mediated biogeochemical impacts, viral protein function, host prediction, and soil RNA virus discovery. In the near term, combining approaches (e.g., cultivation-based, meta-omics, biogeochemical, experimental, and bioinformatic) will be key to assessing the ecological and biogeochemical impacts of soil viruses from the microscopic to the field and global scales. Still, we stress that results must be tempered by current methodological limitations and highlight knowledge gaps that are most pressing to fill via new methods or measurements, such as the prevalence of different viral replication strategies across soils, the fate of microbial necromass carbon after viral lysis, the frequency of virus-host encounters that do not lead to successful infections yet could be bioinformatically mistaken as infections, and the diversity and ecological impacts of RNA viruses in soil.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

A polarimetry-based field-deployable non-interruptive mirror soiling detection method

The soiling level of heliostat mirrors in Concentrated Solar Power (CSP) fields is one of the key factors that significantly influences optical efficiency. State-of-the-art methods of monitoring heliostats soiling levels still face various challenges, including slow speed, labor-intensive operations, resolution and accuracy constraints or interruptions to solar field operations. Here, we present a rapid, cost-effective, and non-intrusive method for mirror soiling detection based on polarimetric imaging, referred to as Polarimetric Imaging-based Mirror Soiling (PIMS). The compact PIMS device is designed for integration with unmanned aerial vehicles (UAVs), enabling rapid, large-area assessments of heliostat mirrors for efficient soiling detection. Our method utilizes the correlation between the Degree of Linear Polarization (DoLP) and surface soiling level based on Mie scattering theory and Monte Carlo simulations. Field deployment of the PIMS method requires minimal device installation, and its UAV-based operation allows for soiling detection without interrupting plant activities. The PIMS method holds the potential for mirror soiling detection across various concentrated solar power (CSP) plants and can be further adapted for other types of solar fields, such as parabolic trough systems.

CSP Field↗

DOE OSTI2025

Wildfire Produces Transient Minerals: Speciation, Reactivity, and Fate of Iron and Manganese in Surface Soils Post Wildfire

Wildfire leads to the deposition of an ash layer at the land surface. This material typically has alkaline properties, abundant pyrogenic carbon, and elevated metal concentrations compared to surface soils. Here, we compare ash and surface soils collected three weeks and two years after the Glass Fire (St. Helena, California, USA) to determine how wildfire affects the speciation and reactivity of iron (Fe) and manganese (Mn), two micronutrients that influence many soil processes. Synchrotron-based analyses revealed that wildfire generated stable Fe oxides like maghemite (γ-Fe 2 O 3 ) and hematite (α-Fe 2 O 3 ) that likely derived from surface soil or mineral dust rather than the vegetation, and Mn oxides such as hausmannite (Mn 3 O 4 ) and bixbyite (Mn 2 O 3 ) that derived primarily from aboveground biomass. However, these pyrogenic minerals were absent in soils collected two years after the fire. Their loss from the soil surface may result from a combination of erosion, translocation to deeper soil layers, and chemical weathering. The latter hypothesis is supported by the enhanced mobilization of Fe and Mn from ash upon the addition of pyoverdine, a model biogenic ligand. The increased mobility of micronutrients from fire-derived minerals in ash in response to microbial and root exudation may facilitate postfire soil and vegetation recovery.

bixbyite↗

DOE OSTI2021

Impact of soil model complexity on the long-term thermal performance prediction of a new shallow bore ground heat exchanger

Shallow bore ground heat exchangers have been investigated in recent years because they have the potential to reduce the initial cost of the ground source heat pump system. Correctly modeling the transient heat transfer between the ground heat exchanger and the surrounding soil is essential for predicting a ground heat exchanger's performance. Simplification of the soil model could increase computation speed but sacrifice accuracy. This study investigates the impact of the soil model complexity on the annual performance prediction of a new shallow bore ground heat exchanger, the underground thermal battery (UTB). A simple 1D soil model and a more detailed 2D soil model were implemented, and they were validated against a 3D soil model. Overall, the resulting predictions of the UTB’s response from the 1D and 2D models to a given thermal load in different climates were compared. The results show that the root mean square differences between the hourly temperatures of the UTB during a year predicted using the two soil models range from 1.17°C to 3.39°C. As a result, the difference in the annual power consumption of the heat pump was between 0.7% and 3.4%. Furthermore, the dimensions of the UTB affected its performance, and a longer UTB was less sensitive to the soil models.

42 ENGINEERING↗