Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

The Load Capability of Piezoelectric Single Crystal Actuators

Piezoelectric lead magnesium niobate-lead titanate (PMN-PT) single crystal is one of the most promising materials for electromechanical device applications due to its high electrical field induced strain and high electromechanical coupling factor. PMN-PT single crystal-based multilayer stack actuators and multilayer stack-based flextensional actuators have exhibited high stroke and high displacement-voltage ratios. The actuation capabilities of these two actuators were evaluated using a newly developed method based upon a laser vibrometer system under various loading conditions. The measured displacements as a function of mechanical loads at different driving voltages indicate that the displacement response of the actuators is approximately constant under broad ranges of mechanical load. The load capabilities of these PMN-PT single crystal-based actuators and the advantages of the capability for applications will be discussed.

Xu, Tian-Bing↗

The mechanisms and temperature dependence of superlattice stacking fault formation in the single-crystal superalloy PWA 1480

The mechanism of the formation of superlattice staking faults in the single-crystal nickel-base superalloy PWA 1480 was investigated by observing deformation microstructures in the superalloy single crystals in the temperature range 20-1100 C. Results showed that, in addition to superlattice stacking faults observed after slow strain rate deformation at temperatures from 700 to 950 C, a high-density of superlattice staking faults formed after deformation at 200 C and below. The mechanisms of fault formation, which are different in the high- and the low-temperature regimes, are discussed.

Milligan, Walter W.↗

Thermoelectric properties of Bi 2 Sr 2 Co 2 O y thin films and single crystals

Bi 2 Sr 2 Co 2 O 9 exhibits a misfit-layered structure with good thermoelectric properties. We have investigated the thermoelectric properties of Bi 2 Sr 2 Co 2 O y in both thin-film and single-crystal forms. Among thin films grown at different temperatures, we find that both the in-plane thermoelectric power (Sab) and electrical resistivity (ρab) vary in an opposite trend, i.e., Sab is high when ρab is small. This results in large power factor (S ab 2 /ρab~5.5 μW/K 2 cm for the film grown at 700 °C), comparable to that for whiskers. For single crystals, the electrical resistivity shows metallic behavior in a large temperature range, but has higher magnitude than that of films grown at 675 °C and 700 °C. The annealing of single crystals under Ar atmosphere leads to even higher resistivity while S ab is improved. Lastly, we discuss the thermoelectric performance of this material considering both oxygen concentration and phase purity.

36 MATERIALS SCIENCE↗

Ultra-thin distributed Bragg reflectors via stacked single-crystal silicon nanomembranes

In this paper, we report ultra-thin distributed Bragg reflectors (DBRs) via stacked single-crystal silicon (Si) nanomembranes (NMs). Mesh hole-free single-crystal Si NMs were released from a Si-on-insulator substrate and transferred to quartz and Si substrates. Thermal oxidation was applied to the transferred Si NM to form high-quality SiO{sub 2} and thus a Si/SiO{sub 2} pair with uniform and precisely controlled thicknesses. The Si/SiO{sub 2} layers, as smooth as epitaxial grown layers, minimize scattering loss at the interface and in between the layers. As a result, a reflection of 99.8% at the wavelength range from 1350 nm to 1650 nm can be measured from a 2.5-pair DBR on a quartz substrate and 3-pair DBR on a Si substrate with thickness of 0.87 μm and 1.14 μm, respectively. The high reflection, ultra-thin DBRs developed here, which can be applied to almost any devices and materials, holds potential for application in high performance optoelectronic devices and photonics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A nitrogen doped low-dislocation density free-standing single crystal diamond plate fabricated by a lift-off process

A nitrogen-doped single crystal diamond plate with a low dislocation density is fabricated by chemical vapor deposition (CVD) from a high pressure high temperature synthetic type IIa seed substrate by ion implantation and lift-off processes. To avoid sub-surface damage, the seed surface was subjected to deep ion beam etching. In addition, we introduced a nitrogen flow during the CVD step to grow low-strain diamond at a relatively high growth rate. This resulted in a plate with low birefringence and a dislocation density as low as 400 cm{sup −2}, which is the lowest reported value for a lift-off plate. Reproducing this lift-off process may allow mass-production of single crystal CVD diamond plates with low dislocation density and consistent quality.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fatique crack growth behavior of a single crystal alloy as observed through an in situ fatigue loading stage

An in situ fatigue loading stage inside a scanning electron microscope (SEM) was used to determine the fatigue crack growth behavior of a PWA 1480 single-crystal nickel-based superalloy. The loading stage permits real-time viewing of the fatigue damage processes at high magnification. The PWA 1480 single-crystal, single-edge notch specimens were tested with the load axis parallel to the (100) orientation. Two distinct fatigue failure mechanisms were identified. The crack growth rate differed substantially when the failure occurred on a single slip system in comparison to multislip system failure. Two processes by which crack branching is produced were identified and are discussed. Also discussed are the observed crack closure mechanisms.

Telesman, Jack↗

Fatigue crack growth behavior of a single crystal alloy as observed through an in situ fatigue loading stage

An in situ fatigue loading stage inside a scanning electron microscope (SEM) was used to determine the fatigue crack growth behavior of a PWA 1480 single-crystal nickel-based superalloy. The loading stage permits real-time viewing of the fatigue damage processes at high magnification. The PWA 1480 single-crystal, single-edge notch specimens were tested with the load axis parallel to the (100) orientation. Two distinct fatigue failure mechanisms were identified. The crack growth rate differed substantially when the failure occurred on a single slip system in comparison to multislip system failure. Two processes by which crack branching is produced were identified and are discussed. Also discussed are the observed crack closure mechanisms.

Telesman, Jack↗

Influence of composition on the microstructure and mechanical properties of a nickel-base superalloy single crystal

The effects of cobalt, tantalum, and tungsten contents on the microstructure and mechanical properties of single crystal Mar-M247 were investigated. Elevated temperature tensile and creep-rupture properties of 001 oriented single crystals were related to microstructural features of the alloys. Substitution of Ni for Co in the high refractory metal alloys increased the lattice mismatch, which was considered to be the cause of the increases in tensile and creep strength. Substitution of Ni for Ta caused large decreases in tensile strength and creep life, consistent with decreases in gamma prime volume fraction, lattice mismatch, and solid solution hardening. Substitution of W for Ta resulted in decreased life at high stresses, which was related to small decreases in mismatch and volume fraction. However, the W substitution resulted in improved life at low stresses, which was related to solid solution strengthening by W.

Nathal, M. V.↗

Influence of composition on the microstructure and mechanical properties of a nickel-base superalloy single crystal

The effects of cobalt, tantaium, and tungsten contents on the microstructure and mechanical properties of single crystal Mar-M247 were investigated. Elevated temperature tensile and creep-rupture properties of 001 oriented single crystals were related to microstructural features of the alloys. Substitution of Ni for Co in the high refractory metal alloys increased the lattice mismatch, which was considered to be the cause of the increases in tensile and creep strength. Substitution of Ni for Ta caused large decreases in tensile strength and creep life, consistent with decreases in gamma prime volume fraction, lattice mismatch, and solid solution hardening. Substitution of W for Ta resulted in decreased life at high stresses, which was related to small decreases in mismatch and volume fraction. However, the W substitution resulted in improved life at low stresses, which was related to solid solution strengthening by W.

Nathal, M. V.↗

Influence of defects formed by fast reactor neutrons on exciton luminescence spectra of cadmium sulfide single crystals

The influence of clusters of defects formed by irradiation with neutrons in CdS single crystals on parameters of the spectra of exciton photoluminescence at T {approx} 4.2 K has been studied. It is experimentally established that irradiation of the samples with fast reactor neutrons with energies E {approx} 1 MeV and dose {Phi} = 3 x 10{sup 18} cm{sup -2} brings about a decrease (by approximately 50 times) in the intensity of lines of exciton photoluminescence I{sub 1} ({lambda}{sub m} = 488.7 nm), I{sub 2} ({lambda}{sub m} = 486.9 nm), and I{sub 3} ({lambda}{sub m} = 486.3 nm) with redistribution of intensities in favor of the lines I{sub 1} and I{sub 3} and an increase in their half-width from 2 to 5-6 the positions of their peaks in the emission spectrum. Observed experimental facts are explained on the basis of a model of a two-phase system composed of slightly damaged region in the CdS single crystal in which clusters of defects (formed as a result of irradiation with neutrons) are embedded; these clusters are nanosized grains with a highly disordered structure.

36 MATERIALS SCIENCE↗

Near-optimal combination of high performance and insensitivity in a shock compressed high explosive single crystal

Achieving the desired combination of superior detonation performance and insensitivity to shock initiation has been a long-standing goal in high explosive (HE) science and technology. Having previously established the shock insensitivity of 1,1-diamino-2,2-dinitroethene (also known as DADNE or FOX-7) single crystals to 20 GPa (extended to 25 GPa in this work), the FOX-7 detonation response was determined through wave profile measurements in ~250 μm thick single crystals shock compressed to 64 GPa. Quite unexpectedly, FOX-7 demonstrated the classic Chapman–Jouguet (C–J) detonation response—reaction completion in the detonation front (<0.7 ns) at pressures of 44 GPa and higher—not observed in other insensitive high explosives. Here, the experimentally determined C–J pressure (35 GPa), detonation wave velocities and the detonation products equation of state—together with shock insensitivity to 25 GPa—demonstrate that FOX-7 single crystals display a near-optimal combination of high performance and shock insensitivity, not observed in another HE crystal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic properties of Co{sub 2}V{sub 2}O{sub 7} single crystals grown by flux method

Based on the phase diagram of CoO-V{sub 2}O{sub 5} system, single crystals of Co{sub 2}V{sub 2}O{sub 7} are grown using V{sub 2}O{sub 5} as self-flux at a slow cooling rate. The quality of grown crystals is analyzed by X-ray powder diffraction and electron probe microanalysis techniques. Magnetic properties are investigated by means of susceptibility, magnetization, and heat capacity measurements. Our experimental results suggest that Co{sub 2}V{sub 2}O{sub 7} is a three-dimensional antiferromagnet, in which two magnetic transitions may occur at low temperature and a spin-flop-like transition may occur at the applied field along the b-axis. By contrast to Ni{sub 2}V{sub 2}O{sub 7}, it is suggested that similar and different magnetic properties may arise from their similar crystal structures and different magnetic ions, respectively. - Abstract: Single crystals of Co{sub 2}V{sub 2}O{sub 7} are grown using V{sub 2}O{sub 5} as self-flux at a slow cooling rate. Magnetic properties are investigated by means of susceptibility, magnetization, and heat capacity measurements, showing that Co{sub 2}V{sub 2}O{sub 7} is likely to be a three-dimensional antiferromagnet with two magnetic transitions at low temperature. Display Omitted

36 MATERIALS SCIENCE↗

Surface Atomic Rearrangement with High Cation Ordering for Ultra-Stable Single-Crystal Ni-Rich Co-Less Cathode Materials

It is crucial to minimize cobalt content in Ni-rich layered single-crystal cathodes due to their high price and limited availability, yet it will inevitably lead to cation disordering, capacity degradation, and thermal issues. Herein, to overcome the intrinsic trade-off between performance and composition of Ni-rich Co-less single-crystal cathodes, a precursor engineering strategy with an epitaxially grown cobalt enrichment on the surface is innovatively proposed. In contrast to traditional coating modifications with random orientation and rigid surface-bulk boundary, the epitaxially enriched surface cobalt layer on the precursor undergoes rapid interdiffusion with the internal Ni 3+ during the optimized sintering process. This interdiffusion eliminates the surface-bulk boundary, promoting the uniform distribution of cobalt and synergistically addressing the Li/Ni intermixing. Moreover, an enhanced surface Li + diffusion is obtained, thereby suppressing the Li + concentration gradient and intragranular cracks generation. Consequently, the modified LiNi 0.7 Co 0.07 Mn 0.23 O 2 exhibits impressive cycling stability with increased capacity retention in both coin-type half-cells and pouch-type full-cells (91% after 1000 cycles), even under the harsh condition of high-temperature, surpassing the majority of previously reported Ni-rich cathodes. Finally, this work opens new avenues toward the low cost, high energy density, thermal stability, and long cyclic life for Ni-rich Co-less cathodes and sheds light on large-scale commercial production.

25 ENERGY STORAGE↗

Electric polarization observed in single crystals of multiferroic Lu 2 MnCoO 6

We report electric polarization and magnetization measurements in single crystals of double perovskite Lu 2 MnCoO 6 using pulsed magnetic fields and optical second harmonic generation in dc magnetic fields. We observe well-resolved magnetic field-induced changes in the electric polarization in single crystals and thereby resolve the question about whether multiferroic behavior is intrinsic to these materials or is an extrinsic feature of polycrystals. We find electric polarization along the crystalline b axis, that is suppressed by applying a magnetic fields along the c axis, and advance a model for the origin of magnetoelectric coupling. We furthermore map the phase diagram using both capacitance and electric polarization to identify regions of ordering and regions of magnetoelectric hysteresis. This compound is a rare example of coupled hysteretic behavior in the magnetic and electric properties. Furthermore, the ferromagneticlike magnetic hysteresis loop that couples to hysteretic electric polarization can be attributed not to ordinary ferromagnetic domains, but to the rich physics of magnetic frustration of Ising-like spins in the axial next-nearest-neighbor interaction model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design and analysis of large-core single-mode windmill single crystal sapphire optical fiber

We present a large-core single-mode “windmill” single crystal sapphire optical fiber (SCSF) design, which exhibits single-mode operation by stripping off the higher-order modes (HOMs) while maintaining the fundamental mode. The “windmill” SCSF design was analyzed using the finite element analysis method, in which all the HOMs are leaky. The numerical simulation results show single-mode operation in the spectral range from 0.4 to 2 μm in the windmill SCSF, with an effective core diameter as large as 14 μm. Such fiber is expected to improve the performance of many of the current sapphire fiber optic sensor structures.

36 MATERIALS SCIENCE↗

Ultrafast photo-induced phonon hardening due to Pauli blocking in MAPbI 3 single-crystal and polycrystalline perovskites

Metal-halide perovskite semiconductors have attracted intense interest over the past decade, particularly for applications in photovoltaics. Low-energy optical phonons combined with significant crystal anharmonicity play an important role in charge-carrier cooling and scattering in these materials, strongly affecting their optoelectronic properties. We have observed optical phonons associated with Pb–I stretching in both MAPbI 3 single crystals and polycrystalline thin films as a function of temperature by measuring their terahertz conductivity spectra with and without photoexcitation. An anomalous bond hardening was observed under above-bandgap illumination for both single-crystal and polycrystalline MAPbI 3 . First-principles calculations reproduced this photo-induced bond hardening and identified a related lattice contraction (photostriction), with the mechanism revealed as Pauli blocking. For single-crystal MAPbI 3 , phonon lifetimes were significantly longer and phonon frequencies shifted less with temperature, compared with polycrystalline MAPbI 3 . We attribute these differences to increased crystalline disorder, associated with grain boundaries and strain in the polycrystalline MAPbI 3 . Thus we provide fundamental insight into the photoexcitation and electron–phonon coupling in MAPbI 3 .

36 MATERIALS SCIENCE↗

Single-crystal structure study of iron chalcogenides Fe{sub 1+δ}Te{sub 1−x}S{sub x}

Single crystals of iron chalcogenides Fe{sub 1+δ}Te{sub 1−x}S{sub x} (x = 0, 0.09, and 0.1) were studied by scanning, transmission, and scanning transmission electron microscopy. In addition, a sample with x = 0 was studied by X-ray diffraction. The Te-site disorder observed in Fe{sub 1+δ} samples is, apparently, assigned to the incorporation of superstoichiometric iron Fe2 into the structure. The Fe1 atoms were found to be displaced from their ideal positions, which can only partially be attributed to electro-optical effects. The replacement of Te atoms by S in Fe{sub 1+δ}Te{sub 1−x}S{sub x} crystals gives rise to domains with ordered S atoms in some regions of the single crystal, resulting in the formation of a 2 × 1 or 2 × 2 superstructure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗