Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sim”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Diffusion-dominated mixing in moderate convergence implosions

High-$Z$ material mixed into the fuel degrades inertial fusion implosions and can prevent ignition. Mix is often assumed to be dominated by hydrodynamic instabilities, but in this paper we report Omega data, using shells with ${\sim}150\mathrm{nm}$ deuterated layers to gain unprecedented resolution, which give strong evidence that the dominant mix mechanism is diffusion for these moderate temperature (${\lesssim}6$ keV) and convergence (${\sim}12$) implosions. Finally, small-scale instability-driven or turbulent mix is negligible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Measurement of Room-Temperature Nondiffusive Thermal Transport Over Micron Distances in a Silicon Membrane

The “textbook” phonon mean free path of heat carrying phonons in silicon at room temperature is ${\sim}40\text{ }\text{ }\mathrm{nm}$. However, a large contribution to the thermal conductivity comes from low-frequency phonons with much longer mean free paths. We present here a simple experiment demonstrating that room-temperature thermal transport in Si significantly deviates from the diffusion model already at micron distances. Absorption of crossed laser pulses in a freestanding silicon membrane sets up a sinusoidal temperature profile that is monitored via diffraction of a probe laser beam. By changing the period of the thermal grating we vary the heat transport distance within the range ${\sim}1-10\text{ }\text{ }{\mu}\mathrm{m}$. At small distances, we observe a reduction in the effective thermal conductivity indicating a transition from the diffusive to the ballistic transport regime for the low-frequency part of the phonon spectrum.

74 ATOMIC AND MOLECULAR PHYSICS↗

Inferred Cosmic-Ray Spectrum from Fermi Large Area Telescope γ -Ray Observations of Earth’s Limb

Accurate measurements of cosmic-ray (CR) species by ATIC-2, CREAM, and PAMELA recently reveal an unexpected hardening in the proton and He spectra above a few hundred GeV, a gradual softening of the spectra just below a few hundred GeV, and a harder spectrum of He compared to that of protons. These newly discovered features may offer a clue to the origin of high-energy CRs. Here, we use the Fermi Large Area Telescope observations of the γ -ray emission from Earth’s limb for an indirect measurement of the local spectrum of CR protons in the energy range ~ 90 GeV – 6 TeV (derived from a photon energy range 15 GeV–1 TeV). Our analysis shows that single power law and broken power law spectra fit the data equally well and yield a proton spectrum with index 2.68 ± 0.04 and 2.61 ± 0.08 above ~ 200 GeV , respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Supersymmetric Exotic Decays of the 125 GeV Higgs Boson

We reveal a set of novel decay topologies for the 125 GeV Higgs boson in supersymmetry which are initiated by its decay into a pair of neutralinos, and discuss their collider search strategies. This category of exotic Higgs decays are characterized by the collider signature: visible objects + $\mbox{${\not\! E}_{\rm T}$}$, with $\mbox{${\not\! E}_{\rm T}$}$ dominantly arising from escaping dark matter particles. Their benchmark arises naturally in the Peccei-Quinn symmetry limit of the MSSM singlet-extensions, which is typified by the co-existence of three light particles: singlet-like scalar $h_1$ and pseudoscalar $a_1$, and singlino-like neutralino $\chi_1$, all with masses of $\lesssim 10$ GeV, and the generically suppression of the exotic decays of the 125 GeV Higgs boson $h_2\to h_1 h_1$, $a_1a_1$ and $\chi_1\chi_1$, however. As an illustration, we study the decay topology: $h_2 \to \chi_1 \chi_2$, where the bino-like $\chi_2$ decays to $h_1 \chi_1$ or $a_1 \chi_1$, and $h_1/a_1 \to f\bar f$, with $f\bar f = \mu^+\mu^-$, $b\bar b$. In the di-muon case ($m_{h_1/a_1} \sim 1$ GeV), a statistical sensitivity of $\frac{S}{\sqrt{B}} > 6 \sigma$ can be achieved easily at the 8 TeV LHC, assuming $\frac{\sigma(pp \rightarrow W h_2)}{\sigma(pp \rightarrow W h_{\rm SM})} {\rm Br}(h_2 \to \mu^+\mu^- \chi_1 \chi_1)=0.1$. In the $b\bar b$ case ($m_{h_1/a_1} \sim 45$ GeV), 600 fb$^{-1}$ data at the 14 TeV LHC can lead to a statistical sensitivity of $\frac{S}{\sqrt{B}} > 5 \sigma$, assuming $\frac{\sigma(pp \rightarrow Z h_2)}{\sigma(pp \rightarrow Z h_{\rm SM})} {\rm Br}(h_2 \to b\bar b \chi_1 \chi_1)=0.5$. These exotic decays open a new avenue for exploring new physics couplings with the 125 GeV Higgs boson at colliders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Highly Resolved Measurements of a Developing Strong Collisional Plasma Shock

In this paper, the structure of a strong collisional shock front forming in a plasma is directly probed for the first time in laser-driven gas-jet experiments. Thomson scattering of a 526.5 nm probe beam was used to diagnose temperature and ion velocity distribution in a strong shock ($M{\sim}11$) propagating through a low-density (${\rho}{\sim}0.01\text{ }\text{ }\mathrm{mg}/\mathrm{cc}$) plasma composed of hydrogen. A forward-streaming population of ions traveling in excess of the shock velocity was observed to heat and slow down on an unmoving, unshocked population of cold protons, until ultimately the populations merge and begin to thermalize. Finally, instabilities are observed during the merging, indicating a uniquely plasma-phase process in shock front formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic Theory of Spin Diffusion and Superdiffusion in X X Z Spin Chains

We address the nature of spin transport in the integrable XXZ spin chain, focusing on the isotropic Heisenberg limit. We calculate the diffusion constant using a kinetic picture based on generalized hydrodynamics combined with Gaussian fluctuations: we find that it diverges, and show that a self-consistent treatment of this divergence gives superdiffusion, with an effective time-dependent diffusion constant that scales as $D(t) \sim t^{1/3}$. This exponent had previously been observed in large-scale numerical simulations, but had not been theoretically explained. We briefly discuss XXZ models with easy-axis anisotropy $\Delta > 1$. Our method gives closed-form expressions for the diffusion constant $D$ in the infinite-temperature limit for all $\Delta > 1$. We find that $D$ saturates at large anisotropy, and diverges as the Heisenberg limit is approached, as $D \sim (\Delta - 1)^{-1/2}$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantification of Dopant Profiles in SiGe HBT Devices

We report on the use of atom probe tomography (APT), scanning transmission electron microscopy (STEM), and secondary ion mass spectroscopy (SIMS) to characterize doping profiles in the base region of SiGe HBT devices. We compare SIMS profiles obtained from large regions (400 um 2 ) of the device wafer to profiles obtained from individual devices of different emitter window widths (0.25 and 0.18 um 2 ) using APT. From this comparison we show how APT can provide a deeper insight into evaluating the fabrication process and its effects on electrical models of device performance and enabling the building of higher performance systems. We also demonstrate that APT can be used to characterize defects within the intrinsic regions of a device.

Jones, Eric↗

Internal Resistive Barriers Related to Zinc Diffusion During the Growth of Inverted Metamorphic Multijunction Solar Cells

Majority carrier barriers at heterointerfaces are a common source of non-linear resistance that hinders concentrator solar cell performance. The source of a particular barrier is often unclear in a multijunction device with numerous heterointerfaces. In this work, we demonstrate Zn-dopant diffusion during inverted metamorphic multijunction (IMM) device growth to be one key cause of internal barrier formation. Using an inverted GaAs/GaAs tandem solar cell with a high temperature annealing layer grown in between each subcell, we simulate the annealing conditions of a multijunction growth in a simplified structure. Through analysis of the device by secondary ion mass spectrometry (SIMS) and electrochemical capacitance-voltage profiling, we show that annealing causes Zn to diffuse out of the top cell Ga 0.5 In 0.5 P back surface field (BSF) and accumulate in the GaAs base. Through equilibrium band modeling, we show that the resultant doping profile forms an energetic barrier to hole flow in the valence band, which correlates with fill factor losses in the current-voltage curves measured under concentration. When we, instead, employ a C-doped Al 0.2 Ga 0.8 As BSF layer in the top cell, we do not observe evidence of a heterojunction barrier. We attribute this difference to the reduced diffusivity of carbon, confirmed by SIMS, as well as more favorable valence band offsets between GaAs and Al 0.2 Ga 0.8 As. Finally, we compare 5-junction IMM cells with Al 0.2 Ga 0.8 As:C and Ga 0.5 In 0.5 P:Zn BSF layers in the GaAs third junction, respectively, and show a significantly improved concentrator device performance when Al 0.2 Ga 0.8 As:C is employed. Lastly, we demonstrate the importance of designing annealing tolerance into multijunction structures that are subjected to extended annealing during growth.

14 SOLAR ENERGY↗

PPT-GPU: Scalable GPU Performance Modeling

Performance modeling is a challenging problem due to the complexities of hardware architectures. In this paper, we present PPT-GPU, a scalable and accurate simulation framework that enables GPU code developers and architects to predict the performance of applications in a fast, and accurate manner on different GPU architectures. PPT-GPU is part of the open source project, Performance Prediction Toolkit (PPT) developed at the Los Alamos National Laboratory. We extend the old GPU model in PPT that predict the runtimes of computational physics codes to offer better prediction accuracy, for which, we add models for different memory hierarchies found in GPUs and latencies for different instructions. To further show the utility of PPT-GPU, we compare our model against real GPU device(s) and the widely used cycle-accurate simulator, GPGPU-Sim using different workloads from RODINIA and Parboil benchmarks. The results indicate that the predicted performance of PPT-GPU is within a 10% error compared to the real device(s). In addition, PPT-GPU is highly scalable, where it is up to 450x faster than GPGPU-Sim with more accurate results.

97 MATHEMATICS AND COMPUTING↗

Hydrogenation of Dislocation-Limited Heteroepitaxial Silicon Solar Cells: Preprint

Post-deposition hydrogenation by remote plasma significantly improves performance of heteroepitaxial silicon solar cells. Heteroepitaxial deposition of thin crystal silicon on sapphire for photovoltaics (PV) is an excellent model system for the study and improvement of deposition on inexpensive Al2O3-coated (100) biaxially-textured metal foils. Without hydrogenation, PV conversion efficienciesare less than 1% on our model system. Performance is limited by carrier recombination at electrically active dislocations that result from lattice mismatch, and other defects. We find that low-temperature hydrogenation at 350 degrees C is more effective than hydrogenation at 610 degrees C. In this work, we use measurements such as spectral quantum efficiency, secondary ion mass spectrometry(SIMS), and vibrational Si-H spectroscopies to understand the effects of hydrogenation on the materials and devices. Quantum efficiency increases most at red and green wavelengths, indicating hydrogenation is affecting the bulk more than the surface of the cells. SIMS shows there are 100X more hydrogen atoms in our cells than dangling bonds along dislocations. Yet, Raman spectroscopy indicatesthat only low temperature hydrogenation creates Si-H bonds; trapped hydrogen does not stably passivate dangling-bond recombination sites at high temperatures.

14 SOLAR ENERGY↗

Phosphorus Doping of Polycrystalline CdTe by Diffusion

Phosphorus diffusion in single crystal and polycrystalline CdTe material is explored using various methods. Dynamic secondary ion mass spectroscopy (SIMS) is used to determine 1D P diffusion profiles. A 2D diffusion model is used to determine the expected cross-sectional distribution of P in CdTe after diffusion anneals. Time of flight SIMS and cross-sectional cathodoluminescence corroborates expected P distributions. Devices fabricated with diffused P exhibit hole concentrations up to low 1015 cm-3, however a subsequent activation anneal enabled hole concentrations greater than 1016 cm-3. CdCl2 treatments and Cu based contacts were also explored in conjunction with the P doping process.

14 SOLAR ENERGY↗

Comparison of PID Shunting in Polycrystalline and Single-Crystal Silicon Modules via Multi-Scale, Multi-Technique Characterization

We used the methods we reported last year to investigate potential-induced degradation (PID). We have now applied these methods to single-crystalline silicon modules that have degraded during field deployment, as well as in minimodules stressed in the laboratory. We will compare these results to the polycrystalline results presented last year. Small cores have been removed from the modules and subjected to analysis. We use a combination of photoluminescence and dark lock-in thermography imaging, laser marking, electron-beam induced current measurements, and subsequent focused ion-beam marking to allow analysis of individual defects via time-of-flight secondary-ion mass spectrometry (TOF-SIMS) to investigate the root-cause mechanism for PID shunting. We see a direct correlation between recombination active shunts and sodium content. The sodium content in shunted areas peaks at the SiN/Si interface and is consistently observed at a concentration of 0.1%-1% in shunted areas. TOF-SIMS data taken on degraded and non-degraded single-crystalline sample areas show a similar trend as in the polycrystalline samples: more sodium is seen in the degraded areas.

14 SOLAR ENERGY↗

An Evaluation of the Effect of Network Cost Optimization for Leadership Class Supercomputers

Dragonfly-based networks are an extensively deployed network topology in large-scale high-performance computing due to their cost-effectiveness and efficiency. The US will soon have three Exascale supercomputers for leadership class workloads deployed using dragonfly networks. Compared to indirect networks of similar scale, the dragonfly network has considerably reduced cable lengths, cable counts, and switch counts, resulting in significant network cost savings for a given system size, however, these cost reductions result in reduced global minimal paths and more challenging routing. Additionally, large scale dragonfly networks often require a taper at the global link level, resulting in less bisection bandwidth than is achievable in other traditional non-blocking topologies of equivalent scale. While dragonfly networks have been extensively studied, they have yet to be fully evaluated in an extreme scale (i.e., exascale) system that targets capability workloads. In this paper, we present the results of the first large scale evaluation of a dragonfly network on an exascale system (Frontier) and compare its behavior to a similar scale fat-tree network on a previous generation TOP500 system (Summit). This evaluation aims to determine the effect of network cost optimizations by measuring a tapered topology’s impact on capability workloads. Our evaluation is based on a collection of synthetic microbenchmarks, mini-apps, and full scale applications. It compares the scaling efficiencies of each benchmark between the dragonfly-based Frontier and the fat-tree-based Summit systems. Our results show that a dragonfly network is $\sim \mathbf{3 0 \%}$ more cost efficient than a fat-tree topology, which amortizes to $\sim 3 \%$ of an exascale system cost. Furthermore, while tapered dragonfly networks impose significant tradeoffs, the impacts are not as broad as initially thought and are mostly seen in applications with global communication patterns, particularly all-to-all (e.g., FFT-based algorithms), but also local communication patterns (e.g., nearest-neighbor algorithms) that are sensitive to network performance variability.

Khan, Awais↗

Effect of Different Cutting Techniques on the Surface Morphology and Composition of Niobium

The surface morphology and chemical purity of superconducting radio frequency (SRF) niobium cavities are very important for proper accelerator operation. Typically on the order of 120 micrometers of niobium (Nb) is removed from cavities to remove damage done during the forming of Nb sheets and cavities. A study was done to find the effect of cutting or finishing Nb with a band saw, diamond saw, electrical discharge machining (EDM) wire, garnet water jet, sheer, and mill. Surface contamination of the samples was measured before and after buffered chemical polish (BCP) by secondary ion mass spectroscopy (SIMS), energy dispersive spectroscopy (EDS), and by measuring relative resistivity ratios (RRRs). Surface morphology was examined with a digital microscope, a surface profilometer and scanning electron microscope (SEM). It was found that all techniques altered the top 3-5 micrometers of the Nb. It was also found by SIMS that the water jet technique introduced the most hydrogen and oxygen to the Nb in the first 2.5 micrometers of the sample. The EDM wire cutting technique introduced the least amount of hydrogen to the Nb. After 5 micrometers were etched away by BCP on the various samples, no contaminants were found except on the water jet cut samples. Even after 20 micrometers of Nb removal silica could be seen on the surface with EDS. The water jet produced the roughest surface with 50-100 micrometer deep pits made from embedded garnet particles. It was found that the garnet water jet damages the surface to the point where even the typical 120 micrometers of BCP etching may not remove all the defects created.

43 PARTICLE ACCELERATORS↗

Characterization of MKIDs for CMB Observation at 220 GHz With the South Pole Telescope

We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_{i} = 4.8 \times 10^{5}$, aluminum inductor transition temperature $T_{c} = 1.19$K, and kinetic inductance fraction $\alpha _{k} = 0.32$. We optically characterize both the microstrip-coupled and CPW-coupled resonators, and find both have a spectral response close to prediction with an optical efficiency of $\eta \sim 70\%$. However, we find slightly lower optical response on the lower edge of the band than predicted, with neighboring dark detectors showing more response in this region, though at level consistent with less than 5% frequency shift relative to the optical detectors. The detectors show polarized response consistent with expectations, with a cross-polar response of $\sim 10\%$for both detector orientations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Secondary Ion Mass Spectrometry Methodology for Isotopic Ratio Measurement of Micro‐Grains in Thin Sections: True Grain Size Estimation and Deconvolution of Inter‐Grain Size Gradients and Intra‐Grain Radial Gradients

In a thin section, grains that were approximately spherical in situ appear circular in cross section, and the distribution of apparent diameters frequently assumed to be their size distribution. Scanning ion imaging by secondary ion mass spectrometry (SIMS) is capable of providing precise (< 1‰) stable isotope ratio measurements of such grains, but, importantly, also registers their rate of evolution in apparent size as they are ablated by the primary beam. By assessing rates of radius change with depth, the described methodology enables the ‘true’ size of grains to be estimated, as well as the distance of the sectioned surface from the original grain centre. Transects in three dimensions are made possible, and this capability enables better identification (and thus separation) of both inter‐grain chemical signatures as a function of grain size, and intra‐grain radial trends. In this example, we highlight the specific application to pyrite (FeS 2 ) minerals, which are frequently analysed by SIMS to determine their inter‐grain and intra‐grain geochemical variations, particularly in their sulfur stable isotopic ratios (δ 34 S). Benefits of the new methodology over the Faraday cup ‘spot mode’ are described. Data correction algorithms and precision considerations are discussed.

Jones, Clive↗