Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Signature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Gravity Signature of the Teague Ring Impact Structure, Western Australia

As part of a multidisciplinary effort to better define the nature of the Teague Ring structure and to understand specifics about the crustal structure, a GPS controlled gravity survey of the feature was undertaken in the austral winter of 1996.

Gravity Teague Ring crustal structure GPS Australi↗

Can Satellite Geodesy Disentangle Holocene Rebound and Present-Day Glacier Balance Signatures?

The secular drift of the precession of the ascending node of the LAGOES -1 satellite is apparently linked to the Earth s paleoclimate through the slow viscous response of the mantle to ice sheet/ocean mass transfer during the last great continental deglaciation . The secular node acceleration is particularly sensitive to the longest wavelengths of the paleo -surface loading that have been memorized by the mantle glacio -isostatic flow. Tide gauge records for the last 130 years show a post-glacial rebound-corrected sea-level rise of 2.4 n 0.9 mm yr-1.

glacio-isostatic flow tide gauge records post-glac↗

Mode-expansion method for predicting radar signature above rough ocean surfaces at low-grazing angle

The Mode-Expansion Method (MEM) is introduced to calculate the electromagnetic (EM) waves scattered by 2-D rough water surfaces at low-grazing angles. The Electric Field Integral Equation (EFIE) is used in defining the problem and is simplified by using the Impedance Boundary Condition (IBC). The surface currents are expressed as the sum of modes expanded as the Fourier series with incident wave as the dominant mode. It is shown that, by the MEM and for the geometry with transmitting and receiving waves at low-grazing angles, very few modes are needed in solving the forward scattering field with reasonable accuracy.

electromagnetic (EM)↗

CO Signatures in Subtropical Convective Clouds and Anvils during CRYSTAL-FACE: An Analysis of Convective Transport and Entrainment using Observations and a Cloud-Resolving Model

Convective systems are an important mechanism in the transport of boundary layer air into the upper troposphere. The Cirrus Regional Study of Tropical Anvils and Cirrus Layers-Florida Area Cirrus Experiment (CRYSTAL-FACE) campaign, in July 2002, was developed as a comprehensive atmospheric mission to improve knowledge of subtropical cirrus systems and their roles in regional and global climate. In situ measurements of carbon monoxide (CO), water vapor (H2Ov), and total water (H2Ot) aboard NASA's WB-57F aircraft and CO aboard the U.S. Navy's Twin Otter aircraft were obtained to study the role of convective transport. Three flights sampled convective outflow on 11, 16 and 29 July found varying degrees of CO enhancement relative to the free troposphere. A cloud-resolving model used the in situ observations and meteorological fields to study these three systems. Several methods of filtering the observations were devised here using ice water content, relative humidity with respect to ice, and particle number concentration as a means to statistically sample the model results to represent the flight tracks. A weighted histogram based on ice water content observations was then used to sample the simulations for the three flights. In addition, because the observations occurred in the convective outflow cirrus and not in the storm cores, the model was used to estimate the maximum CO within the convective systems. In general, anvil-level air parcels contained an estimated 20-40% boundary layer air in the analyzed storms.

Lopez, Jimena P.↗

Final Results from the BIMA CMB Anisotropy Survey and Search for Signature of the SZ Effect

We report the final results of our study of the cosmic microwave background (CMB) with the BIMA array. Over 1000 hours of observation were dedicated to this project exploring CMB anisotropy on scales between 1' and 2' in eighteen 6'.6 FWHM fields. In the analysis of the CMB power spectrum, the visibility data is divided into two bins corresponding to different angular scales. Modeling the observed excess power as a flat band of average multipole l(sub eff)= 5237, we find deltaT(sup 2)(sub 1) = 220(sup +140)(sub -120) mu K(sup 2) at 68% confidence and deltaT(sup 2)(sub 1) greater than 0 muK(sup 2) with 94.7% confidence. In a second band with average multipole of l(sub eff) = 8748, we find deltaT(sup 2)(sub 2) consistent with zero, and an upper limit 880 muK(sup 2) at 95% confidence. An extensive series of tests and supplemental observations with the VLA provide strong evidence against systematic errors or radio point sources being the source of the observed excess power. The dominant source of anisotropy on these scales is expected to arise from the Sunyaev-Zel'dovich (SZ) effect in a population of distant galaxy clusters. If the excess power is due to the SZ effect, we can place constraints on the normalization of the matter power spectrum sigma(sub 8) = 1.03(sup +0.20)(sub -0.29) at 68% confidence. The distribution of pixel fluxes in the BIMA images are found to be consistent with simulated observations of the expected SZ background and rule out instrumental noise or radio sources as the source of the observed excess power with similar confidence to the detection of excess power. Follow-up optical observations to search for galaxy over-densities anti-correlated with flux in the BIMA images, as might be expected from the SZ effect, proved to be inconclusive.

Dawson, K. S.↗

Observations of the Ion Signatures of Double Merging and the Formation of Newly Closed Field Lines

Observations from the Polar spacecraft, taken during a period of northward interplanetary magnetic field (IMF) show magnetosheath ions within the magnetosphere with velocity distributions resulting from multiple merging sites along the same field line. The observations from the TIDE instrument show two separate ion energy-time dispersions that are attributed to two widely separated (-20Re) merging sites. Estimates of the initial merging times show that they occurred nearly simultaneously (within 5 minutes.) Along with these populations, cold, ionospheric ions were observed counterstreaming along the field lines. The presence of such ions is evidence that these field lines are connected to the ionosphere on both ends. These results are consistent with the hypothesis that double merging can produce closed field lines populated by solar wind plasma. While the merging sites cannot be unambiguously located, the observations and analyses favor one site poleward of the northern cusp and a second site at low latitudes.

Chandler, Michael O.↗

Using Global Simulations to Relate the Three-Part Structure of Coronal Mass Ejections to in Situ Signatures

White-light observations of coronal mass ejections (CMEs) often show the classic "three-part" structure consisting of (1) a bright front; (2) a dark cavity; and (3) a bright, compact core. It has proven difficult to unambiguously associate these features with in situ measurements of interplanetary CMEs (ICMEs), in all but a few cases. In this study we use a global MHD model to simulate the eruption and evolution of a CME out to 0.25 AU, allowing us to continuously track these features from the Sun and through the solar wind. Our results support the generally held view that the interplanetary flux rope corresponds to the dark cavity. We find that the bright front merges with solar wind material swept up by the ICME. Thus, the sheath material found ahead of fast ejecta is in fact composed from both ambient solar wind material, as well the bright front. We also note that, in this simulation, the bright front is formed from the overlying streamer configuration from within which the CME erupted and is not itself coronal material swept up during the early phase of the eruption. The conclusions reached in this study are undoubtedly sensitive to the initial configuration and mechanism used to initiate the CME, and thus care should be taken when using them to interpret specific observations. On the other hand, they provide a unique, unbroken connection between remote solar and interplanetary observations. Ultimately, detailed comparisons between observations and simulation results may be able to constrain or even rule out some mechanisms of CME initiation.

Riley, Pete↗

Using Global Simulations to Relate the Three-Part Structure of Coronal Mass Ejections to In Situ Signatures

White-light observations of coronal mass ejections (CMEs) often show the classic "three-part" structure consisting of (1) a bright front; (2) a dark cavity; and (3) a bright, compact core. It has proven difficult to unambiguously associate these features with in situ measurements of interplanetary CMEs (ICMEs), in all but a few cases. In this study we use a global MHD model to simulate the eruption and evolution of a CME out to 0.25 AU, allowing us to continuously track these features from the Sun and through the solar wind. Our results support the generally held view that the interplanetary flux rope corresponds to the dark cavity. We find that the bright front merges with solar wind material swept up by the ICME. Thus, the sheath material found ahead of fast ejecta is in fact composed from both ambient solar wind material, as well the bright front. We also note that, in this simulation, the bright front is formed from the overlying streamer configuration from within which the CME erupted and is not itself coronal material swept up during the early phase of the eruption. The conclusions reached in this study are undoubtedly sensitive to the initial configuration and mechanism used to initiate the CME, and thus care should be taken when using them to interpret specific observations. On the other hand, they provide a unique, unbroken connection between remote solar and interplanetary observations. Ultimately, detailed comparisons between observations and simulation results may be able to constrain or even rule out some mechanisms of CME initiation

Riley, Pete↗

System and method of analyzing vibrations and identifying failure signatures in the vibrations

An apparatus, computer program product and method of analyzing structures. Intrinsic Mode Functions (IMFs) are extracted from the data and the most energetic IMF is selected. A spline is fit to the envelope for the selected IMF. The spline derivative is determined. A stability spectrum is developed by separating the positive and negative results into two different spectra representing stable (positive) and unstable (negative) damping factors. The stability spectrum and the non-linearity indicator are applied to the data to isolate unstable vibrations.

Huang, Norden E.↗

NanoSIMS Reveals New Structural and Elemental Signatures of Early Life

The young technology of NanoSIMS is unlocking new information from organic matter in ancient sediments. We have used this technique to characterize sub-micron scale element composition of Proterozoic organics that are clearly biogenic as a guide for interpreting problematic structures in terrestrial or extraterrestrial samples. We used the NanoSIMS 50 of the National Museum of Natural History in Paris to map carbon, nitrogen (as CN), and sulfur in organic structures from the approximately 0.8 Ga Bitter Springs Formation. We analyzed spheroidal and filamentous microfossils as well as organic laminae that appeared amorphous by optical and scanning electron microscopy. In clear-cut microfossils, a coincidence between optical images and NanoSIMS element maps suggests a biological origin for the mapped carbon, sulfur, and nitrogen; this conclusion is supported by high resolution NanoSIMS maps showing identical spatial distributions of C, CN and S. High resolution images also demonstrate distinctive nano structure of the filaments and spheroids. In the amorphous laminae, NanoSIMS reveals morphologies reminiscent of compressed microfossils. Distinct CN/C ratios of the spheroids, filaments, and laminae may reflect their biological precursors (cell walls, cyanobacterial sheaths, and microbial communities/biofilms, respectively). Similar amorphous laminae comprise a preponderance of the organic matter in many Precambrian deposits. Thus it is possible that NanoSIMS will provide fresh insight into a large body of previously uninterpretable material. Additionally, NanoSIMS analysis may establish new biosignatures that will be helpful for assessing the origin and biogenicity of controversial Archean structures and any organic materials that may occur in Martian or other extraterrestrial samples.

Oehler, Dorothy Z.↗

'Nano' Morphology and Element Signatures of Early Life on Earth: A New Tool for Assessing Biogenicity

The relatively young technology of NanoSIMS is unlocking an exciting new level of information from organic matter in ancient sediments. We are using this technique to characterize Proterozoic organic material that is clearly biogenic as a guide for interpreting controversial organic structures in either terrestrial or extraterrestrial samples. NanoSIMS is secondary ion mass spectrometry for trace element and isotope analysis at sub-micron resolution. In 2005, Robert et al. [1] combined NanoSIMS element maps with optical microscopic imagery in an effort to develop a new method for assessing biogenicity of Precambrian structures. The ability of NanoSIMS to map simultaneously the distribution of organic elements with a 50 nm spatial resolution provides new biologic markers that could help define the timing of life s development on Earth. The current study corroborates the work of Robert et al. and builds on their study by using NanoSIMS to map C, N (as CN), S, Si and O of both excellently preserved microfossils and less well preserved, non-descript organics in Proterozoic chert from the ca. 0.8 Ga Bitter Springs Formation of Australia.

Oehler, D. Z.↗

Oxygen Isotopic Signature of 4.4-3.9 Ga Zircons as a Monitor of Differentiation Processes on the Moon

We report oxygen isotopic compositions for 14 zircon grains from a sample of sawdust from lunar breccia 14321. The zircons range in age from approx.4.4 to 3.9 Ga and in U and Th content from a few to several hundred ppm. As such these grains represent a range of possible source rocks, from granophyric to mafic composition, and cover the total age range of the major initial lunar bombardment. Nevertheless, results show that the oxygen isotopic compositions of the zircons fall within a narrow range of (delta18)O of about 1 per mil and have (delta18)O values indistinguishable from those observed for terrestrial mid-ocean ridge basalts confirming the coincidence of lunar and Earth oxygen isotopic compositions. In the (delta17)O vs. (delta18)O, coordinates data form a tight group with a limited trend on the terrestrial fractionation line. The zircon oxygen isotopes show minimal evidence of the extreme and variable mineral differentiation and element fractionation that have contributed to the formation of their parent rocks.

Nemchin, A. A.↗

Searching for Dark Matter Signatures in the GLAST LAT Electron Flux

We explored several viable scenarios of how LAT might observe DM, when the spectral feature is predicted to be observed in the HE electron flux It has been demonstrated elsewhere that LAT will be capable to detect HE electrons flux in energy range from 20 GeV to - 1 TeV with 520% energy resolution and good statistics If there is a DM-caused feature in the HE electron flux (in the range 20 GeV - 1 TeV), LAT will be the best current instrument to observe it!

Moiseev, Alexander↗