Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SURFACE DISTORTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Active Flow Control For Inlets

This presentation describes the progress to date of the Small-Scale Demonstration for the Active Flow Control element of the Propulsion Airframe Integration Project. The goal of this work package is to demonstrate at small scale the ability to improve pressure recovery and distortion in an S-inlet with boundary layer ingestion representative of a Blended Wing Body (BWB) configuration. The effectiveness of several active and passive devices to control flow in an adverse pressure gradient with secondary flows present was evaluated in the Langley 15-Inch Low-Turbulence Tunnel. In this study, passive microvanes, microbumps, and piezoelectric synthetic jets were evaluated for their flow control characteristics using surface static pressures, flow visualization, and 3D Stereo Digital Particle Image Velocimetry. The microvanes imparted a higher level of vorticity to the flow than any of the other devices tested. Alternative actuator concepts are being pursued to support the Small-Scale Demonstration Level 1 milestone in FY03.

Gorton, Susan A.↗

SAR imaging of ocean waves - Theory

A SAR imaging integral for a rough surface is derived. Aspects of distributed target imaging and questions of ocean-wave imaging are considered. A description is presented of the results of analyses which are performed on aircraft and a spacecraft data in order to gain an understanding of the SAR imaging of ocean waves. The analyzed data illustrate the effect of radar resolution on the images of azimuthally traveling waves, the dependence of image distortion on the angle which the waves make with the radar flight path, and the dependence of the focusing parameter of the radar matched filter on the ocean wave period for azimuthally traveling waves. A dependence of ocean-wave modulation on significant wave height is also observed. The observed dependence of the modulations of azimuth waves on radar resolution is in contradiction to the hypothesis that these modulations are caused mainly by velocity bunching.

Jain, A.↗

Metallographic study of metallic fragment of lunar surface material

A high precision investigation of a metallic fragment from the lunar material returned by the Soviet Luna 16 automatic station revealed three characteristic temperature intervals with different kinetics of solid solution decomposition. The following were found in the structure of the iron-nickel-cobalt alloy: (1) delta-phase and alpha-ferrite of diffusional, displacement origin in the grain boundary and acicular forms; and (2) martensite of isothermal and athermal nature, acicular, lamellar, massive, and dendritic. The diversity of the shapes of structural constituents is associated with the effect on their formation of elastic distortions and various mechanisms of deformation relaxation processes.

Mints, R. I.↗

Flow control in a diffusing S-Duct

Accurate measurements have been made of secondary flow in a 1.51 area ratio diffusing 30 deg - 30 deg S-Duct with circulair cross section. Turbulent flow was entering the duct at Mach number of 0.6, the boundary layer thickness at the duct entrance was ten percent of the duct inlet diameter. Through measurements made, local flow velocity vector as well as static and total pressures mapping of the flow at several stations were obtained. Strong secondary flow was measured in the first bend which continued into the second bend with new vorticity produced in there in the opposite direction. Surface oil flow visualization and wall pressures indicated a region of separated flow starting at theta approximately equal to 22 deg on the inside of the first bend up to theta approximately equal to 44 deg on the outside of the second bend. The flow separated in 'cyclone' form and never reattached in the duct. As a result of the secondary flow and the flow separation, significant total pressure distortion was observed at the exit of the duct. Using flow control devices the separation was eliminated while the exit distortion was improved.

Vakili, A. D.↗

L band SAR ocean wave observations during Marsen

The five-sided flight pattern made it possible to view the same ocean surface patch from five different directions. The results obtained from analyzing radar and in situ measurements indicate that the focus dependence for optimum imaging is that for a surface moving with a speed that is approximately equal to the wave phase velocity. The finding also suggest that azimuthally traveling waves can be visible as range traveling waves when the necessary focus adjustments are made in the SAR processor and that the visibility of azimuthally travelling waves does not improve with decreasing integration time. What is more, the spectra and images of azimuthally traveling waves do not show observable distortions compared with those for range traveling waves.

Jain, A.↗

Development of Software to Model AXAF-I Image Quality

This draft final report describes the work performed under the delivery order number 145 from May 1995 through August 1996. The scope of work included a number of software development tasks for the performance modeling of AXAF-I. A number of new capabilities and functions have been added to the GT software, which is the command mode version of the GRAZTRACE software, originally developed by MSFC. A structural data interface has been developed for the EAL (old SPAR) finite element analysis FEA program, which is being used by MSFC Structural Analysis group for the analysis of AXAF-I. This interface utility can read the structural deformation file from the EAL and other finite element analysis programs such as NASTRAN and COSMOS/M, and convert the data to a suitable format that can be used for the deformation ray-tracing to predict the image quality for a distorted mirror. There is a provision in this utility to expand the data from finite element models assuming 180 degrees symmetry. This utility has been used to predict image characteristics for the AXAF-I HRMA, when subjected to gravity effects in the horizontal x-ray ground test configuration. The development of the metrology data processing interface software has also been completed. It can read the HDOS FITS format surface map files, manipulate and filter the metrology data, and produce a deformation file, which can be used by GT for ray tracing for the mirror surface figure errors. This utility has been used to determine the optimum alignment (axial spacing and clocking) for the four pairs of AXAF-I mirrors. Based on this optimized alignment, the geometric images and effective focal lengths for the as built mirrors were predicted to cross check the results obtained by Kodak.

Ahmad, Anees↗

Use of Dynamic Distortion to Predict and Alleviate Loss of Control

This research has developed and evaluated the specific concepts, termed Smart-Cue and Smart-Gain, to alleviate aircraft loss of control that results from unfavorable pilot/vehicle system interactions, including pilot-induced oscillations (PIOs). Unfavorable pilot/ vehicle-system interactions have long been an aviation safety problem. While the effective aircraft dynamic properties involved in these events have been extensively studied and understood, similar scrutiny has not been paid to the many aspects of the primary manual control system that converts the pilot control inputs to motions of the control surfaces. The purpose of the Smart-Cue and Smart-Gain developments is to redress this neglect, and to develop and validate remedial manual control systems.

Klyde, David↗

Reactive Orthotropic Lattice Diffuser for Noise Reduction

An orthotropic lattice structure interconnects porous surfaces of the flap with internal lattice-structured perforations to equalize the steady pressure field on the flap surfaces adjacent to the end and to reduce the amplitude of the fluctuations in the flow field near the flap end. The global communication that exists within all of the perforations provides the mechanism to lessen the pressure gradients experienced by the end portion of the flap. In addition to having diffusive effects (diffusing the incoming flow), the three-dimensional orthogonal lattice structure is also reactive (acoustic wave phase distortion) due to the interconnection of the perforations.

Khorrami, Mehdi R.↗

In-Flight Calibration of ESA Hera’s Hyperscout-H Imager

ESA’s Hera space mission is on its way to the mission target, the binary asteroid (65803) Didymos. HyperScout-H, one of the instruments onboard Hera, is a hyperspectral imager operating in the visible and near-infrared regions between 0.65 and 0.95 μm. HyperScout-H will enable a detailed assessment of the composition of both objects, Didymos and its satellite Dimorphos, the characterization of space weathering effects, and the possible presence of exogenous material on their surfaces. To monitor instrument functionality, calibration exposures are acquired regularly. This article describes the in-flight calibrations carried out for HyperScout-H during the commissioning and cruise phases. Bias and dark exposures, as well as stellar field observations, were acquired several times after launch. We update the calibration data and monitor instrument performance in the space environment. In addition, images of Earth and Moon were acquired from distances of 1.5 × 10 6 to 2.0 × 10 6 km, and Mars and its satellite were imaged during the flyby. In five images, the surface of Mars fills the entire field of view, enabling cross-validation of HyperScout-H results with those reported by other Mars missions. We characterize the detector under in-flight operational conditions. The calibration data indicate that the bias pattern is stable, the dark current remains negligible for short exposures, and the detector response is highly linear. We quantify the field-of-view alignment and geometric distortion, and evaluate the point spread function based on the stellar field observations. Stellar observations and Mars swing-by data provide updated radiometric calibration constants, suggesting that in-flight conditions have slightly modified the detector’s spectral response. In-flight calibrations are essential to ensure data quality and reliability.

Image Processing↗

The Influence of Soil Properties on Sea-Breeze Circulations in the Southeast U.S.

Sea-breeze circulations (SBCs) are common weather phenomena at and near coastal regions. They form because of a thermal gradient between the land surface at the coast and the sea surface. In a mid-day regime, a “thermal low” generated at the warm coast will lead to rising air motion, creating a wind shift coming from the sea near the surface displacing the coastal air. A “return flow” moving back towards the sea is generated by upper-level divergence because of the rising motion from the thermal low. SBCs propagate and serve as a method of urban pollutant dispersion in the Los Angeles region of California and are constrained to the coast due to the topography of surrounding mountains serving as a boundary for further inland propagation. Within the northeast U.S. SBCs are seen in the warm season but tend to remain coastally bound due to Coriolis distortion over long distances. Within the southeast U.S. (SEUS), the paradigmatic example of SBCs occurs over the Florida peninsula, where thunderstorms form on a nearly daily occurrence due to the convergence of SBCs from the east and west sides of the peninsula. However, there are further examples of sea-breezes in the SEUS that warrant study. Within the region bordering the SEUS and the Mid-Atlantic, just east of the southern Appalachian Mountains, warm-season SBCs form at the coast of Georgia and the Carolinas. Relatively flat topography ~150-200km inland allows for mostly unimpeded inland SBC propagation. Through visual analysis, Viner et al. catalogued several SBCs that propagated as far inland as the Central Savannah River Area surrounding Augusta, Georgia. Wermter et al. found that while the land-sea thermal gradient at the coast can influence coastal SBC genesis, the inland-coastal thermal gradient over the land is the primary influencer on the speed and depth of inland propagation of SBCs in this region. Additionally, soil moisture itself is a known correlative factor to sea-breeze formation, as it influences the soil temperature and the thermal gradient needed for SBC genesis and inland penetration. Physick determined that higher latent heat fluxes associated with wetter soil dampen the land-sea thermal gradient and suppress the formation of a SBC. Physick determined that higher latent heat fluxes associated with wetter soil dampen the land-sea thermal gradient and suppress the formation of a SBC. Conversely, drier soil enhances the thermal gradient and promotes SBC formation. However, while there is an inverse relationship between soil moisture and SBCs, higher soil moisture can actually promote more convective rainfall following a SBC if it does not significantly impact the thermal gradient. While the relationship between soil moisture and SBC formation has been conceptually explored and modeled numerically, there is a research gap in observed connections. The Soil Moisture Active Passive (SMAP) satellite mission has been operational since 2015 and has been used to create high-resolution re-analytical Level 4 (L4) datasets of soil moisture and soil temperature at different soil depths: the surface (0-5cm) and rootzone (0-1m). The surface soil temperature effectively acts as the “skin temperature” of the surface at these levels, and a spatial map of the land-sea as well as the coastal-inland thermal gradients can be represented. SMAP data are also assimilated in some atmospheric models such at the High Resolution Rapid Refresh (HRRR) mesoscale model. We propose leveraging the use of SMAP products to fill in spatial gaps left by weather and mesonet stations within the SEUS region, as well as assessing the effectiveness of utilizing SMAP products towards SBC forecasting in both deterministic and machine learning (ML) models.

58 GEOSCIENCES↗

Circularity in polydiketoenamine thermoplastics via control over reactive chain conformation

Controlling the reactivity of bonds along polymer chains enables both functionalization and deconstruction with relevance to chemical recycling and circularity. Because the substrate is a macromolecule, however, understanding the effects of chain conformation on the reactivity of polymer bonds emerges as important yet underexplored. Here, we show how oxy-functionalization of chemically recyclable condensation polymers affects acidolysis to monomers through control over distortion and interaction energies in the rate-limiting transition states. Oxy-functionalization of polydiketoenamines at specific sites on either the amine or triketone monomer segments increased acidolysis rates by more than three orders of magnitude, opening the door to efficient deconstruction of linear chain architectures. These insights substantially broaden the scope of applications for polydiketoenamines in a circular manufacturing economy, including chemically recyclable adhesives for a diverse range of surfaces.

Science & Technology - Other Topics↗

Response of convectively controlled burning to nonlinear disturbances.

A process where energy release rate is proportional to the square root of the Reynolds number of a burning particle or surface is used to demonstrate some distinctive dynamic properties of a disturbed convectively controlled burning process. The instantaneous energy release rates caused by assumed periodic flow field disturbances are numerically evaluated and examined. Correlation coefficients which express the energy released in-phase with the pressure disturbance are evaluated and analytical solutions for these coefficients are derived. The response of the process is shown to be highly sensitive to the harmonic distortion of the disturbance. For some disturbances the energy released in-phase with the pressure disturbance is an order of magnitude larger than that for linear (sinusoidal) disturbances. The results show that harmonic distortion increases the coupling between the burning process and the flow field. This amplifying effect of harmonic distortion is suppressed when a disturbance becomes steep-fronted; therefore, steepening can act to limit the equilibrium amplitudes in disturbed systems. Amplification is also suppressed when the velocity disturbance is phase shifted with respect to the pressure disturbance or when the process is exposed to a high steady velocity.

Heidmann, M. F.↗

COBE anisotropy from supercluster gas

It is suggested that the microwave background anisotropy detected by the COBE DMR might be dominated not by the direct gravitational effect of primordial fluctuations in the last scattering surface, but by scattering off of moving electrons in optically thin, nearby superclusters. Hot diffuse clouds of ionized gas created during supercluster collapse produce Sunyaev-Zel'dovich and Doppler background anisotropy whose properties may closely mimic those of primordial anisotropy in current data. Strategies for and difficulties in separating the effects are discussed, based on the anisotropy spectrum, autocorrelation, correlation with galaxy catalogs, X-ray emission, and integrated spectral distortions.

Hogan, Craig J.↗

Control of machining-induced residual stress via tool geometry and process parameter modification

Distortion generated in machined, monolithic, thin-walled aerospace components due to residual stresses leads to significant material and economic waste in the manufacturing industry. Inherent residual stress (IRS) present in stock materials combines with machining-induced residual stress (MIRS) to influence the final machined part distortion. It is hypothesized that MIRS can be controlled, based on the part geometry, through deliberate cutting tool geometry and process parameter modifications to negate the effect of IRS on distortion, consequently resulting in distortion-free parts. A finite element (FE) orthogonal cutting model is developed to study how tool geometry and process parameters influence machining-induced residual stress (MIRS). Orthogonal cutting experiments are performed on Al 7075-T651 samples to measure cutting forces and MIRS. A cutting force dynamometer is used to measure forces during cutting and a novel digital image correlation (DIC) based hole drilling technique is employed to measure the near-surface residual stress (RS) in the cut samples. These data are subsequently utilized to validate the FE prediction model. Various cases of cutting simulations involving different depths of cut, tool tip radii, and rake angles are performed to study their effects on RS. Similar to prior literature, increasing the depth of cut, tool tip radius, or rake angle is found to promote the formation of near-surface tensile stresses. The competing effects of material plowing and temperature are shown to determine the type of RS at the end of the cut. Moreover, a window of variation of RS (up to ± 400 MPa) is estimated within the given range of conditions, allowing for the control of MIRS through tool and process modification.

Mathews, Ritin [ORNL] (ORCID:0000000301440828)↗

Electronic structure, and magnetic and superconducting pairing tendencies of the alternating single layer–bilayer stacking nickelate La 5 ⁢Ni 3 ⁢O 11 under pressure

Nickelates have continued to surprise since their unconventional superconductivity was discovered. Recently, the layered nickelate La 5 ⁢Ni 3 ⁢O 11 with hybrid single-layer and bilayer stacking showed superconductivity under high pressure. This compound combines features of single-layer La 2 ⁢NiO 4 and bilayer La 3 ⁢Ni 2 ⁢O 7 , but its pairing mechanism remains to be understood. Motivated by this finding, here we report a comprehensive theoretical study of this system. Our density functional theory calculations reveal that the undistorted P4/mmm phase without pressure is unstable due to three distortion modes. As pressure increases, these modes are suppressed, leading to the high-symmetry P4/mmm phase without NiO 6 octahedron tilting. Moreover, the “charge transfer” between the single-layer and bilayer sublattices was observed, leading to hole doping in the single-layer blocks. Our random-phase approximation calculations indicate a leading 𝑑 𝑥 2 −𝑦 2 -wave pairing state that arises from spin-fluctuation scattering between Fermi surface states mainly originating from the single-layer blocks and additional weaker contributions from the bilayer blocks. These spin fluctuations could be detected by inelastic neutron scattering as a strong peak at 𝐪 = (𝜋,𝜋). Our findings distinguish La 5 ⁢Ni 3 ⁢O 11 from other nickelate superconductors discovered so far and the high-𝑇 𝑐 cuprates. We also discuss both similarities and differences between La 5⁢ Ni 3 ⁢O 11 and other hybrid stacking nickelates.

Zhang, Yang [Univ. of Tennessee, Knoxville, TN (Un↗

Supersonic jet screech tone cancellation

A new method of supersonic jet screech tone reduction is presented. The method utilizes a sound reflecting surface positioned upstream of the nozzle exit a distance of one-quarter wavelength of the fundamental screech tone. The reflector establishes a standing wave pattern of acoustic waves with a node at the nozzle exit plane. The pressure minimum at the exit halts the screech tone feedback mechanism. Experimental results indicate that the method eliminates supersonic jet screech as effectively as the currently accepted technique using an intrusive tab, but without distortion of the jet flow. The change in shock cell spacing, which occurs with an intrusive tab, does not occur when screech is cancelled with the new technique. The broadband shock-associated noise is also influenced much less when the jet screech tones are eliminated by the new method.

Nagel, R. T.↗

Three-dimensional airflow and hydrometeor trajectory calculation with applications

Numerical codes developed to model potential flows about three-dimensional bodies and applied to examining the flowfields around aircraft nose probes for gathering hydrometeor data are described. The potential flow code accounts for lifting or nonlifting surfaces, the effects of lift vorticity, inlet flows, and compression effects. Particle trajectories are calculated using particle equations of motion, with note taken of conditions in both the far- and near-fields of the flow. Graphic projections of the trajectories can be made from any view angle using another code. The codes also contain routines for handling flow velocities around arrays of spatial locations, trajectory arrays, and the effects of flow distortion on the particle flux.

Norment, H. G.↗

Tidal reorientation and the fracturing of Jupiter's moon Europa

The lineaments on Europa are discussed in terms of the orientation of the lineaments relative to the tensile stress trajectories due to tidal distortions and to nonsynchronous rotation. The cracks are noticeable by their darker albedo compared to the presumed water ice surrounding them. The stress trajectories for tidal distortion of a thin elastic shell are superimposed on Mercator projection maps of the lineaments. It is shown that the lineaments are mainly oriented at high angles to the tensile stress trajectories that would be expected for regularly occurring nonsynchronous rotation, i.e., extensional fractures would appear. The reorientation motions which would cause the fractures are estimated. It is suggested that the fractures occur episodically to release stresses built up on the tensile surface of the crust during the continuous nonsynchronous rotation of Europa.

Mcewen, A. S.↗