SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The use of polymer scaffolds in tissue engineering is reviewed and processing techniques are examined. The discussion of polymer-scaffold processing explains fiber bonding, solvent casting and particulate leaching, membrane lamination, melt molding, polymer/ceramic fiber composite-foam processing, phase separation, and high-pressure processing.
In September 2010, RTI and the DOE/NETL signed a cooperative agreement (DE-FE000489) to design, build, and operate a pre-commercial syngas cleaning system that would capture up to 90% of the CO 2 in the syngas slipstream, and demonstrate the ability to reduce syngas contaminants to meet DOE’s specifications for chemical production application. This pre-commercial syngas cleaning system is operated at Tampa Electric Company’s (TEC) 250-MWe integrated gasification combined cycle (IGCC) plant at Polk Power Station (PPS), located near Tampa, Florida. The syngas cleaning system consists of the following units: Warm Gas Desulfurization Process (WDP) - this unit processes a syngas flow equivalent of 50 MWe of power (50 MWe equivalent corresponds to about 2.0 MM scfh of syngas on dry basis) to produce a desulfurized syngas with a total sulfur (H 2 S+COS) concentration ~ 10 ppmv. Water Gas Shift (WGS) Reactor - this unit converts sufficient CO into CO 2 to enable 90% capture of the CO 2 in the syngas slipstream. This reactor uses conventional commercial shift catalyst technologies. Low Temperature Gas Cooling (LTGC) - this unit cools the syngas for the low temperature activated MDEA process and separates any condensed water. Activated MDEA Process (aMDEA) - this unit employs a non-selective separation for the CO 2 and H 2 S present in the raw syngas stream. Because of the selective sulfur removal by the upstream WDP unit, the CO 2 capture target of 90% CO 2 can be achieved with the added benefit that total sulfur concentration in the CO 2 product is < 100 ppmv. An additional advantage of the activated MDEA process is that the non-selective sulfur removal from the treated syngas reduces sulfur in the treated gas to very low sub-ppmv concentrations, which are required for chemical production applications. Testing to date of this pre-commercial syngas cleaning system has shown that the technology has great potential to provide clean syngas from coal and petcoke-based gasification at increased efficiency and at significantly lower capital and operating costs than conventional syngas cleanup technologies. However, before the technology can be deemed ready for scale-up to a full commercial-scale demonstration, additional R&D testing is needed at the site to address the following critical technical risks: WDP sorbent stability and performance; Impact of WDP on downstream cleanup and conversion steps; Metallurgy and refractory; Syngas cleanup performance and controllability; Carbon capture performance and additional syngas cleanup The proposed plan to acquire this additional R&D data involves: Operation of the units to achieve an additional 3,000 hours of operation of the system within the performance period, with a target of achieving 1,000 hours of those hours via continuous operation of the entire integrated pre-commercial demonstration system; Rapid turnaround of repairs and/or modifications required as necessary to return any specific unit to operating status with documentation and lessons learned to support technology maturation, and; Proactive performance of maintenance activities during any unplanned outages and if possible while operating.
This work reports an effective and scalable radiochemical separation process for isolating terbium from Gd 2 O 3 . The separation process uses three commercially available extraction chromatography resin columns, has been implemented on a computer-controlled chemistry module, and tested with 100 mg quantities of proton-irradiated nat Gd 2 O 3 . Here, the 4-hour separation procedure isolated radioterbium in 1.3 mL of 0.01 M HCl with 80 ±8% radiochemical yield and a Gd decontamination factor >(1.2 ± 0.3)·10 5 .
The following subjects are covered: Basic stages during computer processing of data from Sneg-2MP instrument, basic modes during separation and fast processing (separation of data during satellite flight, separation of burst data segments, sampling and analysis of initial burst data segment). Experimental results obtained on the basis of fast processed data are reported.
Industrial rare earth element (REE) separation facilities utilize acidic cation exchange ligands such as 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (PC88A) for solvent extraction processes. REE separations are costly and difficult due to their chemical similarities and subsequent low separation factors. Several empirical correlations are available in the literature to predict steady state extraction equilibria for various solvent systems. However, complete solvent extraction flowsheet design for REE separations requires complex scrubbing and stripping circuits to separate and produce individual pure species. Furthermore, the sensitive process chemistry is susceptible to process upsets and may manifest as irreversible transients that complicate startup and continuous operation of a solvent extraction plant. Thus, dynamic modeling of REE separations will aid in process design, optimization, and management of process fluctuations. A time-dependent MATLAB/SIMULINK modeling framework has been developed for REE solvent extraction processes using laboratory equilibrium data. The model was used to develop a flowsheet that produced high purity neodymium from a 25 wt% praseodymium and 75 wt% neodymium feed. Laboratory mixer-settlers were used to verify and validate model performance. Results indicated that the model reasonably predicts the dynamic behavior of a counter-current REE separation process, and accurately predicts the steady state REE concentration profiles across the cascade. The modeling framework can be applied to any REE separation or solvent system provided adequate laboratory equilibrium data are available.
A circulating moving bed and process for separating a carbon dioxide from a gas stream is disclosed. The circulating moving bed can include an adsorption reactor and a desorption reactor, and a sorbent that moves through the two reactors. The sorbent can enter the adsorptive reactor and one end and move to an exit point distal to its entry point, while a CO.sub.2 feed stream can enter near the distal point and move countercurrently through the sorbent to exit at a position near the entry point of the sorbent. The sorbent can adsorb the CO.sub.2 by concentration swing adsorption and adsorptive displacement. The sorbent can then transfer to a regeneration reactor and can move countercurrently against a flow of steam through the regeneration reactor. The sorbent can be regenerated and the carbon dioxide recaptured by desorbing the carbon dioxide from the sorbent using concentration swing desorption and desorptive displacement with steam.
A rotary moving bed and process for separating a carbon dioxide from a gas stream is disclosed. The rotary moving bed can have a rotational assembly rotating on a vertical axis, and a plurality of sorbent cells positioned horizontally to the axis of rotation that fills a vertical space in the moving bed, where the sorbent cells adsorb the carbon dioxide by concentration swing adsorption and adsorptive displacement. The sorbent can be regenerated and the carbon dioxide recaptured by desorbing the carbon dioxide from the sorbent using concentration swing adsorption and desorptive displacement with steam. The gas flows in the system flow in a direction horizontal to the axis of rotation and in a direction opposite the rotational movement of the sorbent cells.
Advances in process innovation within the chemical process industry are impeded by the cost of producing new innovative components. In this paper, various manufacturing process routes were evaluated for scaling up a micro-scale liquid-liquid extractor and multi-phase separator capable of separating immiscible phases that are used for the extraction of a chemical product into a lower boiling point solvent to make downstream distillation easier. A manufacturing process design methodology was used to evaluate both photochemical machining and binder jetting as a means for producing the micropost arrays within the separator. Cost curves show that for a 0.3 mm deep micropost array, photochemical machining was found to be much cheaper than binder jetting. However, because binder jetting processes enable microposts with over 13 times higher depth-to-width aspect ratios, binder jetting was found to decrease the overall costs of the extractor/separator by more than half for a 500 barrel per day plant, with breakeven as low as 15 barrels per day. These economics were confirmed by building extractor/separator plates and characterizing them dimensionally and functionally. The binder jet plates were found to perform better than photochemical plates leading to the complete separation of the organic phase from water. The utilization of slower sintering cycles combined with surface grinding provided acceptable dimensional tolerances for the binder jet plates. Using pressurized air during depowdering improved the economics for the binder jetting process.
Partitioning and transmutation schemes, where americium is separated from other components of used nuclear fuel and burned in a fast neutron reactor, offer a path to dramatically decrease the space requirements for storage of nuclear fuel cycle wastes, allowing more efficient usage of potentially scarce storage resources.[1] Improvements in the efficiency of processes for separating americium from used nuclear fuels can thus have a significant impact on the costs of future nuclear fuel cycles. Understanding separation ligand radiation chemistry is important for development of new ligands and processes, as the ligand degradation products can have a deleterious effect on a separation process. Tetraoctyl diglycolamide (TODGA) has been studied as a ligand for lanthanide/minor actinide extraction for partitioning and transmutation schemes. However, the mechanism of initial energy transfer from products of solvent radiolysis to TODGA is still under debate. One proposed mechanism is attack by a n-dodecane radical cation resulting in electron abstraction and formation of a TODGA radical cation,[2] while later work has proposed hydrogen abstraction from sites adjacent to the central ether oxygen by other radical species.[3] The latter mechanism is proposed to result in degradation products from rupture of the ether bond. However, radiolytic degradation of TODGA in n-dodecane shows products that would result from rupture of all the backbone bonds. There is little information on what degradation products would be expected to form from the TODGA radical cation. In this work, we have begun to investigate this by examining the electron impact (EI) ionization mass spectrum of TODGA, which initially produces a TODGA radical cation in the gas phase. The EI spectrum shows fragments that would result from most backbone bond cleavages, similar to what is observed in the radiolysis of TODGA in n-dodecane. As the lifetime of the solvent radical cation decreases from n-dodecane to n-hexane,[4] irradiation of TODGA in n-hexane should have less solvent radical cations available for reaction with TODGA, and instead should favor reactions with longer-lived radicals. In contrast to n-dodecane, radiolytic degradation of TODGA in n-hexane produces only N,N-dioctylacetamide, which would result from rupture of the ether bond. The n-dodecane radical cation lifetime is long enough to produce TODGA radical cations but the n-hexane radical cation is mostly consumed before reaction with TODGA, so other radical processes that abstract hydrogen from TODGA dominate. This suggests that electron abstraction by the n-dodecane radical cation is an important component of TODGA radiolysis, although it does not rule out the presence of mechanisms involving hydrogen abstraction adjacent to the ether oxygen. References [1] J. Serp et al., Energies 2017, 10 (9), DOI: 10.3390/en10091445. [2] C. Zarzana et al., Solvent Extr. Ion Exch. 2015, 33 (5), 431–447, DOI: 10.1080/07366299.2015.1012885. [3] T. Koubský et al., Prog. Nucl. Energy 2017, 94, 208–215, DOI: 10.1016/j.pnucene.2016.07.010. [4] F. Sviridenko et al., Chem. Phys. Lett. 1998, 297 (3), 343–349, DOI: 10.1016/S0009-2614(98)01099-9.
The Chartherm process (Thermya, Bordeaux, France) is a thermochemical conversion process to treat chromated copper arsenate (CCA) impregnated wood waste. The process aims at maximum energy valorization and material recuperation by combining the principles of low-temperature slow pyrolysis and distillation in a smart way. The main objective of the exergy analysis presented in this paper is to find the critical points in the Chartherm process where it is necessary to apply some measures in order to reduce exergy consumption and to make energy use more economic and efficient. It is found that the process efficiency can be increased with 2.3-4.2% by using the heat lost by the reactor, implementing a combined heat and power (CHP) system, or recuperating the waste heat from the exhaust gases to preheat the product gas. Furthermore, a comparison between the exergetic performances of a 'chartherisation' reactor and an idealized gasification reactor shows that both reactors destroy about the same amount of exergy (i.e. 3500 kW kg{sub wood}{sup -1}) during thermochemical conversion of CCA-treated wood. However, the Chartherm process possesses additional capabilities with respect to arsenic and tar treatment, as well as the extra benefit of recuperating materials.
Highlights: Black-Right-Pointing-Pointer Review focuses on bio-extraction of metals from solid wastes of industries and consumer goods. Black-Right-Pointing-Pointer Bio-processing of certain effluents/wastewaters with metals is also included in brief. Black-Right-Pointing-Pointer Quantity/composition of wastes are assessed, and microbes used and leaching conditions included. Black-Right-Pointing-Pointer Bio-recovery using bacteria, fungi and archaea is highlighted for resource recycling. Black-Right-Pointing-Pointer Process methodology/mechanism, R and D direction and scope of large scale use are briefly included. - Abstract: Metal containing wastes/byproducts of various industries, used consumer goods, and municipal waste are potential pollutants, if not treated properly. They may also be important secondary resources if processed in eco-friendly manner for secured supply of contained metals/materials. Bio-extraction of metals from such resources with microbes such as bacteria, fungi and archaea is being increasingly explored to meet the twin objectives of resource recycling and pollution mitigation. This review focuses on the bio-processing of solid wastes/byproducts of metallurgical and manufacturing industries, chemical/petrochemical plants, electroplating and tanning units, besides sewage sludge and fly ash of municipal incinerators, electronic wastes (e-wastes/PCBs), used batteries, etc. An assessment has been made to quantify the wastes generated and its compositions, microbes used, metal leaching efficiency etc. Processing of certain effluents and wastewaters comprising of metals is also included in brief. Future directions of research are highlighted.
This program is proceeding along the lines compatible with the objective of developing feasible separation and recovery processes for precious metals in a space environment. Efficient, compact, solvent extraction systems (both single and multistage) capable of high selectivity and rapid equilibration that are based on chelate and ion pair complexes are being explored. Two research projects were undertaken: (1) study of the time-dependent aspects of the formation of Pd(2) extractable chelate complexes; and (2) development of a multistage countercurrent distribution process for the separation and recovery of Pd(2) and Pt(2) ions.
In many industries there has recently been a concerted movement toward 'quality management' and the issue of how to accomplish work more efficiently. Part of this effort is focused on concurrent engineering; the idea of integrating the design and analysis processes so that they are not separate, sequential processes (often involving design rework due to analytical findings) but instead form an integrated system with smooth transfers of information. Presented herein are several specific examples of concurrent engineering methods being carried out at Langley Research Center (LaRC): integration of thermal, structural and optical analyses to predict changes in optical performance based on thermal and structural effects; integration of the CAD design process with thermal and structural analyses; and integration of analysis and presentation by animating the thermal response of a system as an active color map -- a highly effective visual indication of heat flow.
As the traffic demand continues to grow within the National Airspace System (NAS), the need for long-range planning (30 minutes plus) of arrival traffic increases greatly. Research into air traffic control (ATC) automation at ARC has led to the development of the Center-TRACON Automation System (CTAS). CTAS determines optimum landing schedules for arrival traffic and assists controllers in meeting those schedules safely and efficiently. One crucial element in the development of CTAS is the capability to perform long-range (20 minutes) and short-range (5 minutes) conflict prediction and resolution once landing schedules are determined. The determination of conflict-free trajectories within the Center airspace is particularly difficult because of large variations in speed and altitude. The paper describes the current design and implementation of the conflict prediction and resolution tools used to generate CTAS advisories in Center airspace. Conflict criteria (separation requirements) are defined and the process of separation prediction is described. The major portion of the paper will describe the current implementation of CTAS conflict resolution algorithms in terms of the degrees of freedom for resolutions as well as resolution search techniques. The tools described in this paper have been implemented in a research system designed to rapidly develop and evaluate prototype concepts and will form the basis for an operational ATC automation system.
Humics, Inc. already had patented their process for separating wet peat into components and processing it when they consulted NERAC regarding possible applications. The NERAC search revealed numerous uses for humic acid extracted from peat. The product improves seed germination, stimulates root development, and improves crop yields. There are also potential applications in sewage disposal and horticultural peat, etc.
The debris produced by a nuclear explosion forms a hazard to response, can serve as a record used to interpret the event, and may persist in the environment necessitating long term management. Hence, understanding the radiochemical inventory of nuclear debris remains an important area of study, particularly the behavior and resulting distribution of actinides and fission products. Despite formation in a high energy environment, it has been recognized for decades that the chemical and isotopic composition of debris rarely, if ever, captures a homogenized blend of the bomb products. Instead, during cooling and debris formation, a variety of chemical processes cause separation of the different constituents. This process of chemical fractionation creates debris with a variety of different radionuclide inventories. Here we provide an overdue re-examination of our historic basis for understanding chemical fractionation in nuclear explosions through the context of new characterization of a large set of historical nuclear test data. Finally, we then discuss the implications of our findings for advancing models of radionuclide distribution and postdetonation chemical fractionation.
This article describes p-n heterostructured water-borne semiconductor naonoparticles (NPs) with unique surface structures via control of shell morphology. The shell particles, comprising PC60-PC61BM composite, having n-type semiconductor characteristic, notably influence the charge carrier behavior in the core-shell NPs. A one- or two-phase methodology based on a PC60 surfactant-water phase and PC61BM n-type semiconductor-organic phase provided highly specific control over the shell structure of the NPs, which promoted their superior charge separation ability when combined with poly-3-hexyl-thiophene (P3HT). Moreover, the resulting water-borne NPs exhibit shell morphology-dependent carrier quenching and stability, which was characterized via luminescence studies paired with structural analysis. Corresponding to the results, outstanding performances of photovoltaic cells with over 5 % efficiency were achieved. The results suggest that the surrounding shell environments, such as the shell structure, and its electronic charge density, were crucial in determining the overall activity of the core-shell p-n heterostructured NPs. Thus, this work provides a new protocol in the current fields of water-based organic semiconductor colloids.
Currently, cryogenic condensation is the predominant process for recovering ammonia (NH 3 ) in the Haber-Bosch (HB) process, which is highly energy intensive. To be more compatible with the reaction conditions in the HB process and thus minimize the pressure and temperature swing during reactant recycling, energy-efficient technologies for NH 3 extraction at elevated temperature and pressure are greatly needed. In this work, the Na + -gated nanochannel membrane, shown exclusively for water conduction in our previous work, also exhibited highly NH 3 -selective performance, with NH 3 /H 2 selectivity as high as 4,280 and NH 3 /N 2 selectivity > 10,000 at temperature up to 250 °C and pressure up to 35 bar. Excellent stability of the Na + -gated nanochannel membrane was demonstrated during a 100-h run in ternary NH 3 /H 2 /N 2 gas mixture at 200 °C and 35 bar, consistent with structural characterization by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Fourier transfer infrared (FTIR) spectroscopy. A techno-economic analysis (TEA) was conducted for the HB process using the Na + -gated nanochannel membrane and the traditional HB process with condenser. Finally, under the optimized separation conditions, > 80% energy savings and approximately 20% reduction of the net NH 3 production cost can be achieved, demonstrating the great potential of the Na + -gated nanochannel membrane for NH 3 separation in the HB process.