Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

A high-stability scanning tunneling microscope achieved by an isolated tiny scanner with low voltage imaging capability

We present a novel homebuilt scanning tunneling microscope (STM) with high quality atomic resolution. It is equipped with a small but powerful GeckoDrive piezoelectric motor which drives a miniature and detachable scanning part to implement coarse approach. The scanning part is a tiny piezoelectric tube scanner (industry type: PZT-8, whose d{sub 31} coefficient is one of the lowest) housed in a slightly bigger polished sapphire tube, which is riding on and spring clamped against the knife edges of a tungsten slot. The STM so constructed shows low back-lashing and drifting and high repeatability and immunity to external vibrations. These are confirmed by its low imaging voltages, low distortions in the spiral scanned images, and high atomic resolution quality even when the STM is placed on the ground of the fifth floor without any external or internal vibration isolation devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mn concentration dependent structural and optical properties of a-plane Zn{sub 0.99-x}Mn{sub x}Na{sub 0.01}O

Non-polar a-plane (112{sup ¯}0) Zn{sub 0.99−x}Mn{sub x}Na{sub 0.01}O (x = 0, 0.02, 0.03, 0.04, and 0.05) thin films have been prepared on r-plane (112{sup ¯}0) sapphire substrates by pulsed laser deposition (PLD). The influences of Mn content on the structural and optical properties of the films have been studied. It is indicated that moderate Mn doping facilitates the non-polar growth of ZnO, and all the doped films are single phase with a hexagonal wurtzite structure. The transmittance spectra suggested that all films are transparent in the visible region exhibiting a transmittance above 80%. Mn{sup 2+} doped Zn{sub 0.99}Na{sub 0.01}O shows an initial decrease of optical band gap (OBG) for small concentration of Mn, followed by a monotonic increase. The anomalous decrease in OBG for low concentrations of Mn is attributed to the strong exchange interaction present between the sp electrons of the host matrix and d electrons of Mn. Emission studies were also performed showing suppressed blue-shifted ultraviolet band and dominant violet-blue bands, which might originate from the zinc vacancy (V{sub Zn}) and zinc interstitial (Zn{sub i}) defects. The intensity of defect-related emission peaks is Mn doping-level-dependent as well and the results coincide well with that from the structural analyses.

36 MATERIALS SCIENCE↗

Q-factor of (In,Ga)N containing III-nitride microcavity grown by multiple deposition techniques

A 3λ/2 (In,Ga)N/GaN resonant cavity, designed for ∼415 nm operation, is grown by molecular beam epitaxy and is sandwiched between a 39.5-period (In,Al)N/GaN distributed Bragg reflector (DBR), grown on c-plane GaN-on-sapphire pseudo-substrate by metal-organic vapor phase epitaxy and an 8-period SiO{sub 2}/ZrO{sub 2} DBR, deposited by electron beam evaporation. Optical characterization reveals an improvement in the cavity emission spectral purity of approximately one order of magnitude due to resonance effects. The combination of spectrophotometric and micro-reflectivity measurements confirms the strong quality (Q)-factor dependence on the excitation spot size. We derive simple analytical formulas to estimate leak and residual absorption losses and propose a simple approach to model the Q-factor and to give a quantitative estimation of the weight of cavity disorder. The model is in good agreement with both transfer-matrix simulation and the experimental findings. We point out that the realization of high Q-factor (In,Ga)N containing microcavities on GaN pseudo-substrates is likely to be limited by the cavity disorder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films

Laser-induced periodic surface structures (LIPSSs) and chemical composition changes of Ti-based nanolayered thin films (Al/Ti, Ni/Ti) after femtosecond (fs) laser pulses action were studied. Irradiation is performed using linearly polarized Ti:Sapphire fs laser pulses of 40 fs pulse duration and 800 nm wavelength. The low spatial frequency LIPSS (LSFL), oriented perpendicular to the laser polarization with periods slightly lower than the irradiation wavelength, was typically formed at elevated laser fluences. On the contrary, high spatial frequency LIPSS (HSFL) with uniform period of 155 nm, parallel to the laser light polarization, appeared at low laser fluences, as well as in the wings of the Gaussian laser beam distribution for higher used fluence. LSFL formation was associated with the material ablation process and accompanied by the intense formation of nanoparticles, especially in the Ni/Ti system. The composition changes at the surface of both multilayer systems in the LSFL area indicated the intermixing between layers and the substrate. Concentration and distribution of all constitutive elements in the irradiated area with formed HSFLs were almost unchanged.

36 MATERIALS SCIENCE↗

Magnetic and microwave properties of U-type hexaferrite films with high remanence and low ferromagnetic resonance linewidth

U-type barium hexaferrite films (Ba{sub 4}Ni{sub 1.4}Co{sub 0.6}Fe{sub 36}O{sub 60}) were deposited on (0001) sapphire substrates by pulsed laser deposition. Microstructure and magnetic properties of the films were characterized by X-ray diffraction, scanning electron microscopy and vibrating sample magnetometry. Ferromagnetic resonance (FMR) measurements were performed at X-band. The results indicate an anisotropy field of ∼8 kOe, and the saturation magnetization (4πM{sub s}) of ∼3.6 kG. An optimal post-deposition annealing of films results in a strong (0 0 n) crystallographic texture and a high hysteresis loop squareness (M{sub r}/M{sub s} = 92%) leading to self biased properties. Furthermore, the highly self-biased ferrite films exhibited an FMR linewidth of ∼200 Oe. The U-type hexaferrite films having low microwave loss, low magnetic anisotropy field, and high squareness are a suitable alternative to Sc or In doped BaM ferrites that have been the choice material for self-biased microwave devices at X-band frequencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of substrate temperature on the magnetic properties of epitaxial sputter-grown Co/Pt

Epitaxial Co/Pt films have been deposited by dc-magnetron sputtering onto heated C-plane sapphire substrates. X-ray diffraction, the residual resistivity, and transmission electron microscopy indicate that the Co/Pt films are highly ordered on the atomic scale. The coercive field and the perpendicular magnetic anisotropy increase as the substrate temperature is increased from 100–250 °C during deposition of the Co/Pt. Measurement of the domain wall creep velocity as a function of applied magnetic field yields the domain wall pinning energy, which scales with the coercive field. Evidence for an enhanced creep velocity in highly ordered epitaxial Co/Pt is found.

36 MATERIALS SCIENCE↗

Optical and structural characterization of nitrogen-rich InN: Transition from nearly intrinsic to strongly n-type degenerate with temperature

We report on a detailed study of the structural and optical properties of nonstoichiometric nitrogen-rich InN grown on sapphire substrates, by migration enhanced afterglow deposition. The samples were polycrystalline, with the presence of InN dots. Unusually strong photoluminescence emission was measured at cryogenic temperatures, with the peak energy at ∼0.68 eV. Detailed analysis further shows that the sample has very low residual electron density in the range of ∼10{sup 16} cm{sup −3} at temperatures below 20 K.

36 MATERIALS SCIENCE↗

Optical phonon modes in Al{sub 1−x}Sc{sub x}N

Optical phonons are measured to probe the origins of the reported anomalously high piezoelectric response in aluminum scandium nitride (Al{sub 1−x}Sc{sub x}N). Epitaxial layers with 0 ≤ x ≤ 0.16 deposited on sapphire(0001) exhibit a refractive index below the band gap, which increases from 2.03 for x = 0 to 2.16 for x = 0.16, corresponding to a dielectric constant ε{sub ∞} = 4.15 + 3.2x. Raman scattering shows that zone-center E{sub 2}(H) and A{sub 1}(TO) phonon modes shift to lower frequencies with increasing x, following linear relationships: ω(E{sub 2}(H)) = 658–233x (cm{sup −1}) and ω(A{sub 1}(TO)) = 612–159x (cm{sup −1}). Similarly, zone-center E{sub 1}(TO) and A{sub 1}(LO) phonon mode frequencies obtained from specular polarized infrared reflectance measurements red-shift to ω(E{sub 1}(TO)) = 681–209x (cm{sup −1}) and ω(A{sub 1}(LO)) = 868–306x (cm{sup −1}). The measured bond angle decreases linearly from 108.2° to 106.0°, while the length of the two metal-nitrogen bonds increase by 3.2% and 2.6%, as x increases from 0 to 0.16. This is associated with a 3%–8% increase in the Born effective charge and a simultaneous 6% decrease in the covalent metal-N bond strength, as determined from the measured vibrational frequencies described with a Valence-Coulomb-Force-Field model. The overall results indicate that bonding in Al-rich Al{sub 1−x}Sc{sub x}N qualitatively follows the trends expected from mixing wurtzite AlN with metastable hexagonal ScN. However, extrapolation suggests non-linear composition dependencies in bond angle, length, and character for x ≥ 0.2, leading to a structural instability that may be responsible for the reported steep increase in the piezoelectric response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tailoring dielectric properties of ferroelectric-dielectric multilayers

We develop a nonlinear thermodynamic model for multilayer ferroelectric heterostructures that takes into account electrostatic and electromechanical interactions between layers. We concentrate on the effect of relative layer fractions and in-plane thermal stresses on dielectric properties of Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3}-, BaTiO{sub 3}-, and PbZr{sub 0.2}Ti{sub 0.8}O{sub 3} (PZT)-SrTiO{sub 3} (STO) multilayers on Si and c-sapphire. We show that dielectric properties of such multilayers can be significantly enhanced by tailoring the growth/processing temperature and the STO layer fraction. Our computations show that large tunabilities (∼90% at 400 kV/cm) are possible in carefully designed barium strontium titanate-STO and PZT-STO even on Si for which there exist substantially large in-plane strains.

36 MATERIALS SCIENCE↗

High Mg-content wurtzite MgZnO alloys and their application in deep-ultraviolet light-emitters pumped by accelerated electrons

High Mg-content single-phase wurtzite MgZnO alloys with a bandgap of 4.35 eV have been obtained on sapphire substrate by introducing a composition-gradient Mg{sub x}Zn{sub 1−x}O buffer layer. By employing the accelerated electrons obtained in a solid-state structure as an excitation source, an emission at around 285 nm, which is originated from the near-band-edge emission of the Mg{sub 0.51}Zn{sub 0.49}O active layer, has been observed. The results reported in this paper may provide a promising route to high performance deep-ultraviolet light-emitting devices by bypassing the challenging doping issues of wide bandgap semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect reduction in Si-doped Al{sub 0.45}Ga{sub 0.55}N films by SiN{sub x} interlayer method

The dislocation density in AlGaN epitaxial layers with Al content as high as 45% grown on sapphire substrates has been effectively reduced by introducing an in-situ deposited SiN{sub x} nanomask layer in this study. By closely monitoring the evolution of numerous material properties, such as surface morphology, dislocation density, photoluminescence, strain states, and electron mobility of the Si-Al{sub 0.45}Ga{sub 0.55}N layers as the functions of SiN{sub x} interlayer growth time, the surface coverage fraction of SiN{sub x} is found to be a crucial factor determining the strain states and dislocation density. The dependence of the strain states and the dislocation density on the surface coverage fraction of SiN{sub x} nanomask supports the very different growth models of Al-rich AlGaN on SiN{sub x} interlayer due to the reduced nucleation selectivity compared with the GaN counterpart. Compared with GaN, which can only nucleate at open pores of SiN{sub x} nanomask, Al-rich AlGaN can simultaneously nucleate at both open pores and SiN{sub x} covered areas. Dislocations will annihilate at the openings due to the 3D growth initiated on the opening area, while 2D growth mode is preserved on SiN{sub x} and the threading dislocations are also preserved. During the following growth process, lateral overgrowth will proceed from the Al{sub 0.45}Ga{sub 0.55}N islands on the openings towards the regions covered by SiN{sub x}, relaxing the compressive strain and bending the dislocations at the same time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarity characterization by anomalous x-ray dispersion of ZnO films and GaN lateral polar structures

We demonstrate the use of anomalous x-ray scattering of constituent cations at their absorption edge, in a conventional Bragg-Brentano diffractometer, to measure absolutely and quantitatively the polar orientation and polarity fraction of unipolar and mixed polar wurtzitic crystals. In one set of experiments, the gradual transition between c+ and c− polarity of epitaxial ZnO films on sapphire as a function of MgO buffer layer thickness is monitored quantitatively, while in a second experiment, we map the polarity of a lateral polar homojunction in GaN. The dispersion measurements are compared with piezoforce microscopy images, and we demonstrate how x-ray dispersion and scanning probe methods can provide complementary information that can discriminate between polarity fractions at a material surface and polarity fractions averaged over the film bulk.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced catalyst-free nucleation of GaN nanowires on amorphous Al{sub 2}O{sub 3} by plasma-assisted molecular beam epitaxy

We report on plasma-assisted molecular beam epitaxial growth of GaN nanowires (NWs) on Si(111) substrates with a thin amorphous Al{sub 2}O{sub 3} buffer layer deposited by atomic layer deposition. Comparison of nucleation kinetics shows that presence of amorphous Al{sub 2}O{sub 3} buffer significantly enhances spontaneous nucleation of GaN NWs. Slower nucleation was observed on partially amorphous silicon nitride films. No growth of NWs was found on sapphire substrate under the same growth conditions which we explain by a low density of defects on monocrystalline substrate surface where NWs may nucleate. Our finding shows that tuning of substrate microstructure is an efficient tool to control rate of self-induced nucleation of GaN NWs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum corrections to temperature dependent electrical conductivity of ZnO thin films degenerately doped with Si

ZnO thin films degenerately doped with Si (Si{sub x}Zn{sub 1−x}O) in the concentrations range of ∼0.5% to 5.8% were grown by sequential pulsed laser deposition on sapphire substrates at 400 °C. The temperature dependent resistivity measurements in the range from 300 to 4.2 K revealed negative temperature coefficient of resistivity (TCR) for the 0.5%, 3.8%, and 5.8% doped Si{sub x}Zn{sub 1−x}O films in the entire temperature range. On the contrary, the Si{sub x}Zn{sub 1−x}O films with Si concentrations of 1.0%, 1.7%, and 2.0% showed a transition from negative to positive TCR with increasing temperature. These observations were explained using weak localization based quantum corrections to conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nondegenerate parametric generation of 2.2-mJ, few-cycle 2.05-μm pulses using a mixed phase matching scheme

We describe the production of 2.2-mJ, ∼6 optical-cycle-long mid-infrared laser pulses with a carrier wavelength of 2.05 μm in a two-stage β-BaB{sub 2}O{sub 4} nondegenerate optical parametric amplifier design with a mixed phase matching scheme, which is pumped by a standard Ti:sapphire chirped-pulse amplification system. It is demonstrated that relatively high pulse energies, short pulse durations, high stability, and excellent beam profiles can be obtained using this simple approach, even without the use of optical parametric chirped-pulse amplification.

74 ATOMIC AND MOLECULAR PHYSICS↗

Transport and optical properties of c-axis oriented wedge shaped GaN nanowall network grown by molecular beam epitaxy

The transport and optical properties of wedge-shaped nanowall network of GaN grown spontaneously on cplane sapphire substrate by Plasma-Assisted Molecular Beam Epitaxy (PAMBE) show interesting behavior. The electron mobility at room temperature in these samples is found to be orders of magnitude higher than that of a continuous film. Our study reveals a strong correlation between the mobility and the band gap in these nanowall network samples. However, it is seen that when the thickness of the tips of the walls increases to an extent such that more than 70% of the film area is covered, it behaves close to a flat sample. In the sample with lower surface coverage (≈40% and ≈60%), it was observed that the conductivity, mobility as well as the band gap increase with the decrease in the average tip width of the walls. Photoluminescence (PL) experiments show a strong and broad band edge emission with a large (as high as ≈ 90 meV) blue shift, compared to that of a continuous film, suggesting a confinement of carriers on the top edges of the nanowalls. The PL peak width remains wide at all temperatures suggesting the existence of a high density of tail states at the band edge, which is further supported by the photoconductivity result. The high conductivity and mobility observed in these samples is believed to be due to a “dissipation less” transport of carriers, which are localized at the top edges (edge states) of the nanowalls.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of dislocations in III-Nitrides

Research on GaN, AlN, InN (III-N) and their alloys is achieving new heights due their high potential applications in photonics and electronics. III-N semiconductors are mostly grown epitaxially on sapphire, and due to the large lattice mismatch and the differences in the thermal expansion coefficients, the structures usually contain many threading dislocations (TDs). While their structural properties have been widely investigated, their electrical characteristics and their role in the transport properties of the devices are still debated. In the present contribution we will show conductive AFM studies of TDs in GaN and Al/In GaN ternary alloys to evidence the role of strain, different surface polarity and composition on their electrical properties. Local I-V curves measured at TDs allowed us to clarify their role in the macroscopic electrical properties (leakage current, mobilities) of III-N based devices. Samples obtained by different growers (AIXTRON, III-V Lab) were studied. The comparison between the results obtained in the different alloys allowed us to understand the role of In and Al on the TDs electrical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of growth temperature on defects in epitaxial GaN film grown by plasma assisted molecular beam epitaxy

We report the effect of growth temperature on defect states of GaN epitaxial layers grown on 3.5 μm thick GaN epi-layer on sapphire (0001) substrates using plasma assisted molecular beam epitaxy. The GaN samples grown at three different substrate temperatures at 730, 740 and 750 °C were characterized using atomic force microscopy and photoluminescence spectroscopy. The atomic force microscopy images of these samples show the presence of small surface and large hexagonal pits on the GaN film surfaces. The surface defect density of high temperature grown sample is smaller (4.0 × 10{sup 8} cm{sup −2} at 750 °C) than that of the low temperature grown sample (1.1 × 10{sup 9} cm{sup −2} at 730 °C). A correlation between growth temperature and concentration of deep centre defect states from photoluminescence spectra is also presented. The GaN film grown at 750 °C exhibits the lowest defect concentration which confirms that the growth temperature strongly influences the surface morphology and affects the optical properties of the GaN epitaxial films.

36 MATERIALS SCIENCE↗