Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Renewables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Overview of Nasa's Watts on the Moon Challenge Phase 1

As NASA works to extend human exploration of the solar system, unprecedented capacity for electrical and thermal energy will be needed to support sustained human presence and the beginning of industrial activity on the Moon. Solar energy is abundant on the lunar surface but extended night hours (up to 350 consecutive hours) and extreme temperature change from daylight to nighttime operation creates complexity for solar power use. Analogous issues arise on Earth, where demand for additional renewable energy generation, including solar, is rising, but better power management, distribution, and energy storage solutions are needed to address intermittency and resiliency, among other issues. To accelerate the development of technologies for power distribution and energy storage that can operate in extreme lunar conditions, NASA’s Centennial Challenges Program launched the Watts on the Moon Challenge in September 2020. Submissions for Phase 1 of the challenge were due in March 2021 and winners were announced in May 2021. This paper provides an overview of the challenge, key technical requirements, outcomes from Phase 1, and an update on Phase 2 of the challenge, which is currently ongoing.

Denise P. Morris↗
NASA NTRSDate not supplied

Enabling Evaluation of In-Situ Regolith-Based Construction Materials with Modified Methods for Testing Compressive Strength of Non-Cement Mortar Specimens Using Simulants & Analog Site Soils

Objectives for Phase II of NASA’s Artemis Program include establishment of lunar surface infrastructure to support a sustainable, long-term human presence on the Moon. Terrestrially, awareness of climate impacts from cement and concrete production has led to renewed interest in traditional building materials using earthen and pozzolanic binders with locally sourced aggregates [1, 2, 3]. In remote, austere,and resource-constrained environments, use of site-sourced materials is often an economic necessity in addition to being valuable for local autonomy and self-sufficiency. This study evaluates modifications to ASTM cement mortar testing methods, incorporating details from European standards for earthen plasters and lime-based mortars. Development of consistent, simplified methods for evaluating in-situ materials will be essential not only for meeting future climate goals and sustainable construction needs, but also for conducting autonomous robotic manipulation and evaluation of regolith construction materials.

ISRU↗
NASA NTRSDate not supplied

Kennedy Space Center’s Energy and Water Conservation Program

America Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Space Coast Section - Our presenter will be Jennifer Hill, PE, LEED AP, Energy Manager for NASA at Kennedy Space Center. Ms. Hill will present on the NASA KSC Energy Program, providing an overview of KSC’s energy program and of projects that have been implemented to reduce energy and water intensity, increase renewable energy usage, and to improve resilience in support of the NASA KSC Mission.

Jennifer Hill↗
NASA NTRS2023

Manufacturing and Mechanical Testing of TC1225/LM-PAEK and TC1200/PEEK Thermoplastic Composite Panels

Development of thermoplastic composites (TPCs) for aerospace structures is experiencing renewed enthusiasm attributed to the availability of rapid manufacturing technology, ease of joining through fusion welding processes, and the successful utilization of the material in flight critical structures. Semicrystalline thermoplastics such as polyether ether ketone (PEEK), polyether ketone ketone (PEKK), and polyphenylene sulfide (PPS) have been successfully demonstrated as thermoplastic skins, keel beams, and angle brackets for commercial aircraft. Composite specimens were fabricated from the Toray TC1225 and TC1200 unidirectional prepreg systems and tested to gain confidence with NASA in-house TPC processing as part of the Thermoplastics Development for Exploration Application (TDEA) project. TC1225 is a relatively new material system that uses T700GC fibers and low-melt polyaryl ether ketone (LM-PAEK) resin. TC1200 is the latest version of a material system that has been available for several decades with AS4 fibers and PEEK resin. Results for ultrasonic inspection, optical microscopy, acid digestion, and differential scanning calorimetry establish the quality of the panels. Mechanical test data for unnotched and notched laminate tension and compression as well as compression after impact provide data for equivalency assessment and support material selection in TDEA. Satisfactory equivalence of the TC1225 results and the National Center for Advanced Materials Performance (NCAMP) database was found. The results indicate high-quality manufacturing was achieved, and the resulting mechanical test data are in agreement with that in the literature.

Thermoplastic Composites↗
NASA NTRSDate not supplied

ENABLING ARCHITECTURE TRADES AND DESIGN EXPLORATION FOR NUCLEAR ELECTRIC PROPULSION

Recent renewed interest in Nuclear Electric Propulsion (NEP) at NASA has driven the need for design space exploration and analysis of alternative architectures to evaluate performance and feasibility of NEP concepts. It has been over a decade since NASA last invested in Nuclear Electric Propulsion development efforts, and the landscape has shifted in both mission objectives and technology readiness levels. This also means that many of the engineering analyses and design frameworks tailored to NEP date back to the Jupiter Icy Moons Orbiter (JIMO) days of the early 2000s. Thus, a need was identified for updating and modernizing the modeling and simulation toolsets for NEP. This paper will detail the development efforts in the Marshall Space Flight Center’s Advanced Concepts Office, with a particular focus on the development of the NEP stage of the NEP-Chem vehicle. The paper will cover the various models used, and their current development status, as well as provide an overview of the integrated vehicle model and plans for further development.

Nuclear↗
NASA NTRS2022

Contribution of Spicules to Solar Coronal Emission

Recent high-resolution imaging and spectroscopic observations have generated renewed interest in spicules' role in explaining the hot corona. Some studies suggest that some spicules, often classified as type II, may provide significant mass and energy to the corona. Here we use numerical simulations to investigate whether such spicules can produce the observed coronal emission without any additional coronal heating agent. Model spicules consisting of a cold body and hot tip are injected into the base of a warm (0.5 MK) equilibrium loop with different tip temperatures and injection velocities. Both piston- and pressure-driven shocks are produced. We find that the hot tip cools rapidly and disappears from coronal emission lines such as Fe xii 195 and Fe xiv 274. Prolonged hot emission is produced by preexisting loop material heated by the shock and by thermal conduction from the shock. However, the shapes and Doppler shifts of synthetic line profiles show significant discrepancies with observations. Furthermore, spatially and temporally averaged intensities are extremely low, suggesting that if the observed intensities from the quiet Sun and active regions were solely due to type II spicules, one to several orders of magnitude more spicules would be required than have been reported in the literature. This conclusion applies strictly to the ejected spicular material. We make no claims about emissions connected with waves or coronal currents that may be generated during the ejection process and heat the surrounding area.

Shanwlee Sow Mondal↗
NASA NTRSDate not supplied

Scale Resolving Jet Simulations to Reduce Airport Noise

- An emerging potential market has generated renewed interest in civil supersonic aircraft - Evidenced by the appearance of several commercial programs despite lack of standards for en route noise or landing and takeoff noise - Overland Flight Restrictions based on unacceptable sonic boom noise are viewed as the main barrier to this vision - National Research and Policy agencies play a central role in developing the data needed for the regulation change that is essential to enabling this new market - The vision of the Supersonics Community is a future where fast air travel is available for a broad spectrum of the traveling public - Future supersonic aircraft will not only be able to fly overland without creating an “unacceptable situation” but compared to Concorde and SST will be efficient, affordable, and environmentally responsible

ARMD↗
NASA NTRSDate not supplied

Enabling Architecture Trades and Design Exploration for Nuclear Electric Propulsion

Recent renewed interest in Nuclear Electric Propulsion (NEP) at NASA has driven the need for design space exploration and analysis of alternative architectures to evaluate performance and feasibility of NEP concepts. It has been over a decade since NASA last invested in Nuclear Electric Propulsion development efforts, and the landscape has shifted in both mission objectives and technology readiness levels. This also means that many of the engineering analyses and design frameworks tailored to NEP date back to the Jupiter Icy Moons Orbiter (JIMO) days of the early 2000s. Thus, a need was identified for updating and modernizing the modeling and simulation toolsets for NEP. This paper will detail the development efforts in the Marshall Space Flight Center’s Advanced Concepts Office, with a particular focus on the development of the NEP stage of the NEP-Chem vehicle. The paper will cover the various models used, and their current development status, as well as provide an overview of the integrated vehicle model and plans for further development.

Nuclear↗
NASA NTRSDate not supplied

Updating Lunar Subsurface Geotechnical Properties Based Upon Nonlinear Winkler Modeling of Apollo and Lunokhod Measurements

Returning human and robotic explorers to the lunar surface has identified a need for a renewed understanding of lunar geotechnical properties related to landing on and exploring the lunar surface. We review fundamental lunar geotechnical properties such as bulk density, cohesion, friction angle and shear strength, and apply new data derived from Apollo and Lunokhod geotechnical measurements to update the understanding of lunar regolith behavior. The analysis derives a new, nonlinear relationship of lunar geotechnical properties as a function of depth.

Lunar Geotechnical engineering↗
NASA NTRSDate not supplied

CERES FLASHFlux: Low Latency Data Product for Education and Applied Science Uses

The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed to provide a rapid release version of the CERES results, which are made available to the GLOBE (Global Learning and Observations to Benefit the Environment) program and the applied science research communities involving in the renewable energy and agricultural sectors within a week of the satellite observations by exchanging some accuracy for speed. FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Terra, Aqua, and NOAA-20 observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1-degree equal angle gridded data the combines Terra and Aqua observations. However, since both Terra and Aqua satellites are nearing end of life, the FLASHFlux data product will begin to transition to utilizing NOAA-20 observation in the TISA data product. The Visible Infrared Imaging Radiometer Suite (VIIRS) on board the NOAA-20 and the Moderate Resolution Imaging Spectroradiometer (MODIS) on board the Aqua satellites have different optics and spectral channels. We quantify the differences in the Level 2 SSF data products between the two satellites over a few sample months for cloud and radiative flux quantities for both the shortwave (solar wavelengths) and longwave (thermal infrared wavelengths) at TOA and surface. In addition, we also assess the impact of using NOAA-20 in place of Aqua in the Level 3 FLASHFlux TISA daily product on the TOA and surface radiative fluxes. Additionally, we highlight use case of FLASHFlux data product in combination with CERES EBAF to assess the Earth’s Radiation Budget, the accuracy of FLASHFlux data product compares to Surface sites measurement, and users of the FLASHFlux data through the POWER (Prediction of Worldwide Energy Resources) program.

PC Sawaengphokhai↗
NASA NTRSDate not supplied

The Complete Series of NU-LHT Lunar Simulants

The National Aeronautics and Space Administration (NASA) created the Constellation Program in response to the Bush Administration's A Renewed Spirit of Discovery: The President's Vision for U. S. Space Exploration, and the 2005 NASA Authorization Act from the United States Congress. As the Constellation program began its work, it was realized that the current supply of NASA lunar simulant (JSC-1) needed for testing of lunar surface system development, was almost exhausted. It was also realized that since global access was desired for future lunar exploration, both lunar mare and lunar highland simulants would be needed. Orbital Technologies Corporation (ORBITEC) was selected by NASA to produce a lunar mare simulant, which was referred to as JSC-1A, as it basically recreated the original JSC-1 using the same feedstock material from volcanic vents related to Merriam Crater near Flagstaff, AZ, and the same process by Dr. James Carter at the University of Texas at Dallas. For the lunar highlands, NASA collaborated with the United States Geological Survey (USGS) at the Denver Federal Center in Colorado, to develop and produce a new series of simulants.

J. E. Gruener↗
NASA NTRSDate not supplied

Electrochemical Recycling of CO2

Carbon dioxide (CO2) is a molecule that plays multiple roles in our universe. Currently, its impact on global warming has rightfully given CO2 a label as a harmful waste product that must be amply handled. Nonetheless, under other circumstances, and from other perspectives, CO2 could be regarded as a valuable resource. As example, in nature CO2 is an essential building block in photosynthesis ultimately yielding molecules and materials that we harvest for numerous applications ranging from energy storage and construction to medicines and food. In a similar manner, there is a growing interest to utilize atmospheric CO2 to generate renewable fuels and platform chemicals through artificial processes. These processes can replace fossil based industrial processes on earth alleviating climate impact, but they can also find uses far away from our planet. In space, CO2 is an important source of precious oxygen, however, it can also serve as feedstock for carbon-based molecules and materials that are needed to sustain societies at distant planets such as Mars. In this presentation, I will discuss the contemporary understanding of electrochemical reduction of CO2 for selective production of desired molecules. We will zoom in to the very atomic scale to gain mechanistic understanding of how the structure and composition of the cathode electrode affects product distributions. This information is used as guide in the design of new materials that convert CO2 more efficiently and more selectively. On this basis, opportunities for recycling CO2 under different conditions will be discussed, as will remaining challenges for the ultimate application towards the sustainable human living on earth and in space.

electrochemistry↗
NASA NTRSDate not supplied

Novel Tilting Ducted-Fan Aerial Vehicle Configurations

There has been recent renewed interested in ducted-fan, powered-lift vertical takeoff and landing aircraft vehicles for uninhabited aerial vehicle and urban aerial mobility aerial applications. Early work was conducted in the 1950’s to the late 1980’s into ducted-fan vehicles, especially at the time for military missions. The focus of ducted-fan research began to shift to UAV’s and personal air transportation in the 2000’s. Work in the early 2000’s fostered interest into ducted-fan aerial vehicles for vertical lift planetary aerial vehicle missions, especially for missions to Titan, a moon of Saturn. For example, early work at NASA Ames conducted the first known investigation into oval ducts (with internal tandem fans) to be used for these aerial vehicles. The use of twin oval ducts (with internal tandem fans) allowed the use of quadrotor-style rotor rpm control for vehicle trim (in hover, for transition to high-speed forward flight the addition of a tilt-actuator to pitch the twin oval ducts forward to be aligned with the freestream needed to be added to the control approach. This current study explores open-rotor, single isolated ducted-fan, and full vehicle configuration aerodynamic performance for hover, transition, and cruise regimes for novel tilting ducted-fan aerial vehicle configurations. The objective of this study is to better understand the design aerodynamics trade space for noncircular tilting ducted-fans. The primary analysis tool used in this paper is the mid-fidelity computational fluid dynamics RotCFD tool. Several interesting and largely unexplored rotor-on-rotor (or fan-on-fan), duct-on-rotor, rotor- on-duct, and duct-on-airframe are examined in this paper. Many of these aerodynamic interactions are the key to overall aerial vehicle performance. Limited parametric sweeps of rotor-to-rotor spacing (and, therefore, sizing and shape of the enveloping ducts) for the various duct configurations will also be performed. The trade-offs between duct thrust augmentation in hover versus improved transition controllability versus improved cruise L/D will be discussed for various novel duct configurations. These ducted-fan configurations include oval ducts, ‘figure-eight’ ducts, and ‘B-shaped’ ducts, among others.

Ducted-Fan↗
NASA NTRS2022

Satellite Data Applications for Sustainable Energy Transitions

Transitioning to a sustainable energy system poses a massive challenge to communities, nations, and the global economy in the next decade and beyond. A growing portfolio of satellite data products is available to support this transition. Satellite data complement other information sources to provide a more complete picture of the global energy system, often with continuous spatial coverage over targeted areas or even the entire Earth. We find that satellite data are already being applied to a wide range of energy issues with varying information needs, from planning and operation of renewable energy projects, to tracking changing patterns in energy access and use, to monitoring environmental impacts and verifying the effectiveness of emissions reduction efforts. While satellite data could play a larger role throughout the policy and planning lifecycle, there are technical, social, and structural barriers to their increased use. We conclude with a discussion of opportunities for satellite data applications to energy and recommendations for research to maximize the value of satellite data for sustainable energy transitions.

energy↗
NASA NTRSDate not supplied

Capabilities of Single Launch NTP and Chemical Spacecrafts for Cis-Lunar Tug Missions

Renewed interest in the region between the Earth and the moon suggests that a tug operating between these two destinations will be most likely required in the near future. This report details a parametric spacecraft model which sizes a nuclear thermal propulsion or chemical propulsion spacecraft and compares their payload transport capabilities for missions to the moon. A spacecraft sized to fit in a single launch vehicle is assumed, and six launch vehicles are investigated. Maximum spacecraft payload mass and minimum mission transit time are compared between nuclear and chemical propulsion spacecrafts. For vehicles sized to the maximum capability of a launch vehicle, payloads of at least five metric tons are possible with either propulsion option; with nuclear thermal propulsion able to provide additional mass or reduced transit time when the spacecraft is sized to the maximum capability of the heaviest-lift launch vehicles. Transit times to the moon with a five-ton payload could be reduced by at least 0.2 days with a nuclear propulsion system.

Cis-lunar tug↗
NASA NTRSDate not supplied

The Kinematic Navigation and Cartography Knapsack (KNaCK): Demonstrating SLAM (Simultaneous Localization and Mapping) LiDAR as a Tool for Exploration and Mapping of Lunar Pits and Caves.

Renewed interest in deep space exploration has made establishing a persistent human presence on the Moon and eventually Mars a priority. Sustained habitation of the Moon will require in-situ resource utilization (ISRU) and protection from radiation at the lunar surface. Lunar caves are of interest to the space community because they could provide shelter from radiation, access to water deposits, and a space for habitation, as well as hold information about the geology, volcanology, and evolution of the Moon. Developing the tools to explore, map, and characterize these voids is key to understanding the Moon as a planetary body and to establishing a permanent human presence there. Our team is currently developing tools that enable ultra-high resolution terrain mapping and navigation using mobile light detection and ranging (LIDAR) technology and simultaneous localization and mapping (SLAM) algorithms in fully GPS-denied and no-light environments. 3D mapping with LiDAR and SLAM is relatively under-used, particularly in the context of planetary exploration and planetary analog environments. The backpack mounted LiDAR instrument currently under development by the KNaCK (Kinematic Navigation and Cartography Knapsack) team has demonstrated the potential of mobile SLAM LiDAR for lunar, planetary, and terrestrial cave exploration, study, and utilization. A description of the instrument and associated SLAM algorithms used for mapping in GPS-denied environments are referenced here.

LiDAR↗
NASA NTRSDate not supplied

Alternative Treatment of Crew Wastewater Using a Hybrid Membrane Technology

Environmental Control and Life Support Systems (ECLSS) of future long-duration, deep-space human exploration missions should treat all “waste” streams for recovery and ideally by near closed-loop. Onboard the International Space Station (ISS), the Water Recovery System (WRS) does not treat urine and gray water to recover elements beyond water and utilizes physical-chemical technologies that operate with single-use and hazardous consumables. Urine offers a renewable source of nitrogen and other trace elements that can support sustainable crop production. In response to the lack of flight ready technologies capable of treating urine and gray water for water and nutrient recovery, a Suspended Aerobic Membrane Bioreactor (SAMBR) is under development between the University of South Florida and Kennedy Space Center. SAMBR is optimized for an early planetary base/partial gravity habitat and serves as a hybrid alternative to currently utilized urine treatment technologies and support closing the resource recovery loop. With its ECLSS minded form factor and modular design, SAMBR’s operation can be customized to suit the treatment objectives (i.e., nitrogen conversion) at that time. This proceeding presents preliminary research pertaining to: 1) design challenges in maximizing hydraulic throughput while minimizing mass and volume of the assembly; 2) capabilities for treating high nitrogen waste under steady and non-steady state conditions; and 3) measured performance parameters such chemical oxygen demand (COD), nitrogen conversion, nutrients, turbidity, and system throughput. Future research and development pertaining to further optimization on system safety, reliability, and expanded treatment capabilities will also be presented.

Membrane Filtration↗
NASA NTRSDate not supplied

Jet Noise Flyover and Scale Model Tests

Renewed interest in commercial supersonic flight has rekindled the need for accurate jet-noise predictions as this source is believed to dominate at aircraft takeoff conditions. The current study compares scale-model data acquired in the NASA Aero-Acoustic Propulsion Laboratory with data obtained using a well-instrumented Learjet 25 in a flyover test completed in September 2022. The flight test included 73 flyovers with engine conditions ranging from 1.5 to 2.0 engine pressure ratios and flight Mach numbers between 0.24 and 0.27. Acoustic data were acquired with an 800-ft linear ground plate microphone array. Wind speed data were acquired up to 1000-ft altitude with a ground-based LiDAR system. Layered ambient temperature, pressure, and humidity were acquired with a weather drone. A 6% increase in the physical scale factor for the scale-model data was found to reasonably align the peak frequencies of the scale-model and flight data and resulted in peak levels for the scale model being roughly 0.7 dB above those for the flight data at NPR = 1.56 and roughly 1 dB below those for the flight data at NPR = 1.91 in the peak jet-noise direction. Comparisons with the SAE ARP876 model were poor especially at emission angles greater than, or equal to, 110° and at high frequencies.

jet noise, supersonic transport↗