Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Relays”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Space Shuttle S-band antenna system

The NASA Space Shuttle Orbiter presents some very challenging antenna design problems for the S-band Orbiter to ground and Orbiter to relay satellite communications links. The line of sight to the ground and/or relay satellite during the various mission phases dictates an almost omni-directional coverage requirement, but the circuit margins require at least a 3 dB gain over this same coverage region. In addition, the environmental conditions imposed by the Orbiter mission dictate a flush mounted rugged antenna design. A number of potential antenna designs have been evaluated and found not to meet the Orbiter requirements. A small passive array of cavity backed spirals was found to offer the most potential to meet the design requirements. New circuit margin requirements presently under study have forced the consideration of the use of an active transmit/receive phased array design that considerably complicates the antenna design, but provides more than 10 dB of additional gain for circuit margin improvement.

Walton, M. D.↗
NASA NTRS1975

The use of LANDSAT DCS and imagery in reservoir management and operation

The author has identified the following significant results. The local user terminal has proven the hypothesis that a relatively inexpensive, automatic, and easily maintained ground receive station for satellite relayed data is practical for operational use. Data acquisition activities were expanded to include both the teletype-relayed information as well as that received directly from local user terminals.

Cooper, S.↗
NASA NTRS1974

Shuttle station, and satellite communications program

A parametric approach is developed to analyze and evaluate the performance of any link or links of a satellite relay system. The approach factors into the calculations the constraints of coherent radio frequency interference, multipath, and equipment design. The report is divided into three sections dealing with Spread Spectrum Techniques (Section 1), Power Budget Calculations (Section 2), and Required Capabilities and Design Factors for Tracking and Data Relay Systems TDRS (Section 3).

Lawsine, L.↗
NASA NTRS1976

Space-based solar power conversion and delivery systems study

Even at reduced rates of growth, the demand for electric power is expected to more than triple between now and 1995, and to triple again over the period 1995-2020. Without the development of new power sources and advanced transmission technologies, it may not be possible to supply electric energy at prices that are conductive to generalized economic welfare. Solar power is renewable and its conversion and transmission from space may be advantageous. The goal of this study is to assess the economic merit of space-based photovoltaic systems for power generation and a power relay satellite for power transmission. In this study, satellite solar power generation and transmission systems, as represented by current configurations of the Satellite Solar Station (SSPS) and the Power Relay Satellite (PRS), are compared with current and future terrestrial power generation and transmission systems to determine their technical and economic suitability for meeting power demands in the period of 1990 and beyond while meeting ever-increasing environmental and social constraints.

Source record↗
NASA NTRS1975

ATS-6 description

Basic design features of Applications Technology Satellite-6 (ATS-6) are discussed, and a variety of experiments carried out with the satellite is described. The 9.1 m reflector is a furlable 48-rib design. The earth viewing module housing most of the electronics is connected to the reflector by an A-frame truss made of graphic fiber reinforced plastic with excellent dimensional stability over a wide temperature range. The solar arrays, extended beyond the diameter of the reflector, are fixed hemi-cylinders consisting of 16 flat panels each. The communications system is an integrated multifrequency RF repeater capable of receiving up to 3 signals in any of 4 frequency bands (C, S, L, VHF) and retransmitting them on any desired frequency in 4 frequency bands (C, S, L, UHF). Results of the Tracking and Data Relay Experiment with GEOS-3 are summarized. Accuracies of 0.1 to 0.2 deg have been maintained in the programmed mode of tracking using the ATS-6 Digital Operational Controller, and communications links for the relay of 1.56 kilobit telemetry data from GEOS and for acquisition of range and range rate data performed as predicted or better.

Redisch, W. N.↗
NASA NTRS1975

Activities in space-based solar power development

Two space-based power concepts are considered. The satellite solar power system concept employs a large solar cell array to convert solar energy to electrical energy. The energy, in the form of microwaves, is transmitted to the ground where it is converted to dc power and transmitted to the utility network. According to the power relay satellite concept, power is generated on the ground at large stations in remote areas. The generated power in the form of microwaves is beamed for distribution to a relay satellite. Studies related to an investigation of the feasibility of the two concepts are briefly discussed.

Whitacre, W. E.↗
NASA NTRS1975

The Spaceflight and Tracking Data Network data handling system in the 1980's

The NASA Spaceflight Tracking and Data Network (STDN) in the 1980's will employ the Tracking and Data Relay Satellite System (TDRSS). The TDRSS includes a pair of geosynchronously orbiting communications satellites which will relay data from most NASA earth-orbiting spacecraft directly to a TDRSS ground station in the U.S. A description is given of the expected evolution of the STDN, the supporting NASCOM, and the integrated communications and data handling configurations that will be needed for NASA space missions in the 1980's.

Dickinson, W. B.↗
NASA NTRS1976

Space-based solar power conversion and delivery systems study. Volume 2: Engineering analysis of orbital systems

Program plans, schedules, and costs are determined for a synchronous orbit-based power generation and relay system. Requirements for the satellite solar power station (SSPS) and the power relay satellite (PRS) are explored. Engineering analysis of large solar arrays, flight mechanics and control, transportation, assembly and maintenance, and microwave transmission are included.

Source record↗
NASA NTRS1977

Multi-cell battery protection system

A multi-cell battery protection system is described wherein each cell has its own individual protective circuit. The protective circuits consist of a solid state comparator unit and a high current switching device such as a relay. The comparator units each continuously monitor the associated cell and when the cell voltage either exceeds a predetermined high level or falls below a predetermined low level, the relay is actuated whereby a bypass circuit is completed across the cell thereby effectively removing the cell from the series of cells.

Thomas, R. D.↗
NASA NTRS1978

Orbit determination accuracies using satellite-to-satellite tracking

The results of the ATS-6/GEOS-3 and the ATS-6/NIMBUS-6 satellite-to-satellite tracking orbit determination experiments are reported. The tracking systems used in these experiments differ from the Tracking and Data Relay Satellite System (TDRSS), primarily in the use of one rather than two synchronous relay satellites. However, the simulations mentioned indicate that the insights gained from the experiments with regard to proper data reduction techniques and expected results are applicable to the TDRSS.

Vonbun, F. O.↗
NASA NTRS1978

Digital automatic gain amplifier

A circuit is described for adjusting the amplitude of a reference signal to a predetermined level so as to permit subsequent data signals to be interpreted correctly. The circuit includes an operational amplifier having a feedback circuit connected between an output terminal and an input terminal; a bank of relays operably connected to a plurality of resistors; and a comparator comparing an output voltage of the amplifier with a reference voltage and generating a compared signal responsive thereto. Means is provided for selectively energizing the relays according to the compared signal from the comparator until the output signal from the amplifier equals to the reference signal. A second comparator is provided for comparing the output of the amplifier with a second voltage source so as to illuminate a lamp when the output signal from the amplifier exceeds the second voltage.

Holley, L. D.↗
NASA NTRS1979

Wide field/planetary camera optics study

Design feasibility of the baseline optical design concept was established for the wide field/planetary camera (WF/PC) and will be used with the space telescope (ST) to obtain high angular resolution astronomical information over a wide field. The design concept employs internal optics to relay the ST image to a CCD detector system. Optical design performance predictions, sensitivity and tolerance analyses, manufacturability of the optical components, and acceptance testing of the two mirror Cassegrain relays are discussed.

Source record↗
NASA NTRS1977

Shuttle Ku-band bent-pipe implementation considerations

This paper describes an approach for relay of data-modulated subcarriers from Shuttle payloads through the Shuttle Ku-band communications subsystem (and subsequently through a tracking and data relay satellite system to a ground terminal). The novelty is that a channel originally provided for baseband digital data is shown to be suitable for this purpose; the resulting transmission scheme is referred to as a narrowband bent-pipe scheme. Test results demonstrating the validity of the narrowband bent-pipe mode are presented, and limitations on system performance are described.

Batson, B. H.↗
NASA NTRS1978

The role of autonomous satellite navigation in the NEEDS program

A number of applications of autonomous satellite navigation are discussed. They include the onboard annotation of all experimental data and the onboard correction of imaging data. The accuracy levels required for each function are presented. Two alternative techniques for achieving autonomous satellite navigation are considered. One technique utilizes data from the Global Positioning System (GPS). The other approach utilizes data from a geosynchronous relay satellite system such as the Tracking and Data Relay Satellite System (TDRSS). The TDRSS approach makes use of one-way range and Doppler data along with a time transfer mechanism. Comparative accuracy levels for the onboard determination of position, velocity, and time based upon the GPS and TDRSS approaches are presented.

Fuchs, A. J.↗
NASA NTRS1978

Orbit determination accuracies using satellite-to-satellite tracking

The results are reported of the ATS-6/GEOS-3 and the ATS-6 Nimbus-6 satellite-to-satellite orbit determination experiments. NASA intends to use the tracking data relay satellite system for operational orbit determination of NASA satellites. Hence, in the near future, satellite-to-satellite tracking data will be routinely processed to obtain orbits. The satellite-to-satellite tracking system used in the ATS-6/Nimbus-6 and ATS-6/GEOS-3 experiments performed with a resolution of 1 to 2 m in range and less than 1 mm/s in range rate for a 10-s averaging. A Bayesian least squares estimation technique utilizing independent ranging to the synchronous relay satellite was determined to be the most effective procedure for estimating orbits from satellite-to-satellite tracking data. The use of this technique yields estimates of user satellite orbits which are comparable in accuracy to what is usually obtained from ground based systems.

Vonbun, F. O.↗
NASA NTRS1979

Laser aircraft

The concept of a laser-powered aircraft is discussed. Laser flight would be completely compatible with existing airports and air-traffic control, with the airplane using kerosene only power, up to a cruising altitude of 9 km where the laser satellite would lock on and beam laser energy to it. Two major components make up the laser turbofan, a heat exchanger for converting laser radiation into thermal energy, and conventional turbomachinery. The laser power satellite would put out 42 Mw using a solar-powered thermal engine to generate electrical power for the closed-cycle supersonic electric discharge CO laser, whose radiators, heat exchangers, supersonic diffuser, and ducting will amount to 85% of the total subsystem mass. Relay satellites will be used to intercept the beam from the laser satellite, correct outgoing beam aberrations, and direct the beam to the next target. A 300-airplane fleet with transcontinental range is projected to save enough kerosene to equal the energy content of the entire system, including power and relay satellites, in one year.

Hertzberg, A.↗
NASA NTRS1979

Advanced air transport concepts

The concepts of laminar flow control, very large all-wing aircraft, an aerial relay transportation system and alternative fuels, which would enable large improvements in fuel conservation in air transportation in the 1990's are discussed. Laminar boundary layer control through suction would greatly reduce skin friction and has been reported to reduce fuel consumption by up to 29%. Distributed load aircraft, in which all fuel and payload are carried in the wing and the fuselage is absent, permit the use of lighter construction materials and the elimination of fuselage and tail drag. Spanloader aircraft with laminar flow control could be used in an aerial relay transportation system which would employ a network of continuously flying liners supplied with fuel, cargo and crews by smaller feeder aircraft. Liquid hydrogen and methane fuels derived from coal are shown to be more weight efficient and less costly than coal-derived synthetic jet fuels.

Molloy, J. K.↗
NASA NTRS1978

Orbit determination accuracies using satellite-to-satellite tracking

Results of the ATS-6/GEOS-3 and the ATS-6/NIMBUS-6 satellite-to-satellite tracking orbit determination experiments to be applied to the NASA geostationary Tracking and Data Relay Satellite System (TDRSS) starting in 1980, are presented. A satellite radio or laser tracking system performed measurements of such parameters as range, range ratio, angles and direction cosines to a spacecraft relative to a given tracking station. Resolutions of 1 meter in range and .03 cm/sec in range rate for a 1 second averaging were achieved showing that with proper data reduction procedures the tracking data relay satellite system should provide orbit determination capability comparable to what is normally obtainable from ground based systems.

Vonbun, F. O.↗