Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ReEDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Atom Probe Tomography Analysis of the Distribution of Rhenium in Nickel Alloys

Atom probe tomography (APT) is used to characterise the distributions of rhenium in a binary Ni-Re alloy and the nickel-based single-crystal CMSX-4 superalloy. A purpose-built algorithm is developed to quantify the size distribution of solute clusters, and applied to the APT datasets to critique the hypothesis that rhenium is prone to the formation of clusters in these systems. No evidence is found to indicate that rhenium forms solute clusters above the level expected from random fluctuations. In CMSX-4, enrichment of Re is detected in the matrix phase close to the matrix/precipitate ({gamma}/{gamma}{prime}) phase boundaries. Phase field modelling indicates that this is due to the migration of the {gamma}/{gamma}{prime} interface during cooling from the temperature of operation. Thus, neither clustering of rhenium nor interface enrichments can be the cause of the enhancement in high temperature mechanical properties conferred by rhenium alloying.

36 MATERIALS SCIENCE↗

Experimental tests of stereological estimates of grain boundary populations

We present experimental validation of a method for estimating three-dimensional (3-D) relative numerical populations of grain boundaries from measurements of individual two-dimensional (2-D) cross-sections. Such numerical populations are relevant to network topology and the modeling of intergranular failure modes in grain boundary engineered materials, and are distinct from geometrical population measures such as area per volume. We examine 3-D reconstructions of stainless steel and copper, with varying populations of twin-related boundaries, generated by serial-section electron backscatter diffraction and high-energy X-ray diffraction microscopy. We show that 2-D length fractions, 2-D number fractions and 3-D number fractions are all distinct quantities when grain boundary type is correlated with grain boundary size. We also demonstrate that the last quantity may be reliably inferred from the first two, provided the experimental spatial resolution is much finer than the grain size, eliminating the need to use 3-D experimental methods to access at least some information about 3-D network properties. Many of the {Sigma}3 boundaries are extremely complex, with highly re-entrant shapes that can intersect a sample plane many times, giving a false impression of multiple separate boundaries.

36 MATERIALS SCIENCE↗

Strong and ductile FeNiCoAl-based high-entropy alloys for cryogenic to elevated temperature multifunctional applications

The highly tunable properties of multi-principal element alloys, commonly known as high-entropy alloys (HEAs), provide a remarkable potential for the development of superior materials for critical structural applications that involve extreme conditions. However, the optimization of the properties of HEAs has been primarily limited to behavior at either low or high temperatures. We report on a non-equiatomic, heterostructured, high-entropy alloy FeNiCoAlTaB which possesses remarkable combinations of mechanical properties across a wide range of temperatures from 77 K to 1073 K. The current metastable alloy presents good ductility and superior engineering tensile strengths of 2.2 GPa, 1.4 GPa, 800 MPa, and 500 MPa at 77 K, 298 K, 873 K, and 1073 K, respectively. This behavior is achieved by a synergic sequence of individual mechanisms that are activated at different temperatures. The alloy even displays pseudoelasticity at 77 K with an applied load up to 2 GPa. This work provides a methodology for tailoring structural heterogeneity and metastability in the design and fabrication of multifunctional HEAs that will outperform known metals and alloys over a wide range of temperatures.

36 MATERIALS SCIENCE↗

Elucidating geochemical response of shallow heterogeneous aquifers to CO2 leakage using high-performance computing: Implications for monitoring of CO2 sequestration

Predicting and quantifying impacts of potential carbon dioxide (CO2) leakage into shallow aquifers that overlie geologic CO2 storage formations is an important part of developing reliable carbon storage techniques. Leakage of CO2 through fractures, faults or faulty wellbores can reduce groundwater pH, inducing geochemical reactions that release solutes into the groundwater and pose a risk of degrading groundwater quality. In order to help quantify this risk, predictions of metal concentrations are needed during geologic storage of CO2. Here, we present regional-scale reactive transport simulations, at relatively fine-scale, of CO2 leakage into shallow aquifers run on the PFLOTRAN platform using high-performance computing. Multiple realizations of heterogeneous permeability distributions were generated using standard geostatistical methods. Increased statistical anisotropy of the permeability field resulted in more lateral and vertical spreading of the plume of impacted water, leading to increased Pb2+ (lead) concentrations and lower pH at a well down gradient of the CO2 leak. Pb2+ concentrations were higher in simulations where calcite was the source of Pb2+ compared to galena. The low solubility of galena effectively buffered the Pb2+ concentrations as galena reached saturation under reducing conditions along the flow path. In all cases, Pb2+ concentrations remained below the maximum contaminant level set by the EPA. Results from this study, compared to natural variability observed in aquifers, suggest that bicarbonate (HCO3) concentrations may be a better geochemical indicator of a CO2 leak under the conditions simulated here.

carbon sequestration↗

Simulating groundwater uptake and hydraulic redistribution by phreatophytes in a high-resolution, coupled subsurface-land surface model

Several new functions representing groundwater dependent vegetation were incorporated into a coupled subsurface-land surface model, ParFlow.CLM, in order to adequately describe groundwater water uptake, hydraulic redistribution, and plant water stress. The modified model was used to conduct three-dimensional, stand-scale simulations of a Mediterranean oak savanna in California. It performed well and captured daily, hourly and spatial water and energy dynamics, as well as groundwater evapotranspiration rates. The new model was then compared to various approaches, the original ParFlow.CLM and a version using a root water uptake compensation equation. During the dry season, the modified model closely predicted the measured transpiration rate while the original model predicted that it would become zero and the compensation approach overestimated it by nearly double. The modified model also allowed for analysis of several key ecohydrological processes, namely the hydraulic redistribution when plants were both active and dormant, the leaf water potential, and xylem cavitation.

54 ENVIRONMENTAL SCIENCES↗

Geospatial coherence of surface-atmosphere fluxes in the upper Great Lakes region

Surface-atmosphere fluxes are known to vary at multiple time scales, but uncertainty is high as to how fluxes change spatially within regions. With an increase in the number of eddy covariance towers, we are now able to examine the geospatial coherence of ecosystem fluxes, using time-series correlation. Eighteen sites from Michigan and Wisconsin were used in this study, ranging from 100 m to 600 km apart. Surface-atmosphere fluxes from a six-month period were used to quantify spatial coherence on a pair-wise basis. Using geospatial statistics, carbon and sensible heat (H) fluxes were found to be 95% correlated directly outside of their flux footprint and 56% correlated up to a distance of ~35 km. Latent (LE) and momentum (τ) fluxes were less correlated, 83% directly outside of their flux footprint and 40% at a distance of ~130 km albeit, at a much larger spatial distance than for the carbon and sensible heat fluxes. All fluxes showed strong spectral resonance at diel and seasonal timescales, with 1-, 2- and 3-month periods being common modes of variability among H, LE, and τ fluxes. Results based on Empirical Orthogonal Function show distinct transitions of net ecosystem exchange from fall to winter before photosynthesis or respiration while H and τ do not exhibit coherent trends. Here, this work demonstrates the potential of quantifying geospatial coherence of surface-atmosphere fluxes in the Midwestern United States, with the ability to predict fluxes beyond the spatial limit of a single flux tower footprint. Ultimately, expanding the flux measurements to larger scales would allow better spatial scaling of terrestrial surface-atmosphere fluxes between tower footprint and modeling or remote sensing scales.

54 ENVIRONMENTAL SCIENCES↗

Fine resolution remote sensing spectra improves estimates of gross primary production of croplands

Gross primary production (GPP) is a fundamental measure of the terrestrial carbon cycle critical to our understanding of ecosystem function under the changing climate and land use. Remote sensing enables access to continuous spatial coverage, but remains challenged in heterogeneous croplands. Coarse resolution products, like MOD17A (500 m), may aggregate fragmented land cover types commonly found in heavily managed landscapes and misrepresent their respective contribution to carbon production. Consequently, this study demonstrates the capability of fine-resolution imagery (20-30 m) and available red-edge vegetation indices to characterize GPP across seven Midwest cropping systems. Four sites were established on a 22-year-old USDA Conservation Reserve Program (CRP); and the other three on land conventionally farmed with corn-soybean-wheat rotation (AGR). We compare in situ GPP estimates from eddy-covariance towers with ten satellite models: eight variants of the vegetation photosynthesis models (VPM), of which five include a red-edge vegetation index, as well as conventional products Landsat CONUS GPP (30 m) and MOD17A2H V6 (500 m). Daily and cumulative fine-resolution imagery integrated within VPM generally agreed with tower-based GPP in heterogeneous landscapes more than those from MODIS 500 m VPM or conventional GPP products from MOD17AH V6 or Landsat 8 CONUS. Here, replacing EVI2 with red-edge indices NDRE2, NDRE1, and MTCI in Sentinel 2 VPMs notably improved explanation of variance and estimation of cumulative GPP. While existing methods using MODIS- and Landsat-derived GPP are important baselines for regional and global studies, future research may benefit from the higher spatial, temporal, and radiometric resolution.

54 ENVIRONMENTAL SCIENCES↗

Network of networks: Time series clustering of AmeriFlux sites

Environmental observation networks, such as AmeriFlux, are foundational for monitoring ecosystem response to climate change, management practices, and natural disturbances; however, their effectiveness depends on their representativeness for the regions or continents. We proposed an empirical, time series approach to quantify the similarity of ecosystem fluxes across AmeriFlux sites. We extracted the diel and seasonal characteristics (i.e., amplitudes, phases) from carbon dioxide, water vapor, energy, and momentum fluxes, which reflect the effects of climate, plant phenology, and ecophysiology on the observations, and explored the potential aggregations of AmeriFlux sites through hierarchical clustering. While net radiation and temperature showed latitudinal clustering as expected, flux variables revealed a more uneven clustering with many small (number of sites < 5), unique groups and a few large (> 100) to intermediate (15–70) groups, highlighting the significant ecological regulations of ecosystem fluxes. Many identified unique groups were from under-sampled ecoregions and biome types of the International Geosphere-Biosphere Programme (IGBP), with distinct flux dynamics compared to the rest of the network. At the finer spatial scale, local topography, disturbance, management, edaphic, and hydrological regimes further enlarge the difference in flux dynamics within the groups. Nonetheless, our clustering approach is a data-driven method to interpret the AmeriFlux network, informing future cross-site syntheses, upscaling, and model-data benchmarking research. Finally, we highlighted the unique and underrepresented sites in the AmeriFlux network, which were found mainly in Hawaii and Latin America, mountains, and at under-sampled IGBP types (e.g., urban, open water), motivating the incorporation of new/unregistered sites from these groups.

54 ENVIRONMENTAL SCIENCES↗

Extension of the discrete generalized multigroup method using SPH factors

The discrete generalized multigroup (DGM) method provides a way to treat the energy dependence of neutron transport similarly to the standard multigroup approximation. However, DGM uses an orthogonal basis to retain the energy dependence in higher-order terms. Using correction factors similar to traditional Superhomogénéisation (SPH) factors, the DGM method may be extended to produce cross sections that are homogenized over both space and energy. Additionally, since some fine-group energy dependence is retained, the resulting homogenized cross sections are more problem-independent than cross sections homogenized by SPH factors alone. In particular, a 44-group set of cross sections is collapsed to approximately a 1% error in the pincell fission densities for a test problem using three DOF per coarse energy group.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Self-powered Through-wall communication for dry cask storage monitoring

Many nuclear facilities, such as spent fuel storage dry casks and nuclear reactor pressure vessels, are entirely sealed by metal layers to prevent harmful radiation. For safety and security operations, the temperature, pressure, radiation, and humidity inside the vessel needs to be closely monitored. However, no practical technology is currently available to realize the through-wall data communication and monitoring for these vessels due to the inside harsh environment of high temperature and nuclear radiation. In this paper, an innovative self-powered wireless through-wall data communication system for the nuclear environment is presented, which demonstrates a successful solution to such challenges. The presented system is composed of four modules, i.e., energy harvester with power management circuits, ultrasound wireless communication using high-temperature piezoelectric transducers, electronic circuits for sensing and data transmission, and radiation shielding for electronics. Here, constitutive functions of each module were firstly designed and followed by the system integration. Experiments were conducted subsequently to validate the designed functions and evaluate the performance of the integrated system. Results showed that the average power of over 40 mW was harvested from the thermal flow inside the nuclear spent fuel canisters which could provide enough energy to operate the sensing and data communication systems. The gamma radiation test results showed that the thermoelectric energy harvester and ultrasound transceivers can withstand radiation dosing over 100 Mrad. Furthermore, temperature shock tests demonstrated that the entire system including the shielded electronics can survive and maintain their functionalities at temperatures as high as 195°C. Under the in-lab mocked-up high temperature conditions and radiation shielding, the proposed system is foreseen to survive and operate stably for fifty years inside a nuclear spent fuel canister, and send the frequency modulated data out of the canister for 3 s in every 10 min.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗